Leaving Point Cook airbase conducting a low visibility cross-country flight at 11.05 am on 12 April 1942 an A25 Airspeed Oxford crashed 5 kilometres from Beech Forest. The pilot, Sergeant T.W. Penn, and two pupils, LAC R.E. Johnston and LAC J.R. Black, were killed. The airframe and engine were extensively damaged.Two pieces of crumbled aluminium metal and one piece of solid black rubber recovered from an Airspeed Oxford aeroplane.beech forest; plane crash; airspeed oxford; world war 2;

Created to supply training & recognition of friendly/enemy aircraft.Expanded the skills of recognition for air crew, ground crew and defence activities.Small bakelite British Airspeed Oxford aircraft, coloured black matt, uncluding hole for suspension and mobility.Airspeed Oxford E9-2189 D^D DLTDC

A yellow plastic cover with a window in the front. At the top right hand corner reads AAP 7531.024-3M which is written in black texta, Near the top of the cover there is the Royal Australian Air Force Insignia with Royal Australian Air force and Engineering Publication. Through the window is the title of the Manual. Inside a plastic sleeve on yellow cardboard are the full details of the manualThe manual is held together with a large metal slide.royal australian air force, manual, airspeed contactors

A yellow coloured front cover with black information. Near the top reads Australian Air Publication 7531.078-3. Above the RAAF insignia reads Royal Australia Aor Force with the rest of the details of the manula under the insignie. There s a rubber stamp on the cover which reads R.A.A.F. Library etc. There are two metal staples down the left hand side. Also there is a amendment inside the manual.royal australian air force, manual, sensitive maximum allowable airspeed indicator

Some 37,200 of these engines were built, major application was in the Airspeed Oxford aircraft.Seven-cylinder air cooled radial engine produced by Armstrong Siddeley (UK). Widely used in Airspeed Oxford and Avro Anson aircraft of WWII era. This example is in running order after having been rebuilt by team members from a very neglected state.A9600 8739D 790 Sradial engine

R.Carty 418344 qualified as pilot on Airspeed Oxford.17.4.43Rectangular blue linen bound hard cover bookForm A.18 (Revised April1937) (R.A.F. Form 414)Royal Australian Air Force Flying Log Book. Richard Carty 418344

Poynter A. 431028 qualified as a pilot on Airspeed Oxford 22-3-44Rectangular blue linen bound hard cover bookRoyal Australian Air Force Flying Log Book. Poynter A. 431028

Standard crew issue for pilots and flight engineersEquipment supplied crew with a computer to calculate true airspeed.2 black discs printed with luminous paint with plastic indicator, used for calculating true air speed.COMPUTER. TRUE AIRSPEED. A.C. TYPE G-1 A list of 4 instructions for use. Spec. No. 27367-A, MFG.DWG. No. 42D531, Order No.42-18049-P GENERAL LUMINESCENT CORPORATION, CHICAGO

This type of propeller was used on Oxford Airspeed aircraft which was a similar type as the Avro Anson and also used for training at other air schools in Australia.Wooden two blade propeller, painted black with red tip one endDRG Z 3931 /4 Cheetah X LHpropeller, cheetah, oxford airspeed,

This type first flew in 1937 and by the start of WWII it was the preferred aircraft in all Empire Air Training Schemes for multi-engine pilot training. By the beginning of WWII the Airspeed Oxford was the preferred aircraft in all Empire Air Training Schemes for multi-engine pilot training. As of April 2014, no Airspeed Oxfords remain in the world in airworthy condition and there are very few complete air frames. There are reportedly some restoration-to-fly projects underway, one in New Zealand.Full-sized replica of an Airspeed Oxford aircraft. This type of aircraft was described as a multi-engine three-seat advanced military trainer monoplane. It was a wooden construction using plywood and fabric covering and powered by two 375 HP Armstrong Siddeley Cheetah 10 engines. Parts originally used a base for this reconstruction were reckoned to be from an Oxford Mk 2 with registration A25 LX181 which was based at Point Cook and used extensively in training from the Werribee Aerodrome.

The Hutter H17 is a small single seat glider with a wing span of 9.69 metres, designed in 1934 by Wolfgang Hutter, for flying in the Austrian Alps. Construction of the museum’s example, “Sweetwings” (now registered as VH-GQM), commenced in Perth in 1949. It is one of two Hutter H17 gliders built in Western Australia by N.J. Wynne and A.G. Milligan at the time – the other “Fleetwings” (formerly VH-HDQ and since re-registered as VH-GXV) is located at Millicent, South Australia. Ownership transferred to G.R. Reichelt of Tocumwal New South Wales and later to D.B. Hunt of Thornbury in Melbourne and later Mt Isa, Queensland. It was acquired by Bill Riley of Tocumwal who donated it to the Museum. The glider was last flown on 25 October 1979 at Tocumwal. This exhibit is an example of a 1930s small wood and fabric glider that was designed in Austria for hill soaring. It is a simple design that became a popular choice for home building in the post war years in Australia when gliding as a sport was in recovery. Some examples are still flying.Small single seat glider. Fuselage and wing struts are painted yellow. Wings, rudder and tailplane / elevator are primed with pink dope. It has an open cockpit with small clear Perspex wind screen. Instruments include airspeed indicator and altimeter tucked neatly under front edge of the cockpit rim.australian gliding, glider, sailplane, hutter, sweetwings, fleetwings, reichelt, riley, wynne, milligan

The “Coogee” is an intermediate single seat sailplane designed and built by Tom Proctor in 1940. Only one was built. It was first flown at Stuart Hill near Bendigo Victoria in January 1941 and was maintained in flying condition until 1967. The aircraft was flown extensively by the Victorian Motorless Flight Group (now the Melbourne Gliding Club) and Geelong Gliding Club and several subsequent owners. This exhibit is a "one off" Australian designed and built glider similar in some respects to the Hutter H17. Its usage is relevant to the history of gliding in Victoria in the post war years. Also the aircraft provides an insight into gliding technology in Australia in the 1940s. Wood and fabric single seat glider sailplane with strutted wings and strutted tailplane – features metal framed perspex canopy, central fuselage skid and wheel, small tail skid, instruments include airspeed, turn and bank indicator; variometer and altimeter. Metal parts include struts and fairing covering wing joint. All surfaces are pink doped – awaiting painting.australian gliding, glider, sailplane, coogee, tom proctor, victorian motorless flight group, geelong gliding club

Items belonged to Maxwell Lennox Matheson No 418447 RAAF. Refer Cat No 1959 for his service records.Envelope containing 5 photos: .1) 1P Auro Anson T.1 - Fuselage number W2083 .2) 2P Laverton RAAF Base B&W c.1938 Bunch of Airmen marching past Hawker demons .3) 3P North American b&w RAAF P51 Mustang Number A68-585 .4) 4P Airspeed 'Oxford' b&w Fuselage Number V3354 .5) 5P Blue print 'Wirraway' Fighter/Bomber.1) 3 Lines description on rear. RAF Aircraft issued to RAF .2) Laverton RAAF Base C1938 & 2 lines about Hawker Demons & Auro Ansons .3) 5 lines about history of P51 & No 84 Sqn 1945 .4) Rear inscription 4 historical lines about AIirspeed Oxfords .5) Front inscription on blue print: Wirraway' as a General Purpose Trainer Aircraft No A70-98 Wirraway' as a Dive Bomber Aircraft No A20-754photography -photographs, raaf