Showing 3055 items
matching joining
-
Southern Sherbrooke Historical Society Inc.
Rolling Pin, Before 1940's approximately
Belonged to Elizabeth Downard after she was married (circa early 1940's). Was used by her until the 1990's. Donated to Southern Sherbrooke Historical Society by Susan Heywood-Downard.Wooden cylindrical central part with wooden handles on either side joined to a metal rod in which extends the length of the rolling pin. Used to flatten dough.cooking -
Whitehorse Historical Society Inc.
Article, Or councils to discuss link plans, 1972
Photocopy of an article about Ringwood's agreement to join in a regional conference of councils to discuss the future of local government.Photocopy of an article about Ringwood's agreement to join in a regional conference of councils to discuss the future of local government. Cr Stan Morris was appointed to the agenda committee.Photocopy of an article about Ringwood's agreement to join in a regional conference of councils to discuss the future of local government.city of nunawading, city of ringwood, amalgamations -
Whitehorse Historical Society Inc.
Document, Mitcham Community Hospital, 01/05/1933
Leaflet about proposed establishment of a Mitcham Community Hospital, with joining form.Leaflet about proposed establishment of a Mitcham Community Hospital, with joining form. Provisional Committee Members; N. Armstrong, S. Cochrane, M.J. Hoath and others.Leaflet about proposed establishment of a Mitcham Community Hospital, with joining form. hospitals, armstrong, norman, stacey, c., hoath, m.j., cochrane, stanley, dr.. -
Whitehorse Historical Society Inc.
Domestic object - Tea Pot Cover
White cotton tea cover with pulled thread embroidered surrounded by button hole embroidery. Two semi-circle pieces joined together with blue ribbon.handcrafts, needlework, manchester, table linen -
Glenelg Shire Council Cultural Collection
Plan - Plan - subdivision at Cape Bridgewater, 02/04/1992
Black and white photocopy of an old plan of a subdivision at Cape Bridgewater. In two halves, not joined together. Black texta numbers on some of the lots 1 - 28town planning, residential, cape bridgewater -
Glenelg Shire Council Cultural Collection
Plan - Ship Plan / Mould, n.d
Wooden pattern for mould for boat fitting. Cylinder, made in 2 halves, joined with wooden dowels. Round knob attached to either end. Painted green. -
Whitehorse Historical Society Inc.
Clothing - Jabot
Two half circle shaped knitted with mercerised cotton (very fine) with lace peaked edge. Long straight piece joining the two ends together.costume, female -
Falls Creek Historical Society
Equipment - Ski Equipment - Rope Tow Wheel, Nutcracker and Belt, 1951
FALLS CREEK ROPE TOWS Toni St Elmo brought back plans for a Hamilton rope tow from New Zealand. He had a rope tow built in the summer of 1950-51 and it went into operation the following winter. Skiers were charged 10/- per day to use it. Skiers held onto the rope with a locking device called a ‘nutcracker” attached to a webbing belt. This tow, known as the Nissen Tow, continued to operate until 1960. Bob Hymans installed a shorter portable rope tow for his guests at Skyline from 1954. Other tows included the Village Tow and the Nursery Tow. Eventually most of the tows were taken over by Alpine Developments. From 1960 onwards they were gradually replaced by T-bars and then later on by chairlifts. This belt is from the original rope tow used between 1951 and 1960 in the Falls Creek ski lifts. These items are significant because were part of the earliest rope tows constructed at Falls Creek.A canvas waist belt with leg hoops and metal joining and hook used to attach skier to the rope tow. The wheel is also a damaged component of the Rope Tow.falls creek, nissen alpine club, rope tows, toni st elmo -
Bendigo Military Museum
Equipment - WHISTLE, ARMY, Premier Wire Works
Part of the Kevin John Herdman, No. 397661, Collection. See Catalogue No. 5942P for details of his service record.Metal military whistle with ring attached. Brown leather strap joined to the ring. Slot on end of strap. Whistle stamped with date of manufacture and manufacturer's name.Stamped in whistle mouthpiece: 'PREMIER WIRE WORKS, MELBOURNE, AUSTRALIA'. Stamped on side: “1943 (upwards arrow)”whistle, kevin john herdman -
Bendigo Historical Society Inc.
Newspaper - JENNY FOLEY COLLECTION: SUNDAY BEST
Bendigo Advertiser ''The way we were'' from 2003. Sunday best: the Children of the Allies join a pageant after World War 1. The clip is in a folder.newspaper, bendigo advertiser, the way we were -
Wodonga & District Historical Society Inc
Photograph - Fred Rochow Railways Collection - Mick Seymour, C. 1985
The Fred Rochow Railways Collection incorporates photos related to the operation of the Wodonga Railway Station including different types of trains and railways staff C. 1930 – 1990. It was donated to the Wodonga Historical Society by Fred Rochow, a railwayman who spent many years based in Wodonga. He joined the Victorian Railways on 17th June l947 and retired in 1988. For some time, he was a member of the Australian Federated Union of Locomotive Enginemen and served a term as a member of the Trades Hall Council. He had an extensive knowledge of the struggles that took place to achieve better conditions for railway workers. Fred worked for many years as a fireman and then worked his way up the ranks to driver, experiencing many changes from the days of steam locomotives through to diesel trains, locomotives and even the modern XPT train. He worked throughout Victoria at different stages of his career, with his final working years focused on the northeast of Victoria and the Albury to Melbourne line. After his retirement, Fred continued to share his love of steam miniature trains with the community.This collection has local and statewide significance as it captures images of trains, locomotives and personnel who operated the railway services in Wodonga and throughout Northeast Victoria. The railways played a critical role in opening up Victoria and connecting Australia for trade, business, social communication and transport.Mick Seymour joined the Victoria Railways at Benalla on 6 September 1948. He transferred to Wodonga on 1 April 1949. He passed his driver qualifications at Wodonga on 22 April 1955. Mick was AFULE Branch Secretary for 11 years between 1957 and 1971. He retired on 17 April 1985.railways wodonga, fred rochow, wodonga railway men, mick seymour -
Churchill Island Heritage Farm
Functional object - T Square tool, Printer's plate 1887 on; T square 1890
Samuel Amess, who bought Churchill island in 1872 was a Presbyterian Scot as also was James Balfour. There may have been a personal link.T square made from printer's plate, metal and wood, riveted together with 10 rivets and a hanging hole in top centre of wood.One side, metal: Balfour, Elliott and Company Limited/ Incorporated under the Companies Statute 1884 /20 Queen St MELBOURNE / Capital L250,000 in 250,000 shares of L1 each / This is to certify that... / is the property of .../ Part of circle printing in join with wood and scroll work on metal at join. Other side: scratched in "H R Balfour"james balfour, e.c elliott, balfour, presbyterian, t square, square, tool, tools, amess, samuel, churchill island -
Kiewa Valley Historical Society
Bibs - Bogong Primary School
Bogong Primary School opened in 1941 to provide an education for the employees of the State Electricity Commission of Victoria. The school had up to date equipment and received glowing reports from school inspectors. It closed c1986.The Bogong State School was opened for the children of S.E.C.V. workers who lived in Bogong in a remote part of north east Victoria. The nearest school would have been 14 miles away and over mountain roads subject to heavy construction traffic and extremes of climatic conditions.6 bright orange 'bibs' from Bogong Primary School. Used to identify a team in eg. sport. Each bib has 2 coloured squares which are hemmed and joined to each other with 2 elastic pieces on the outside at the top (to fit over the head) and on each square joining the 2 squares, 2 white bias binding pieces on the outside at the bottom (for the arms to go through.)team bibs. bogong primary school. education. state school. -
Flagstaff Hill Maritime Museum and Village
Domestic object - Tobacco Pipes, circa 1869
This concretion of tobacco pipes is one of a group of artefacts in the McCulloch Collection. It was recovered from the shipwreck of the Victoria Tower. The pipes may have been amongst the ship's cargo but could have been included in a passenger’s personal effects. The object is now one of the shipwreck artefacts in Flagstaff Hill’s Mc Culloch Collection, which includes items recovered from the wrecks of the Victoria Tower (wrecked in 1869) and Loch Ard (wrecked in 1878). They were salvaged by a diver in the early 1970s from the southwest coast of Victoria. Advanced marine technology had enabled divers to explore the depths of the ocean and gather its treasures before protective legislation was introduced by the Government. The artefacts were donated to Queensland’s Department of Environment and Heritage Protection (EHP) by a passionate shipwreck lover and their locations were verified by Bruce McCulloch. In 2017 the Department repatriated them to Flagstaff Hill where they joined our vast collection of artefacts from Victoria’s Shipwreck Coast. The Victoria Tower: - The three-masted iron clipper ship was built in 1869 in Liverpool, England, as a passenger and cargo ship for the Australian trade. She was named after one of the two towers of the British Houses of Parliament and owned by the White Star line. The Victoria Tower sailed under the command of Captain Kerr from Liverpool towards Melbourne on her maiden voyage. She carried 34 passengers and 16 crew plus a general cargo including bottled beer, slates, iron pipes and hardware. She was almost at her destination when she was wrecked on 17th October 1869 at Point Impossible, west of Thompsons Creek, Breamlea. The shipwreck is a very popular dive site.The artefact is an example of cargo or personal items on board a ship in 1869. It provides a reference point for classifying and dating similar items. The artefact is significant for its association with the clipper ship Victoria Tower, which is listed on the Victorian Heritage Register as S698. The Victoria Tower is recorded as the most intact historic shipwreck accessible between Point Lonsdale and Cape Otway. The Victoria Tower is one of only seven shipwrecks in Victoria that have had more than 100 objects recovered from them reported as a result of the Commonwealth Amnesty held in 1993-94.Concretion of clay tobacco pipes. Bowls and stems of several broken orange tobacco pipes are joined together in ac irregularly shaped clump of concretion from the sea. The concretion also contains stones, shells, sand and particles of seaweed. It was recovered wreck of the ship Victoria Tower.flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum and village, shipwreck coast, great ocean road, shipwreck artefact, wreck dive, mcculloch collection, bruce mcculloch, white star line, victorian heritage register, clipper ship, victoria tower, captain kerr, shipwreck victoria tower, migrant ship 1869, cargo ship 1869, iron clipper, british clipper ship, 1869, cargo imported to australia, pipe cluster, concretion of pipes, pipe, ceramic pipes, tobacco pipes, smoker's pipes -
Tatura Irrigation & Wartime Camps Museum
Document, Institute for Irrigation and Salinity Research, 1987
Visitors' guide to activities on display for 50th Anniversary 1937-1987. October 23-24, 1987 days of display.Cream card cover. Blue printing, aerial vies of Institute. Map of areas affected by work of local Institute group. Pages joined by staples and not attached to coverfruit, salinity, soils, rural, industries, agriculture -
Flagstaff Hill Maritime Museum and Village
Furniture - Chair, Late 19th to early 20th century
Originally the Bow Chair started off life with the name of the ‘Smoker’s Bow Chair’ where originally, it wasn’t designed for grandeur like many chairs of the time, but instead was designed for practicality and comfort. The original Smoker’s Bow Chair was a simple chunkier version of the Windsor Chair design which first appeared in the 1820’s. Although it lacked the high back found on any Windsor Chair of the time, it maintained a heavier, sturdier appearance. The main feature was a hoop or bow which was fashioned from steamed wood. This was then curved to make both the back support and arms. The chair also consisted of a wide seat, supported by 4 splayed, spindle legs. In its original form it was found in many country kitchens of the day as well as in many inns and public houses throughout the United Kingdom. Its name of the "Smoker’s Bow Chair" because the sweeping armrests were the perfect height to support a smokers arm when smoking a pipe.A significant piece of furniture from the late 19th century designed for a specific purpose, smoking. These chairs are now highly collectable and valuable today and avidly sought by collectors of antique furniture.Chair wooden dark brown "Smoker's Bow" chair, with wide and deep seat with broad arms, turned spindles and thick turned legs joined by a double stretcher.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, chair, furniture, captains chair -
Flagstaff Hill Maritime Museum and Village
Bucket
Bucket leather with 2 side seams and bottom piece joined by stud. Has straps with metal ring through one side for handle. Top is very brittle.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and Village
Furniture - Chair, Late 19th to early 20th century
Originally the Bow Chair started off life with the name of the ‘Smoker’s Bow Chair’ where originally, it wasn’t designed for grandeur like many chairs of the time, but instead was designed for practicality and comfort. The original Smoker’s Bow Chair was a simple chunkier version of the Windsor Chair design which first appeared in the 1820’s. Although it lacked the high back found on any Windsor Chair of the time, it maintained a heavier, sturdier appearance. The main feature was a hoop or bow which was fashioned from steamed wood. This was then curved to make both the back support and arms. The chair also consisted of a wide seat, supported by 4 splayed, spindle legs. In its original form it was found in many country kitchens of the day as well as in many inns and public houses throughout the United Kingdom. Its name of the "Smoker’s Bow Chair" because the sweeping armrests were the perfect height to support a smokers arm when smoking a pipe.A significant piece of furniture from the late 19th century designed for a specific purpose, smoking. These chairs are now highly collectable and valuable today and avidly sought by collectors of antique furniture.Chair wooden dark brown "Smoker's Bow" chair, with wide and deep seat with broad arms, turned spindles and thick turned legs joined by a double stretcher.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, chair, furniture, smokers chair, bow chair -
Flagstaff Hill Maritime Museum and Village
Furniture - Chair, Late 19th to early 20th century
Originally the Bow Chair started off life with the name of the ‘Smoker’s Bow Chair’ where originally, it wasn’t designed for grandeur like many chairs of the time, but instead was designed for practicality and comfort. The original Smoker’s Bow Chair was a simple chunkier version of the Windsor Chair design which first appeared in the 1820’s. Although it lacked the high back found on any Windsor Chair of the time, it maintained a heavier, sturdier appearance. The main feature was a hoop or bow which was fashioned from steamed wood. This was then curved to make both the back support and arms. The chair also consisted of a wide seat, supported by 4 splayed, spindle legs. In its original form it was found in many country kitchens of the day as well as in many inns and public houses throughout the United Kingdom. Its name of the "Smoker’s Bow Chair" because the sweeping armrests were the perfect height to support a smokers arm when smoking a pipe.A significant piece of furniture from the late 19th century designed for a specific purpose, smoking. These chairs are now highly collectable and valuable today and avidly sought by collectors of antique furniture.Chair wooden dark brown "Smoker's Bow" chair, with wide and deep seat with broad arms, turned spindles and thick turned legs joined by a double stretcher.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, chair, furniture, smokers chair, bow chair -
Flagstaff Hill Maritime Museum and Village
Furniture - Chair, Late 19th to early 20th century
Originally the Bow Chair started off life with the name of the ‘Smoker’s Bow Chair’ where originally, it wasn’t designed for grandeur like many chairs of the time, but instead was designed for practicality and comfort. The original Smoker’s Bow Chair was a simple chunkier version of the Windsor Chair design which first appeared in the 1820’s. Although it lacked the high back found on any Windsor Chair of the time, it maintained a heavier, sturdier appearance. The main feature was a hoop or bow which was fashioned from steamed wood. This was then curved to make both the back support and arms. The chair also consisted of a wide seat, supported by 4 splayed, spindle legs. In its original form it was found in many country kitchens of the day as well as in many inns and public houses throughout the United Kingdom. Its name of the "Smoker’s Bow Chair" because the sweeping armrests were the perfect height to support a smokers arm when smoking a pipe.A significant piece of furniture from the late 19th century designed for a specific purpose, smoking. These chairs are now highly collectable and valuable today and avidly sought by collectors of antique furniture.Chair wooden dark brown "Smoker's Bow" chair, with wide and deep seat with broad arms, turned spindles and thick turned legs joined by a double stretcher.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, chair, furniture, smokers chair, bow chair -
Flagstaff Hill Maritime Museum and Village
Furniture - Chair, Late 19th to early 20th century
Originally the Bow Chair started off life with the name of the ‘Smoker’s Bow Chair’ where originally, it wasn’t designed for grandeur like many chairs of the time, but instead was designed for practicality and comfort. The original Smoker’s Bow Chair was a simple chunkier version of the Windsor Chair design which first appeared in the 1820’s. Although it lacked the high back found on any Windsor Chair of the time, it maintained a heavier, sturdier appearance. The main feature was a hoop or bow which was fashioned from steamed wood. This was then curved to make both the back support and arms. The chair also consisted of a wide seat, supported by 4 splayed, spindle legs. In its original form it was found in many country kitchens of the day as well as in many inns and public houses throughout the United Kingdom. Its name of the "Smoker’s Bow Chair" because the sweeping armrests were the perfect height to support a smokers arm when smoking a pipe.A significant piece of furniture from the late 19th century designed for a specific purpose, smoking. These chairs are now highly collectable and valuable today and avidly sought by collectors of antique furniture.Chair wooden dark brown "Smoker's Bow" chair, with wide and deep seat with broad arms, turned spindles and thick turned legs joined by a double stretcher.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, chair, furniture, smokers chair, bow chair -
Flagstaff Hill Maritime Museum and Village
Furniture - Chair, Late 19th to early 20th century
Originally the Bow Chair started off life with the name of the ‘Smoker’s Bow Chair’ where originally, it wasn’t designed for grandeur like many chairs of the time, but instead was designed for practicality and comfort. The original Smoker’s Bow Chair was a simple chunkier version of the Windsor Chair design which first appeared in the 1820’s. Although it lacked the high back found on any Windsor Chair of the time, it maintained a heavier, sturdier appearance. The main feature was a hoop or bow which was fashioned from steamed wood. This was then curved to make both the back support and arms. The chair also consisted of a wide seat, supported by 4 splayed, spindle legs. In its original form it was found in many country kitchens of the day as well as in many inns and public houses throughout the United Kingdom. Its name of the "Smoker’s Bow Chair" because the sweeping armrests were the perfect height to support a smokers arm when smoking a pipe.A significant piece of furniture from the late 19th century designed for a specific purpose, smoking. These chairs are now highly collectable and valuable today and avidly sought by collectors of antique furniture.Chair wooden dark brown "Smoker's Bow" chair, with wide and deep seat with broad arms, turned spindles and thick turned legs joined by a double stretcher.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, chair, furniture, smokers chair, bow chair -
Bendigo Military Museum
Uniform - PUGAREE, SLOUCH HAT, c. 1942
Item issued to John Raymond Bruns VX88627, refer Cat No 5592 for his service history.Pugaree cloth greenish colour for a slouch hat, has 38th BN WW2 colour patch sewn on the band, the band iteself is joined by a brass clip on the inside.uniform, puaree, 2nd 38th -
Parks Victoria - Gabo Island Lightstation
Bosuns chair and pulleys
Bosuns chair and harness with pulley. This device suspended a person from a rope and seat to perform work duties in safety. It includes a chair made from a flat piece of wood threaded through with a cable attached to pulleys, which move people or goods up or down heights such as the lighthouse, where it was used for painting the lighthouse and other tasks. It has first level contributory significance for its relative completeness, historic value and provenance to the lightstation.Chair (wooden piece of wood with cable threaded through 4 holes) with cables joining together above seat. Two metal pulleys with wire cable attached. -
Mont De Lancey
Functional object - Dressmaking Shears, 1900's
These vintage steel sewing shears were used at 'Belle's Bonnets' Milliners in Flinders lane Melbourne in the 1950's. Mrs Belle Phillpi was the Proprietor. Mrs Jill Sebire's wedding head piece was made at Belle's Bonnets.A pair of heavy vintage large hand forged steel dressmaking, tailors shears. They are joined with a pivot point screw. One finger hole is larger than the other.steel, scissors, cutting tools, dressmaking equipment, dressmaking shears, dressmaking scissors -
Glenelg Shire Council Cultural Collection
Costume - Sash - Ancient Order of Foresters, n.d
Small black sash, tapered to point at lower edge, joined, black cord, tassle, coat of arms, Ancient Order of Foresters, printed/ embroidered, multi-coloured -
Glenelg Shire Council Cultural Collection
Costume - Sash - Ancient Order of Foresters, n.d
Small black sash, tapered to point at lower edge, joined, black cord, tassle, coat of arms, Ancient Order of Foresters, printed/ embroidered, multi-coloured -
Glenelg Shire Council Cultural Collection
Costume - Sash - Ancient Order of Foresters, n.d
Small black sash, tapered to point at lower edge, joined, black cord, tassle, coat of arms, Ancient Order of Foresters, printed/ embroidered, multi-coloured -
Glenelg Shire Council Cultural Collection
Costume - Sash - Ancient Order of Foresters, n.d
Small black sash, tapered to point at lower edge, joined, black cord tassel. coar of Arms, Ancient Order of Foresters, printed / embroidered, multi-coloured -
Glenelg Shire Council Cultural Collection
Costume - Sash - Ancient Order of Foresters, n.d
Small black sash, tapered to point at lower edge, joined, black cord, tassle, coat of arms, Ancient Order of Foresters, printed/ embroidered, multi-coloured