Photograph of a timber honour boardworld war one, world war, mt pleasant state school, honour board, barnett, mcgregor, gribble, pollock, ross, jolly, sargeant, eggington, jerram, frank, hind, lingham, king, may, renfree, chandler, wight, zilles, matthews, slater, rowsell, hallett, peice, simpson, webb, coffet, tobert, buchanan, burrows, brazenor, cochrane, macdonald, ottaway, smith, o'bern, ware, treloar, saxton, wilson, stark, greenwood, orr, nankervis, burge, rooney, hoskin, bell, dunstan, craig, pattie, carroll, moon, bieske, page, richards, lockett, collett, frampton, williams, symonds, mcdonald, hicks, selmon, britton, martell, bolton, westcott, simper, cowdell, doepel, commons, hooley, gates, campbell, martin, neville, aikins, price, jeffree, rogers, murrie, fraser, cunningham, gedling, zazzard, malcolm, thomas, spears, hyland, pascoe, davis, peters, martnell, hill, reynolds, parkin, dobson, pope, stratford, scott, preston, adamson, lucas, bailey, jones, wrigley, morrell, gullan, provis, semmens, whittle, falla, gluyas, barrett, berryman, carincross, twaits, porter, heard, edwards, hand, robb, grant, bishop, dean, graham, mcallester

Specimens illlustrating process control & finished product.Timber demonstration wall panelMunitions Supply Laboratories. Munitions Supply Board. Department of Defence

Timber board with gold writing.

Colour photograph of a timber door.old colonists' hall, ballarat old colonists' association, doors, lydiard street

Carlton FC Victorian Schoolboys Under 15 SquadTeam photo of players & officials of squad that represented Carlton FC Vic Schoolboys Carnival 1990. Notable individuals; Brad Lloyd current (2019) Carlton FC Manager, Matthew Allan Played senior football with Carlton.Timber Framed Team Photo

Carlton FCs U15 Schoolboys Squad 1986Photo of players & officials that represented Carlton in 1986 U15 Carnival. Notable individuals; Andrew Cavedon played senior football for Carlton FC, Brett Ratten Career : 1990 - 2003 Debut : Round 22, 1990 vs Fitzroy, aged 19 years, 52 days Carlton Player No. 969 Games : 255 Goals : 117 Last Game : Round 10, 2003 vs Fremantle, aged 31 years, 324 days Guernsey Nos. 40 (1990) and 7 (1991-2003) Height : 184 cm (6 ft. 1 in.) Weight : 88 kg (13 stone, 12 lbs.) DOB : 11 July, 1971 Premiership Player 1995 Captain: 2002 - 2003 Best and Fairest: 1995, 1997, 2000 (tied) Carlton Hall of Fame (1999) All Australian: 2000, 2001 Coach: Round 17, 2007 - Round 23, 2012 Location of photo possibly Princes Park Gardens adjacent to Carlton GroundTimber Framed Colour Photo

Melton Timber and Hardware Calendarlocal identities

Crest mounted on dark timberNaval and Military Club

Oil painting of a lemon-scented gum at Heidelberg Golf Course, painted by Joy Kirwan. The corner of the old pro shop is on the right, the putting green in foreground.An original painting of part of the HGC groundsOil painting with timber frame Signed "Joy Kirwan"heidelberg golf club, joy kirwan, oil paintings

This clock has been changed to battery operation.Timber cased wall clock old colonists' association, ballarat, ballarat old colonists' club, clock

The D26 is an authentic outrigger logging barge - one of four that were towed by P.S. Adelaide for 80 years of its working life. In March 1987 Council purchased the barge from Deakin Shire in South Australia for $15,000. However, its restoration was put on hold until the crew had completed work on the P.S. Enterprise, eventually beginning in 1988 using local red gum. The barge was relaunched at Echuca East on Australia Day, 1990. The D26 remains at the Port of Echuca and on special occasions can be seen being towed by the P.S. Adelaide for demonstrations. The restored D26 outrigger barge is an example of early 20th century boat building technology developed for transporting reg gum logs downstream along the Murray River, often from the Barmah Forest to the Murray River Sawmills at Echuca. It shows the resourcefulness and manual transport techniques for a timber that does not float and had to be chained to the outrigging logs laying perpendicular to the hull. These outrigger barges could be let go to float with the current downstream with a bargeman onboard. Often there was no tiller or helm, but a chain was tied to the ballast at the back to keep the barge in the centre of the river channel. This allowed the Murray River Sawmills built 4 barges to go behind the PS Adelaide, the A11, the B22, the C24 and the D26. Timber outrigger logging bargeD26d26, p.s. adelaide, logging industry, murray river sawmill

Something new has happened in Kylie Stillman’s work. It is not a departure. Perhaps a better way of explaining it would be an inward looking, a reflection on process and purpose. In the twelve small book stacks that make up this series, we find not birds or trees – the forms that have become familiar tropes in Kylie’s art – but a stroke, a scribble, a loop, a weave. In Kylie’s words these are: 'the basic structural elements and gestures that make things things - the stroke that makes a painting, the scribble that makes a pen work, the notation that makes writing, the intertwining of wool that makes a garment, the weave of fibres that make furnishings'. - Chloe Watson (2013)Paperback books and timber baseaustralian art, sculpture, female artist

The original small, pioneer cottage was built in the late 1840s to early1850s, by an unknown pioneer. It was located on part of a 30 Acre allotment that was originally part of Dendy’s Special Survey granted in 1841. The doors and window sashes, (made of red deal joinery timber), as well as the brass locks and fittings, are from the original cottage, and were imported from England. The fire-place bricks are from the original cottage, and are sun-dried, (not kiln fired), and are hand-made. Convict marks can be seen on two bricks. There is a small display of external cladding shingles from the original pioneer cottage. These shingles were hand-split, and most likely made from locally collected timber The nails included in this display were used to fasten the shingles on the original cottage, and are also hand-made. The cottage was occupied by William Box and family from 1865 until 1914 when it was sold to William Reitman who resided there until 1950. The enamel nameplate, “Colonial”, on the wall of the cottage, was the name chosen for the original pioneer cottage by Mr William Reitman, when he purchased the property in around 1915, for 1200 Pounds approximately. In 1974 Mr Lewis, a timber specialist, found the dilapidated building on property he had recently purchased in Jasper Rd and suggested it be reconstructed and relocated. Moorabbin Council agreed and the cottage was rebuilt just about 250 metres from its original site. The cost of the rebuild was met by 'Victoria's 150th Committee, plus a small grant from the City of Moorabbin, and Mr Laurie Lewis donated much of the timber for the reconstruction. The re-constructed cottage plan has followed faithfully the original dimensions, and plan of the original pioneer cottage, and as many original items from that cottage’s long occupation have been incorporated. The photographs in Album 1 record the progress of the reconstruction from February 1984 to the First Public Open Day November 18th 1984The Moorabbin Standard was the local Newspaper for the City of Moorabbin during the 20th century until it was absorbed into the Leader Newspaper Group Pty Ltd. Mrs H. Deam and Mr Arthur Smith, CMHS members, kept this article to record the progress of the ‘Reconstruction’ from February 1984 to November 1984. This article 6/7/1977 notes that Mr Lewis jnr states "The National Trust is not interested in the house because it is built of wood". and that Cr Max Fox MCC states " It is too easy to knock things down and regret the loss of these pieces of history later on". Although 'Box Cottage' is a re-construction, it is an unique museum that, being located in the midst of a modern community in Ormond Victoria, can educate and demonstrate many aspects of the early settler’s way of life in Victoria. As such, it is an invaluable resource for students and all kinds of visitors. The Moorabbin Standard Newspaper article 6/7/1977 with 2 x black and white photographs of Box Cottage and apprentice Malcolm Proven holding a convict brick when the derelict building was discovered by Mr Laurie Lewis jnr. on the property of Lewis Timber Yard, Jasper Road, McKinnon Written on the article ; 6/7/1977 Moorabbin Standardbrighton, moorabbin, highett, ormond, mckinnon, cottages, pioneers, colonial, dendy henry, box william, box elizabeth, reitman william, convicts lewis timber co. ltd., deam h, smith arthur, museums, box alonzo, moody & smith builders highett, the moorabbin standard newspaper, the leader newspaper pty ltd., fox max , lewis laurie, moorabbin city council, national trust,

Saw Bench - New Record Saw Bench Timber framed with steel wheels, belt driven saw blade powered by a Rosbery internal combustion engine. The Rosebery Engine No C28437 R.P.M 800 H.P. 6 Manufactured By Westinghouse Rosebery Pty.Ltd. Sydney Rosebery Engine Works Ltd began as the engine and pump manufacturing division of Buzacott & Company, and in 1923 became an incorporated company. In 1935, Westinghouse gave Rosebery Engine Works the right to manufacture and sell nearly all Westinghouse products. The name of the company then changed to Westinghouse Rosebery Ltd From the late nineteenth century, petrol engines gradually supplanted steam engines for running a wide range of machines, and in turn petrol engines were largely supplanted by electric motors. The Champion was a successful small petrol engine made by the large Sydney company, Westinghouse Rosebery, based on the American-designed Fuller and Johnson engine. With hopper cooling and a fuel tank between the skids, and weighing only 240 pounds (109 kg), it was easy to mount on wheeled transport, making the Champion a self-contained mobile source of power. Engines of this type were used in rural areas for driving chaff cutters, small saw benches, pumps and orchard sprayers. These engines were also commonly used in both rural and urban areas for powering concrete mixers. Both Westinghouse Rosebery in NSW and Toowoomba Foundry in Queensland made these engines in large quantities, beginning in the 1920s when tariff protection made local manufacturing viable. The production of small petrol engines continued in Australia until the 1970s, when reduced tariff protection led to increased competition from cheaper imported engines. Historic - Industrial Timber working - belt driven saw blade powered by a Rosbery internal combustion engine. Timber framed with steel wheels, belt driven saw blade powered by a Rosbery internal combustion engine. The Rosebery Engine No c28437 R.P.M 800 H.P. 6 Manufactured By Westinghouse Rosebery Pty.ltd. Sydneysaw bench, puffing billy, new record, internal combustioin, westinghouse rosebery pty.ltd., rosebery pty, internal combustion engine.

Home of Mr and Mrs Henry Haeffner and family from about 1920 until 1980s. Built in about 1910, the house retained the popular Victorian bullnose verandah roof but added timber Federation style fretwork and the verandah had become shortened. The chimneys are slim in Federation style. A sale notice for the property was donated by Marj Higgins (nee Haeffner); it is filed with other information relating to the property. A black and white photo of an Edwardian style timber home. The home has the popular bullnose verandah roof and Federation style fretwork. The chimneys are slim in Federation style. A low picket fence runs across the front of the property. A "For Sale" sign is at the front advertising the auction on 28 Julyedwardian style, federation style, (mr) henry haeffner, clyde street, surrey hills, 1910-1920

Timber Mitre Box, with wing nuts for stability Made of timber and steel construction No maker's marks Minor rust on screwsnil

Hand operated wringer; timber frame with metal fittings; timber handle; 2 top screws; scattered nail holesCentre: FALCON / LOOSEN TOP SCREWS / WHEN NOT IN USE / IMPROVED PAT'D . . . Sides: EXTRA / HIGH GRADE / WARRANTED / TRADE / MARK . . . Flap: HORSE SHOE BRAND / CLOTHES WRINGER / WARRANTED 3 YEARS FOR FAMILY USE Underside of Flap: THIS WRINGER HAS WARRANTED RUBBER / ROLLS / VULCANIZED TO THE SHAFTS / PUT A LITTLE OIL OR LARD ON THE BEARINGS / BEFORE USING AND LOOSEN TOP SCREWS / WHEN THE WRINGER IS NOT IN USEwringer, mangle, laundry

This timber fragment is from the shipwreck of the SCHOMBERG (1855). The bow of the ship broke off after an unsuccessful salvage attempt to tow her off the Peterborough reef. At the wreck-site the submerged hull points north towards the beach but the front section is missing. Parts of the bow have been carried away by the eastward bearing ocean currents and have come ashore on the western coast of New Zealand’s South Island. Don Charlwood writes in Wrecks & Reputations (1977) that in 1871 “a piece of wreckage over 20 feet long and 12 feet wide was brought out” by land from its remote location at Tauperika Creek. In 1875 “an even larger section was brought out by sea”. It was suggested at the time that these relics of a large wooden sailing ship were from the wreck of the SCHOMBERG some 20 years earlier on the Victorian coast. “To corroborate the theory”, Charlwood continues, “a piece was sent to Halls of Aberdeen [the ship’s builders in Scotland]. They identified it as having come from the ship they had launched with such pride in 1852.” Charlwood, whose great-grandparents were passengers on the SCHOMBERG’s fateful maiden voyage, acquired some samples of the wreckage timber recovered in New Zealand, and brought them back with him to Australia. In 1976 “comparison was made of timbers from the New Zealand find and timber from the remains of the hull at Peterborough. They proved to be from the same ship.” The extraordinary journey of these pieces of wood from the once mighty clipper ship SCHOMBERG came to an end in 1984, when they were given to Flagstaff Hill by the author, and reunited with other shipwreck timbers and copper bolts from the vessel that are on display at the Maritime Village. The shipwreck of the SCHOMBERG is of State significance - Victorian Heritage Register S612A piece of wood broken from the timbers of the shipwrecked SCHOMBERG (1855, Peterborough) and retrieved from the southwest coast of New Zealand’s South Island. The artefact is a light grey colour with plain long grain and bears a reddish stain on parts. Part of a drilled hole is red stained with traces of corroded metal still evident. The piece appears to have split off from other fragments that are in the Flagstaff Hill collection (6257, 6258) and it is in fragile condition.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwreck timber, don charlwood, ‘wrecks & reputations’

Cocks Pioneer old mine timbers. Cocks Pioneer Electric Gold & Tin Mine Company was formed in 1899. The company's first power station, located at the eastern end of the valley began operating with its 340 Kilowatt steam-powered generator. By 1909, from 2,500,000 cubic yards worked, reported recovery was 17,284 ounces of gold and 224 tons of tin ore. By 1909, Cocks Pioneer’s power plant had become inadequate and uneconomical. The barge was floated downstream about a mile, but lost time caused the operations to cease. Following testing, a new mine was established by diverting Reid's Creek at a cost of £25 000. Settling dams were built, one of which held 1,935,900 cubic feet. Sold earth banks, built against a wall of stringy bark saplings constructed and laced with vertical props, were built. In 1914, the company was reformed as Cock’s Pioneer Gold and Tin Mines NL, another power station was constructed at the western end of the township, near the junction of Clear and Reid's Creeks. From 6,800,000 cubic yards of material processed, the returns were 64,397 ounces of gold and 855 ton of tin. Cocks Pioneer mine then moved the barge downs stream and continued sluicing. In 1929 Cocks Pioneer Electric Gold and Tin Mining Company ceased operations due to a drop in values. Cock’s Pioneer Gold and Tin Mines NL carried on large-scale hydraulic sluicing operations until 1941. mining, gold, tin, open cut, gold mining, tin mining, cocks pioneer, el dorado, eldorado

By 1910 revenue from the Beech Forest railway was $15,500, working expenditure $12,000, with a net loss (including interest charges) of about $4,000. This and the following year were the lowest net losses ever experienced. Passenger journeys rose steadily, outwards goods traffic rose to a record 12,959 tons (in 1911), and inwards goods traffic was a record 3,359 tons.. The railway station possessed a goods shed, stock race and yards, engine shed, coal stage, crew cabins, a refreshment room, and a four-roomed station building, with the station staff to match. Beech Forest was the principal despatch centre at this stage for split timber. Bill Devitt laid a timber tramway to the Beech Forest railway station to cart the palings for on-shipment..B/W. 177mm x 271mm. A general view from the eastern end of Beech Forest station in 1910. Note the Goods Shed, three tracks with No.3 Road having a NU louvre van and loaded NQR wagons, timber stacks to the left, and Devitt's Tramway with unloaded trolleys at the lower left. To the right, crew cabins with shops and houses in the background.beech forest; railways; timber; tramway;

Williamstown formed as a Municipal Government in 1856 and applied to the Victorian Government for a set of standard weights that would ensure all businesses etc would weigh their goods correctly. They arrived in Williamstown and were used from 1860 until 1966 when decimalisation was established in Australia. TThese weights were the first of their kind to be acquired in Victoria.15 round brass Imperial standard weights in 3 timber cases, weights weighing 1/2oz to 56lbs. Numbers 1 to 11 with rounded knobs and largest 4 (12 to 15) with rounded handles. 12 smallest in timber case, next 2 weights in timber case & largest in timber case.13 have Potter London engraved, also stamped are various verification dates. weights, brass, imperial

The barrel was used in the Wodonga Court House as part of the selection process for jurors. It was a standard issue barrel used throughout Victoria. It was retrieved from the ruins of the court house which was destroyed by fire. It was then donated to the Wodonga Historical Society. The timber display stand was made and donated by Jake Tooley, a Wodonga Historical Society member, The Court House was situated in the Customs Store building alongside the Wodonga Police Station in 93 High Street. (The house where the Police Station was had originally been the home of the Customs Officer). In early 1964, the court house building was burnt beyond repair and furniture and other property destroyed. The cause of the fire was never found. The Police Station was lucky to survive but only because of the efforts of the local Fire Brigade. After the fire, the court was held first at the old Fire Station premises near where the Wodonga Post Office is near Woodland Grove, then it moved to a vacant building in Mitchell Street which was later turned into a Child Care Centre. Foundations for the new court house in Elgin Street were laid in October 1965 Local significance due to its use in the Wodonga Court House and its survival of a major fire. State significance as it documents a procedure used in the Victorian Court and Legal system Cylindrical metal-iron barrel painted black with writing stenciled on the front in white The timber mount was made for storage and display is not part of the original object,Inscription on Barrel "WODONGA./ Jurors in use./ Special"wodonga court, jurors, selection, legal system, fire

This timber fragment is from the shipwreck of the SCHOMBERG (1855). The bow of the ship broke off after an unsuccessful salvage attempt to tow her off the Peterborough reef. At the wreck-site the submerged hull points north towards the beach but the front section is missing. Parts of the bow have been carried away by the eastward bearing ocean currents and have come ashore on the western coast of New Zealand’s South Island. Don Charlwood writes in Wrecks & Reputations (1977) that in 1871 “a piece of wreckage over 20 feet long and 12 feet wide was brought out” by land from its remote location at Tauperika Creek. In 1875 “an even larger section was brought out by sea”. It was suggested at the time that these relics of a large wooden sailing ship were from the wreck of the SCHOMBERG some 20 years earlier on the Victorian coast. “To corroborate the theory”, Charlwood continues, “a piece was sent to Halls of Aberdeen [the ship’s builders in Scotland]. They identified it as having come from the ship they had launched with such pride in 1852.” Charlwood, whose great-grandparents were passengers on the SCHOMBERG’s fateful maiden voyage, acquired some samples of the wreckage timber recovered in New Zealand, and brought them back with him to Australia. In 1976 “comparison was made of timbers from the New Zealand find and timber from the remains of the hull at Peterborough. They proved to be from the same ship.” The extraordinary journey of these pieces of wood from the once mighty clipper ship SCHOMBERG came to an end in 1984, when they were given to Flagstaff Hill by the author, and reunited with other shipwreck timbers and copper bolts from the vessel that are on display at the Maritime Village. The shipwreck of the SCHOMBERG is of State significance - Victorian Heritage Register S612A small piece of wood broken from the timbers of the shipwrecked clipper SCHOMBERG (1855, Peterborough) and retrieved from the southwest coast of New Zealand’s South Island. The artefact bears a reddish stain on exposed parts but the main surface is grey coloured. It appears to have been split off other wood fragments in the Flagstaff Hill collection (6257, 6259). It presents as a lighter less dense wood than oak, but may have lost mass through submersion.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwreck timber, don charlwood, ‘wrecks & reputations’

Colour photograph of the historic Suggan Buggan school showing timber table and benches with slatted timber walls. Suggan Buggan Victoriahistoric buildings, schools

A lady's brown soft leather wallet with 3 sections and a brass clasp A.C.I ENNIS WITH COMPLIMENTS FROM / JAMES LYONS LTD / SAWMILLERS & TIMBER MERCHANTS / CAIRNS N.Q.moorabbin, brighton, early settlers, pioneers, cheltenham, craftwork, leather, wallets, purses

From 1945 a sawmill, the Calco Mill, was formed to cart sawn timber initially from the Zappelli's property on Denherts Track. The plant was later shifted to Pul's property and, in 1951, finally moved to a new mill in the Beech Forest railway yard. Potato output also rose, around 280 hectares and was shipped exclusively by rail until 1955. The railway was very busy, in fact so busy that potato farmers and especially saw millers started agitating for road transport.G41 locomotive, four NQR loaded wagons, and a louvred van near the Goods Shed. Next line, three loaded and three empty NQR wagons. In the foreground near the station building, a louvred van. A water tank and timber mill in the background. B/Wbeech forest; railways; loco g41;