Bill Oakley was an engineer at the Shire of Eltham. Viewed from west looking east. Road had more zigs and zags in those days on the west side. Russell Yeoman's FC Holden visible at bottom of hill. Digital file only; created from original colour positive slide transparencyresearch (vic.), russell yeoman collection, gumtree road, army reserve engineers, captain bill oakley, fc holden sedan, fire access, streets

Bill Oakley was an engineer at the Shire of Eltham. Bill Oakley indicating the rough span of the proposed bridge. Digital file only; created from original colour positive slide transparencyresearch (vic.), russell yeoman collection, gumtree road, army reserve engineers, captain bill oakley, fc holden sedan, fire access, streets, bill oakley

Bill Oakley was an engineer at the Shire of Eltham. Digital file only; created from original colour positive slide transparencyresearch (vic.), russell yeoman collection, gumtree road, army reserve engineers, captain bill oakley, fc holden sedan, fire access, streets, bill oakley

Bill Oakley was an engineer at the Shire of Eltham. Digital file only; created from original colour positive slide transparencyresearch (vic.), russell yeoman collection, gumtree road, army reserve engineers, captain bill oakley, fc holden sedan, fire access, streets, bill oakley

Bill Oakley was an engineer at the Shire of Eltham. Digital file only; created from original colour positive slide transparencyresearch (vic.), russell yeoman collection, gumtree road, army reserve engineers, captain bill oakley, fc holden sedan, fire access, streets, bill oakley

Bill Oakley was an engineer at the Shire of Eltham. Digital file only; created from original colour positive slide transparencyresearch (vic.), russell yeoman collection, gumtree road, army reserve engineers, captain bill oakley, fc holden sedan, fire access, streets, bill oakley

Bill Oakley was an engineer at the Shire of Eltham. Digital file only; created from original colour positive slide transparencyresearch (vic.), russell yeoman collection, gumtree road, army reserve engineers, captain bill oakley, fc holden sedan, fire access, streets, bill oakley

The Royal Corps of Australian Electrical and Mechanical Engineers (RAEME; pronounced Raymee) is a corps of the Australian Army that has responsibility for the maintenance and recovery of all land electrical and mechanical equipment. RAEME has members from both the Australian Regular Army and The Army Reserve. Prior to being given the title of 'Royal', the Australian Electrical and Mechanical Engineers (AEME) were raised on 1 December 1942. Some 64 years later, on 1 December 2006, the last independent RAEME Workshop was disbanded. RAEME soldiers continue in their role to provide support through attachment to other units in Tech Support Troops, Sections or Platoons.Wooden Plaque 15cm x 13cm with insignia of Royal Australian Electrical and Mechanical Engineers Royal Australian Electrical and Mechanical Engineers

Sapper Darren Smith was born in Adelaide, South Australia in November 1984. Darren enlisted into the Australian Army Reserve in November 2001 and subsequently transferred to the Australian Regular Army in October 2004. After five years service in the Royal Australian Engineers, Darren deployed to Afghanistan in March 2010 while posted to the 2nd Combat Engineer Regiment. Darren was involved in a route clearance task ahead of an Australian patrol in the Mirabad Valley on 7th June 2010. He and his Explosive Detection Dog ‘Herbie’, a 3-1/2 year old Collie Cross. were inspecting a suspected improvised explosive device when it was detonated by insurgents. Darren and Herbie were both Killed In Action by the blast.Sapper Darren SMITH and Army explosive detection dog "Herbie" were killed in action in Afghanistan in 2010.Brown timber frame containing reproduced photograph of armed soldier and dogSapper Darren Smith with (E.D.) Dog "Herbie" KIA Afghanistan 7.6.2010 darren smith, afghanistan, "herbie", australian army

The 1st Royal Australian Naval Bridging Train (1st RANBT) was formed in Melbourne on 28 February 1915 and was intended to be a horse drawn engineering unit attached to the Royal Naval Division (RND), then serving as infantry on the Western Front. The term ‘train’, in its title, was a direct reference to the horse drawn wagons that would, in theory, form and move ‘in train’ to carry the unit’s heavy lumber, building materials and engineering equipment to the front. The unit was manned by members of the Royal Australian Naval Reserve for whom there were no available billets in seagoing RAN ships. Many of the sailors serving in the 1st RANBT were rated ‘drivers’, and again, this refers to wagon drivers as opposed to motor vehicle drivers. Other seamen were rated as ‘artificers’ or ‘sappers’, the latter being a military term traditionally used to describe army engineers. Appointed in command of the 1st RANBT was Lieutenant Commander Leighton Seymour Bracegirdle, RAN. Bracegirdle was ideally suited to command the unit, having seen active service with the NSW Naval Brigade during the Boxer Rebellion in China as well as serving as a military officer in the South African Irregular Horse during the Boer War in 1901. He had also recently returned from German New Guinea where he had served as a staff officer in the joint Australian Naval and Military Expeditionary Force (ANMEF) responsible for the capture of the German colonies in the Pacific in September 1914. Three hundred naval reservists, including 50 men who had recently served in New Guinea, were selected for the 1st RANBT and they began their training in horsemanship, engineering and pontoon bridging at the Domain in Melbourne. By late May 1915 a decision was made to send the unit to Britain to complete its training and then to join the RND on the Western Front. The plan, however, never eventuated. The complaints about the non-combatant work being done by the men had been raised in Federal Parliament and following consultation with the senior Australian officer in the Middle East, Lieutenant General Sir Harry Chauvel, a recommendation was made that the unit be disbanded and its men used as reinforcements for the AIF. Consequently, Lieutenant Commander Bracegirdle was advised that his unit was to be dispersed; its men transferring to the AIF or being returned to Australia for discharge. On 27 March 1917 the 1st RANBT was officially disbanded.Oxidised brass anchor shaped collar badge.ww1, world war 1, first world war, ranbt, ran bridging train, royal australian navy bridging train, collar badge

Issued as a uniform item post WWII until the late 1980s. It was also used parade dress until its replacement of a newly designed uniform made of polyester. This particular sample belonged to CPL K. Howe 3144504 whist in the Army Reserves 1982 to 2005The khaki battledress was standard uniform issued post world war two and used until the introduction of the polyester uniform in the late 1980s. This uniform belonged to CPL K. Howe, the donor providing good provenance. In conjunction with other items of militaria donated by the Howe family. Item can be to tell a story of multi generations of military service of the Howe familySingle breasted hip-height jacket in khaki fabric, fastened with five buttons down the centre of the chest. Two pleated breast pockets with triangular flaps fastened with two buttons. All buttons plastic and khaki green in colour. Jacket is fastened around the hips with a belt, attached on left hand side and buckled in a rectangular metal buckle on right hand side. Both left and right sleeves bear two patches, a double chevron and red rectangular patch rounded to follow the seam of the shoulder, with embroidered text. Navy lanyard looped around right shoulder, held in place by epaulet and tucked into right side pocket. Red patch reads "ROYAL AUSTRALIAN ENGINEERS" Internal left chest label reads "A.G.C.F./VIC. 1981/[broad arrow symbol]/6405.66.025.6408/SIZE OF CHEST/SIZE 99-102R/MACQUARIE 80/BATCH J/DRY CLEAN ONLY/CREASE UPPER/HALF OF/LAPELS ONLY/No. 3144504 [handwritten]/NAME/CPL K. HOWE [handwritten]"jacket, battledress jacket, battledress jacket khaki, royal engineers

This lanyard attaches under the right shoulder epoulette of a jacket issued as a Royal Australian Engineers uniform item post WWII until the late 1980s. It was also used parade dress until its replacement of a newly designed uniform made of polyester. This particular sample belonged to CPL K. Howe 3144504 whist in the Army Reserves 1982 to 2005The khaki battledress was a standard uniform issued post world war two and used until the introduction of the polyester uniform in the late 1980s. This lanyard is a component of a uniform belonging to CPL K. Howe, the donor provided good provenance, in conjunction with other items of militaria donated by the Howe family. The Uniform can tell a story of multi generations of military service of the Howe familyA length of thick, navy blue, cylindrically shaped fabric. Knotted in two locations to create two loops at either end. One loop is 270mm long when outstretched and the other is 82mm long when outstretched.royal engineers, battledress jacket, battledress jacket khaki, lanyard, royal australian engineers

Item belonged to Lieutenant Leonard V. GREAVES 310387. Blue lanyard and shoulder patches indicate GREAVES served with the Royal Australian Electrical and Mechanical Engineers (RAEME)The Royal Corps of Australian Electrical and Mechanical Engineers (RAEME) is a corps of the Australian Army that has responsibility for the maintenance and recovery of all Army electrical and mechanical equipment. RAEME has members from both the Australian Regular Army and the Army Reserve. Prior to being given the title of 'Royal', the Australian Electrical and Mechanical Engineers (AEME) were raised on 1 December 1942. Some 64 years later, on 1 December 2006, the last independent RAEME Workshop was disbanded. RAEME soldiers continue in their role to provide support through attachment to other units in Tech Support Troops, Sections or Platoons.Short jacket with shoulder epaulets made from khaki material with blue lanyardShoulder patch - Royal Australian Electrical and Mechanical Engineersraeme, battle jacket, army, lt. leonard greaves

Army mess dress is the formal military evening dress worn by Army officers and senior non-commissioned officers in their respective messes or at other formal occasions. Tailor made item belonging to Lieutenant Leonard V. GREAVES 310387. Badges attached to jacket collar indicate GREAVES served with the Royal Australian Electrical and Mechanical Engineers (RAEME). This uniform serves as an example of the military dress worn by the Royal Australian Electrical and Mechanical Engineer during the late sixties.The Royal Corps of Australian Electrical and Mechanical Engineers (RAEME) is a corps of the Australian Army that has responsibility for the maintenance and recovery of all Army electrical and mechanical equipment. RAEME has members from both the Australian Regular Army and the Army Reserve. Prior to being given the title of 'Royal', the Australian Electrical and Mechanical Engineers (AEME) were raised on 1 December 1942. Some 64 years later, on 1 December 2006, the last independent RAEME Workshop was disbanded. RAEME soldiers continue in their role to provide support through attachment to other units in Tech Support Troops, Sections or Platoons.Two piece dark blue/black material suit consisting of long pants with red stripe and jacket with metal buttons and two badges attached to collaraustralian army mess dress, raeme