Made by Stanley Works Pty Ltd a Nunawading company and used by Harley HallA screwdriver with a red handle with Stanley Australia 65.581 written on the handleStanley Australia 65.581stanley, screwdriver, tool, harley hall

Made by Stanley, a Nunawading Company and used by Harley HallA 3 point Phillips screwdriver with a green handle marked with Stanley Australia 65.733Stanley Australia 65.733stanley, screwdriver, tool, harley hall

Screwdriver with a yellow handle marked Stanley Australia 65.707Stanley Australia 65.707stanley, screwdriver, tool

Used at Ballarat School of Mines Building Studies, Yuille Street, Ballarat. This probably in the 1960s. It was sourced from David Flintoff. Steel cased electric motor, two wooden handles, power cord and spannerUpper Plate: STANLEY ELECTRIC TOOLS; Type H39; Model B; Serial No. CT 4887 Lower Plate: STANLEY H-13-B; US Pat. - 2562143stanley router, electric router, ballarat school of mines, building studies, david flintoff

Stanley Works Pty Ltd took over Turner Manufacturing, Nunawading, in 1970. They closed their doors in 1992.Coloured photo of Stanley Works Pty Ltd building, with three signs - Stanley, Stanley Hardware, Hardware Divisiontools, stanley works pty ltd, manufacturing industry

The house in the top right of the photo was built in 1922 for Edgar Walker. The house at 8 Meerut Street has been used as a hospital, and is on the Whitehorse historical register. The house in the bottom right of the photo was built c1934 for Stanley Walker, at 456 Mitcham Road, Mitcham.Black and white aerial photograph showing the Mitcham houses of Edgar and Stanley Walkerwalker, edgar edwardes, stanley, houses, mitcham road, mitcham, no.456, meerut street, no.8, heritage overlay, city of whitehorse

Mounted photo of Dr. Stanley Cochrane.cochrane, stanley, dr.

Councillor Joseph Haweil spoke to a Legacy Comradeship Luncheon on 27 June 2023. Cr Haweil is Mayor of Hume City and a member of the Assyrian community in Melbourne. He spoke about the actions of Stanley Savige during World War 1 that lead to him saving over 50,000 Assyrian refugees in Persia. After the speech he presented President Kerry Jenke with this artwork by Mr Furat Yosip.The artworks shows that the Assyrian Community are grateful for the life of Stan Savige.Wooden board with burnt etching of Stanley Savige with a gold coloured plaque.Plaque says "Presented to Melbourne Legacy / In Eternal Gratitude and Remembrance of Lieutenant General Sir Stanley George Savige, KBE CB DSO MC / By the Assyrian Community of Victoria at the Assyrian Martys Day Commemoration, Coolaroo - 5 August 2018 / Artist: Mr Furat Yosip"stan savige, assyrians

Home and garden at 23 Stanley Avenue; Charles Hanlin, builder; Landscape by Gordon Ford.11 colour prints 10 x 15 cmhouses, mudbrick, gayle blackwood collection, charles hanlin, gordon ford, stanley avenue, eltham

Coloured photo of Dr. Stanley Cochrane in Army uniform.cochrane, stanley, dr.

This Stanley plane was used in the making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This plane is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This plane was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Plane, No 120, made in USA by Stanley. This small plane is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”."Stanley", "USA", "No. 120"flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, wood working tool, plane, stanley of usa, sovereign of the sea, ship model, hobby, ship model tool

Used for lodge meetings and for community events and celebrationsThis building was removed from the site in 1979Black and white photographG Craig photographer Stanleystanley, temperance hall, lodge,

Elizabeth Hogan married Gus Gervasoni. They had one son, John Hogan Gervasoni. Black and white photo of Gus Gervasoni (right) and his son John Hogan Gervasoni at their Stanley Street home in Daylesford. .1) Gus Gervasoni stands beside a horse and foal, while his son, John Hogan Gervasoni, sits on the horse. .2) John Hogan Gervasoni with a foal. daylesford, gus gervasoni, john hogan gervasoni, horse, stanley street, daylesford

In 1970,Stanley Works took over toolmakers, Turner Manufacturing Company, who were situated in Whitehorse Road, Nunawading. Stanley Works Pty Ltd, shut their doors in 1993Coloured photograph of the head office at Stanley Works Pty. Ltd, Nunawading Circa 1972. Yellow Stanley sign on the roof. Cars parked in front of building. Power pole an left.stanley works pty. ltd, tools, manufacturing industry, turner manufacturing company

The invention of a hand drill is credited to Arthur James Arnot and William Blanch Brain of Melbourne, Australia who patented the electric drill in 1889. In 1895, the first portable handheld drill was created by brothers Wilhem & Carl Fein of Stuttgart, Germany. Hand-powered devices have been used for millennia. However, during the last quarter of the 19th century a radically improved generation of tools appeared. These tools took advantage of modern mass production machinery and processes (like interchangeable parts) and an increased availability in superior material (metal instead of wood). One of the outcomes included an array of new drilling machines. These human-powered tools were a vast improvement over earlier tools.This item is an example of a commonly used domestic tool - pre power tools.A Stanley hand drill with two wooden handles. The red wheel is painted metal. On red wheel - STANLEY ENGLANDwoodwork tool hand-drill

49 page typed document Title page, Preface and list of Trust members and 47 numbered pages 26 x 20.6 cm Two copieseltham war memorial trust, stanley s addison collection

Stanly Addison's notes for his Outline History of the Eltham War Memorial Trust31 hand written foolscap pageseltham war memorial trust, stanley s addison

Ill, p.859.non-fictionStanley Gibbons Postage stamp catalogue 1950, Part II Foreign countries Europestamp collecting, philately

In 1970 - Titan Pty Ltd acquired Turner Industries of Nunawading (Turner had commenced making tools there in 1936). In 1971 the Stanley Works was formed from Stanley-Titan and Turner Industries. Stanley Works ceased manufacture on the Nunawading site in 1992. The site now belongs to Harvey NormanBlack and white photo c1972 of Stanley Works, Whitehorse Road, Nunawading. Now the site of Harvey Normanstanley works pty ltd, tools

Stanley Works took over Turner Industries in 1970Black and white photograph of a display case of screwdrivers at Stanley Works sign 'The right screwdriver for every job'stanley works pty ltd

Painted by South African H von Gruenwaldt, an internee at Camp 13 . Portrait of Captain Stanley Llewellyn Seal.Pastel of Captain Stanley Llewllyn Seal in a Captain's uniform. Small moustache and pipe. Framedpainting, von gruenwaldt hw, camp 13, ww2 camp 13, captain stanley llewellyn seal, south african internee

In 1970 Stanley Works Pty. Ltd. took over toolmaker, Turner Manufacturing Company, who were situated in Whitehorse Road, Nunawading.Coloured photograph of a male worker in a blue boiler suit in a Stanley Works machine room.tools, stanley works pty. ltd, manufacturing industry

Legatee Stanley Savige passed away in 1954 and is buried in Boorondara General Cemetery, Kew. He is buried with his wife, Lilian who passed away just two months before him. Photos were taken of the gravesite after the headstones were installed. Possibly to show other legatees.Legatee Stan Savige was held in very high regard due to his career and founding of Legacy. This shows his grave was visited by a legatee who took the photos to show others.Colour photo x 2 of Legatee Stanley Savige's grave.stan savige, founding legatee, memorial

The Trust was set up as a memorial to Sir Stanley Savige. The object of the Trust was to further the work of the Junior Legacy movement in Melbourne. Over the first ten years of the trust 248 families were assisted. Includes original Trust Deed, much financial information, contributors and amounts contributed. Individual items to be scanned and itemised when possible. TBC.Significant in that the Board of Management of Melbourne Legacy saw fit to commemerate Sir Stanley Savige by one, a biography and two in a manner more fitting, by the establishment of a trust fund, to further the assistance that Melbourne Legacy could give to the families of deceased service personnel. Folder of documents pertaining to the Sir Stanley Savige Memorial Trust.Manilla folder, white sticker with blue and white border with title typed in black and underlined in red. Foolscap,quarto paper, divisions all typed in black ink, headings underlined in red. Some handwritten notes and letters.savige trust account, history

In 1970 Stanley Works took over Turner Industries in Nunawading. They manufactured hardware for doors and windows, lawnmowers and tools.Black and white photograph of a man standing to the left of a large machine called a vibratory finisher. Stanley Works Pty Ltdstanley works pty ltd tools machinery

A portrait of Stanley Savige, the founder of Legacy, by Ernest Buckmaster. It was presented to Melbourne Legacy in the late 1940s by the 24th Battalion. Ernest William Buckmaster was an Australian artist born in Victoria. He won the Archibald Prize in 1932 with a portrait of Sir William Irvine. He also served as an Australian war artist during World War II. A newspaper article at the time said it had been an entrant in the Archibald Prize (see item 00364).It indicates the high esteem in which Sir Stanley Savige was held by the Australian public for both his war service, and for founding Legacy, for him to be commemorated in a portrait at Legacy House by an accomplished artist.Colour oil painting of Sir Stanley Savige by Buckmaster.stan savige, portrait

In 1970 Stanley Works Pty. Ltd. took over toolmaker, Turner Manufacturing Company who were situated in Whitehorse Road, Nunawading.Coloured photograph of lock-broaching in the Stanley Works tool plant in Nunawading. Man to the left of photograph holding a steel object.stanley works pty. ltd. tools manufacturing industry nunawading

The Stanley Works was founded by Frederick Trent Stanley in 1843, originally a bolt and door hardware manufacturing company located in New Britain, Connecticut, USA. The Stanley Rule and Level Company was founded in 1857 by Henry Stanley in New Britain, Connecticut. In 1920, this company was independent from Trent Stanley's works but they merged with the separate but related Stanley Works, that was founded by Henry Stanley's cousin Frederick Trent Stanley, and continued operating as its hand tools division. At this time after the merger the “Sweetheart” Trademark was adopted for tools made between 1922 to 1935 with augers manufactured during this time having the “AA” trademark and this is when the Stanley company we know today came into being. Around 1937, Stanley acquired the British J. A. Chapman company, a British manufacturer of carpentry tools and other items (including bayonets during World War I) formerly located in Sheffield, from Norman Neill. This helped Stanley to enter the British market.A early tool manufactured by an emerging company that today produces tools for sale in just about every country in the world. The subject items trademark shows the item was produced between 1922-1935 at a time when the company had just merged and was transitioning into Stanley Tools Ltd.Nose bit auger. Similar to shell bit except the nose turned inwards to form a cutting lip. Stamped on shank "AA" trade mark (Stanley Tools)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village