Copper intrauterine devices (IUDs), first marketed in the early 1970s, represent an important contraceptive option for 150 million women worldwide. The method is safe, rapidly reversible, inexpensive, highly effective, long-acting (up to 20 years for some products [1]), and non-hormonal; these attributes make it unique and desirable for many users. However, increased bleeding and pain cause up to 15% of users to have the device removed within the first year [2]; still higher percentages tolerate some level of these side effects yet retain use of the method. In one study, 67% of women using the TCu380A complained about menstrual side effects within the first year of use [3]. (Hubacher et al, 'Side effects from the copper IUD: do they decrease over time?', 2009)This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Two sealed Gravigard IUDs. IUD and inserter are sealed inside a sterile plastic pocket. Manufacturer information is printed on a cardboard insert which holds each IUD inside the pocket.intrauterine device

Developed by Dr Jack Lippes in 1962, the Lippes Loop was commonly used as a contraceptive device from the 1960s to the 1980s. Due to its low cost and the ease of inserting and removing the device, it quickly became the most popular IUD in the world during its time. This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Two sealed Lippes Loop IUDs, Size C. IUD and inserter are sealed inside a sterile plastic pocket. Manufacturer information is printed on a cardboard insert which holds each IUD inside the pocket. The packaging of the first Lippes Loop is printed with an expiry date of Jan 83 on the back. The packaging of the second Lippes Loop is printed with instructions for use on the back.l intrauterine device

Developed by Dr Jack Lippes in 1962, the Lippes Loop was commonly used as a contraceptive device from the 1960s to the 1980s. Due to its low cost and the ease of inserting and removing the device, it quickly became the most popular IUD in the world during its time. This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Lippes Loop IUD, Size B. IUD and inserter are sealed inside a sterile plastic pocket. Manufacturer information is printed on a cardboard insert which holds the IUD inside the pocket. The packaging of the IUD is printed with instructions for use on the back.intrauterine device

The Amnihook is an amniotic membrane perforator. It provides a doctor with the ability to artificially rupture the amniotic membrane safely and comfortably without injury to mother or foetus.This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Amnihook perforator in sealed plastic package. The back of the package are printed with instructions for use.intrauterine device

Used for endometrial biopsy. As described on packaging - 'For histologic biopsy on the uterine mucosal lining or sample extracting of uterine menstrual content.'This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Four curettes, each in an individually sealed package. Each package is labelled 'Unimar/Pipelle TM Endometrial/suction curette.' Distributed by Unimar (USA), manufactured by Prodimed (France). Batch dated 'OCT 89'.intrauterine device

This item was distributed by Sklar Manufacturing, based in Long Island, New York.This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Metal cylindrical jube with cap, containing silver nitrate. Title of label on the front of the jar reads 'Ralks/SILVER NITRATE/APPLICATORS/(75% SILVER NITRATE)'. Label also carries a poison warning about the nitrate and what to do should in case of accidental exposure. Printed with an expiry date of May 1986.

This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Set of small surgical forceps. Forceps resemble tweezers, with pointed ends. There is a corrugated section of metal at the centre of the forceps for grip. One arm of forceps has a small pin, which fits into a hole on the other arm of the forceps. Engraved text on inner aspect of forceps reads 'STAINLESS STEEL'.

This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Ten small glass specimen bottles enclosed in a cardboard box. Box is green and white in colour and the front of the box is printed with the text 'GIBCO DIAGNOSTICS'. Reverse of box is printed with the details of the manufacturer. One end of box is labelled 'Batch No./14' and has a sticker attached labelled 'STUART'S TRANSPORT MEDIUM', with space on the label to enter a patient's name, the specimen and the date. Instruction printed on box below sticker reads 'Store in cool dark place'. The specimen jars are identical, each being made of glass with a metal screw top lids. Each jar has a 'STUART'S TRANSPORT MEDIUM' label attached, identical to the one attached to the end of the box. The inside of nine of the bottles is discoloured with some form of residue, possibly as a result of the evaporation of a substance inside. One bottle is full, containing an undetermined liquid.

This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Set of stainless steel tenaculum forceps. The instrument resembles a set of scissors in style, with rings at one end for finger grip. Body of the instrument curves to one side, and each arm of the forceps ends in a curved point. The points at the end of each arm touch at the centre. Body of forceps is engraved with the word 'STAINLESS'. The initials 'L.H.W.' have been scratched into one arm of the forceps.

This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Stainless steel sponge forceps. Design of instrument resembles a pair of scissors. There are circular finger grips at one end, with a metal ratchet between them for locking the forceps in place. Each arm of the forceps ends in a serrated, round point. Text engraved near pin of forceps reads 'L.R.I./STAINLESS'.'L.R.I./STAINLESS'.gynaecology

Copy of a map from 'A Short History of Australia' by Ernest Scott.map, explorers, exploration, bass straight, hobart, port davey, georgetown, beaconsfield, queenstown, gordon rover, derwent river, launceston, port dalrymple, banks straight, macquarie harbour, maps, plans

Copy of a map from 'A Short History of Australia' by Ernest Scott published in 1918. map, australia, indian ocean, van dieman's land, tasmania, new south wales, sydney, western australia, perth, albany, launceston, hobart, south australia, melbourne, townsville, rockhampton, brisbane, northern territory, queensland

souvenirs, ballarat rsl, ballarat

The Australian pilot vessel and steam yacht Alvina had a long and varied career. It was built in the UK as a private yacht, 1891 and in 1903 came to Australia to commence in the pilot service at Port Phillip Heads. This model of the pilot ship is held by the nearby Queenscliff Maritime Museum in Victoria. In 1923 the larger Akuna took over from the Alvina, which then served as an excursion steamer and ferry in Westernport Bay for another 10 years when in 1933 it was replaced by an ex-Sydney vehicular ferry displaced by the new Harbour Bridge. Alvina was not scrapped until 1961. DSC_0046In 1901 the pilots took delivery of their first steam-powered pilot cutter, “Victoria”, 46 metres in length, built at Williamstown. “Victoria” was followed by “Alvina”, “Akuna”, “Akuna II” and in 1953, “Wyuna”, a twin-screw diesel electric pilot cutter 63 metres in length. “Wyuna” served until November 1979 and was then sold to the new Australian Maritime College at Launceston, Tasmania for use as a training ship.Model of the Pilot vessel 'Alvina in glass casepilot service, pilot vessel 'alvina', mr a g woodley

First ocean going vessel in world built of mild steel. Was known as the "Greyhound of the Pacific". Laid up December 1920 and hull sunk in Bass Strait in 1928.RealismMounted sepia photograph of a painting by A V Gregory of the steam ship S S RotomahanaS S Rotomahana and A V Gregorysepia photograph, a v gregory, ss rotomahana, steam ship

This King George III 1797 penny, colloquially described as a ‘Cartwheel’ because of its large size and thick rim, was manufactured in Great Britain from 1797-99. The penny and the twopence were the first coins shipped to New South Wales by the British Government. In 1800, Governor King issued a proclamation that forbade their export. This coin is one of the 132,000 coins sent to Australia in 1800. It is not uncommon to find cartwheel pennies used as containers. They were reputedly used to conceal a more valuable coin or for smuggling. The penny was purchased by the Society as part of a small collection of Henty memorabilia and portraits from the owner of Moorabool Antiques, Geelong in 2021, which had in turn acquired the item from the estate of Dennis Alston of Alston's Antiques in Hamilton, Victoria.This cartwheel penny, used to contain a lock of hair of Thomas Henty (1775-1838), is of statewide significance to Tasmania, where he settled and died, and to Victoria, where his children and their descendants were notable pioneers, squatters and subsequently landowners in the Western District. The item is also of national significance for its strong connection to the Henty family, notable British settlers of southeastern and southwestern Australia in the 1830s. The connection to Kew (Vic.) is that members of the Henty family owned important mansions in Kew in the 19th century. Thomas Henty was the father of Stephen George Henty of 'Findon', and Francis Henty of 'Merino Downs' in the Western District and 'Field Place', Kew. Numerous members of the Henty family are buried in the Boroondara General Cemetery.Object of personal memorabilia. Coiled and bound lock of hair of Thomas Henty contained in a hollowed-out copper 'cartwheel' penny.OBVERSE: Georgius III . D : G . REX / REVERSE: Britannia 1797 / SELLER'S LABEL: Lock of hair from the late Thomas Henty, born 1775thomas henty, henty family, launceston, west tarring -- sussex (uk), tasmanian pioneers, australia - early settlers, cartwheel pennies

This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Set of six pathology packs. Packs include a cytobrush, spatula, and a slide, inside sealed plastic packaging. The sets are addressed to be sent to Dr Neil Tresize Pathology for examination. obstetrics

Multiload is an IUD, an intrauterine device used for contraception. The plastic used in this IUD is a mixture of high density polyethylene, ethylene vinyl acetate copolymer and barium sulphate in a weight ratio 44/36/20. (MIMS, October 2013)This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Two flat boxes containing Multiload CU250 intrauterine devices. Front of box carries an image of a hand holding an IUD inserter, with the Multiload IUD at the top of the inserter, above a blue background on which an image of a uterus has been superimposed. Text printed on the front of the box reads 'MULTILOAD/CU250/intra-uterine/device/Attention:/the enclosed instructions should be followed carefully before insertion of the MULTILOAD-cu250'. Manufacturer's information is printed on the bottom section of the front of the box. Back of box is printed with distributor information. One box is sealed, and the other box has been opened. Back of sealed box carries a sticker which reads 'Date of manufacture: /12-08-1984'. Opened box contains a Multiload IUD in a sealed packet, a brochure outlining the recommended procedure for insertion, a booklet outlining prescribing information, and another booklet entitled 'Everything you have to know about Multiload'. The packaging of the IUD inside the opened box is labelled with an expiry date of 16/10/1984.intrauterine device

This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Selection of five steel surgical needles. Four of the needles are 3" needles, and the fifth is a 3.5" needle. Each needle consists of a thin, hollow tube that is pointed at one end, attached to a circular fitting by which the needle can be attached to a syringe/vial. Between the circular fitting and the body of the needle is a section of metal with curved sides and squared edges to allow for grip. The grip section of the largest needle is engraved with the text '14G'.14Gsurgery

xii, 320 p.; 21 cmnon-fictionThis book is about Frank's progress through medical school in Melbourne and Tasmania where he trained as a resident at the LGH and then became a general practitioner in Launceston's northern suburbs. frank madill, biography

Used for endometrial biopsy. This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Stainless steel curette. Thin metal instrument, consisting of a thicker handle section with a groove for finger grip attached to a slender metal shaft. The shaft ends in a hollowed, squared point. Writing engraved on handle of device reads 'martin GERMANY STAINLESS'. In white paper sterilisation bag bearing the handwritten text 'DR H/W' and KEVURKIAN (sic)/CURETTE''martin GERMANY STAINLESS'gynaecology

This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Stainless steel punch forceps. There are two circular finger grips at one end, resembling a pair of scissors, attached to short arms that meet at a point. A long narrow shaft extends perpendicularly from this point, ending in a small, hinged, toothed grip. Writing engraved on one arm of forceps reads 'Stainless Germany'. Writing engraved on opposite side of forceps reads 'malyoung'.'Stainless Germany'; 'malyoung'gynaecology

This uterine sound is possibly made of aluminium, but this has not been confirmed.This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Metal uterine sound. Instrument is a thin, tube-like piece of metal, which tapers and curves up into a blunt point at either end. The ends curve in opposite directions, forming a shape that resembles a tilde( ~).gynaecology

36 page magazine investors, g.w. barton, bank of australasia, royal bank of australia, castlemaine brewery, castle salt, city of newcastle gas and coke co, denton hat mills ltf, national bank of new zealand, potter's sulphide ore treatment ltd, royal exchange of sydney, north shore gas company, perpetual trustee co. ltd, launceston cas co, footscray gas and coke co. ltd, kauri timber co. new zealand

The ship’s telegraph section was once part of the navigational equipment of the famous paddle steamer, PS Hygeia, and was later installed on Flagstaff Hill’s exhibit, the steamer Rowitta. This is the Bridge Section of a ship’s telegraph, a Duplex Gong model, made by Chadburn & Son of Liverpool. The gong sounded two signals whenever the navigational commands to change the speed or direction were given by the ship’s pilot. Communication between the ship’s pilot and the engine room in the late 19th to the mid-20th centuries was made with a system called an Engine Order Telegraph (E.O.T.) or ship’s telegraph. The equipment has two parts, the Bridge Section and the Engine Room Section. The Bridge Section was usually mounted onto a pedestal, and the Engine Room Section was attached to a vertical surface. The standard marine commands were printed or stamped around the face of the dial and indicated by a pointer or arrow that was usually moved by a rotating brass section or handle. The ship’s pilot stationed on the Bridge of a vessel sends his Orders for speed and direction to the Engine Room with the E.O.T. He moves the lever or levers, depending on the number of engines the ship has, to change the indicator on the Bridge Section’s dial to point in the new direction and speed of travel. This change causes the Orders to be duplicated on the Engine Room Section’s dial and a bell or bells to signal the change at the same time. The engineer then adjusts the ship’s engines and steering equipment to follow the pilot’s Order. CHADBURN & SON, Liverpool- Chadburn Brothers, William and C.H., were joint inventors and well-established makers of optical and scientific instruments and marine gauges. The firm was granted the Prince Albert Royal Warrant in the late 19th century. In 1870, William Chadburn applied for a patent for his navigational communication device for use on ships. By 1875, Chadburn & Son was producing the brass Engine Order Telegraph in its plant at 71 Lord Street, Liverpool. In 1911, the ship, RMS Titanic, was launched, fitted with Chadburn & Sons E.O.T. The Chadburn Ship Telegraph Company Limited was registered in 1898 to take over Chadburn & Sons. In 1903, a large factory at Bootle, near Liverpool, and its products were being sold overseas. In 1920, electric-powered telegraphs were developed. In 1944, the name changed to Chadburn’s (Liverpool) Limited. In 1968, the company became Chadburn Bloctube Ltd. In 2000, the company, now Bloctube Marine Limited, was still manufacturing ship telegraphs. The P.S. HYGEIA 1890-1932: - This ship’s telegraph was installed on the new paddle steamer, PS Hygeia, one of three iconic pleasure steamers famous for providing regular services in Port Phillip Bay, Victoria, to thousands of passengers between the ports of Queenscliff, Sorrento, Portsea, Dromana, Rosebud, Rye, and Mornington. It joined the Ozone and the Weeroona, all three described as being glamorous, powerful and fast. Its ticket office was on the pier itself. The P.S. Hygeia was built in Yorker, Scotland, in 1890, by Napier, Sharks & Bell. It was registered in Melbourne, Australia, by Hubbart, Parker & Co. in 1891. The steel ship was 92 metres long, able to travel at 22 knots, and licensed to carry over 1600 passengers in luxury, with even a barber shop on board. The regular service between the ports in Port Phillip Bay, Victoria, continued for over 40 years. With the decline in passenger demand, the service wound down. The Hygeia was sold to H.M. Morris in 1931 for demolition and breaking up. Equipment, fittings, and even lifebuoys were sold, with many items purchased by people who had some connection to the Hygeia. On August 25th, 1931, what was left of the vessel departed Port Melbourne and eventually, in June 1932, it was laid to rest at the ships’ graveyard outside Port Phillip Heads. The SS ROWITTA 1909-2015: - The ship’s telegraph was originally installed on the PS Hygeia. It was purchased when the Hygeia was broken up in 1931 and later installed, in 1975, on Flagstaff Hill’s SS Rowitta, an exhibit greatly enjoyed by the public until it was demolished in 2015. The ferry “SS Rowitta” was built in 1909 in Hobart, Tasmania. The timber steam ferry was built using planks of Huon and Karri wood. It was a favourite with sightseeing passengers steaming along Tasmania’s Tamar and Derwent rivers for 30 years. Rowitta was also known as Tarkarri and Sorrento and had worked as a coastal trading vessel between Devonport and Melbourne, and Melbourne, Queenscliff and Sorrento. The vessel had given over 100 years of service and pleasure. This Bridge section of a ship’s Engine Order Telegraph, used with an Engine Room section, represents late-19th-century change and progress in communication and navigation at sea. This type of equipment was still in use in the mid-20th century. It is significant for its association with its maker, Chadburn & Son, of Liverpool, a well-known marine instrument maker whose work was recognised by English Royalty, and whose products were selected to supply similar equipment for use on the RMS Titanic. The ship’s telegraph is also significant for its association with the paddle steamer PS Hygeia, one of three iconic steamers that transported thousands of passengers from port to port within Port Phillip Bay, Victoria, for over 40 years from the 1890s to the 1930s. Queenscliff Borough remembers the Hygeia by naming a road near the pier Hygeia Drive. The Hygeia is registered on the Victorian Heritage Database as a vessel of significance, VHR S329. In 1901, Hygeia had the privilege of carrying their Royal Highnesses, the Duke and Duchess of York, from Mornington to St Kilda Pier, Melbourne, during their Royal visit celebrating the Federation of Australia. The ship’s telegraph is also important for its connection with the Rowitta, a large exhibit on display at Flagstaff Hill Maritime Village, aiding maritime education for over 40 years. It represented the importance of coastal traders to transport, trade and communication along the coast of Victoria, and before the availability of rail and motor vehicles, serving many roles. Bridge section of a Ship’s Telegraph or Engine Order Telegraph (E.O.T.). The round, double-sided, painted glass dial is inside a brass case behind glass. It is fitted onto an outward tapering brass pedestal with a round base. The brass indicator arrows between the handles point simultaneously to both sides of the dial when moved. An oval brass maker’s plate is attached to the top of the case. The dial’s faces have inscriptions that indicate speed and direction, and the front face and plate include the maker’s details. A serial number is stamped on the collar where the dial is fitted to the pedestal. The ship’s telegraph is a Duplex Gong model, made by Chadburn & Son of Liverpool. It was originally part of the navigational fittings on the paddle steamer, PS Hygeia.Dial, maker’s details: “PATENT “DUPLEX GONG” TELEGRAPH / CHADBURN & SON / TELEGRAPH WORKS / PATENTEES & MANUFACTURERS / 11 WATERLOO ROAD / LIVERPOOL” LONDON / 105 FENCHURCH STREET” “NEWCASTLE / 85 QUAY + SIDE” “GLASGOW / 69 ANDERSON QUAY” “PATENT” Dial instructions: “FULL / HALF/ SLOW / FINISHED WITH ENGINES / STOP STAND BY / SLOW / HALF / FULL / ASTERN / AHEAD” Maker’s plate: “CHADBURN / & SON / PATENT / LIVERPOOL” Serial number: “22073”flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, engine order telegraph, e.o.t., navigational instrument, communication device, ship’s telegraph, engine room section, bridge section, rms titanic, chadburn & son, chadburn brothers, william chadburn, chadburn ship telegraph company, chadburns, duplex gong, liverpool, ss rowitta, navigation, marine technology, pilot’s orders, steam power, hobart, tasmania, devonport, tasmanian-built, ferry, steam ferry, steamer, 1909, early 20th century vessel, passenger vessel, tamar trading company, launceston, george town, sorrento, tarkarri, speculant, peter mcgennan, p j mcgennan & co. port phillip ferries pty ltd, melbourne, coastal trader, timber steamer, huon, karri, freighter, supply ship, charter ferry, floating restaurant, prawn boat, lakes entrance, ps hygeia, paddle steamer, pleasure steamer, port phillip bay, queenscliff, portsea, dromana, rosebud, rye, mornington, hubbart parker & co, 1890, 1903, h.m. morris, hygeia

Used to measure the depth/distance of the uterus. Uterine sounds are particularly useful for ensuring safe and accurate IUD placement.This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Disposable uterine sound in sterile sealed packaging. Label inside packaging reads 'Mark-7 brand of disposable uterine sound/ONE STERILE UNIT/NO. 154'. Label also includes manufacturer information, a sterile packaging warning, and a caution about sale of the item being restricted to physicians. The number '026' is printed on the back of the packaging.intrauterine device

This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Two sealed packs of Gammex surgical gloves, size 8. Labelling on packaging indicates that the gloves were made by Ansell Medical, in Malaysia, and printing on the packaging indicates that the expiry date for both pairs of gloves is January 1996.obstetrics, surgery