This blazer was worn by a Warrnambool Fire Brigade member (Jack Sizeland). It was part of the dress uniform for fire brigade members in the 1960s and 70s. The Warrnambool Fire Brigade was established in the early 1860s after a fire at the Flying Buck Hotel in Liebig Street prompted a public meeting to establish a permanent fire authority in the town. There had been a couple of attempts previously to set up a local fire brigade. The Warrnambool Fire Brigade actively participates in Country Fire Authority Championships and competitions and has been very successful, particularly in the 19th century. John (Jack) Sizeland retired when he was 65 in 1977 (37 years of service).This blazer is of interest as it shows us what fire fighters in Warrnambool were wearing in the mid 20th century (dress uniform). It is also a memento of one long-serving firefighter, Jack SizelandThis is a man’s black blazer with three large black buttons. The sleeve ends and the three pockets have a diagonal red and black patterned braid stitched on. The upper portion of the blazer and the sleeves are lined with black material. The top pocket has the badge of the Warrnambool Fire Brigade in red and yellow stitched on. The badge features a Fire Brigade helmet, a ladder and two axes set in two concentric circles. A printed label with the owner’s name (Sizeland) is stitched inside the collar areaName ‘Sizeland’ stitched inside collar areawarrnambool fire brigade, country fire authority, john sizeland, history of warrnambool

This coat was part of the Presbyterian moderator's regalia which also consisted of a tri-corn hat, black bib, lace jabot, britches, silk stockings, gaiters and buckled shoes.Black wool, lined cutaway coat with a crew neck. The coat has seven pairs of black buttons and is secured edge to edge with a single hook and eye at the 4th and 5th buttons. It has lace cuffs, braiding and pleats at the back. The black lining is quilted at the top and there is a pocket on the inside right breast. The sleeves of the coat are lined with white fabric and the lace cuffs are secured with six pearl buttons. There are faux pocket flaps on each side of the coat each secured with three buttons.presbyterian moderator, presbyterian moderator general of australia

Demonstrates uniform cap manufacture for a SEC Inspector and has a strong association with Theo Dunstan.A well used - SEC Inspectors/Conductors cap - black cloth exterior, grey cotton interior lining, brown leather internal hat band, on exterior with a plastic band at the front half of the cap terminating in two small SEC gold coloured metal buttons on either side, black plastic peak. Missing the Inspectors trip or "braid" Sewn to the inside top of the cap, a white label with red printing "Commonwealth Government Clothing Factories Melbourne" and stamped "6 5/8".tramways, trams, ballarat, uniforms, cap, inspectors

Part of a suite of decorated curtains, DAD-035-0001 to DAD-035-0005Though partial and damaged, these decorative 'ropes' are historically significant as evidence of further elaborate decoration of the curtain ensemble.2 lengths of decorative trimming; one piece longer (5.4m) than the other (4.5m). Essentially composed as long thin ropes of gold-coloured silk satin, stuffed with cotton wool, and twisted with a narrow gold-coloured woven metal braid. They function as soft, loose cords for ornamental draping around/in front of the curtains, perhaps on a pelmet (though no pelmet of valance survives). The longer piece contains 3 groups of furniture tacks for pinning the cord to enable loose, draped sections. interior decoration, curtain accessories, interior decoration - history

Police uniform peaked cap circa 1939-45. officer Pattern worn during WW2 period.Green police Hat. Top is green felt with bright green lines. Second level black felt around circumference of hat about 5 cm wide. Front peak Dark Green, plastic. Silver Rope Braid - two strands going from one ear around front to other ear. Nazi emblem on front with Swaztika and Eagle. On top small silver button with one dot in the middle. Inside lining is orange material with brown band around middle of rim.Size "55 1/2" Brand "Braunschweig" and some other indecipherable writing. uniform, german police, peaked cap, ww2

This uniform was worn by members of 8/13 Victorian Mounted Rifles from its formation in 1948 until replaced by battle dress and braided yellow lanyard. The 8th/13th Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment.Khaki World War Two style service dress jacket with two-colour platted lanyard, metal buttons, rising sun collar badges, metal 'Australia' titles on epaulettes. Teamed with khaki webbing belt. Mounted on half mannequin.uniform, citizen military forces, cmf, armour, vmr

Clothing. Dark navy blue and red peaked hat or cap, with peaked shade over the face, featuring two heavy gold leaves 12 cm long, and curved from the sides of the shade, to meet in the centre. These may be woven or moulded gold work.A 1 cm wide black patent ribbon is held across the lower crown of the cap, with 2 x 2 cm diameter brass buttons - one at each end. Narrow braid (probably once gold braid) edges the 5.5 cm deep crown of the cap, which is dark navy in colour. A flat dark navy top of the crown is lined, and shaped on the underside with red woollen fabric. This is shaped to be wider and higher at the centre front. Two eyelets on either side of this section, ventilate the crown of the cap. A brass metal ''music stand'' topped by a crown and an oak leaf and acorn wreath at the sides is attached to centre front. A 5 cm wide leather band lines the crown, which is also lined with red cotton fabric, and a diamond shaped plastic ''hair-oil protection'' at the top of the crown.Inside crown, on a plastic protector, is a small white sticker, showing the number 7, this is probably an indication of size.costume, male uniform, civilian, cap

This original tunic or jacket is part of the full dress uniform of the pre-Federation Victorian Permanent Artillery regiment. Its owner had the rank of Sergeant, as indicated by the three inverted chevrons. The Artillery design of the badges and buttons indicate the date of the tunic to be from 1893 to 1903. However the maker of the tunic, W. Moncton, began manufacture in Melbourne in 1899, so this the tunic can be dated between 1899 and 1903. The donor's grandfather was given this tunic but not the name of the original owner. It has since been suggested to the family that the tunic was worn by a local Western District Light Horse member. This could very well have been the case because mounted troops were officially referred to as the Light Horse in the late 19th to early 20th century. Several local men were involved in the Light Horse during the First World War. The donor's grandfather wore this tunic in the local district when riding a penny farthing bicycle. The donor's father also wore the tunic when dressed as a 'Captain' hosting a local disco dance. BRIEF MILITARY HISTORY- The Crimean War began In 1854 and many people in colonial Australia were afraid of a Russian attack. Volunteer forces were established to strengthen the British Imperial troops posted here. A battery of artillery was raised in Victoria as well as in other Australian states. In 1870 Australia became responsible for its own naval and military defence. The Volunteer Corps and Victorian Navy shared the responsibility of defending the existing forts, assisted by volunteer coastal and mobile field batteries. The Permanent Victorian Artillery force was established. It was disbanded in 1880 then re-formed in 1882 as the Victorian Garrison Artillery Corps. In 1895 the Geelong, Warrnambool, Port Fairy and Portland Batteries became part of the Western District Garrison Artillery. Many of the volunteers who served in the Artillery were from rural areas. They belonged to rifle clubs and were experience horsemen as well. Australia's defence at this time relied on these mounted troops, or Light Horse men. In 1899 the Victorian Garrison Artillery Corps amalgamated with the New South Wales and Queensland Permanent Artillery to become the Victorian Regiment of the Royal Australian Artillery (RAA). Then prior to Federation, the RAA and the Permanent Artillery of South Australia, Western Australia and Tasmania all combined, becoming the Royal Australian Artillery Regiment with two Batteries of Field Artillery; Battery A from Sydney and Battery B from Melbourne.This original uniform tunic of the pre-Federation Victorian Permanent Artillery is significant for its association with Australia's military defence and the fortifications of our district, state and country. The tunic is also significant, representing part of the history and evolution of uniforms in the Australian military forces. The tunic is also significant in its representation of Australia's independence in forming its own defences. The tunic has local significance in its connection with local social events.Tunic or jacket, part of the full dress uniform of the pre-Federation Victorian Permanent Artillery operating from 1893 to 1903. Original, single-breasted tunic of dark blue wool, red piping trim, black cotton lining in body. Sleeves lined with blue striped, white cotton. Front closure has eight brass buttons. Red band-style collar with hook-and-eye closure has gold bullion braid trim and a brass badge pinned each side at the front. Upper right sleeve has three inverted chevrons on red fabric with gold bullion braid trim (rank of Sergeant). Both sleeves have gold bullion braid 'Austrian knot' emblems stitched onto lower arm, with ends finishing on the inner sleeve. Shoulder epaulettes have red piping and smaller brass buttons. Closed back vent has vertical scalloped design with six brass buttons, in two columns of three, and red piping trim. Brass belt hook is attached to the left back waist, close to the seam (right side has a mark indicating a previous similar clip). Inside left breast is a concealed pocket. Tunic has both machine and hand stitching. All brass shank-style buttons have matching Artillery emblems with inscriptions on the back. The two brass collar badges have additional artillery emblems of exploding grenade and star as well as an inscription. Buttons were made for W. Moncton, of Melbourne and marked with his name. He traded from 1899, dating the tunic to between 1899 and 1903.Button front: Artillery emblem on front (field cannon facing left, in front of a muzzle-loading ram rod). Button back: engraved "W. MONCTON . MELBOURNE ." Collar badges: Artillery emblem (field cannon facing right | stars | exploding grenade | "AUSTRALIA")flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, uniform jacket, uniform tunic, garrison volunteer uniform, fortifications in victoria, victorian permanent artillery, pre-federation military uniform, sergeant's uniform, jacket, militia, victoria, victorian volunteer forces, victorian regiment, royal australian artillery, raa, field gun, sergeant, w. moncton, garrison, dress uniform, tunic, scarlet collar, red collar, scarlet piping, red piping, gold bullion, artillery emblem, light horse, artillery, mounted troops, victorian garrison artillery corps

This shaving set was used, mostly by men, to lather the face prior to shaving. Ornamental mugs such as this one were often given as presents. Today most men use electric shavers. This shaving set has no known local provenance and is kept for display purposes.This is a shaving set with a white china mug in the shape of a fish with a mouth where the excess water and lather are ejected and it has a handle in the shape of a fish’s tail. The top open section that contains room for the lather and water has white ornamentation around the outer section and has three holes inside for drainage. There is evidence of some gilt decoration around the mouth and eye of the fish and the open top section but this is now mostly rubbed away. The brush has a wooden handle with cotton braiding and hair (probably horsehair). The brush is a little worn. bathroom accessories, history of warrnambool

White card with pale blue scalloped edge. It is picture of a Scottish Highlander wearing a blue, yellow & black kilt and a red jacket with gold buttons & braid. He is wearing white spats & belt. He is holding a brown rifle with a white sling. He has red/black tartan socks, black shoes & a black & white sporran. Coloured rural scene behind him. The card was designed to stand up and the man's head is missing. A Happy Yuletide is printed in dark blue. Seaforth Highlander is printed at the bottom in grey.Printed in Germanyperson, greeting cards, malone collection, malone collection, greeting cards

Clothing. This petticoat is multi-layered with one layer of taffeta at the hemline, with black velvet, the top edge of which is scalloped-55 cms deep, and finished at the top edge - the scalloped edge, with a cotton braid 2mm deep. Two layers of tulle, over the taffeta, are gathered into a 1 cm wide waistband, which fastens with a metal hook, but no loop is visible. A 23 cm long plackett has a metal press-stud closure. Two cotton tape loops - 10.5 cm long are attached inside the waistband.costume, female underwear, black silk/ tulle/ velvet petticoat

Dress and bonnet was used on the childhood doll of Rosalie Whalen (nee Schwerkolt). Doll NA5163 and another dress NA5166.Doll, whose name was Janet was given to Rosalie Schwerkolt Whalen as a child in 1945 with a lemon voile dress and matching bonnet and a patterned voile dress.Lemon coloured doll's bonnet and match lemon coloured doll's dress. Dress has bodice with V shaped bib style collar two lines of blue stitching and pink and white variegated thread trim. Sleeves have pink braid with blue stitching vertically from armhole to cuff. Gathered skirt has three lines of blue stitching around hem line. Bonnet has frill and a sun visor trimmed with pink and white variegated thread. Doll is NA5163 and other dress is NA5166doll, dolls clothing, handmade, sewn

8th Hussars formed part of the Light Brigade which took part in the famous charge.Busby which belonged to C R Burn Esq 8th Hussars with metal box for hat and metal tube for plume. Busby was worn at Balaclava during the Crimean War 1854. Leather inner with brown fur outer covering; red cloth flap on right side; gold braid, white horsehair plume and red feathers at base or plume, gilt link chinstrap. The busby was presented as a gift to 8th/13th Victorian Mounted Rifles by its affiliated British regiment, 8th Queen's Royal Irish Hussars in 1954.On lid of hat box: " C R Burn Esq 8th Hussars" and "Hawkes and Co Piccadilly London"busby, hat, military, cavalry, hussars

This is the same gimp as on the curtains. Probably saved because it was beautiful and expensive, but inherently decontextualised from its original historic use.The detached gimp has some (but perhaps not much) historical significance, having some association with highly decorated suite of curtains DAD-035-0001. Length of decorative upholstery gimp, unpicked from original curtains and wound onto a piece of card for storage. Gimp is a type of upholstery trim. a flat tape made up of threads or fine cords forming a wave or chain design, held in place by another wavy cord to produce an openwork, geometric braid. In this item, the cords are respectively light blue and metallic gold (much of it tarnished to silvery colour). The gimp is en suite with the set of curtains and their ornaments (qv) - another luxurious trimming for expensive furnishings.upholstery trimmings

Refers to the service of Lt. Colonel "Roy Shadforth" 38 Bn NVR.1. Jacket - Ceremonial dress, black woollen. Brass AMF buttons. Northern Victorian Regiment. Brass Badges on collars - Major's Rank Badge. 2. Trousers - black ceremonial with red strip. 3. Whistle, pea. with lanyard, leather. 4. Sam Browne belt, tan leather, brass fittings. 5. Hat, peaked, black with gold braid on brim, green band NVR badge. 6.& 7. Gloves, leather, brown, lined. 8. Scabbard sword. Tan leather, silver top.38 bn, post ww2., roy shadforth, passchendaele barracks trust

Social The pants are of a woollen material with braided stripes down each side from top of waistline to bottom of cuff. The pockets are of cotton fabric. There is a fly opening at the front with three buttons and a metal hook and catch at the waist. There is a tightening band affixed to each side of the waist with a pull through metal catch. Six buttons are affixed to the inside of the waistband to allow for the attachment of braces. The waistline is satin and hessian lined. There are pockets on the left front and back and deep side pockets on each side. This is a spare set of trousers for the Tails suit in box 1010.clothing, tails suit trousers

Ceremonial Captains Rank Epaulettes. .1) & .2) Base is gold braided cord, 8 mm dia. 3 gold 'PIPs' are mounted on base. The PIPs have 4 spikes pointing outwards. In centre of PIPs green enamel leaves circular red enamel ring, Latin inscription: TRIA JUNCTA IN UNO, centre has 3 small gold crowns. The back has a red cotton strap. .3) & .4) As above except a) Aust Mil Forces gold button at one end on top; and b) The spikes are silvered.numismatics - badges (cloth) - army, passchendaele barracks trust, rank

This RAAF uniform is believed to have belonged to Flying Officer Russell Miller, the son of William and Muriel Miller of Warrnambool. Russell Miller attended Warrnambool High School and worked for the Warrnambool City Council before enlisting in World War 11. He was killed in flying operations over Germany in 1944. Died 28 Sept 1944. Remembered at Rheinburg War Cemetery, Nordrhein-Westfalen, Germany. More info @ https://cwgc.org/find/find-war-dead This uniform is a poignant memento of one Warrnambool's brave heroes of World War 11.1 The jacket is made of navy blue wool with a rever collar, four front pockets, eight buttons with air force insignia and navy cloth lining. The two sleeves have metal insignia and black and cream braiding. Above the front left pocket is a stitched blue and white applique. The jacket has a cloth belt with a rusted metal buckle. .2 The trousers are made of navy blue wool with two pockets, a buttoned fly and there are six buttons evenly stitched around the waist band. There is also a metal clasp on the waist band. RAAFraaf, flying officer russell miller, raaf uniform 1940's

Black fabric has a geometric type all-over silk embroidered pattern, woven into the fabric. Three panels of fabric make up the skirt, with a lower rounded panel at the hemline, to complete the circular skirt. Above the hemline, two bands 0f plain satin fabric, approximately three cms wide, are stitched in overlapping semi-circles, approximately six cms apart. Ends of these strips are cut to a point, and finished with a tiny black, glistening button. Waistline has a 2.5cm band, fastened with metal hook and eyes. Black fringed braid around hemline.costume, female, long black skirt with satin/button trim

Two Northern Dance Centres Studio Competitions small banners. One is white with gold printing. It has Northern Dance Centres Studio Competitions First Place May 1977 printed on it in a gold colour. The fringe at the bottom is painted on. It is hung by a small dowel and gold braid with dark gold ends at the top. The second is dark pink with yellow printing and painted on fringe. Printed on it is: Northern Dance Centres Studio Competitions Combined First November 1978. It has a couple dancing in the centre. It is hung by a small dowel with a gold cord and dark gold ends.ephemera, mementoes, northern dance centres studio compe, peter ellis collection, northern dance centres

Joseph Butterworth COOMBS (1842-1901), was an accountant who founded a successful mercantile trading company. At the time of his marriage to Caroline Mary MICHEL in 1869, Coombs had already purchased ten acres of Studley Park. The acreage included land on the west of Fenwick Street that extended along lower Stawell Street to the corner of Yarra Street, all of it connected directly to the Yarra environs. A right of way to Studley Park Road was on the title, though Coombs went on to purchase more land, some of which faced Studley Park Road. In addition to owning the Studley Park acreage, Coombs later acquired 1,201 acres of land abutting the Acheron River. While retaining the Kew property he became a Taggerty Councillor and was Shire President for a time. J.B. Coombs died at Acheron Station in 1901 (aged 59 years). A few months after, tenders were called to repair the Kew dwelling, the Fenwick Street property now appearing in records with the name ‘Hope Mansell’. Caroline Coombs remained at Hope Mansell until she died in 1924, survived by three sons and five daughters. Not long after her death, advertisements appeared for the sale of the Studley Park land. The sale seems to have been a mechanism for distribution of the Estate, as the following year the original ten acre holding was transferred to members of the family. The eldest daughter Mabel married William Younger who, with his brother Alexander, developed Younger and Mackie Courts, both south of Studley Park Road. [Research: Kerry Fairbank]In 1961, the granddaughter of Joseph and Caroline Coombs, Mabel Isola (Younger) Grattan, donated ten 19th century dresses and parasols to the Kew Historical Society. The costumes, now known as the 'Coombs Collection', are the earliest recorded items of clothing to enter the Society's collection. Each of the items in the Coombs Collection, of which this item forms a part, is historically, aesthetically and socially significant. As a collection, the costumes includes outstanding examples of morning wear, day dresses, wedding dresses, and clothing accessories, providing evidence of outstanding dressmaker skills in Victoria during the mid to late Victorian period. Single-piece, floor length, gold silk taffeta evening dress featuring the use of a very long fishtail train to which is attached a silk cord to allow the wearer to hold it above the floor. The dress includes a number of decorative features including the extensive use of box pleats on the sleeves and on the hem of the skirt; contrasting gold and cream braiding and tassles; and the extensive use of ruching on the bodice at the front. Due to the age and fine quality of the silk taffeta used, there is evidence of the degradation of the fabric on one shoulder and a tear in the rear of the skirt. Otherwise the dress is in excellent condition.fashion - 1870s, australian fashion, wedding dresses, costumes, women's clothing, coombs collection

Eliza Chamings nee Harris. William Harris. Ursula Chamings. Granny Harris.B/W photo Studio seated adults with standing child. adult daughter sitting in straight backed chair wearing light suit with braid on hem, long sleeved white blouse, father sittinginrolled armseatreceeding hair line and beard in grey three piece suit with fob watch, grand daughter Hair in ringlets bow in hair,lace collar briad yoke velvet? dress, mother black ornate bonnet with black ribbon tied to head black long sleeved dress sittin gin straight backed chair,Eliza Chamings nee Harris, William Harris, Ursula Chamings, Granny Harris. Reverse stamp W.J. Chapman Photo Stawellstawell

A Fid is a conical tapered wooden tool used for separating the strands of rope for splicing. They were a tool traditionally made of wood or bone used to work with rope and canvas in marlinespike seamanship. A Fid differs from a marlinspike in material and purposes. A marlinspike is used in working with wire rope, natural and synthetic lines also may be used to open shackles, and is made of metal. A Fid is used to hold open knots and holes in the canvas, and to separate the "lays" (or strands) of synthetic or natural rope for splicing. A variation of the Fid, the gripfid, is used for ply-split braiding. The gripfid has a jamming cleat to pull a cord back through the cord split by the fid's point. Modern Fids are typically made of aluminium, steel, or plastic. In addition to holding rope open to assist the creation of a rope splice, modern push fid's have markings for precise measurements in a variety of sizes of rope. The length of these fid’s is typically 21 or 22 times the diameter of rope to be spliced. Fids have been used since sailing vessels were first used to travel the worlds seas the tool was invented to be used to splice rope and with working with canvas sails. A Fid is a sailors tool that has maintained its general design for hundreds of years and gives a snapshot into what the working life was like for sailors on board sailing ships for hundreds of years. The tool in its original design is still in regular use today by recreational sailors all over the world to splice and join lengths of rope.Fid with Horn body and wood top.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A Fid is a conical tapered wooden tool used for separating the strands of rope for splicing. They were a tool traditionally made of wood or bone used to work with rope and canvas in marlinespike seamanship. A Fid differs from a marlinspike in material and purposes. A marlinspike is used in working with wire rope, natural and synthetic lines also may be used to open shackles, and is made of metal. A Fid is used to hold open knots and holes in the canvas, and to separate the "lays" (or strands) of synthetic or natural rope for splicing. A variation of the Fid, the gripfid, is used for ply-split braiding. The gripfid has a jamming cleat to pull a cord back through the cord split by the fid's point. Modern Fids are typically made of aluminium, steel, or plastic. In addition to holding rope open to assist the creation of a rope splice, modern push fid's have markings for precise measurements in a variety of sizes of rope. The length of these fid’s is typically 21 or 22 times the diameter of rope to be spliced. Fids have been used since sailing vessels were first used to travel the worlds seas the tool was invented to be used to splice rope and with working with canvas sails. A Fid is a sailors tool that has maintained its general design for hundreds of years and gives a snapshot into what the working life was like for sailors on board sailing ships for hundreds of years. The tool in its original design is still in regular use today by recreational sailors all over the world to splice and join lengths of rope.Metal Fid with a wooden bulb on top metal body tapering to a point. Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A Fid is a conical tapered wooden tool used for separating the strands of rope for splicing. They were a tool traditionally made of wood or bone used to work with rope and canvas in marlinespike seamanship. A Fid differs from a marlinspike in material and purposes. A marlinspike is used in working with wire rope, natural and synthetic lines also may be used to open shackles, and is made of metal. A Fid is used to hold open knots and holes in the canvas, and to separate the "lays" (or strands) of synthetic or natural rope for splicing. A variation of the Fid, the gripfid, is used for ply-split braiding. The gripfid has a jamming cleat to pull a cord back through the cord split by the fid's point. Modern Fids are typically made of aluminium, steel, or plastic. In addition to holding rope open to assist the creation of a rope splice, modern push fid's have markings for precise measurements in a variety of sizes of rope. The length of these fid's is typically 21 or 22 times the diameter of rope to be spliced. Fids have been used since sailing vessels were first used to travel the worlds seas the tool was invented to be used to splice rope and with working with canvas sails. A Fid is a sailors tool that has maintained its general design for hundreds of years and gives a snapshot into what the working life was like for sailors on board sailing ships for hundreds of years. The tool in its original design is still in regular use today by recreational sailors all over the world to splice and join lengths of rope.Fid, Metal and Wood top with brass ferrule between the two.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A Fid is a conical tapered wooden tool used for separating the strands of rope for splicing. They were a tool traditionally made of wood or bone used to work with rope and canvas in marlinespike seamanship. A Fid differs from a marlinspike in material and purposes. A marlinspike is used in working with wire rope, natural and synthetic lines also may be used to open shackles, and is made of metal. A Fid is used to hold open knots and holes in the canvas, and to separate the "lays" (or strands) of synthetic or natural rope for splicing. A variation of the Fid, the gripfid, is used for ply-split braiding. The gripfid has a jamming cleat to pull a cord back through the cord split by the fid's point. Modern fid's are typically made of aluminium, steel, or plastic. In addition to holding rope open to assist the creation of a rope splice, modern push fid's have markings for precise measurements in a variety of sizes of rope. The length of these fid's is typically 21 or 22 times the diameter of rope to be spliced. Fids have been used since sailing vessels were first used to travel the worlds seas the tool was invented to be used to splice rope and with working with canvas sails. A Fid is a sailors tool that has maintained its general design for hundreds of years and gives a snapshot into what the working life was like for sailors on board sailing ships for hundreds of years. The tool in its original design is still in regular use today by recreational sailors all over the world to splice and join lengths of rope.Wooden Fid with 3 rings around base of knob at the top of fid. Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Displayed in History House and Maritime Discovery Centre.Admella shipwreckSilver Medal awarded to James Kean by Victorian Colonists for Heroic Exertions, in saving life.. from the wreck of the Admella Silver Medal with detailed relief designs on both sides. Broken silver loop on top. Inverse: Detailed scene of a manned rowboat being launched to rescue a foundering ship. On horizon line are two ships with smoke stacks. A large banner and anchor design in the sky bears the words "Hope to the Last". Obverse: Laurel wreath and a braid motif encircle the central text. At top of design is a depiction of an eye and eyebrow with stylised rays radiating in semi-circle.Front: Inverse: The Admella Steamer wrecked on her passage from Adelaide to Melbourne of Cape Northumberland/ 6 August 1859 (around edge) Back: Obverse: Awarded to/James Kean/by the Victorian Colonists/for/heroic exertions,/in saving life/(under divine providence)/from the/wreck of the Admella.admella, portland lifeboat

Black trousers worn with tail coat 11400.670. Concealed button fly with two X 1 cm black buttons at waist and six X 1.5 cm black buttons along opening. Two X 1.7 cm black buttons inside waistline on either side of front opening. Small vent at centre back waistline, 1.7 cm button on either side. Double braid stripe full length on outside of trouser legs. Side pockets at front and two back pockets. Pockets lined with cream coloured linen fabric. Button fastener on LHS pocket.costume, male, black high waisted trousers