The Corps of Royal Australian Electrical and Mechanical Engineers (RAEME) has the major responsibility for the maintenance, recovery and repair of the Army's electrical and mechanical equipment.australia. army. corps of royal australian electrical and mechanical engineers - history, military engineering - australia - history - 20th century

Yields information about the view of The Courier, and locals about the mooted closure of the tramway system and reporting on the proposal, possible Trolley Buses from Adelaide.Foolscap sheet of plain paper, with rounded corners, with 8 newspaper cuttings, concerning the mooted closure of the Ballarat Tram system April 1962. All from The Courier, unless noted otherwise. 1 - "Saving the Trams" - 7-4-62 - about staffing and bus services 2 - "GBA to support Saving of Trams" - 7/4/62 - Greater Ballarat Association decides to support the tram services - quotes President Mr B C Hedgcock. 3 - "Tram support" - 13-4-62 - Amalgamated Engineering Union support for the trams. 4 - "Decision on Trams Postponed" - 13-4-62 - advising that the Minister of Electrical Undertakings advised that the motion to close the Ballarat system has been delayed by 6 months 5 - "Trams and buses" - 13-4-62 - quoting Mr Risson that trams are safer and comparing them to buses. 6 - "Save the Trams" - 16-4-62 - support from the Ballarat Trades and Labour Council 7 - "Trolley Bus Offer" - 16-4-62 - reporting on the offer of the MTT Adelaide of surplus trolley buses to the City - not well received. 8 - "Bendigo Tram Loss" - 16-4-62 - SEC reporting on Bendigo loss. closure, letter to the editor, editorial, sec, greater ballarat association, unions, trolley buses, adelaide, bendigo

Book - 16 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard C.43-1927, "Parallel sided carbon brushes for DC Commutator Machines". Dated Dec. 1927. Provides an index and information about carbon brushes including drawings.On top right hand corner has stamp of the "The Electric Supply Co. of Victoria Ltd Ballarat" and date "19 May 1928".trams, tramways, tramways, electrical equipment, motors

Book - 36 pages + light grey covers, pushed by the British Standards Institution, British Standard No. 827 - 1939, titled "Radio-Interference Suppression for Trolley Buses and Tramways". Provides an index page and many drawings.On top right hand corner has stamp the SEC stamp, Ballarat Branch and a received dated of 6 Oct. 1939. Has "Mr Morrison" in pencil on the cover.trams, tramways, tramways, electrical equipment

.1 - Book - 16 pages + light grey cover, issued by the British Engineering Standards Association, British Standard Specification for Tramway Axles. Dated August 1921. Has standard Number 101-1921. Provides materials specification, testing and an index. Inside the front cover is a typed quarto sheet, that has been folded into four referring to the standard and "Amendments suggested to clauses 1, 8, 9 , 12 and 13". .2 - Book - 24 pages + grey covers, - Tentative Australian Standards specification for Tramway Axles, published by the Australian Commonwealth Engineering Standards Association, No. C 44 - 1927. Provides materials specification, testing and an index. .3 - Book - 28 pages + light grey cover, issued by the British Engineering Standards Association, British Standard Specification for Tramway Axles. Dated August 1921. Has standard Number 102-1930. Provides materials specification, testing and an index. On front cover and inside cover has amendments and a note that the British standard had been endorsed by Australian Standard C44 in Dec. 1933..1 - has the stamp of the "Tait Book Co. 39 Queen St. Melbourne" .2 - has in the top right hand corner, the ESCo Ballarat company stamp and the date "31 May 1928" .3 - on front cover stamp " Library Copy M.E.S." and a library label noting that the book is on loan from the Melbourne library and is dated 22/1/1935. Provides materials specification, testing and an index. On the lower edge has the stamp of the "Tait Book Co. 39 Queen St. Melbourne".trams, tramways, tramways, electrical equipment, axles

.1 - Book - 20 pages + light grey cover, issued by the British Engineering Standards Association, British Standard Specification for "Cast Steel Wheel Centres for Electric Tramcars". Dated April 1922. Has standard Number 150-1922. Provides materials specification, testing and an index. .2 - Book - 16 pages + light grey cover, issued by the British Engineering Standards Association, British Standard Specification for "Wrought Iron Wheel Centres for Electric Tramcars". Dated April 1922. Has standard Number 149-1922. Provides materials specification, testing and an index. Both copies has the stamp of the "Tait Book Co. 90 William St. Melbourne" on the lower edge and in the top right corner, the ESCo Ballarat company stamp and the date "14 September 1923". trams, tramways, tramways, electrical equipment, wheels

Book - 24 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard C.2 - 1925, "Electrical Performance of Traction Motors - Direct Current Series Wound". Dated Dec. 1925. Provides an index and information about enclosures, ratings, testing and information to be supplied.On top right hand corner has stamp of the "The Electric Supply Co. of Victoria Ltd Ballarat" and date "17 April 1934".trams, tramways, tramways, electrical equipment, motors

.1 - Book - 8 pages + grey covers, side stapled, issued by the Australian Standards Association, "Electrical Voltages and electrical frequencies for new installations ", C1 (a&b) - 1926, December 1926. .2 - Book - 36 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Overhead Line wire material for telegraph and telephone purposes", C3-11-1925, November 1925. .3 - Book - 20 pages + brown covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Telephone cable, paper insulated lead covered", C12 - 1928, January 1928. .4 - Book - 24 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Marking for Switchboard bus-bars and connections" C13 - 1925, December 1925 - with a pasted green label noting that the "tentative standard is now endorsed as Australian Standard without amendment" - dated Oct. 1930. .5 - Book - 32 pages + grey covers, side stapled, issued by the Australian Standards Association, Tentative Australian Standard "Dimensions and Resistances of Bare Annealed Copper Wire for Electrical Machinery and Apparatus", C 18-1926, October 1926. .6 - Book - 12 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard "Slate Slabs for Electrical Purposes", C19 - 1926, July 1926. .7 - Book - 16 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Moulded Flat Top Insulation Bushes" C20-1926, October 1926. .8 - Book - 16 pages + brown covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Australian Standard "Insulation dimensions and resistance of enamelled plain copper wire for instruments and apparatus" C21-1928, January 1928. .9 Book - 20 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Watertight Glands for electric cables" C22-1926, September 1926. .10 - Book - 20 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Air-break knife switches and laminated brush switches for voltages not exceeding 660Volts" - C23 - 1926, August 1926" On top right hand corner has the date stamp of the "The Electric Supply Co. of Victoria Ltd Ballarat" trams, tramways, power station, standards, materials, electrical systems

.1 - Book - 20 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Air-break knife switches and laminated brush switches for voltages not exceeding 660Volts" - C23 - 1926, August 1926" .2 - Book - 24 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Flame proof air break switches for Voltages Not Exceeding 600Volts", C25-1926, October 1926. .3 - Book - 24 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Flame proof air break circuit breakers for Voltages Not Exceeding 600Volts", C26-1926, October 1926. .4 - Book - 24 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Totally Enclosed air-break Circuit Breakers for Voltages not exceeding 660 Volts" - C27 - 1926, September 1926. .5 - Book - 24 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Totally Enclosed air-break Switches for Voltages not exceeding 660 Volts" - C28 - 1926, December 1926. .6 - Book - 24 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard "Metallic Resistance Materials for Electrical Purposes" - C29-1926, November 1926. .7 - Book - 28 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Face Plate controllers and resistances for use therewith Electric Motors (DC and AC Slip ring)" - C31-1926 - December 1926. .8 - Book - 28 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Australian Standard "Contactor Controllers and Resistances for use therewith Electric Motors (DC and AC Slip ring)" - C32-1926 - December 1926. .9 Book - 36 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Electrical Performance of Industrial Electric Motors and Generators with class A insulation" - C34-1927, October 1927 with a green label dated September 1932 advised that the tentative standard has been endorsed as a Standard with amendment. .10 - Book - 56 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Electrical Performance of Large Electric Generators and Motors - Rating permitting overloads" - C35-1927, April 1927 with a green label dated September 1932 advised that the tentative standard has been endorsed as a Standard with amendment. On top right hand corner has the date stamp of the "The Electric Supply Co. of Victoria Ltd Ballarat" trams, tramways, power station, standards, materials, electrical systems

.1 - Book - 56 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Electrical Performance of Large Electric Generators and Motors - Continuous Maximum Rating" - C36-1927, May 1927 with a green label dated September 1932 advised that the tentative standard has been endorsed as a Standard with amendment. .2 - Book - 48 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Electrical Performance of Alternators of the Steam Driven Type" - C38-1927 - December 1927 with a green label dated September 1932 advised that the tentative standard has been endorsed as a Standard with amendment. .3 - Book - 32 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Electricity Meters" C39-1927, August 1927. .4 - Book - 28 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Pressboard for Electrical Purposes" - C40-1927, January 1927. .5 - Book - 24 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Hard Drawn copper stranded circular conductors for overhead power transmission purposes" C41-1930, August 1927, with a green label dated October 1932 advised that the tentative standard has been endorsed as a Standard with amendment. .6 - Book - 48 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard "for Indicating Ammeters, Voltmeters, wattmeters, frequency and power factor meters" - C42-1927 - December 1927, with a green label dated October 1932 advised that the tentative standard has been endorsed as a Standard with amendment. .7 - Book - 32 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Instrument Transformers" - C45-1928, June 1928. .8 - Book - 28 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Australian Standard "Liquid Starters for Electric Motors" C46-1927, December 1927. .9 - Book - 20 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Australian Standard "Star Delta switch starters for Electric Motors" C47-1927, December 1927. .10 - Book - 24 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Australian Standard "Multiple switch starters for Electric Motors" C48-1927, December 1927. On top right hand corner has the date stamp of the "The Electric Supply Co. of Victoria Ltd Ballarat" trams, tramways, power station, standards, materials, electrical systems

.1 - Book - 28 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Contactor Starters for Electric Motors" C49-1927, December 1927. .2 - Book - 56 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Dimensions of insulated annealed copper conductors for electric power and light including voltage tests" C50-1928, June 1928. .3 - Book - 36 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Vulcanised Fibre for Electrical Purposes" C51-1928, May 1928. .4 - Book - 16 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Bus-bars and connections constructed of bare copper or aluminium" C52-1928, May 1928. .5 - Book - 16 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Fixed Condensers for Radio Reception Purposes" - C53-1928, February 1928. .6 - Book - 32 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard "Graphic (Recording or chart recording) ammeters, voltmeters and wattmeters." C54-1928 March 1928. .7 - Book - 20 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "5-Amp two pin wall plugs and sockets for domestic purposes (without earthing connection)" C55-1928, August 1928, .8 - Book - 24 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard "Electric Cable Soldering Sockets" C56-1929, March 1929. .9 - Book - 8 pages + brown covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Australian Standard "Graphical Symbols and Schedule of Outlets for the Electrical Equipment of Buildings" C64 and 65-1935, October 1935. .10 - Book - 24 pages + brown covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Australian Standard "Porcelain Insulators for overhead powerlines and outdoor switching Structures" C67-1939, August 1939. On top right hand corner has the date stamp of the "The Electric Supply Co. of Victoria Ltd Ballarat" for items .1 to .8, SEC stamp on .10. trams, tramways, power station, standards, materials, electrical systems

.1 - Book - 56 pages + grey covers, side stapled, issued by the British Engineering Standards Committee "Electrical Machinery excluding motors for traction purposes", No. 72-1917, September 1917. Has "Commonwealth Engineer" label along the bottom edge. .2 - Book 28 pages - light grey covers, side stapled, issued by the British Engineering Standards Association, "Insulating oils for use in Transformers, oil switches and circuit breakers" No. 148-1923, April 1923. Has a Tait Book Co. stamp along the bottom edge and ESCo date stamp 1 Oct. 1925. Printed by Gaylard & Sons London. .3 - Book 72 pages - light grey covers, side stapled, issued by the British Engineering Standards Association, "Tungsten Filament Electric Lamps" No. 161-1925, August 1927. Has a Tait Book Co. stamp along the bottom edge and ESCo date stamp 15 Feb. 1928. Printed by Waterlow & Sons London. .4 - Book 48 pages - light grey covers, side stapled, issued by the British Standards Institution, "Metal Sheathed paper insulated plain annealed copper conductors for electricity supply including voltage tests" No.1 48-1933, March 1933. Has a Tait Book Co. stamp along the bottom edge and ESCo date stamp 15 Feb. 1928. Printed by Waterlow & Sons London. trams, tramways, power station, standards, materials, electrical systems

Black folder containing photocopied documents pertaining to the setting up and running of the Central Deborah Mine, Bendigo. 1939 - 1948. Original copies held in McColl,Rankin & Stanistreet Collection. Application for Permit. Ministry of Post War Reconstruction. War Organisation of Industry. Quotes, Tenders. Hume & Iser. T.J Jorgensen. Electricity Supply Department. Saunders & Ross. District Telephone Office. R Toma. Stock Exchange. Building Site Plan. Abbott Supply Co. F.W. Milne & Son. The Golden City Agricultural Implements. Department of Labour and National Service.Miller & Co. Thompson Engineering and Pipe Co. Gold Boring and Prospecting. Costs. J.l. Howard. A.J. William Electrical Instruments.bendigo, mining, central deborah gold mine

School of Mines Ballarat is predecessor of Federation University Foolscap sized list of Subjects from Ballarat School of Mines with handwritten names.8S3S in large writng on the back school of mines ballarat, practical chemistry, mr. walker, theoretical chemistry, theoretical agricultural chemistry, practical agricultural chemistry, technical chemistry, metallurgy, alfred mica smith, metallurgical calculations, metallurgy of gold and ore dressing, assaying practical, assaying dry, mr. murphy, ore dressing practical, mining, mining geology, mineralogy, geology, petrology, botany, applied mechanics, mr hart, mine surveying, land surveying, steam and gas engines, mr gilchrist, elementry electricity & magnetism, electrical technology, mr sutherland, turning and fitting, mr connon, engineering drawing, mr kerr, geometry, algebra, trigonometry, physics, conics, calculus, mr whitington, building construction, plane and solid geometry, plumbing grade, mr hall, mr mullins, carpentry, wool classing, materia medica, mr gutheil, technical arithmatic, mr hutchison, telegraphy, mr williams, sloyd, mr slater, photography, mr campbell, manual training, cyanide, mr deane, mr brittain, mr martell, english, astronomy, list of subjects

Specification or report - 6 A4 pages, photocopied titled "A class tram - Melbourne, Australia". Gives the detail of the tramcar, classification, developers (builders and suppliers), description, history, vehicle performance, dimensions, suspension, propulsion, braking, electrical and control systems and body specifications and a list of work done at Preston Workshops.trams, tramways, a class, commonwealth engineering, comeng, aeg, duwag, bogies, the met, new trams

Report - 32 pages centre stapled, printed on foolscap paper, has an index (see image i2), report of the Royal Commissioner Sawyer titled "Report on the Status and Affairs of the State Electricity Commission of Victoria and the scope and working of the State Electricity Commission Acts". Looks at the financial situation of the Commission, its management, equipment, power supply systems, Newport, technical issues, hydro power stations, Yallourn, problems with brown coal, use of Richmond Power station Signed by author on rear page. Note: At the time of cataloguing very little found on Mr. W. Sawyer - see reference in Trove for meeting with Sir John Monash - http://trove.nla.gov.au/newspaper/article/3737172/446386 and International Electrical Engineers - http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=5217646, that he died 1/3/1966, age 93 - had been associated with Electric Street Railway companies, the Railway Engineering Department of General Electric and the firm Ford Bacon and Davis in New York City. For scan of full document see htd2104i3.pdf - downloaded from the Parliamentary web site - 29/7/2018.In the top right hand sector "J.P.S. just to let you know that I have appreciated your many courtesies and kindnesses HHS - 28/5/26". On rear page, has been signed by Willits H. Sawyer.trams, tramways, secv, power supply, royal commission, newport power station, richmond power station

Instruction - 5 pages - duplicated foolscap sheets - headed "MMTB Engineering Department - Workshops and Running Shed Branch" - titled "Duties of Electrical Mechanics - Runningsheds" Details electrical work to be done on tramcars at the 100 hours service; trolley pole, electrical equipment, controllers, switches, resistance boxes, line breakers, RC units, motors, governor, compressor, lighting, buzzers, door engines, wipers, brake cylinders and general body eg handrails. Dated May 1970.trams, tramways, depot, safety, workshops, electrical equipment, instructions, procedures

Instruction - 3 pages - duplicated foolscap sheets - headed "MMTB Engineering Department - Workshops and Running Shed Branch" - titled ""RC2 and EE RC1 Controller Maintenance - Electrical Mechanics Procedure" Details electrical work to be done on the rostered day in for RC1 and EE.RC1 controllers, safety, checking, when to replaced and additional work to be done on the 4th rostered day-in service. Dated May 1970.trams, tramways, depot, safety, workshops, electrical equipment, instructions, procedures, controllers

Instruction - 3 pages - duplicated foolscap sheets - headed "MMTB Engineering Department - Workshops and Running Shed Branch" - titled "K35 JJ, K35 AA2 Controller Maintenance - Electrical Mechanics Procedure". Details electrical work to be done on the rostered day in for K35 JJ and K35 AA controllers, safety, checking, when to replaced and additional work to be done on the 4th rostered day-in service. Dated May 1970.trams, tramways, depot, safety, workshops, electrical equipment, instructions, procedures, controllers

Instruction - 4 pages - duplicated foolscap sheets - headed "MMTB Engineering Department - Workshops and Running Shed Branch" - titled "EECK1 (Clyde) Controller Maintenance - Electrical Mechanics Procedure" Details electrical work to be done on the rostered day in for EECK1 (Clyde) controllers, safety, checking, when to replaced and additional work to be done on the 4th and 12th rostered day-in service. Dated May 1970.trams, tramways, depot, safety, workshops, electrical equipment, instructions, procedures, controllers

Instruction - 3 pages - duplicated foolscap sheets - headed "MMTB Engineering Department - Workshops and Running Shed Branch" - titled "RC1 and RC2 remote control unit boxes - Electrical Mechanics Procedure" Details electrical work to be done on the rostered day in for RC1 and RC2 remote control unit boxes maintenance, checks, adjustments, safety, testing and closing the boxes. Dated May 1970.trams, tramways, depot, safety, workshops, electrical equipment, instructions, procedures, controllers

Instruction - 2 pages - duplicated foolscap sheets - headed "MMTB Engineering Department - Workshops and Running Shed Branch" - titled "Line Breakers GE and EE type - Electrical Mechanics Procedure" Details electrical work to be done on the rostered day in for GE and EE type line breakers, maintenance, checks, adjustments, safety, testing and closing the boxes. Dated May 1970.trams, tramways, depot, safety, workshops, electrical equipment, instructions, procedures, controllers

Instruction - 1 pages - duplicated foolscap sheets - headed "MMTB Engineering Department - Workshops and Running Shed Branch" - titled "K35JJ, K35 AA2, RC1, RC2, EECK1 (Clyde) controller maintenance - Tradesman's assistant procedures" Details electrical work to be done on the rostered day in for the work to be carried out assisting the Electrical Mechanic on his work, including lubrication. Dated May 1970.trams, tramways, depot, safety, workshops, electrical equipment, instructions, procedures, controllers

Instruction - 3 pages - duplicated foolscap sheets - headed "MMTB Engineering Department - Workshops and Running Shed Branch" - titled "RC1 and RC2 remote control unit boxes -Tradesman's assistant procedures" Details electrical work to be done on the rostered day in for RC1 and RC2 remote control unit boxes by the Tradesman's assistant for the Electrical Mechanic. Dated May 1970.trams, tramways, depot, safety, workshops, electrical equipment, instructions, procedures, controllers

Instruction - 9 pages - duplicated foolscap sheets - headed "MMTB Engineering Department - Workshops and Running Shed Branch" - titled "Electrical Faults on Tramcars". Details trouble shooting electrical faults, fuses, controllers, defects, tramcar driving faults, line breakers, use of bridging sticks. Prepared by R. J. Tippett, Senior Foreman. Dated May 1970.trams, tramways, depot, safety, workshops, tramcars, repairs, instructions, procedures, controllers, electrical equipment

Photocopied 140 page document titled "MTA Engineering & Maintenance Change Projects", produced by the MTA, 11/12/1987 setting out the proposal changes to MTA staff, use of contractors, consultation with the unions, consultation with unions, has a table of contents, index. Looks at construction activities, building maintenance and track maintenance, electrical and vehicle maintenance for the rail and tram divisions.trams, tramways, ptc, unions, tramways, railways, mta, workshops

Specification or report - 3 A4 pages, photocopied titled "New Non-articulated tramcar for Melbourne" with notation "(Z1 & Z2 class trams" above heading in ink. Gives the detail of the tramcar, classification, developers (builders and suppliers), description, history, contract price, warranty, vehicle performance, dimensions, suspension, propulsion, braking, electrical and control systems and body specifications.has "See Fraser Donaldson at lunchtime" in ink along the top of the first page and "(Z1 & Z2 class trams" above heading in ink.trams, tramways, z class, commonwealth engineering, comeng, asea, mmtb, new trams