Companion Heaters Pty Ltd was registered in May 1941, with headquarters at 450 Collins Street Melbourne. Using a Swedish design, this blow torch is a number 42, with a kerosene capacity of 1 pint (600ml)A rusted and blackened cylinder nine centimetres diameter, 11 centimetres high. A two centimetre diameter, nine centimetre long metal handle is attached vertically on an angle six centimetres from the cylinder at the bottom and three centimetres at the top. A four centimetre diameter, 12 centimetre long blow torch is attached to the top of the cylinder and secured with a one and a half wide metal strap. The top of the cylinder also has a two centimetre filling cap and a one and a half centimetre diameter pump which is six centimeters long. Engraved on the cylinder is- COMPANION BRAND MADE IN AUSTRALIA BY AUTHORITY OF MAX SIEVERT SWEDEN. Part of the Aileen and John Ellison Collectionblow torch, aileen and john ellison, companion brand

A blowtorch is a fuel-burning tool used for applying flame and heat to various applications, usually metalworking. Early blowlamps used liquid fuel, carried in a refillable reservoir attached to the lamp. Modern blowtorches are mostly gas-fuelled. Their fuel reservoir is disposable or refillable by exchange. The term "blowlamp" usually refers to liquid-fuelled torches still used in the UK. Liquid-fuelled torches are pressurized by a piston hand pump, while gas torches are self-pressurized by the fuel evaporation. In 1882, a new vaporizing technique was developed by C. R. Nyberg in Sweden, and the year after, the production of the Nyberg blow lamp started. It was quickly copied or licensed by many other manufacturers. The US blowlamp was independently developed with a distinctive flared base and was fuelled by gasoline, whereas the European versions used kerosene for safety and low cost.The family of Mr Howcroft were early settlers in Moorabbin ShireA brass blow-torch B.A. HJOP Co. STOCKHOLM SWEDENblowtorch, stockholm sweden, welding, moorabbin, cheltenham, bentleigh, early settlers

Black and white photo of blow torch standing on wooden box. Corrugated iron wall at back. Printed on back ' post card' On back in ball point pen ' blow torch'topic, objects, tools

Blow torch The original and genuine sievert apparatus. "Max Sievert. Stockholm"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Blow Torch, brass with insulated wound handle with small hand pump.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Pressure Pump Blow Torch: Rusty metal including a cylinder with a pressure pump on the top of one side and an attached handle at the top with a barrel sticking out at a slope. The handle extends to the side of the cylinder where a metal handle is attached. Soldering iron with a wooden handle.metal work, soldering, blowtorch, handyman's equipment, higginson family

Used by donor for soldering spouting and downpipes on his home in McDowall Street Mitcham.Round metal cylinder with handle. Smaller cylinder attached to top.trades, plumbing

This set of Stations of the Cross was created as the prayer focus for the St Martin’s in the Pines chapel by Sr Margaret Mary Batros.Core-board plaster sheet covered with card using chisels, blow torch and wood dye. catholic education, sisters of mercy

Blow lamps/ torches are a fuel-burning tool used for applying flame and heat to various applications, usually metalworking.Brass blow lamp with red wooden handle.blow torches, welding equipment

Incendiaries used for planned burning operations All kind of pyrotechnics have been developed over the years from “strike anywhere” wax vestas, safety fusees, large DAIDs, burning tyres dragged behind vehicles, humble drip torches, incendiary shotguns and mortars, flame throwers of various designs, blow torches, jellied petrol blivets wired up to electrical circuits Display table that includes various type of incendiaries including windproof matches, Fusse matches, self propelled incendiary flares, incendiary capsules, vials and balls, Delayed Action Incendiary Devices (DAIDS), Gun Operated Flares (GOF)forests commission victoria (fcv), bushfire, planned burning

Yields information about the activities inside the depot by the BTPS showing difficulties and the provision of overhead troughing.Set of 7 digital images scanned from 35mm slides of early activities at the BTPS depot c1973. .1 - Noel Forster assisting another member adjust the brakes on a bogie tram inside the depot. .2 - cleaning old paint off a bracket arm with a kerosene blow torch. .3 - repainted trolley pole base at the depot .4 - interior view after the troughing has been positioned. .5 - ditto .6 - view of the depot from the overhead truck - 26, 28 and 40, one road yet to be commenced. .7 - interior view of the depot with workers - Peter Rees, Andrew Cook and Graeme Jordantrams, tramways, btps, trackwork, depot, tramcars, overhead, tram 26, tram 27, tram 40

A number of Plumbing tools dating from 1880s-1970s and used in teaching at Collingwood Technical School then also at Preston Technical School and at Northern Metropolitan College of TAFE's Heidelberg campus. Includes: Kerosene blow torch X 2 (1930s-); Stillson Grips; Pipe Cutter; Mash hammer; Adjustable spanner X 3 different sizes; Caulking tool; 5 way tee, 2X3 way tee, 4 way tee (1930s-); Old Handmade lead traps (student work) X 2; Metal tool tray holding; Offset adjustable spud spanner; Pear shaped lead working mallet; Bossing tool for lead work (1880s-1920s); Soldering iron (1920s-); Set square; Large screwdriver; Also Plumbing texts: • Problems for elementary physics, new rev. edn., by Thomas Tasker and Alexander Boden, Science Press, Sydney, 1966. • Gasfitting. Printed and published by McCarron Bird Pty. Ltd. [Melbourne] • Trade science for plumbing apprentices, Education Dept. Victoria, 1954 • Sanitary Plumbing and water supply, Dept. of Labour • Gasfitting, produced by members of the Colonial Gas Association Limited, Gas and Fuel Corporation of Victoria, and the Technical Division of the Education Department of Victoria. Rev metric edn. 1976 • Mechanical world year book 1953, Manchester Emmott & Co., 1953 collingwood technical school, preston technical school, northern metropolitan college of tafe, plumbing tools, plumbing texts, nmit

A blowtorch or blowlamp is a fuel-burning tool used for applying flame and heat to various applications, usually metalworking. Early blowlamps used liquid fuel, carried in a refillable reservoir attached to the lamp. Modern blowtorches are mostly gas-fuelled. The blowlamp is of ancient origin and was used as a tool by gold and silversmiths. They began literally as a "blown lamp", a wick oil lamp with a mouth-blown tube alongside the flame. This type of lamp, with spirit fuel, continued to be in use for such small tasks into the late 20th century. In 1882, a new vaporizing technique was developed by Carl Richard Nyberg in Sweden, and the year after, the production of the Nyberg blow lamp started. It was quickly copied or licensed by many other manufacturers. Carl Richard Nyberg (May 28, 1858, – 1939) was the founder of Max Sievert’s Lödlampfabrik, then one of the largest industries in Sundbyberg, Sweden. After school he started working for a jeweller and later he moved to Stockholm and worked with various metalworks. 1882 and set up a workshop at Luntmakargatan in Stockholm making blowtorches. However the business didn't work well because it took too long to both manufacture and sell them. In 1886 he met Max Sievert (1849 - 1913) at a country fair and Sievert became interested in Nyberg's blowtorch and started selling it. In 1922 the company was sold to Max Sievert who continued to own it until 1964 when it was bought by Esso. The blowtorch is commonly used where a diffuse high temperature naked flame heat is required but not so hot as to cause combustion or welding: soldering, brazing, softening paint for removal, melting roof tar, or pre-heating large castings before welding such as for repairing. It is also common for use in weed control by controlled burn methods, melting snow and ice from pavements and driveways in cold climate areas, road repair crews may use a blowtorch to heat asphalt or bitumen for repairing cracks in preventive maintenance. It is also used in cooking; one common use is for the creation of the layer of hard caramelised sugar in a crème brûlée. A brass blowtorch, 'Sievert' with a wooden handleSIEVERTtools, blow torches, blow lamps, welding, brazing, jewellery, cookery, soldering, nyberg carl, sievert max, stockholm, sweden, spirit fuel, kerosene, gas fuel, moorabbin, bentleigh, cheltenham, market gardeners, pioneers, early settlers, plumbing, carpenters,

Photocopy of an article in the 'You asked us' section about 'Flanders Fields, and the man who wrote it' published in The Toronto Star 13 November 1971. The article discusses the controversy surrounding the wording of the first and penultimate lines and claims that poet John McCrae originally originally wrote 'grow' but changed it to 'blow' when asked to by the editors of 'Punch'. The photocopy of the article was supplied by Legatee Ken Rabling. Legatee Frank Doolan signed the note he wrote to accompany the photocopy and dated it 7/8/73. An item from Legatee Frank Doolan, who was on the archive committee and made attempts to collate the history of Legacy. An example of the ongoing controversy surrounding the disputed wording. The poem 'In Flanders Field' was the inspiration for the torch of the Legacy Badge with McCrae's call to the reader to take up The Torch, as the organisation did by looking after the widows and families of fallen soldiers.01302.1 Handwritten signed note in blue ball point, address stamped in black. 01302.2 Photocopy of a page from 'The Star Weekly', Toronto, Canada dated 13 November 1971.01302.1 Top right hand side 'Box 16'poem, history

A memo from Legatee Frank Doolan about the poem In Flanders Field and the discussion about the correct wording. There was some discussion about whether it was 'poppies blow' or 'poppies grow'. The article was from 'The Star Weekly' of Toronto about the John McCrae poem. The poem is significant for legacy as the final verse mentions the torch that is used in the Legacy logo. The article was part of an album of past presidents from 1965 to 1989. The folder included biographical details and obituaries, eulogies and death notices of prominent Legatees. The items have been catalogued separately.Details about the poem that inspires the torch symbol of Legacy. The information was collected to record the lives of prominent legatees in a folder.Photocopy of an article in 'The Star Weekly' of Toronto and a memo dated 7/8/1973 from Legatee Frank Doolan about the article.poems, torch