Hay bale saws were a common agricultural tool. Ed Nolt, a Dutch resident of Pennsylvania, USA, invented the prototype for the small square baler back in the 1930s. His patent was purchased and mass produced during the 1940s. These balers quickly spread throughout the world and became a common agricultural machine. The hale bale saw was used to cut up the bales when distributing feed to livestock. As modern agricultural production has turned more to the use of large round bales, these small saws have become obsolete. This saw was used by a farmer in North Barnawatha approximately 18 kilometres from Wodonga, Victoria.This saw is representative of the agricultural tools in the mid to late 20th century.A metal saw with 2 wooden handles. The saw has a very coarse serrated edge. One of the handles is parallel to the blade, and the other handle is perpendicular to the blade.agricultural tools, hay bale saws, north east victoria

Likely from the Emerson Estate at Clear LakeMetal curved blade with wooden handle. Agricultural tool for harvesting

An adjustable metal headed hand scarifier with a wooden handle attached with a screw. It has nine teeth with the middle one lower, fixed and wider. It could be altered to suit the width of the row being worked. It was patented 1905.Patented 1905agricultural tools, agricultural equipment, tools, rakes, scarifiers, gardening tools, hand tools

Used in the 19th century.A forged steel pick with points at both ends mounted on a handmade wooden handle with a number 5 stamped on the head. It was used for loosening and breaking up compacted soil in the 19th or early 20th century.5picks, prying tools, agricultural tools, gardening tools

A metal King Eye slasher with an unusual rounded 'U' shaped open blade and a wooden handle. On the blade is stamped, 'King Eye, PATT NO, 3868 A & F PARKES & CO BIRMINGHAM England'. It was efficient for clearing thin and dense low-lying scrub or bush where an axe would be too clumsy. It is similar to a billhook, but with a longer handle.'KING EYE, PATT NO, 3868 A & F PARKES & CO BIRMINGHAM ENGLAND'tools, agricultural equipment, agricultural tools, slashers, gardening tools

Used by Wandin T Sebire.A thick curved forged steel scrub slasher - head only. It has two bent steel clamps to attach a handle, one which is small and is attached by a screw, the other large one is attached by two rivets. It was efficient for clearing thin and dense low-lying scrub or bush where an axe would be too clumsy. tools, agricultural equipment, agricultural tools, slashers, gardening tools

Used in the 19th and early 20th century.A metal scythe with a long curved wooden handle to manoeuvre the blades. There are also two shorter wooden handles or 'nibs' fitted at an angle to suit the user attached to the main handle by a metal ring. It has two curved pointed cutting blades which are attached by nuts and bolts to the handle.agricultural tools, scythes, cutting tools, agricultural equipment

A handmade slasher with a long wooden handle and a heavy sharp steel blade attached with a rivet to the handle. It was efficient for clearing thin and dense low-lying scrub or bush where an axe would be too clumsy. Indiscernable inscriptiontools, agricultural equipment, agricultural tools, slashers, gardening tools

A hand slasher with a long wooden handle and a heavy sharp steel rectangular blade attached with rivets to the handle. It was efficient for clearing thin and dense low-lying scrub, ferns or bush where an axe would be too clumsy. '232205' is stamped on the flat blade but the writing is Indiscernible. tools, agricultural equipment, agricultural tools, slashers, gardening tools

A curved steel long bladed hand sickle with a turned wooden handle which has a lined pattern on it.agricultural tools, sickles, tools, agricultural equipment

Serrated iron blade, 2 wooden handles, Hiram Holt & Co., East Wiltonhay knife, agricultural tools

Seed broadcaster were used to distribute seed across a small area or to fill in patches where seeding has been missed. This method does not ensure a uniform distribution of seeds unless the person using the machine walks at a very measured pace. It also requires a lot of time and manual labour if used in larger areas. It was most used for planting cover crops, grains, grasses and similar plants that do not need to be in neat rows. The hand-crank broadcast seed spreader was invented in 1868 by Samuel S. Speicher (aka. Spyker) in Indiana, USA. By 1955 new developments included the invention of a seed broadcaster on wheels and these smaller spreaders started to disappear.This item is representative of agricultural machinery used on a local, national and international level in the late 19th and early 20th century.A metal hand seed broadcaster. A hopper at the top was the receptacle for seed. The wheel with a handle on the side when turned drives the cogs attached to an axle. This action rotates the attached spindle with blades to propel seed out the front of the broadcaster. The broadcaster would have had a shoulder strap and a bag of seed would have been added to the hopper and secured with twine through the holes around the top.agricultural tools, farm machinery

Used in the 19th centuryA bill hook or axe-handled slasher which is an axe-handled forged metal blade with a strong curved sharp axe like edge and a straight secondary edge on the back. It has a broken wooden handle with steel or a tang which passed through the handle if it were still attached. There is stamped on the blade near the handle join - '2'. The original finish of the blade would have been, 'Japanned' which is baked black enamel. It was used to cut back scrub, small trees and woody vegetation in the 19th century.'2' stamped on the blade near where it joins the handle.slashers, cutting tools, bill hook slasher, gardening tools, agricultural tools

Used in the 19th Century'THE ANDYO' registered Hedgehog Tool. A forged steel head of a general purpose hoe with one side of the blade used as a hoe and the other pointed side possibly used to dig small furrows. It was made by Cornelius Whitehouse & Sons at Cannock Edge Tool Works - Branded Whitehouse & Sons. It was used in the 19th century.'THE ANDYO' is stamped on the pointed blade. On the hoe blade is stamped - Whitehouse & Sons CANNOCK. 'TY GWYN. agricultural tools, hoes, gardening tools, gardening hoes, steel

Used in the 19th Century. A forged steel two pronged Forked Hoe head used to break up very hard or dry ground. There is a bend at the top of the fork with a hole for the handle. It was made by a blacksmith and used in the 19th century.agricultural tools, gardening tools, steel, pitchforks

Used in the 19th Century A forged steel curved and straight blade headed hoe with a long handmade handle. It was used for chopping into the ground in the late 19th century.agricultural tools, hoes, gardening tools, gardening hoes, steel, wood

Used in the 19th century.A handmade steel wide toothed hay rake head with 14 teeth attached to a wooden top made by Wandin Sebire. There are two large holes where a handle would be attached. It was used to rake hay into heaps after scything in the 19th century. rakes, tools, hay rakes, agricultural tools, agricultural equipment

A small combined hoe and rake metal headed hand scarifier or cultivator tool with a wooden handle. It has a pointed hoe shape at one end and at the opposite two hooked spikes. It could be used in small areas such as a garden.agricultural tools, tools, rakes, scarifiers, gardening tools, hand tools, hoes

A small forged steel combined hoe and rake head hand cultivator tool. It has one flattened hoe shaped edge at one end and at the opposite, three rake prongs, and there is an extension on the head for the wooden handle to be attached. It could have been used in small areas such as a garden in the 19th century..agricultural tools, tools, rakes, gardening tools, hand tools, hoes

A thick forged steel three pronged fork hoe head made by a blacksmith. There is a bent extension piece at the fork head where a handle can be attached.agricultural tools, gardening tools, hoes, gardening forks, handtools

Used in the 19th or early 20th centuryA long handled steel vintage post hole digger with two large curved split blades. Each blade is attached to the top of the handle by three screws. It has a rotating action with the digger boring into the earth as the handle is turned. There is an attachment at the end of the steel handle for a missing turning handle.'S' is stamped on the top of the handle.tools, agricultural tools, farming equipment, garden tools

Manufactured by F.E. Kohler & Co, Canton, OhioA vintage post hole digger with two long wooden handles and two metal scooped blades. It is operated with a lever action, with the two handles pulled apart to take a 'bite' of earth. The handles are attached by a nut and bolt. There is a crowbar on the end of one handle and a rammer on the end of the other. The brand is F.E. Kohler & Co, Canton, Ohio.'Kohler Little Giant' patented.tools, agricultural tools, farming equipment, garden tools

It was used on well worked ground.A combined hoe and rake metal headed hand scarifier or cultivator tool with a long wooden handle. It has three curved metal hooks with sharp points and was used to break up the ground. It could be used in small areas such as a garden.agricultural tools, tools, rakes, scarifiers, gardening tools, hand tools, hoes

A thick forged steel three pronged fork hoe head made by a blacksmith. There is a hole at the fork head where a handle can be attached.agricultural tools, gardening tools, hoes, gardening forks, handtools

A steel spanner with two heads: one end is open-ended and the other is a ring spanner head.steel, tools, spanners, agricultural equipment, agricultural tools

Agricultural tool used on farms during the late 1800"sObject holds farming significance supplied by Holden and FrostWooden handled five prong steel forkagricultural, fork

A fern hook is an agricultural tool used for slashing or reaping crops which are then gathered in sheaves and bundled together. Primarily used for penetrating and cutting through larger and heavier foliage, this example has a bored hole, probably used for attaching a longer wooden handle.fern hook with surface rust, but made from good steel. No handle."PARKER CAST" image of feet in first ballet position, with No 6 under left foot. "1281"parker tools, fern hook, agriculture, churchill island heritage farm

A scythe is an agricultural hand tool that cuts grass and is used by making large sweeping motions through the crop. Eventually replaced by horse-drawn or motorised machinery, they are occasionally still used as they are inexpensive and efficient. There are different types of scythes with larger or smaller blades. This particular scythe was manufactured by W.A Tyzack & Co. Ltd. Set up by William Tyzack in the early 1800s in Sheffield, United Kingdom, they grew into a larger manufactory specialising in agricultural tools. Adding the ‘Horseman’ brand to their trademark in 1948, they expanded dramatically and exported throughout the Commonwealth.Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” Cast steel blade. Hole on back and of blade for hanging. Steamed handle (may not be original). Complex pipe/nut washer and five metal shims keeping blade on handle.From tip: BEST CROWN W.A. TYZACK & CO. LTD STELLA WORKS SHEFFIELD. Near handle: image of figure on horse.churchill island, scythe, wa tyzack, sheffield, machinery

A scythe is an agricultural hand tool that cuts grass and is used by making large sweeping motions through the crop. Eventually replaced by horse-drawn or motorised machinery, they are occasionally still used as they are inexpensive and efficient. There are different types of scythes with larger or smaller blades. This particular scythe has a bored hole in the handle, probably for affixing a long wooden handle. Made by Trojans and Sons, a Melbourne based company that made a wide range of gardening and agricultural tools, this scythe formed an integral part of farming on Churchill Island. scythe with surface rust, no handle, good steel, rough welds on socket, hole for mounting handle (e.g. with screw)TROJAN/264scythe, hand tools, agriculture, churchill island heritage farm

The adze is an agricultural tool, similar to an axe, but the blade is affixed perpendicular to the handle. Used primarily for smoothing or carving wood, the adze can also be used as a hoe. This adze is missing its wooden handle, which may vary in length depending on their particular purpose and can be designed for one handed or two-handed use. Rusted, well worn, blacksmith made with bias on blade. No handle. An adze is a tool similar to an axe.adze, churchill island, farm, axe, tool, tools, blacksmithing, smithing, blacksmith