Owned and used by Mrs J. Close.This item is an example of the type of feeding bottle used for babies in the early 20th century.Small glass baby's feeding bottle. Clear glass. Bottle lies on side. Original box included.Front- "The International Feeding Bottle". Trade Markbottle feeding-bottle glass

The "Health" Feeding BottleBaby's feeding bottle, marked for tablespoons and with a breathing hole. clear glass ovoid in shapeThe health feeding bottle moulded in the glassdomestic items, infant feeding, baby bottle, feeding bottle, glass bottle, infant bottle, milk feeding bottle

This bottle was used by Dorothy Taylor nee Rowe as a baby in 1920, who was born in Murtoa and grew up in Wal Wal.Baby Bottle made of clear glass, chilli shape, with hole on top of bottle to allow air into bottle as baby feeds.with raised descriptionTop side - "THE / "HEALTH" / FEEDING / BOTTLE" Bottom side - " TABLE-SPOONS " Has measurements 18, 16,14,12,10,8,6,4,2.baby bottle, feeding bottle, babies bottle, glass bottle, infant bottle, milk feeding bottle

Purchased from an antique shop in Willunga, South Australia by Dr Malcolm Barnett, who then donated it to the collection.Glass feeding bottle. Bulbous glass bottle with openings at either end. The upper surface is rounded, and the bottom surface is angled to allow the bottle to sit on a flat surface. The upper end has a wider neck suitable for a rubber teat, whilst the lower end is narrower and may have had a valve attachment. Graduated measurement markings for tablespoons and ounces run along each side of the bottle. Embossed writing on underside of bottle reads "REG NO/47457", and on upper side reads "THE/SITAR/FEEDER/8 OZ/OR/225 ML".'THE/SITAR/FEEDER"infant feeding, infant care

Castor oil is a vegetable oil obtained by pressing the seeds of the castor oil plant and is an age-old remedy that has been in and out of the spotlight for thousands of years. Castor oil has had many varied uses including as a medicine.Mothers used to feed it to their children as a relief for tummy aches. When taken orally, castor oil was reported helped ease the pain of constipation and mild diarrhea.This item reflects an era when almost every home had a bottle of castor oil in the medicine cabinet.Tall blue castor oil bottle still with black and white label and screw top metal lid. Half full. On the label are dosage instructions and contents.Front- label "Iona Products Co Pty Ltd Melb" Under - 227bottle glass container castor-oil medical

This bottle was probably used for feeding a baby with a milk preparation but no other information is available. This bottle is retained as an example of the type of bottle used for feeding a baby some decades past. It has no known local provenance. This is a clear glass bottle with no stopper. It has ten markings on the side for measuring purposes. It has some markings on the base but they are not clear. ‘222’ ‘L918’ ‘M (?) 2’ infant welfare, history of warrnambool

This baby’s feeding bottle was made by Agee (Australian Glass Manufacturers) and marketed by the Crown Crystal Glass Company. It is made of pyrex which is a brand of glass first produced by Corning Inc. of America in 1908. Pyrex is a clear low-thermal-expansion borosilicate glass used for laboratory glassware and kitchenware. The use of pyrex bottles became more prevalent in Australia in the second half of the 20th century and baby’s bottles made of pyrex were popular as they were easily sterilised in the home environment. This baby’s bottle has no known local provenance but it is retained because it is a good example of the advancement in infant health and welfare over the past 80 years. This is a baby’s feeding bottle made of glass (pyrex). The body of the bottle is hexagonal-shaped (circular with rounded edges). It has a circular-shaped neck and an open top with a moulded glass around it. The bottle has no feeding nipple or stopper. There are measurement marks on the side of the bottle up to 8 ounces. ‘The Ideal Agee Pyrex Feeder’ ‘AGM 1S 1561 6’ infant welfare, history of warrnambool

This baby’s feeding bottle was made by Agee (Australian Glass Manufacturers) and marketed by the Crown Crystal Glass Company. It is made of pyrex which is a brand of glass first produced by Corning Inc. of America in 1908. Pyrex is a clear low-thermal-expansion borosilicate glass used for laboratory glassware and kitchenware. The use of pyrex bottles became more prevalent in Australia in the second half of the 20th century and baby’s bottles made of pyrex were popular as they were easily sterilised in the home environment. This baby’s bottle has no known local provenance but it is retained because it is a good example of the advancement in infant health and welfare over the past 80 years. This is a baby’s feeding bottle made of glass (pyrex). The body of the bottle is hexagonal-shaped (circular with rounded edges). It has a circular-shaped neck and an open top with a moulded glass around it. The bottle has no feeding nipple or stopper. There are measurement marks on the side of the bottle up to 8 ounces.‘The Ideal Agee Pyrex Feeder’ ‘AGM 1S 1561 6’ infant welfare, history of warrnambool

This is a baby’s feeding bottle. No information has been found on ‘The Challenge’ brand. It is an interesting design. This bottle has no known local provenance but is retained as an interesting example of an early 20th century item. It will be useful for display. This is a clear glass bottle designed to lie on its side. One side of the bottle has been flattened to give it a boat shape. The neck and top are slightly raised when the bottle is lying on its side. The top is ridged and there is no stopper. There is embossed lettering on one side of the glass. ‘The Challenge Feeding Bottle’ infant welfare, history of warrnambool, challenger baby's bottle

"PoopCee Brand" feeding bottle. Used for feeding babies, with the addition of teats and corks. This bottle is a 'banana' shape.Babies' glass feeding bottle "Banana style""Poop Cee" brand moulded in clear glassbaby feeding bottle, poopcee

Circular glass bottle with embossed words - "The Victoria Feeder Baby Feeding Bottle"Front: The Victoria Feeder/F G & Co/Mbaby, babies, feeding, bottle

Alfred R Varcoe was a dairyman with stables, cart shed and his house in Eliza Street, Black Rock, Victoria. Dairy farming was established early in the settlement of the Brighton / Moorabbin area following the Dendy's Special Survey 1841 and subsequent land sales c1850. The produce was taken to feed the population of Melbourne and local residents.A clear glass ,1 pint , milk bottle used by Black Rock Dairy, MelbourneTHIS BOTTLE CONTAINS/ MILK / BOTTLED FOR SALE BY / BLACK ROCK MODEL / DAIRY / BLACK ROCK / BOTTLE IS THE PROPERTY OF THE ABOVE / IT IS OWNED AND CANNOT BE LEGALLY USED BY OTHERS/ ONE IMPERIAL PINT on base 440market gardeners, early settlers, farmers, dairies, milk production, moorabbin shire, moorabbin, cheltenham, black rock, brighton, dairy farmers, bottles, glass manufacture, varcoe alfred r; black rock dairy, dairy farmer, dairy products sales and deliveries,

This bottle was used in the Tawonga District General Hospital which was built in the 1950's specifically for the increase in population due to the Kiewa Hydro Scheme.Baby's feeding bottle. Small clear glass bottle with heavy embossing on the side and wide lip at the opening.On side vertically: Nestle / Lactogen / Regd and opposite: at the top 'MLS with a gauge underneath from 120, 100, 50 with horizontal lines every 10 ml baby's feeding bottle, nestle, lactogen, hospital

This bottle was used in the Tawonga District General Hospital which was built in the 1950's specifically for the increase in population due to the Kiewa Hydro Scheme.Clear glass Baby's Feeding Formula bottle with a gauge on 2 faces - 1 with mls and 1 with ounces. The bottle holds 240 ml and 8 ounces. The third side also has heavy embossing as has the base. The base is rectangular with curved corners. The sides are straight with a gradual taper to a narrow neck which has a heavy lip on it (for the teat).Front: At the top 240 ml, 200, 150, 100, 50 with horizontal lines marking every 10 ml. downwards. Side: 8.7.6.5.4.3.2.1. with a horizontal line in between each number and 'ounces' along side of this gauge. Other side: 'Agee /Pyrex / Feeder' (cursive writing with word in middle printed) Base: Common Seal / IS 998 / 7baby's feeding bottle, formula bottle, hospital

This medical / hospital equipment was used in the Tawonga District General Hospital which was built in the 1950's specifically for the increase in population due to the Kiewa Hydro Scheme.Historical: Shows the development of hospital equipment. Provenance: Used in the Tawonga District General Hospital - possibly in the Maternity Ward - which was remote and therefore required good equipment. Good condition and good interpretation capacity. Clear glass bottle used for feeding baby's formula. It has a hexagonal base. The front has an embossed gauge with horizontal lines marking ounces from 8 at the top. On the opposite face is embossing and to the left of that another face also embossed. The sides are flat and straight tapering to form a round shape to a very short neck. The opening has a thick lip (for a teat).Front: '8 oz' with horizontal lines beside and between 7.6.5.4.3.2.1 Left face: 'Endura'. opposite (to front) face:' Firetex'baby's feeding bottle, baby's formula, hospital, tawonga district hospital maternity ward

Feeding Bottle, clear borosilicate glass (Pyrex) hexagonal. Embossed "Made for Maws". capacity 4 fluid ounces

Allen & Hanburys was founded in 1715 in Old Plough Court, Lombard Street, London, by Silvanus Bevan, a Welshman, apothecary, and a Quaker. Bevan and his brother, Timothy, who became his partner and later succeeded him, were known for their just dealings and the integrity and quality of their drugs. The company grew into a respected pharmaceutical center and had established a strong reputation with American doctors by the late 18th century. William Allen, FRS, also a Quaker, and well-known scientist, joined the firm in 1792 and rose quickly to become the dominant personality. His second wife was a member of the Hanbury family who had produced several learned scientists. On Allen's death, the Hanbury family assumed control of the company. The growth of the company was continuous, but it was in the second part of the 19th century that developments on a large scale took place. Factories were built at Ware, Hertfordshire, and Bethnal Green in East London. The factory at Ware specialised in infants' foods, dietetic products, medicated pastilles, malt preparations as well as galenical preparations, beginning production in 1892. The brands included Allenburys Nº1 and Nº2 foods (essentially milk foods for babies up to six months), and Allenburys Nº 3 (malted farinaceous food, six months and older). Allenburys Rusks was a suitable first solid food for infants. Allenburys claimed to be pioneers in Great Britain in the production of pastilles, and thus the Ware factory also produced Allenburys Glycerine and Black Currant Pastilles, amongst another 80 different kinds of medicated and crystallised pastilles. Allen and Hanburys were one of the first manufacturers of cod liver oil in Great Britain, and owned factories in the Lofoten Islands (Norway) as well as at Hull and Aberdeen taking cod directly from the North Sea. The Bethnal Green factory carried much of the administrative and scientific side of the business, which included research, analytical control, chemistry, pharmacy, and pharmacology. In this plant, galenical preparations, pills, tablets, capsules, and other classes of pharmaceutical and medical goods were prepared. The company had overseas branches in Lindsay, Ontario, Durban, India, Shanghai, Australia, and Buenos Aires, and agencies in many other countries. The company address was for many years at 37 Lombard Street, London EC. Allen and Hanburys Ltd were absorbed by Glaxo Laboratories in 1958 under the name Glaxo Smith Kline, the company, used the Allen and Hanburys name for the specialist respiratory division until it was phased out in 2013.An early baby feeding bottle was made by the Allen & Hanburys company between 1891 to around 1920. The item is significant as it was used to feed babies the new manufactured baby milk formula's made by Allen & Hanburys that were gaining in popularity towards the end of the Victorian era.Baby feeding bottle clear glass curved with flat bottom and measuring scale, teat opening at one end and filling hole without stopper at the other end.Allenburys Feeder AD 1715warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, baby feeding bottle, bottle, domestic object

A baby bottle is a bottle with a rubber or latex teat attached so that baby can drink directly from it by sucking on the teat. It is typically used by infants and young children ,when a mother does not breastfeed, to feed infant formula, expressed breast milk or paediatric electrolyte solution. Australian Glass Manufacturers produced glass bottles for pharmacy, brewery, dairy and domestic use 1913 – 1970 . Melbourne Glass Bottle Works Co Pty Ltd Registered in Victoria in 1903 amalgamated with the Waterloo Glass Bottle Works Ltd in 1915 to form Australian Glass Manufacturers Company, Limited. .Melbourne Glass Bottle Works Spotswood 1872- 1970 comprising a complex of buildings constructed between 1880 and 1940, (at Booker Street, Douglas Parade, 2-38 Hudson Road, Raleigh Street and Simcock Avenue, Spotswood ) originally made bottles for druggists Felton Grimwade before it was sold to the State Government by US multinational, OI glass manufacturers. . The Baby feeding bottle has graduated markings in 1- 6 ounces which shows that it was made prior to the introduction of Decimal Currency in Australia 14/2/1966. A clear glass feeding bottle. It is 'banana shaped' and open both ends with graduated measurements - 1-6 ouncesAGEE/ THE PERFECT FEEDING BOTTLE / OUNCES 1-6* bottles, feeding bottles, infants, breastfeeding, moorabbin, bentleigh, ormond cheltenham, glass, australian glass manufacturing company ltd, decimal currency, imperial measurements, ounces, milk, dairy, baby formulae,

Part of Frank Forster's baby feeding bottle collection. In Australia, this type of bottle was known as "Truflow"; and was manufactured by Johnson & Johnson. The missing 'c' on this bottle makes this bottle rare and of greater value than similar ones with the correct spelling. (Verbal communication: Helen Johnson) In Australia this type of bottle was known as "Truflow" which was also manufactured by Johnson & Johnson.Broadly cylindrical glass bottle, but flattened to create six sides. Graduations in ounces and cubic centimetres written on two sides. With cream coloured plastic top. The first 'c' in cubic is missing in the text on the bottle. Bottle carries the text "evenflo", "MADE IN U.S.A", "BOTTLE CONFIG. R". Text on base reads "FF (in circle) 18"infant feeding, dr frank forster

The neck of this bottle is quite wide and would have been fitted with quite a large teat. The use of an inbuilt thermometer on this bottle by the manufacturers, Kuwa, was quite innovative.Cylindrical glass feeding bottle, with calibrations for 1 to 8 (ounces) and 50 to 200 (mls). There is a vertical recess in centre front of the bottle, which contains a thermometer. There are two vertical seams in the glass, and a longitudinal bubble in the glass near the neck. Embossed on the neck of the bottle: "Kuwa" and "Made in Germany" on the lower front of bottle near the base."KUWA"; "MADE IN GERMANY"infant feeding

Maws were a well known British medical instrument and supply manufacturer. Originating as J and S Maw in 1828, the company changed names a number of times and was renamed Maws Pharmacy Supplies Limited in 1940. It continued trading as such until the company was sold to an American company (ITT) in 1973. Clear glass feeding bottle with four rounded edges, tapering to s short neck. Calibrations for ounces and mls imprinted on opposite sides of the bottle. Bottle in inscribed "MAWS" and "HEAT RESISTING". On base, "MADE IN BELGIUM".infant feeding, infant care

This design was modelled on Queen Victoria's nursery bottles and would have been in use during mid 1880s to the early 1900s. This item is very similar to the Alexandra Feeding Bottle featured in the Maws catalogue of 1868. It was named after the then Princess Alexandra of Wales, later Queen Alexandra. This model had a glass stopper and a long rubber tube which connected at one end to a teat and to a glass tube at the other. The fittings were very difficult to clean and would hold milk particles, making them a breeding ground for the formation of bacteria. Sterilisation of feeding bottles by boiling, and boiling of milk and water, were not practiced effectively at this time.Globular shaped feeding bottle embossed with a crown on the upper surface. Next of bottle fitted with a glass thread. Writing imprinted on front of bottle, inside a ring, reads "THE VICTORIA FEEDING BOTTLE". The bottle has a flat shaped bottom to allow it to balance on a surface while being used."THE VICTORIA FEEDING BOTTLE"infant feeding, infant care

Crown Crystal Glass were an Australian glass manufacturer, who were the Australian vendors for Pyrex from 1926, importing from the UK. In 1961, Crown Crystal Glass began manufacturing their own Pyrex, under the name Agee Pyrex (until 1963), Crown Agee Pyrex (late 1960s), Crown Pyrex (1970s), Crown Ovenware (1970s) and Pyrex Ovenware (late 1970s until early 1980s). Source: That Retro Piece, 'PYREX | Australian', https://thatretropiece.com/collections/pyrex-australian "The use of pyrex bottles became more prevalent in Australia in the second half of the 20th century and baby’s bottles made of pyrex were popular as they were easily sterilised in the home environment." Source: Warrnambool and District Historical Society Inc., 'Bottle, The Perfect Agee Feeding Bottle, Mid 20th century', https://victoriancollections.net.au/items/592fe71ad0cdd520341b3954Octagonal glass bottle tapering to a narrow neck. Calibrations for ounces and mls imprinted on the sides of the bottle. Text inscribed on bottle reads " THE IDEAL AGEE/PYREX/FEEDER"."THE IDEAL AGEE/PYREX/FEEDER"infant feeding, infant care

Small feeding bottles were used to feed milk to newborns or juice to older infants. Crown Crystal Glass were an Australian glass manufacturer, who were the Australian vendors for Pyrex from 1926, importing from the UK. In 1961, Crown Crystal Glass began manufacturing their own Pyrex, under the name Agee Pyrex (until 1963), Crown Agee Pyrex (late 1960s), Crown Pyrex (1970s), Crown Ovenware (1970s) and Pyrex Ovenware (late 1970s until early 1980s). Source: That Retro Piece, 'PYREX | Australian', https://thatretropiece.com/collections/pyrex-australian "The use of pyrex bottles became more prevalent in Australia in the second half of the 20th century and baby’s bottles made of pyrex were popular as they were easily sterilised in the home environment." Source: Warrnambool and District Historical Society Inc., 'Bottle, The Perfect Agee Feeding Bottle, Mid 20th century', https://victoriancollections.net.au/items/592fe71ad0cdd520341b3954Small clear glass bottle with a short narrow neck. Imprinted with calibrations for ounces (0-4) and millilitres (0-120). Embossed on side of bottle: "Agee/ PYREX/ Feeder".infant feeding, infant care

Crown Crystal Glass were an Australian glass manufacturer, who were the Australian vendors for Pyrex from 1926, importing from the UK. In 1961, Crown Crystal Glass began manufacturing their own Pyrex, under the name Agee Pyrex (until 1963), Crown Agee Pyrex (late 1960s), Crown Pyrex (1970s), Crown Ovenware (1970s) and Pyrex Ovenware (late 1970s until early 1980s). Source: That Retro Piece, 'PYREX | Australian', https://thatretropiece.com/collections/pyrex-australian "The use of pyrex bottles became more prevalent in Australia in the second half of the 20th century and baby’s bottles made of pyrex were popular as they were easily sterilised in the home environment." Source: Warrnambool and District Historical Society Inc., 'Bottle, The Perfect Agee Feeding Bottle, Mid 20th century', https://victoriancollections.net.au/items/592fe71ad0cdd520341b3954 Clear glass bottle tapering to a short narrow neck. Calibrations embossed on the glass in ounces (0-8) and mls (0-240). Embossed on the side: "Agee/PYREX/Feeder"."Agee/PYREX/Feeder"infant feeding, infant care

These bottles were used in hospital maternity wards to relieve baby's thirst, particularly in the immediate postpartum before the mother's milk came in.Small clear glass bottle tapering to a wide neck with a thread for a screw top. Metal screw top lid. Calibrations embossed on glass in millilitres (0-120). Embossed on front of bottle: 'Nestle'. Printing on paper label adhered to bottle reads 'Sterile Feeding/Water/Name/Ward'.infant feeding, infant care

This style of milk bottle began to appear in Australia in the 1930s. The number stamped on the base indicated the dairy to which the bottle belonged. Nursery milk had a higher guaranteed fat content than ordinary milk. Lady Talbot, the wife of a Victorian Governor, was associated with the movement that was to become the Free Kindergarten Union in 1908. The Talbot Milk Institute was associated with the Union. It provided free uncontaminated milk to needy families, since many infant deaths and illnesses were traceable to unsuitable or adulterated food. A wide necked milk bottle made of clear glass. Embossed in an arc on the front of the bottle: 'Lady Talbot Milk Supply Co. Specially supervised nursery milk.' Also embossed on base: '62'.infant feeding

Purchased from an Antique shop in Willunga, South Australia by Dr Malcolm Barnett, who then donated it to the collection.Glass feeding bottle. Bottle is loosely banana shaped, with a wider section in the middle narrowing to a neck at either end. The bottle has a flat base and is embossed with the word "Liptight" at top."LIPTIGHT"infant feeding, infant care

Prue Forster believes this to be the bottle given to her by 'Auntie' Maud Pepper, for Frank Forster's collection. Prue met her when she was working for the Aboriginal Health Service (1980-1993). 'Auntie' Maud Pepper was living in Preston at the time but had come from the Western District. The bottle was her own and she told Prue how fine material was used over the mouthpiece instead of a rubber teat. 'Auntie' Maud Pepper was a founder of ACES (the Aboriginal Elders Residence & Convalescent Home.) Additional sensitive notes on file.Glass boat-shaped feeding bottle with one end flattened and a spout at the other. There is a larger opening with a lip on the top surface. There is a small chip on the flattened end.infant feeding, infant care

Bulbous clear glass bottle with necks/openings at either end. Embossed lettering reading "The/STAR/Feeder" on the front/top of bottle. Underside of the bottle is flat to allow for the bottle to sit on a flat surface. "HOWRAH" embossed on underside.The/STAR/Feeder; HOWRAHinfant care