brass lamp as used on horse drawn buggies ca1900 as used by Holden and Frost on their manufactured horse drawn buggies square shaped brass buggy kerosene lamp with three glass sides and brass bars over glass with red dimple on brass rear doorbuggy lamp, coaches

Leather, shoulder belt with 12 leather pouches sewn onto belt. Brass buckle closer & brass studs to secure flaps on pouches.Rear of belt stamped in black ink: “CS”arms - accessories, leather, brass, passchendaele barracks trust

Mervyn Smith CBE was RACS President 1983-85 Antique rosewood brass covered box with brass inserted handles, tooled leather insert topBRASS PLAQUE ON LID: "PRESENTED TO THE ROYAL AUSTRALASIAN COLLEGE OF SURGEONS BY MERVYN SMITH, CHAIRMAN, COURT OF EXAMINERS 1975-19831983, racs, president, mervyn smith

2-cavity brass bullet mould for casting conical and round balls.bullets, weapons, brass

This bugle appears to have come from Kingdom of Württemberg, Germany.Brass bugle with Württemberg middle arms on top of bell and Yamaha mouthpiece"furchtlos und trew" on middle arms "Yamaha, Japan, 12" on mouthpiece "F.R. 122" engraved on rim of bell.bugle, brass, württemberg

“RANEE BELL” This bell originally adorned the cabin of the 12.6m yacht “Ranee”, built for a Doctor Craig of Sydney by the famous Logan Bros of Auckland New Zealand, she was launched as Heather in 1900. A subsequent owner renamed her “Ranee”. Her name reverted to “Heather” prior to being purchased, September 1919, by club members Joe White and David Cargill. Joe White purchased her outright in season 1920-21. He then presented the bell to the club to summon members attention to announcements in the club bar where it remains today and is used for the same purpose. It was also rung to draw attention to impending bar closing times, when it was rung 5 mins before closing, then at closing. Ironically Joe White, when applying for a Admiralty Warrant for Heather in 1924, found out she had previously been registered under the name of Ranee, and the only way to carry on that Warrant, was for him to change her name back to Ranee mid-way during the season. J.H. (Bert) Ferris 1/03/09Very significant - Squadron history - Yachting history AustraliaShips bell, brass, mounted on brass bracket,Ranee 1903brass, white, bell, ranee, heather, joe white, david cargill

The 2 vases were a gift to the museum .An eucumenical church service was held to mark the centenary of the procla. ..mation as a township November 17th 1985..2 brass vases placed on timber stands-.stands have inscriptionbrass vases with engravings .On timber base is inscription date 17th November 1985.

Brass plate from HMAS Melbourne (Aircraft Carrier) decommissioned 1980Australia only had two Aircraft carriers, HMAS Melbourne and HMAS SydneyBrass plateMain Broadcast wiring group box / Group, From, To, Location

Static wooden knife cleaner, with a brass plaque. Two pieces of wood with a cork inner piece, held together by elastic bands."J.L. Hinks Knife Cleaner Patented" on the brass plaque.

The bugle was most likely used in the First World War for ceremonial and military operational functions. Bugles were an effective means of passing fixed messages and times over the noise and distance of battles and battlefields. Henry Potter & Co was a well known manufacturer of military bugles for the First World War. Military copper bugle with brass trim and silver (?) mouthpiece with brass retaining chain. inscribed "Henry Potter & Co" "38 West Street, Charing X Road, London 1911"world war one, ww1, brass, musical instrument, bugle, henry potter

A tape measure on a reel contained in a leather circular case with a brass winding mechanism.Embossed makers details on leather case, serial number engraved on brass winder.j. rabone & sons

In 1910, a Union Jack flag was sent to Rutherglen State School No. 522 from a group of schools in Rutherglen Scotland, in exchange for an Australian flag previously sent to schools in Rutherglen Scotland. This exchange was part of the Empire Day Movement to celebrate Empire Day in 1911. It was one of nearly 300 flags that were exchanged between Australian and United Kingdom schools. The pupils of the woodworking classes of Rutherglen State School made this box to house the flag.Wooden box with brass plaque on lid.On brass plaque: "Presented to the School Children of Rutherglen, Victoria, Australia by their School Mates in Rutherglen Scotland. June 1910"schools, rutherglen scotland, rutherglen connection, rutherglen state school

Brass wood plane. This tools used for levelling and smoothing the surface of wood by paring shavings from it.Brass planeplanes (woodworking tool), woodworking tools

The lapel badge was made by Stoke and Sons 1855 - 1925. MCM Help The helpless is on this badge. It is unkown who MCM is?Has historic & socially significance as Stoke and Sons were a main maker and medals, tokens and badges from 1850's to today. This type of badge is a good example of the type of items they made and therefore has good interpretive capacity both for the badge and manufacture.Brass lapel badge with outer enamel front, white border (circular) with gold text, red centre with gold text, fine brass rope around outer edge and crossing over beneath red centre, hinged stick and loop closure.MCM Help The Helpless 1855 - 1925badge, brass, lapel

Brass stripe or bar awarded to Australian Service personnel while on Active ServiceSignificantThin brass barFront: Service wounded stripe. ss. Ltd-8 No 4 Prov Pat

Cups of this type were often used in pharmacies for grinding powders/medicinesBrass cup with handle on each side.brass, grinding cup, pharmacies, handled cup, measure

The artefact is a damaged brass cow bell recovered from the 1878 shipwreck of the LOCH ARD near Port Campbell. It was raised by Flagstaff Hill divers in 1973 and is in storage at the Maritime Village. The LOCH ARD was constructed on the Clyde in 1873 for the prestigious Loch Line of colonial clipper ships, designed for the Australian run. She sailed from England on 1 March 1878 carrying 37 crew, 17 passengers and a diverse general cargo ranging from luxury items to bulk railway iron. On 1 June 1878, emerging from fog and hearing too late the sound of breakers against the tall limestone cliffs, the vessel struck the southern foot of Mutton Bird Island and sank in 23 metres of water. Of the fifty-four people on board only two survived, one young male crewman and one young female passenger. A century later, despite the pounding seas and the efforts of looters, the wreck site continued to provide ample evidence of the extraordinary range of goods being imported into the Colony of Victoria in the post-Gold Rush era. Flagstaff Hill divers in the 1970s reported finds of “Bottles of champagne, window panes, rolls of zinc, barrels of cement, iron rails, clocks, lead shot, corrugated iron, lead, marble, salad oil bottles, ink bottles, copper wire, gin bottles, rolls of carpet, floor tiles, copper rivets, gas light fittings, pocket knives, toys, crystal chandeliers, beer mugs, cutlery, candles sticks, wick scissors, cow bells, and sauce bottles.” From this array of objects on the ocean floor emerged the humble brass cow bell. Cow bells were common to colonial agriculture and transport, used wherever animals were turned out to graze overnight and had to be rounded up again next morning. Bells were fastened around the necks of household milking cows, domestic goats, bullock teams, horse teams, and camel teams, to help find them in the pre-dawn light. Station shepherds and cattle drovers also used them to warn of any disturbances to their flocks and herds overnight. The bells were a necessary item in a largely unfenced continent. So important, that Anthony Mongon began making his pot-bells at Yackandandah from 1861, August Menneke produced the “Wagga Pot” from 1867, and Samuel Jones started manufacturing his distinctively shaped “Condamine Bell” in 1868. However, these deeply resonant Australian bells were made from iron — Mongon and Jones were blacksmiths who simply beat old pitsaw blades into shape. Few genuinely brass cow bells were made here, the vast majority being imported from Britain where the industry of brass founding was already well established. (Some bells were also imported from the United States, but these too were nearly all of iron).This bell is historically significant as typical of a cow bell used by farmers and herdsmen in Colonial Victoria. Its significance is increased by being one of a collection of artefact recovered by the Flagstaff Hill Divers from the wreck of the Loch Ard in the early 1970s. Items that come from several wrecks along Victoria's coast have also been recovered for Flagstaff Hill Maritime Village’s museum collection under Government permit, illustrating this item’s level of historical value. The cow bell is also significant for being part of Flagstaff Hill’s collection of artefacts from LOCH ARD, which is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the LOCH ARD. The LOCH ARD collection is archaeologically significant as the remains of a large international passenger and cargo ship. The LOCH ARD collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the LOCH ARD, which was one of the worst and best known shipwrecks in Victoria’s history.A small brass cow bell, in poor condition. It is blunt-wedge shaped. The sides expand outwards from the smaller rectangular roof of the bell to a larger open rectangle or bell mouth. A handwritten label is attached to the bel. Recovered from the wreck of the Loch Ard.Label text "["10/6/73, Brass Cow Bell, LOCH ARD, Found in the sandy hole in the centre of the wreck site. Cow bells were part of the cargo" - "10/6/73, LOCH ARD, small brass cow bell salvaged by FHMV divers"]. "LOCH ARD / PETER RONALD"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, eva carmichael, mutton bird island, loch ard gorge, brass cow bell, colonial cow bells, 1878 shipwreck, shipwreck artefact, flagstaff hill divers

8HP Blackstone Lamps Start Oil Engine engine number 71076 Engine Details Maximum operating RPM of 240. Fitted with a 3'9" Flywheel Tested on the 6th of November 1908. Shipped to Cluter buck South Australia for installation on concrete base. Recovered and restored during the 80's in South Australia Purchased privately in 2013 in Tailem Bend South Australia and transported to Victoria. Currently on loan to the Puffing Billy Museum at Menzies Creek as an operating exhibit. Blackstone & Co. was a farm implement maker at Stamford, Lincolnshire, United Kingdom. In 1896 they built lamp start oil engines. The Lamp or hot-bulb engine (also hotbulb or heavy-oil engine) is a type of internal combustion engine. It is an engine in which fuel is ignited by being brought into contact with a red-hot metal surface inside a bulb, followed by the introduction of air (oxygen) compressed into the hot-bulb chamber by the rising piston. There is some ignition when the fuel is introduced, but it quickly uses up the available oxygen in the bulb. Vigorous ignition takes place only when sufficient oxygen is supplied to the hot-bulb chamber on the compression stroke of the engine. Most hot-bulb engines were produced as one-cylinder, low-speed two-stroke crankcase scavenged units Historic - Industrial - single cylinder, horizontal, 4 stroke, hot-bulb ignition oil engine Blackstone 8HP Oil Engine made from steel, wrought iron and brassOval Plate with Black Stones and Clutter Buck Brass Plaque engine number 71076blackstone, oil engine, clutter buck, black stone, puffing billy, hit and miss, engine, blackstone & co

Owned by Mr Franz Streizel circa 1895.A travellers small brass inkwell in a square brown leather covered case or box. There is a brass inkwell under the lid with a tiny lever to open it.'Ink' is written in elaborate gold lettering on the lid of the leather case. The brass lid inside has a pattern embossed onto it.writing equipment, inkwells, ink pots

Leslie William Cole was born on 31 January 1920 in Albury, the first child of William James Cole and Gwendoline Fair. Les spent most of his childhood living with his grandparents in Bethanga, Victoria. In 1934 when he finished school, Les moved into Wodonga. His first job was at Mates Timber Yard. He later worked for Mylons of Wodonga driving taxis and buses. In 1939 after completing militia training, Les applied to enlist with the RAAF and eventually trained as an Aircraft Mechanic. He was posted to the 6th Squadron, serving in Port Moresby, Milne Bay and Goodenough Island before returning to the RAAF base in Sale, Victoria. On discharge. Les returned to Wodonga and resumed working with Mylons. After a range of jobs, Les and his wife Lorna operated a shop in Ariel Street, Wodonga. In the community, Les was a founding member of Wodonga Lions Club. He also joined the Civil Defence which was a predecessor off the SES. He became the Communications Officer and trained other members. Les became the first Controller of the Wodonga Branch of the State Emergency Service, a position he held for 17 years. The new SES headquarters was named in his honour. In retirement he also worked as a Volunteer Community Driver. Les was also named Wodonga Citizen of the Year in 1984 Les continued living in Wodonga until the age of 103 in 2023, when he moved to Melbourne to be closer to his children. He passed away on 12 December 2023. These lighters are part of his collection of memorabilia and artefacts.These items belonged to a respected member of the Wodonga community.A collection of 4 different cigarette lighters made from metal alloys. The brass lighter has a black cloth pouch.On long cylindrical lighters: Unicorn INT Made in China and Safety Instructions On silver lighter: An Appreciations from Stuart's Shepparton On brass lighter: Peter Jackson Brass No/ 6cigarette lighters, les cole

The brass cornet was owned by early Australian Jazz musician and multi-instrumentalist Benny Featherstone Benny Featherstone is considered "one of the most fascinating and gifted musicians in the history of Australian jazz" (Johnson, Oxford Companion to Australian Jazz, p 154). Once described as "Australia's Louis Armstrong"Buescher brass cornetTrue tone. Pat. Oct 89.07 287335 LP 262 The Buescher Elkhart Ind. U.S.A.benny featherstone, prince of good fellows, thirties, jazz musician, melbourne jazz musician, drummer, 1930 s, buescher cornet, trumpeter, trombonist, clarinetist, pianist, early australian jazz

Eltham Shire Council Health Department Inspectors - possibly used for stamping meat Cross Ref: EDHS_01870-13 - Dianne Yans, Health Inspector, undertaking inspections at Safeway Supermarket, 1989Self inking rotating brass roller with "ESC" raised surfaces in four locations at 90 degrees. Roller mounted between two brass arms contacts a felt pad (dampened with ink - red residue evident) covered by pivoting brass cover; with fromed wooden handle Stamped on side of brass support arms M. Lober P/L Melbourne Pat Pend 3198 \ 6eltham shire council, health inspector, shire of eltham, meat stamp