Black and white photograph of Prahran and Malvern Tramways Trust bogie car No. 33, maximum traction tramcar, later to become M&MTB No. 33. Photographed in Coldblo Road alongside Malvern depot. Tram has destination of St. Kilda Road, route number indication "2". Photographed probably between 1913 and 1919 when P&MTT taken over by the M&MTB, though could be later prior to repainting. On rear is stamp in purple ink "Photographed by C.F. Dewey Sydney N.S.W." / "Copyright by the International Association of Railway Correspondents". Scan updated 18/8/13 and back image added.trams, tramways, malvern depot, pmtt, c class, tram 33

Article from page 1 and 2 of The Courier, Monday 22/1/1996 written by Andrew McBride that a meeting is to be held the following day at the Ballarat Town Hall to form a group to push for the return of trams to Ballarat. Quotes Peter Hiscock, Sovereign Hill Executive Director and Andrew McEvoy, Ballarat Tourism Board, Executive Officer. Also has item about the $2m upgrade of Ballarat Railway Station. Includes a photo of Peter Hiscock looking along Sturt St. from Grenville St. Photo by Alan Marini."Franklins Fresh 329" stamp in top right hand corner in black ink.trams, tramways, public meeting, ballarat railway station, ballarat city tramway, ballarat revival

Book, titled, "Installation of Rail Bonds by Electric and Copper Welding". Consisting of a 36 page book, printed with many photographs, two tones (black and grey) printed in grey and black ink illustrating the equipment that was made by The Electric Railway Improvement Co. of Cleveland Ohio, USA. Covers in addition to the 36 pages, are on the outside, marbled paper, bluish grey, with embossed dark blue titles and company logo (ERICO), with light blue bands and a photograph of a rail based welding machine on the front cover. Stapled with three staples. On page 2, has been over stamped in purple ink, the name and address of the Australasian representative, "Charles Wright". Date of printing not given in document, estimated to be c1920. See also item Reg. No. 1639, for notes on bonding costs and return circuits.trams, tramways, trackwork, rail bonding, erico, welding

Set of nine Engineering standards that were acquired by ESCo during the 1920's. 2261.1 - British Engineering Standards Assoc. No. 101 - 1921, titled "British Standard Specification for Tramway Tyres" dated July 1921. 12pp + printed cover and a folded tip in sheet printed as plate 1, date stamped ESCo 14 Sep. 1923 - 216H x 141W, with "Tait Book Co. 90 William St. Melbourne" stamp on front cover. Light blue grey cover, with off white paper inside. Saddle stapled, rounded corners. Printed by Waterlow & Sons Limited, 49 Parliament Street Westminster SW1. See image 2261i1 for front cover. Publisher - Crosby Lockwood and Son London UK. - see images btm2261i1 and i2 for scans of the document. 2261.2 - British Engineering Standards Assoc. No. 2 - 1922, titled "British Standard Specification and Sections for Tramway Rails and Fishplates" dated March 1922. 56pp including cover, actual pages 35 - 50 are fold out sheets for plates 1 to 8 with rail sections detailed, date stamped ESCo 8 Jun 1926 - 216H x 142W, with "Tait Book Co. 90 William St. Melbourne" stamp on front cover. Light blue grey cover, with off white paper inside. Saddle stapled, rounded corners. Printed by Waterlow & Sons Limited, 49 Parliament Street Westminster SW1. Publisher - Crosby Lockwood and Son London UK. See image btm2261i3.pdf and i4.pdf 2261.3 -Australian Commonwealth Engineering Standards Association, Standard No. E 1a - 1926T - "Tentative Australian Standard Specifications for Railway Permanent Way Material", dated May 1926. 32pp plus cover, date stamped by ESCo 14 June 1926 - 229H x 157W saddle stapled. Grey cover with off white paper inside. Printed by The Australasian Medical Publishing Company Limited. See image 2261i2 for front cover. Publisher - The Association Sydney, Australia. See images i6 and i7 for a pdf scan of this document. 2261.4 - British Engineering Standards Assoc. No. 2 - 1927, proof issue, titled "British Standard Specification and sections for Tramway Rails and Fishplates" dated 1927. 56pp including cover, actual pages 35 - 50 are fold out sheets for plates 1 to 8, date stamped ESCo 16 Jul 1927 - 216H x 142W. Off white paper covers and text. Saddle stapled, rounded corners. Has "Waterlow" name on front cover bottom right hand corner. 2261.5 - Australian Commonwealth Engineering Standards Association, Standard No. C. 30 -1926T - "Tentative Australian Standard Specification for Drum Controllers and Resistances for use therewith for electric motors (DC and AC slip ring, excluding controllers for traction purposes", dated December 1926. 28pp plus cover, date stamped by ESCo 29 Jun 1927 - 227H x 152W. Grey cover with off white paper inside, saddle stapled. Printed by The Australasian Medical Publishing Company Limited. Publisher - The Association Sydney, Australia. 2261.6 - Australian Commonwealth Engineering Standards Association, Standard No. C 33 - 1926T - "Tentative Australian Standard Specifications for Drum Starters for electric motors", dated December 1926. 28pp plus cover, date stamped by ESCo 29 June 1927 - 227H x 153W. Grey cover with off white paper inside, saddle stapled. Printed by The Australasian Medical Publishing Company Limited. Publisher - The Association Sydney, Australia. 2261.7 - Australian Commonwealth Engineering Standards Association, Standard No. E 13 to 15 1927 T - "Tentative Australian Standard Specifications for Railway Rolling Stock Material, locomotive tyres, carriage wagon and tender tyres, weldless steel angle rings", dated August 1927. 32pp plus cover, date stamped by ESCo 15 Sep 1927 - 228H x 153W. Grey cover with off white paper inside, saddle stapled. Printed by The Australasian Medical Publishing Company Limited. Publisher - The Association Sydney, Australia. 2261.8 - Australian Commonwealth Engineering Standards Association, Standard No. E 22 to 29 1928 - "Australian Standard Specifications for Railway Permanent Way Material", dated January 1928. 64pp plus cover, date stamped by ESCo, but not readable - 228H x 153W. Light purple cover with off white paper inside, saddle stapled. Printed by The Australasian Medical Publishing Company Limited. Publisher - The Association Sydney, Australia. 2261.9 - British Engineering Standards Assoc. No. 101 - 1929, titled "British Standard Specification for Tramway Tyres" dated February 1929. 16pp +cover, pages 13 and 14 are foldout plate 1, held together with sewn thread, - 218H x 142W, with "J. Ewins & Sons, Booksellers and Stationers Ballarat" label on front cover. Light blue grey cover, with off white paper inside. Printed by Waterlow & Sons Limited, 49 Parliament Street Westminster SW1. Publisher - Crosby Lockwood and Son London UK. Yields information about British Tramway Standards which were used on Australian and New Zealand Tramways.Set of nine printed books, centre stapled. trams, tramways, standards, tramway equipment, tyres, permanent way, track materials, electric motors, esco

One Hundred page book with nine fold out plates tipped in, green card titled "The Westinghouse Brake - Reference Book", published by Westinghouse Brake Co. in 1904. Text has been sewn into sections and then bound into the book. Plate inside front cover, has been printed in colour showing the extent of the use of the Westinghouse brake system that had been adopted on the various railways. Plat 110E (page 43) has an orange plastic component acting as a brake handle and showing how the various ports and parts interrelated in the valve. Inside the back cover are two loose folded sheets, plate 209 and 209A, Improved triple valve and the "Graduating Release Valve", dated August 1905. Covers compressed air brake systems on railway trains, showing how they are designed, operated, parts listing and has a number of pasted in erratum in the book. "Colin Rutledge" stamped on top of page 1 and inside front cover. On cover written in black ink "Melbourne Office, WB Co. of A, Jan '11"trams, tramways, westinghouse, railway brakes, equipment, compressors, carriages

Technical pamphlet, titled ""Knorr Quick Action Automatic Air Brake" consisting of printed cover (folded sheet, printing only on front cover and two inset folded sheets plate III and plate IV with technical notes and diagrams of the brakes on locomotives and carriages. Details the action of the brakes, operation and equipment. Published by the Knorr Brake Co. of London, Steam Railway Dept. Sheets have been punch with two holes along the left hand edge - probably at a later date. Scanned to the COTMA Website 4-10-2015."Colin Rutledge" stamped on top of page 1.trams, tramways, knorr brakes, train brake systems

2287.1 - Four page technical pamphlet, titled "Combined Guard's Van Valve and Gauge for Vacuum Brakes", published by Westinghouse Brake and Saxby Signal Co. Ltd. November 1926. Manual No. D.P. 8. 2287.2 - Eight page technical pamphlet, titled "Brake Control Valve for Automatic Vacuum Brake", published by Westinghouse Brake and Saxby Signal Co. Ltd. January 1928, Manual No. D.P. 15. Saddle Stapled. 2287.3 - Twelve page technical pamphlet, titled "Vacuum Brake Apparatus", published by Westinghouse Brake and Saxby Signal Co. May 1924, Manual No. D.P. 3. Saddle Stapled. 2287.4 - Eight page technical pamphlet, titled "Prestal Vacuum Brake Cylinders Combined and Separate Types", published by Westinghouse Brake and Saxby Signal Co. Ltd. January 1928, Manual No. D.P. 14. Saddle Stapled. Two copies held.Each have "Colin Rutledge" stamped on top of page 1.trams, tramways, westinghouse, railway brakes, vacuum brakes, equipment

Australian Tramway Employees Association (Tramways Union) badge. Badge made on a steel/ silver backing with words "Australian Tramway Employees Association" on outer edge of badge with a royal blue enamel background. In centre of badge has the Australian coat of arms with a railway type spoke wheel above the logo and underneath the coat of arms the words "Federated Australia" in a banner. Has a steel ring through a hole in the top of the badge. On back of badge has stamped into the badge "V1 / 5947", possibly indicating state of Victoria and badge number. On the base of the badge has words "Wittenbach & Co. / STSIL" cast into the badge. See image files for front and back of badge. Not known when made or used.tramways, trams, unions, badges, atea, employees

Black & white photo of M&MTB tram No. 888 from rear cab of 877 while on AETA tour of 25/6/1955 in Victoria Street, North Richmond, just to the west of the North Richmond Station, Victoria Street railway bridge. Numerous parked cars of the era in the street, and shops on both sides of street. Tram 888 has destination of "SPECIAL", carrying AETA auxiliary board and a board on front dash of tram that says "ELECTRIC TRANSPORT A NECESSITY , PROTECTS YOUR INVESTMEST, BUILDS YOUR CITY, CREATES BUSINESS"On typed paper on rear, "Shot out of the Rear cabin of 877 showing 888 tailing us on AETA Bourke St. tour. June 25 1955" and "Geoff Grant" stamp in btm rh cnr.trams, tramways, victoria st, bourke st, aeta, north richmond , tram 888

Colour photocard with serrated edging of SEC tram No. 14 in Victoria St. passing St Alipius church. SPER Postcard No. 2, has details of tram on rear, as well as printer (Nucolorvue Productions Pty Ltd. Has been stamped in blue ink on rear "BALLARAT TRAMWAYS / OFFICIAL RE-OPENING / 1st FEBRUARY, 1975". Tram has a very glossy paint, and new blinds, photographed soon after repainting? trams, tramways, ballarat, postcards, sper, victoria st., tram 11

Yields information about decorated trams, Bridge St traders Christmas tram and the area near the Ballarat level crossing.Black and white photograph of SEC Ballarat No. 17 about to cross the railway lines in Lydiard St. North. Has destination of "SEBASTOPOL". Tram decorated for Bridge St. Traders and has been painted white, except for warning stripes on front of tramcar. Sign on front says "BRIDGE ST TRADERS/SEASON GREETINGS". Photo taken 23/12/1967. 583.1 - as above but a wider view to the right, showing Kennedy Murray Pty Ltd, General Carriers buildings in the railway yard and part of the railway goods shed. .2 - as for .2.2 - has stamp on back "Ronald and Jennifer Burzacott, 22 Howard St, Sebastopol Vic 3356"trams, tramways, ballarat, bridge st. traders, lydiard st. north, christmas trams, railway , tram 17

Colour photograph of Ballarat No.37 northbound in Lydiard St. North in Seymour St. loop, waiting to cross a southbound tram. Photo taken from southbound tramcar. No. 37 has destination Lydiard St. Nth. In the background is the Railway station precinct and houses on the west side of Lydiard St. North. Photo on Agfa Paper and taken on Friday 14 August 1971.Stamps with faded green ink: "Photo by Chris Jeffrey / Number" with number "104PC/08" in blue ink and date stamp "Friday 14 August 1971" also in faded green ink.lydiard st nth., seymour st loop, tram 37

Three issues of "Tram Tracks - The Electric Traction Monthly" of the Australian Electric Traction Association. Each issue has a standard cover, of the magazine name etc, with a small advertisement for the Model Dockyard but are in different colours, all have been saddled stapled with two staples. The Volume and date details have been over stamped using a hand stamp. Back covers, inside back covers have the same advertisements. The three issues contain advertisements for Hartleys Sports store, Hearns Hobbies, Wattle Park, Johnson's Variety Store, Barnes Tennis Centre, The Model Dockyard, Meadmore Model Engineering and Austral Bronze Pty Ltd, Christie Scale Model Railway and Equipment, Herbert Small (Meccano) and Bassett-Lowke Models. 2464.1 - Vol. 1, No. 6 - 12 pages, Oct. 1946, with cover printed in blue. Has articles on staff and ticket working on VR tramways, Tramway rolling stock classification, rolling stock listing for SEC Bendigo, and the first 65 years of electric traction. News items on Sydney, Melbourne, Ballarat, Newcastle, Hobart and AETA. Inside front cover has a photo of Y1 611. 2464.2 - Vol. 1, No. 6 - 16 pages, Nov. 1946 with cover printed in brown. Has articles on bus profits, route symbols on Australian tramways, Hobarts double deckers, high current collection tests, rolling stock listing for SEC Geelong, VR Electric locos, and the first 65 years of electric traction continued. News items on Sydney, Melbourne, Ballarat, VR, Brisbane, Adelaide, Perth, Fremantle, Kalgoorlie, overseas and AETA. Inside front cover has photos of Sydney R and R1 class trams. 2464.3 - Vol. 1, No. 7 - 12 pages, Dec. 1946 with cover printed in green. Has articles on NSW tram and bus losses, proposed abandonment of the Sandringham - Block Rock line, Elwood Depot, rolling stock listing of NSW Service stock. Has news items on Brisbane, Sydney, Newcastle, Melbourne, Adelaide and AETA news. trams, tramways, electric traction, aeta, models, australian tramways

White cardboard mount, 35mm slide, from the Association of Railway Enthusiast's film strip titled "Provincial Tramway Film Strip" of Ballarat Trams No. 17 and 30 at the intersection of Sturt and Lydiard St. North with the Town Hall in the background. The film strip notes (Reg. Item 2560), provided the following caption details: ""CITY" in Ballarat was at the intersection of Sturt St. and Lydiard St which included the Post Office and City Hall, seen here, on diagonally opposite corners. Single Trucker No.30 will soon round the curve to Lydiard St. Nth. whilst No. 17 will proceed straight ahead to Victoria Street. -.Sept. '71 (Graham Evans)" See image btm2561p.tif for high level scan of image. Stamped on base of slide "11769" and written in ink on top edge "17 & 30 Lydiard St. Ballarat"tramways, trams, are, film strip, sturt st, town hall, tram 17, tram 30

White cardboard mount, 35mm slide, from the Association of Railway Enthusiast's film strip titled "Provincial Tramway Film Strip" of Ballarat Trams bogie No. 35 and four single truck cars in the storage loop, or City Loop at the east end of Sturt St. No. 35 has a "Bray Raceway Trotting Friday Night" on the front of the tram. The film strip notes (Reg. Item 2560), provided the following caption details: "At the east end of Sturt St., about 200 yards from "CITY" was "CITY LOOP" - a storage facility used to hold cars for peak loadings and emergency use. -Nov. '70 (Glen Mills) See image btm2562p.tif for high level scan of image. Stamped on base of slide "11770" and written in ink on top edge "Lydiard St. Ballarat"tramways, trams, are, film strip, city loop, sturt st, tram 35

White cardboard mount, 35mm slide, from the Association of Railway Enthusiast's film strip titled "Provincial Tramway Film Strip" of Ballarat Tram No. 12 approaching the intersection of Victoria and Main Streets in Bridge St. Has Bridge St. and Town Hall in the background. The film strip notes (Reg. Item 2560), provided the following caption details: "At the east end of Bridge St. narrow and congested extension of Sturt St .- was the junction of the "Mt. PLEASANT" (Midland Highway) and the "VICTORIA St" line (Western Highway. No. 12 approaches the junction, correctly set for the "Mt. PLEASANT" LINE - Sept. '71 (Graham Evans) See image btm2563p.tif for high level scan of image. Stamped on base of slide "11771" and written in ink on top edge "No. 12 Bridge St. Ballarat"tramways, trams, are, film strip, bridge st, tram 12

White cardboard mount, 35mm slide, from the Association of Railway Enthusiast's film strip titled "Provincial Tramway Film Strip" of No. 21 or could be 27 taken from the Ballarat (Ballarat East) Fire Station tower. Photo taken Nov. 1970. Has the sign of the AMPOL service station in the foreground. Has destination of Special. Tram at the intersection of Main and Barkly Streets. The film strip notes (Reg. Item 2560), provided the following caption details: "Another 1/2 mile or so saw the "Mt PLEASANT" line turn sharply from the Midland Highway and head towards its terminus in the southern suburbs. - Nov. '70 (Glen Mills)" See image btm2564p.tif for high level scan of image. Stamped on base of slide "11772" and written in ink on top edge "12 Mt Pleasant Line Ballarat"tramways, trams, are, film strip, mt pleasant, barkly st

Yields information about the way the SEC repair overhead failures on the Ballarat Tramway system - shows the trucks and the crews involved.Black and White copy photograph of a newspaper photograph taken by The Courier of repairs to damaged overhead wire, Lydiard St North, just to the north of the Railway level crossing. Tram services were disrupted as a result. Photo taken 23/4/1965, published 24/4/1965. Shows three SEC vehicles in use, including the tower truck. By the front of the truck, the overhead wire and a set of ears can be seen. The Victorian Railways Institute building is in the background. In the far background is the North Star hotel. The types of truck, from the left hand side are Ford (Tower Truck), International and a Bedford. Collected by Alan Bradley from the Ballarat Courier early 1980's. See Excel file "Record of Ballarat Courier Photos SEC era" (Archive Documents) for source of details.On rear stamped "Copyright, The Ballarat Courier Proprietary Limited." and "85%" in ink in the top left hand corner.tramways, trams, lydiard st nth, overhead, secv, repairs

Printed colour postcard of photograph of Sturt St. in the mid 1940's looking from the top of a building in Grenville St. towards the West. Has a number of parked vehicles in kerbs, two people riding horses, a Vacuum Oil Co. truck in the bottom right hand corner and an SEC tram travelling west, just past the City Loop points. See Reg Item 675 for the same photograph - slightly cropped. Victorian Railways photograph. On rear the card has been ruled for address, stamp and titled postcard. Along the bottom edge is the publication details "ANSCOL - Australian Natural Scenic Colour - Thomas Tennant, 14 Jaques St., Chatswood N.S.W." trams, tramways, sturt st, postcards, sec, grenville st, tram 4

Has a strong association with John Prisk, ESCo tram driver of the 1910's and demonstrates the importance of being a union member at the time and the badge provided by the unionAustralian Tramway Employees Association (Tramways Union) badge. Badge made on a brass or metal backing with a gold (9ct) plating with words "Australian Tramway Employees Association" on outer edge of badge with a royal blue enamel background. In centre of badge has the Australian coat of arms with a railway type spoke wheel above the logo and underneath the coat of arms the words "Federated Australia" in a banner. Has a steel ring through a hole in the top of the badge. On back of badge has stamped into the badge "John Prisk / Member / Since 1912". On the base of the badge has words "APFX 9ct" stamped into the bottom of the badge. See image files for front and back of badge. See worksheets in Reg. Item 3140 for details about Jack and his SEC driving career.tramways, trams, sec, drivers, esco, unions, badges, aeta, employees

Yields information about the construction method of High St Northcote Melbourne, Bourke St and the construction of the new trams at the time for Melbourne.June 1955 issue of Electric Traction, Vol X No. 6 - featuring Melbourne No.996 in High St Northcote, during the construction of the tramway with two trams being ferried to the new Preston depot. See detail caption. Only one line shown, the second is under construction in the rear. Features articles on the construction of the Bourke St routes, construction of new W7 (known then as SW6c), tramcars, possible new routes in Melbourne, news from Pittsburgh, Victorian Railways, Bourke St. roll, AETA notes.Stamp of "D.F. Jowett etc" in top left hand corner.trams, tramways, melbourne, bourke st, tramcar construction

Black and white photograph of Geelong No. 23 at the Geelong Railway Statin with one of the crew leaning on the bumper bar of the tram. Appears the tram has the destination of Depot. Photographer - Leon Marshall-Wood, March 1947. .1 - Copy small format print from Lloyd Rogers collection via Robert Green 2/2014. Added 4-4-2019 - two copies added. On rear in pencil "March 1947, S/S, L M-W" and in ink within a red ink stamp "Traction 5566" Also cropping marks along top edge. On rear of small copy print 4194.1 - "Geelong" in top left hand corner.tramways, trams, geelong, railway station, tram 23

Book, titled "Door and Step Control", 192 pages printed on white art paper, with green inside covers and end covers, 12 sections, full bound, sewn into green Rexene outside covers with title and company logo in gold on front cover and publisher "National Pneumatic Company" on spine. Details equipment available for control of doors and steps using compressed air, manual methods, with photos of various types of railway and tramway vehicles, equipment and drawings. Has an index. Also details of sash (window) and garage door control systems. Has been stamped with the ESCo Company stamp in a number of places.trams, tramways, tramcar equipment, doors, safety

Provides information about a system of safe working on a single line tramway or interurban railway or tram line. Has an illustration of the signal, coloured on the front cover. Gives details of the company, automatic electric block signals for 'railways' - interurban operation. The type K2-signal is one that can register up to 15 cars into and out of a section. Gives details, line diagrams and electrical details of this signal works, installation requirements and Trolley Contactors. Centre page has an electric diagram. Received by ESCo 4/11/1926.Yields information about a system on controlling vehicles on a single line railway or tramway section.Twenty page book, printed on art paper, centre page electrical diagram and light blue covers, titled "United States Electric Signals - Type K-2 Signal", with three centre staples. Noted by stamp on page 1 "Nachod and United States Signal Co. Inc. successors to the United States Electric Signal Co. 4771 - 4777 Louisville Avenue, Louisville Ky USA"The "Electric Supply Co. of Victoria 4/11/1926" in purple ink on the front cover, page 1and 5. On page 1 in black stamp ink "Nachod and United States Signal Co. Inc. successors to the United States Electric Signal Co. 4771 - 4777 Louisville Avenue, Louisville Ky USA" and on top of page 1 "Ballarat Tramway Preservation Society Catalogue No. 2" in black ink. On page 20 at bottom :From Nachod and United States Signal Co. Incorporated Louisville".trams, tramways, signals, railways, tramways

Kodachrome Transparency - 35mm slide - cardboard mount, with one side with red border and words "Kodachrome Transparency / Processed by Kodak" top and bottom. Photo taken by Ben Parle 8/4/1958. Has slide No. "16" stamped in red in top corner. Photo of Ballarat No. 42 crossing the rail crossing, Lydiard St. North, Ballarat Railway Station. Taken from the footbridge within the station roof. A K class hauled goods is waiting on platform No. 2 to leave the station. Has the signal gantry and "B" signal box in the background. "Lydiard St Ballarat 8-4-58"tramways, trams, lydiard st, railway, level crossings, ballarat railway station, tram 42

White cardboard mount, 35mm slide, from the Association of Railway Enthusiast's film strip titled "Provincial Tramway Film Strip" of No. 12 turning from Main St into Barkly St. with the Ballarat (Ballarat East) Fire Station in the background. Photo taken Sept. 1971. Has the sign of the AMPOL service station in the background. The film strip notes (Reg. Item 2560), provided the following caption details: "No. 12 squeals around the same curve, overseen by the Ballarat Fire Station. - (Sept. '71 (Graham Evans)" See image btm2565p.tif for high level scan of image. Stamped on base of slide "11773" and written in ink on top edge "12 Mt Pleasant Line Ballarat"tramways, trams, are, film strip, mt pleasant, barkly st, tram 12

White cardboard mount, 35mm slide, from the Association of Railway Enthusiast's film strip titled "Provincial Tramway Film Strip" of No. 40 North bound for Lydiard St. North at the Railway Gates, with the gates closed. Tram carrying a heavy load of passengers. Railway station building and car park in background. Taken from the signal box. The film strip notes (Reg. Item 2560), provided the following caption details: "Principal feature of note on the "LYDIARD St. Nth." line was the level crossing at Ballarat Station. A well loaded No.40 waits patiently at the closed gates for a train.- Sept.'71 (Harry Jackson)" See image btm2566p.tif for high level scan of image. Stamped on base of slide "11776" and written in ink on top edge "No. 40 Lydiard St Ballarat"tramways, trams, are, film strip, lydiard st north, railway crossing, tram 40

White cardboard mount, 35mm slide, from the Association of Railway Enthusiast's film strip titled "Provincial Tramway Film Strip" of Tram 12 bound for Gardens, photographed across the median strip plantation near Dawson St. with St. Peters Church in the background. The film strip notes (Reg. Item 2560), provided the following caption details: "The wide Avenue of Sturt St. was the central spine of the Ballarat system -all routes traversed it for at least part of its length. Here No. 12 "GARDENS" bound, is seen through the foliage of the centre plantation in Sturt St. -Sept. '71 (Glen Mills)" See image btm2567p.tif for high level scan of image. Stamped on base of slide "11777" and written in ink on top edge "No. 12 Sturt St Ballarat"tramways, trams, are, film strip, sturt st, st peters, tram 12