Showing 88 items matching "buildings -- specifications"
-
RMIT GSBL Justice Smith CollectionBook, Duncan Wallace, I.N, Construction contracts: principles and policies in Tort and contract, 1986
... buildings -- specifications...H. Smith buildings -- specifications buildings -- specifications -- great britain ISBN: 042134900X Construction contracts: principles and policies in Tort and contract Book Duncan Wallace, I.N Sweet & Maxwell Limited ...Previous owner: T. H. SmithISBN: 042134900Xbuildings -- specifications, buildings -- specifications -- great britain -
Flagstaff Hill Maritime Museum and VillageDocument - Building Specifications, Bank of Australasia, Specifications Bank of Australasia Warrnambool, before March 18, 1860
... These specifications were for the Bank of Australasia building on the corner of Timor and Kepler Streets in Warrnambool. ...Building Specifications; five large cream-coloured pages, folded in half to make a book. ...The document with the building specifications for the Bank of Australasia, Warrnambool has historical significance as it was the basis for the building housing the Bank from early 1860. ...These specifications were for the Bank of Australasia building on the corner of Timor and Kepler Streets in Warrnambool. The two-storey stone Regency building was built by Roberts & Co. in 1859 and it still stands today, a hundred and sixty years later. Above the doorway, the words "BANK OF AUSTRALASIA" were etched into the stone. In 1856 Roberts & Co. built the Warrnambool Post Office on Timor Street, and in 1858 purchased land on Timor Street. The Bank of Australasia was incorporated by the Royal Charter of England in March 1834. The bank began in Australia on 14th December 1835, opening in Sydney. The Acting Superintendent of the bank at that time was David Charters McArthur. He was Superintendent from 1867-to 1876. The Melbourne branch opened on 28th August 1838 in a two-roomed brick cottage on the north side of Little Collins Street, where two huge mastiff dogs were used at night to guard the bank. The government also provided an armed military sentinel. Due to the bank's rapid growth, a new building for the Melbourne branch was opened in 1840 at 75 Collins Street West. By 1879 the bank had been upgraded to a magnificent two-storey building on the corners of Collins and Queens Streets, with the entry on Collins Street. In 1951 the Bank of Australasia amalgamated with the Union Bank to form Australia and New Zealand Bank, now known as the ANZ. Then in 1970, the ANZ merged with both the ES&A and the London Bank of Australia to form the ANZ Banking Group Limited. The ANZ Banking Group Ltd kindly donated a variety of historic items from the Bank of Australasia. BANK of AUSTRALASIA, WARRNAMBOOL – In 1854 Warrnambool had two banks, the Union Bank and the Bank of Australasia. Later, completely different bank businesses opened; in 1867 the National Bank of Australasia, then in 1875 the Colonial Bank of Australasia. The original Warrnambool branch of the Bank of Australasia was established in July 1854, and operated from a leased cottage on Merri Street, close to Liebig Street. The bank later bought a stone building previously erected by drapers Cramond & Dickson on the corner of Timor and Gibson Streets. Samuel Hannaford was a teller and then Manager at the Warrnambool branch from 1855 to 1856 and the Warrnambool Council chose that bank for its dealings during 1856-57. In 1859 Roberts & Co. was awarded the contract to build the new Bank of Australasia branch for the sum of £3,000. The land was on a sand hill on the northeast corner of Timor and Kepler Streets and had been bought in 1855 from investor James Cust. The new building opened on May 21, 1860. The bank continued to operate there until 1951 when it merged with the Union Bank to form the ANZ Bank, which continued operating from its Liebig Street building. Warrnambool City Council purchased the former Bank of Australasia building in 1971 and renovated it, then on 3rd December 1973 it was officially opened as the Art Gallery by Cr. Harold Stephenson and Gallery Director John Welsh. The Gallery transferred to the purpose-built building in Liebig Street in 1986 and the old bank building is now the Gallery club. Staff at the Bank of Australasia in Warrnambool included the following men but others were also involved: Samuel Hannaford, Teller then Manager from 1855-1856; W H Palmer, Manager from January 1857 until November 1869 when the Teller Basil Spence was promoted to Manager; H B Chomley, Manager from April 1873 and still there in 1886; A Butt, Manager in 1895-1904; J R McCleary Accountant and Acting Manager for 12 months, until 1900; A Kirk, Manager 1904; J Moore, staff until his transfer to Bendigo in December 1908; J S Bath was Manager until 1915; C C Cox, Manager until April 1923; Richard C Stanley, Manager 1923 to April 1928. The document with the building specifications for the Bank of Australasia, Warrnambool has historical significance as it was the basis for the building housing the Bank from early 1860. The document is also a historical record of the specifications and the builders of the mid-1800s in Warrnambool. The document is also significant for its association with Roberts & Co. which also built the Warrnambool Post Office. The document is significant for its association with the Bank of Australasia in Warrnambool, the first bank in Warrnambool, established in 1854. The bank continued to operate until its merger in 1951 when it became the ANZ Bank, which is still in operation today. The Bank was an integral part of the establishment and growth of commerce in Colonial Warrnambool and throughout Australia.Building Specifications; five large cream-coloured pages, folded in half to make a book. Handwritten text in black ink. Rectangular paper sheets were folded in half parallel to the short sides then stapled together near the fold A remnant of green tape suggests it was used to seal the binding. The specifications relate to the Bank of Australasia's Timor Street branch in Warrnambool, 1860.Handwritten in pencil on front cover "Completion date 18th March 1860" "Cost £2,860 sterling" Script handwriting, black ink on cover "Specifications / Bank of Australasia / Warrnambool"flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, commerce, banking, bank of australasia, australia & new zealand bank, anz bank, david charters mcarthur, 1860, regency building, specifications, bank building, roberts & co. -
Clunes MuseumPhotograph
... COPY OF SPECIFICATIONS FOR BUILDING OF NEW CHURCH....Clunes Museum 36 Fraser Street enter building through Collins Place Clunes goldfields EARLY PHOTO SHOWS STEEPLE UNDER CONSTRUCTION 1910 LATER PHOTO STEEPLE COMPLETED -1922 LOCAL HISTORY PHOTOGRAPHYS & DOCUMENTS CHURCHES PRESBYTERIAN. 4 x COPIES OF PHOTOGRAPHS OF OLD AND NEW COGHILLS CREEK PRESBYTRIAN CHURCHES. NEW CHURCH UNDER CONSTRUCTION. COPY OF OUTLINE HISTORY OF THE PRESBYTERIAN CHURCHES OF CLUNES & COGHILLS CREEK. COPY OF SPECIFICATIONS ...EARLY PHOTO SHOWS STEEPLE UNDER CONSTRUCTION 1910 LATER PHOTO STEEPLE COMPLETED -19224 x COPIES OF PHOTOGRAPHS OF OLD AND NEW COGHILLS CREEK PRESBYTRIAN CHURCHES. NEW CHURCH UNDER CONSTRUCTION. COPY OF OUTLINE HISTORY OF THE PRESBYTERIAN CHURCHES OF CLUNES & COGHILLS CREEK. COPY OF SPECIFICATIONS FOR BUILDING OF NEW CHURCH.local history, photographys & documents, churches, presbyterian. -
Ballarat Tramway MuseumDocument - Personal Papers, Warren Doubleday, "Depot Extensions", "First Report of the Expert Panel on Tramway Museum Safety Standards to the Chairman and Members of the Council of Tramway Museums of Australasia", mid 1970's
... Set of personal papers of Warren Doubleday concerning the extension of the original depot of the BTPS in the mid 1970s' Includes drawings, sketches, Letters In and Out, Specifications, calculations, Building Permit and General Papers. ...Ballarat Tramway Museum South Gardens Reserve Wendouree Parade Ballarat Ballarat goldfields Yields information about the design and construction of the depot extensions for the BTPS in the mid 1970's and has a strong association with Warren Doubleday Trams tramways BTPS Depot Extensions COTMA Safety Set of personal papers of Warren Doubleday concerning the extension of the original depot of the BTPS in the mid 1970s' Includes drawings, sketches, Letters In and Out, Specifications, calculations, Building Permit and General Papers. ...Yields information about the design and construction of the depot extensions for the BTPS in the mid 1970's and has a strong association with Warren DoubledaySet of personal papers of Warren Doubleday concerning the extension of the original depot of the BTPS in the mid 1970s' Includes drawings, sketches, Letters In and Out, Specifications, calculations, Building Permit and General Papers. This includes plans of Bungaree, list of drawings held by Bill Kingsley at the time, and a report dated 25/4/1977 titled "First Report of the Expert Panel on Tramway Museum Safety Standards to the Chairman and Members of the Council of Tramway Museums of Australasia".trams, tramways, btps, depot extensions, cotma, safety -
University of Melbourne, Burnley Campus ArchivesAdministrative record, Andrew Smith et al, University of Melbourne Institute of Land and Food Resources Burnley Campus Gardens Staffing 2003-04, 2003-2005
... Gardens had been maintained by Faculty since Heritage listing and Conservation Management Plan now inappropriate and needs to become a responsibility of Property & Buildings Department. 2. Draft Specifications for the maintenance of Burnley Gardens. 3. ...Gardens had been maintained by Faculty since Heritage listing and Conservation Management Plan now inappropriate and needs to become a responsibility of Property & Buildings Department. 2. Draft Specifications for the maintenance of Burnley Gardens. 3. ...mainrenance, garden maintenance, property & buildings, staff descriptions, transition -
Warrnambool and District Historical Society Inc.Document - Victorian Railways. Koroit & Warrnambool Line. Contract No. 2937, Circa 1888
... The building of the railway to Warrnambool and onward to Koroit was a significant event for the town. warrnambool railways warrnambool to koroit railway victorian railways contract no 2937 Handwritten on front cover and inside front cover ” Copy for Engr in Chief” .On Page 2 transferred to Allan Reid * 24/1/88 Co Briscoe & Co Little Collins Street, Melbourne. Green cloth cover with tan suede corner points and spine. Title printed in gold on front cover. Title printed in gold on red on spine. 92 pages. The contract is printed and includes handwritten entries with specifications ...The Victorian Railways began in 1854 and in the first 14 years up to 1868 had managed to complete about 250 miles of track. The next 60 years saw the system expand to nearly 3000 miles. By 1931 every town with a population over 500 had its own railway station. Early Victorian railway maps indicate that the extension from Colac to Warrnambool and then onwards to Koroit, occurred in the period of the 1880’s when the act known as the Octopus act saw a rapid expansion of lines. At the time there was much debate over where the expansion of the lines should take place, with one of the prime considerations for Warrnambool was the impact it would have on its port.The building of the railway to Warrnambool and onward to Koroit was a significant event for the town. Green cloth cover with tan suede corner points and spine. Title printed in gold on front cover. Title printed in gold on red on spine. 92 pages. The contract is printed and includes handwritten entries with specifications.Handwritten on front cover and inside front cover ” Copy for Engr in Chief” .On Page 2 transferred to Allan Reid * 24/1/88 Co Briscoe & Co Little Collins Street, Melbourne.warrnambool, railways, warrnambool to koroit railway, victorian railways contract no 2937 -
Bendigo Military MuseumPhotograph - Lithographic Squadron Personnel and Equipment, Army Survey Regiment, Fortuna, Bendigo, Lithographic Squadron Personnel and Equipment, Army Survey Regiment, Fortuna, Bendigo, 1990
... Specifications: Beseler Model 4SAF Autofocus Enlarger. Negative size: 16mm to 4x5. Focusing: Autofocusing by parallelogram, wheel and cam system. Light source: 150-watt opal lamp. Construction: Steel and extruded aluminum with pyramid structure and obelisk frame. Other features: Single set of condensers for all lenses, concealed counterbalance for crank-controlled up and down movement, horizontal projection, glassless negative carriers and wheel-mounted variable contrast paper filters. Fire pump testing shown in photos .12P & .13P was performed on a regular basis by the unit firefighting team. The building...Specifications: Beseler Model 4SAF Autofocus Enlarger. Negative size: 16mm to 4x5. Focusing: Autofocusing by parallelogram, wheel and cam system. Light source: 150-watt opal lamp. Construction: Steel and extruded aluminum with pyramid structure and obelisk frame. Other features: Single set of condensers for all lenses, concealed counterbalance for crank-controlled up and down movement, horizontal projection, glassless negative carriers and wheel-mounted variable contrast paper filters. Fire pump testing shown in photos .12P & .13P was performed on a regular basis by the unit firefighting team. The building ...This is a set of 13 photographs of Lithographic personnel and equipment taken at the Army Survey Regiment, Fortuna, Bendigo in 1990. Photos .1P to .3P feature the Beseler Model 4SAF Autofocus Enlarger and accessories. This enlarger was used to enlarge photographic media from the late 1950s. The following description written by Myron Matzkin appeared in the now-defunct Modern Photography magazine in April 1959: Specifications: Beseler Model 4SAF Autofocus Enlarger. Negative size: 16mm to 4x5. Focusing: Autofocusing by parallelogram, wheel and cam system. Light source: 150-watt opal lamp. Construction: Steel and extruded aluminum with pyramid structure and obelisk frame. Other features: Single set of condensers for all lenses, concealed counterbalance for crank-controlled up and down movement, horizontal projection, glassless negative carriers and wheel-mounted variable contrast paper filters. Fire pump testing shown in photos .12P & .13P was performed on a regular basis by the unit firefighting team. The building under construction in photo .11P was built with climate controls to house a map library and digital data media building. All geodetic and survey records previously located at the Field Survey Squadrons and Survey Directorate were centralised at the Army Svy Regt in 1992. More information on the centralisation of RA Svy records is provided in page 157 of Valerie Lovejoy’s book 'Mapmakers of Fortuna – A history of the Army Survey Regiment’ ISBN: 0-646-42120-4. This is a set of 13 photographs of Lithographic Squadron personnel and equipment taken at the Army Survey Regiment, Fortuna, Bendigo in 1990. The photographs are on 35mm negative film and were scanned at 2400 dpi. They are part of the Army Survey Regiment’s Collection. .1) & .2) - Photo, black & white, 1990. Beseler Model 4SAF Autofocus Enlarger. .3) - Photo, black & white, 1990. Beseler Model 4SAF Autofocus Enlarger accessories. .4) - Photo, black & white, 1990. Photo Troop’s SPR Scott Cameron retouches a film negative. .5) - Photo, black & white, 1990. Print Troop’s SPR Syd Anstee. .6) - Photo, black & white, 1990. Photo Troop’s SPR Tony Purton. .7) - Photo, black & white, 1990. Photo Troop’s SPR Ivan Parsons. .8) & .9) - Photo, black & white, 1990. Photo Troop’s LCPL John Bragg. .10) - Photo, black & white, 1990. Print Troop’s SPR Ross Anza with a new haircut. .11) - Photo, black & white, 1990. Concrete floor leveling with a screed inside new Map Library building. .12) & .13) - Photo, black & white, 1990. Fire pump put to the test in Fortuna’s lake.There are no personnel identified.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, litho, litho sqn -
4th/19th Prince of Wales's Light Horse Regiment Unit History RoomRegimental Scrap Book: to 1959, 2009 (exact)
... 4th/19th Prince of Wales's Light Horse Regiment Unit History Room 4/19 PWLH Regiment, Building 78 Simpson Barracks Macleod melbourne photographs ceremonial 4 19 prince of wales s light horse regiment history training 4 19 pwlh band royal visit 1954 sir dallas brooks 4 19 pwlh badge social activities Archival quality A3 loose leaf slip case containing memorabilia documents, cuttings and photos about the Regiment for the period to 1959. Contents include: Training, social and ceremonial activities, Specification ...Archival quality A3 loose leaf slip case containing memorabilia documents, cuttings and photos about the Regiment for the period to 1959. Contents include: Training, social and ceremonial activities, Specification of Regimental badge, Honour Roll of members who have died on duty, Photos of Band 1948-49, Photos of Governor's Reception 1948, Royal Visit 1954, Royal Melbourne Show 1954, Wedding of Major and Mrs Clendinnen, Honorary Colonel Sir Dallas Brooks 1958, Documentation re transfer of Port Melbourne Municipal Band to the Regiment 19 Sep 1958, Exercise Fire Power.photographs, ceremonial, 4 19 prince of wales s light horse regiment history, training, 4 19 pwlh band, royal visit 1954, sir dallas brooks, 4 19 pwlh badge, social activities -
4th/19th Prince of Wales's Light Horse Regiment Unit History RoomBook, Philip Trewhitt: Armoured Fighting Vehicles, 300 of the world's greatest military vehicles, 2000 (exact); Reprinted 2001, 2002, 2003, 2004
... 4th/19th Prince of Wales's Light Horse Regiment Unit History Room 4/19 PWLH Regiment, Building 78 Simpson Barracks Macleod melbourne world war 1 world war 2 military history tanks armour armoured fighting vehicles wheeled infantry vehicles anti aircraft guns military vehicles philip trewhitt world war 1 world war 2 military history tanks armour armoured fighting vehicles wheeled infantry vehicles anti aircraft guns military vehicles philip trewhitt ISBN 1-84013-338-4 A compendium of of the most important and influential military vehicles that have been in service since World War 1. Each vehicle featured is illustrated by a full-colour side-profile artwork, and accompanied by a detailed specifications ...A compendium of of the most important and influential military vehicles that have been in service since World War 1. Each vehicle featured is illustrated by a full-colour side-profile artwork, and accompanied by a detailed specifications table giving country of origin, crew, weight, dimensions, armour, armament, powerplant and performance, all measurements in imperial and metric. Accompanying text for each vehicle summarises its development and service history.ISBN 1-84013-338-4world war 1, world war 2, military history, tanks, armour, armoured fighting vehicles, wheeled infantry vehicles, anti aircraft guns, military vehicles, philip trewhitt, world war 1, world war 2, military history, tanks, armour, armoured fighting vehicles, wheeled infantry vehicles, anti aircraft guns, military vehicles, philip trewhitt -
4th/19th Prince of Wales's Light Horse Regiment Unit History RoomBook, Terry Gander: Modern British Armoured Fighting Vehicles, 1986 (exact)
... 4th/19th Prince of Wales's Light Horse Regiment Unit History Room 4/19 PWLH Regiment, Building 78 Simpson Barracks Macleod melbourne photographs armour armoured fighting vehicles british army specifications terry gander photographs armour armoured fighting vehicles british army specifications terry gander ISBN 0-85059-836-2 This book gives details of armoured fighting vehicles in service with the British Army of the eighties. ...This book gives details of armoured fighting vehicles in service with the British Army of the eighties. Included are tracked and wheeled reconnaissance vehicles such as Scorpion, Scimitar and Fox, armoured personnel carriers, command, engineer and signals vehicles, bridge layers and others. Specifications and performance details are accompanied by constant-scale plans and photographs.ISBN 0-85059-836-2photographs, armour, armoured fighting vehicles, british army, specifications, terry gander, photographs, armour, armoured fighting vehicles, british army, specifications, terry gander -
4th/19th Prince of Wales's Light Horse Regiment Unit History RoomBook, An Illustrated Guide to Modern Tanks and Fighting Vehicles, 1980 (exact)
... 4th/19th Prince of Wales's Light Horse Regiment Unit History Room 4/19 PWLH Regiment, Building 78 Simpson Barracks Macleod melbourne military history tanks armour armoured fighting vehicles ray bonds combat vehicles military history tanks armour armoured fighting vehicles ray bonds combat vehicles ISBN 0 7018 1439 X Hard cover. A compact directory of major battle tanks and combat vehicles used by the world's armies. Includes photographs and specifications ...Hard cover. A compact directory of major battle tanks and combat vehicles used by the world's armies. Includes photographs and specifications.ISBN 0 7018 1439 Xmilitary history, tanks, armour, armoured fighting vehicles, ray bonds, combat vehicles, military history, tanks, armour, armoured fighting vehicles, ray bonds, combat vehicles -
4th/19th Prince of Wales's Light Horse Regiment Unit History RoomBook, An Illustrated Guide to World War II Tanks and Fighting Vehicles, 1981 (exact)
... 4th/19th Prince of Wales's Light Horse Regiment Unit History Room 4/19 PWLH Regiment, Building 78 Simpson Barracks Macleod melbourne world war 2 military history tanks armoured vehicles christopher f foss world war 2 military history tanks armoured vehicles christopher f foss ISBN 0 7018 1488 8 An illustrated directory of major battle tanks used by the world's armies in World War II. Included photographs, illustrations and specifications ...An illustrated directory of major battle tanks used by the world's armies in World War II. Included photographs, illustrations and specifications.ISBN 0 7018 1488 8world war 2, military history, tanks, armoured vehicles, christopher f foss, world war 2, military history, tanks, armoured vehicles, christopher f foss -
4th/19th Prince of Wales's Light Horse Regiment Unit History RoomSpecifications, Specifications Army (Aust) 5368 and 368, (estimated); abt 1969-1980
... 4th/19th Prince of Wales's Light Horse Regiment Unit History Room 4/19 PWLH Regiment, Building 78 Simpson Barracks Macleod melbourne insignia badges specification 5368 manufacturing drawings defence contracts Manufacturing drawings. ...Manufacturing drawings. Specifications for Australian Army metal badges and insignia in two lever arch foolscap files. The drawings are appendices to Specifications 5368 and 368 insignia, badges, specification 5368, manufacturing drawings, defence contracts -
4th/19th Prince of Wales's Light Horse Regiment Unit History RoomBooklet, Specification for Supplies. The "SX" Series. Expense Supplies, Fuel/Light and Forage 1965, 1965
... 4th/19th Prince of Wales's Light Horse Regiment Unit History Room 4/19 PWLH Regiment, Building 78 Simpson Barracks Macleod melbourne Supplies expense DSN 7610-66-010-1935 A hard covered, loose leaf book setting out the conditions of quality control for expense supplies, fuel/light and forage items Specification for Supplies. ...A hard covered, loose leaf book setting out the conditions of quality control for expense supplies, fuel/light and forage itemsDSN 7610-66-010-1935supplies, expense -
4th/19th Prince of Wales's Light Horse Regiment Unit History RoomBooklet, G S Training Publications, AFV Identification Handbook, 1967
... 4th/19th Prince of Wales's Light Horse Regiment Unit History Room 4/19 PWLH Regiment, Building 78 Simpson Barracks Macleod melbourne AFV Recognition Army Code No 70020 A soft covered loose leaf lace bound booklet showing photographs, silhouettes, recognition features, specifications and country of manufacture of principal AFV's of the major powers. ...A soft covered loose leaf lace bound booklet showing photographs, silhouettes, recognition features, specifications and country of manufacture of principal AFV's of the major powers. With amendments Nos 1 & 2.Army Code No 70020afv recognition -
Bendigo Military MuseumDocument - MONUMENT SPECIFICATIONS, C.1992
... Document 5 pages white paper black print re specifications for the building of a Monument at the Soldiers Memorial Institute Pall Mall Bendigo. ...Bendigo Military Museum 37 - 39 Pall Mall Bendigo goldfields Document relates to the building of a memorial to Ex Servicemen and Women in front of the Soldiers Memorial Institute in Pall Mall Bendigo. Refer Cat No 8245.2 brsl smirsl monument specifications Document 5 pages white paper black print re specifications for the building of a Monument at the Soldiers Memorial Institute Pall Mall Bendigo. ...Document relates to the building of a memorial to Ex Servicemen and Women in front of the Soldiers Memorial Institute in Pall Mall Bendigo. Refer Cat No 8245.2Document 5 pages white paper black print re specifications for the building of a Monument at the Soldiers Memorial Institute Pall Mall Bendigo. Sub headings in the document cover materials, workmanship, insurance, setting and works, finish and lettering. Document stapled at top LH corner.brsl, smirsl, monument, specifications -
4th/19th Prince of Wales's Light Horse Regiment Unit History RoomSpecifications, Army Insignia, Badges and Buttons, 1951 - 1980
... 4th/19th Prince of Wales's Light Horse Regiment Unit History Room 4/19 PWLH Regiment, Building 78 Simpson Barracks Macleod melbourne specifications Rubber stamp of Engineering Design Establishment giving conditions of issue to contractors Set of manufacturing specifications for Australian Army insignia, badges and buttons - on foolscap in two lever arch files Specifications include: VOLUME 1 Badges, head dress & collar, AMF Insignia, shoulder, title, AUSTRALIA Insignia, metal, AUSTRALIAN ARMY Button, insignia, AMF Badge, metal, qualification, skill-at-arms Medallion & lapel badge, ANZAC commemorative Badge, lapel, metal, Army Reserve Lapel badge, Returned from Active Service Insignia, metal, Royal Cipher, Queen Elizabeth II Badge, metal, retired officers Button, insignia, general officer Link, button Insignia, metal, rank, womens, Warrant Officer & NCO tropical Insignia, metal, rank, officer, sword & baton crossed (1975) Insignia, metal, rank, officer, sword & baton crossed (1969) Insignia, metal, rank, officers, crown Insignia, metal, rank, NCO, crown Insignia, metal, rank, Warrant Officer, crown Palm leaf device for Vietnamese Cross of Gallantry Medal, service, Vietnamese campaign Button, insignia, Corps of Staff Cadets Insignia, metal, RAAC, beret/collar Insignia, metal, 1 AR, beret/collar Insignia, metal, 1/15 RNSWL, beret/collar Insignia, metal, 2 Cav, beret/collar Insignia, metal, 2/14 QMI Insignia, metal, 3 Cav, beret/collar Insignia, metal, 3/9 SAMR Insignia, metal, 4 Cav, beret/collar 4/19 PWLH Regt badge, head dress or collar Insignia, metal, 4/19 PWLH 8/13 VMR badges, head dress or collar Insignia, 10 LH, collar, silver plated 12/16 HRL, badges, head dress or collar Insignia, metal, RAA, officers, cap/hat, collar Insignia, metal, RAA, other ranks Button, insignia, RAA Button, insignia, RAE Insignia, metal, RAE cap/hat collar Button, Insignia, Royal Aust Survey Corps Insignia, metal, Royal Aust Survey Corps Insignia, metal, Royal Aust Corps of Signals, cap/collar Button, insignia, Royal Aust Corps of Signals Button, insignia, R Aust Inf Insignia, metal, R Aust Inf, cap/hat, collar Insignia, metal, Commando Insignia, metal, RSAR, cap/hat collar Insignia, metal, RAR, cap/hat collar Insignia, metal, RNSWR Insignia, metal, RVR, cap/hat Insignia, metal, RQR ,cap/hat collar Insignia, metal, RWAR, cap/hat collar Badge, qualification, Infantry Combat Button, insignia, Chaplains, Christian Insignia, metal, Chaplains, Christian, cap/hat collar Insignia, metal, RACT Button, insignia RACT Button, insignia, RAAMC Insignia, metal, RAAMC, cap/hat collarl, Insignia, metal, RAADC, cap/hat collar Button, insignia, RAAOC Insignia, metal, RAAOC' VOLUME 2 Button, insignia, RAEME RAEME, badges, collar Insignia, metal, R Aust Army Educational Corps, cap/hat collar Button, insignia, AACC Insignia, metal, AACC, cap/hat collar Button insignia, R Aust Army Pay Corps Insignia, metal, R Aust Army Pay Corps, cap/hat collar Insignia, metal, Aust Army Legal Corps, cap/hat collar Insignia, metal, R Aust Army Provost Corps, cap/hat collar Button, insignia, R Aust Corps of MP Button, insignia, Aust Army Psych Corps Insignia, metal, Aust Army Psych Corps Button, insignia, Aust Army Nursing Corps Insignia, metal, R Aust Army Nursing Corps Button, insignia, WRAAC Insignia, metal, rank, mess undress, brooch type, RAAMC Insignia, metal, WRAAC Insignia, shoulder, Apprentice Insignia, metal, Army Apprentices School Button, insignia, OCS Button, insignia, OCS ,blazer Insignia, metal, OCS, cap/hat collar Button, insignia, RMC, blazer Insignia, metal, RMC Medallion, RMC Insignia, metal, AUR, cap/hat collar Button, insignia, MonUR Insignia, metal, MUR, cap/hat collar Button, insignia, MonUR Insignia, metal, MonUR, cap/hat collar Insignia, metal, UNSWR , cap/hat collar Insignia, metal, SUR, cap/hat collar Button, insignia, SUR Insignia, metal, QUR, cap/hat collar Button, insignia, QUR Insignia, metal, WAUR, cap/hat collar Button, insignia, WAUR Badge, metal, qualification, flying, Army pilot, Aust Army Aviation Corps Insignia, metal, Aust Army Aviation Corps Button, insignia, Aust Army Aviation Corps Badge, metal, qualification , bandsman Badge, metal, qualification, Drum Major Button, insignia, Aust Army Band Corps Insignia, metal, Aust Army Band Corps, cap/hat collar Specifications, Army Insignia, Badges and Buttons ...Set of manufacturing specifications for Australian Army insignia, badges and buttons - on foolscap in two lever arch files Specifications include: VOLUME 1 Badges, head dress & collar, AMF Insignia, shoulder, title, AUSTRALIA Insignia, metal, AUSTRALIAN ARMY Button, insignia, AMF Badge, metal, qualification, skill-at-arms Medallion & lapel badge, ANZAC commemorative Badge, lapel, metal, Army Reserve Lapel badge, Returned from Active Service Insignia, metal, Royal Cipher, Queen Elizabeth II Badge, metal, retired officers Button, insignia, general officer Link, button Insignia, metal, rank, womens, Warrant Officer & NCO tropical Insignia, metal, rank, officer, sword & baton crossed (1975) Insignia, metal, rank, officer, sword & baton crossed (1969) Insignia, metal, rank, officers, crown Insignia, metal, rank, NCO, crown Insignia, metal, rank, Warrant Officer, crown Palm leaf device for Vietnamese Cross of Gallantry Medal, service, Vietnamese campaign Button, insignia, Corps of Staff Cadets Insignia, metal, RAAC, beret/collar Insignia, metal, 1 AR, beret/collar Insignia, metal, 1/15 RNSWL, beret/collar Insignia, metal, 2 Cav, beret/collar Insignia, metal, 2/14 QMI Insignia, metal, 3 Cav, beret/collar Insignia, metal, 3/9 SAMR Insignia, metal, 4 Cav, beret/collar 4/19 PWLH Regt badge, head dress or collar Insignia, metal, 4/19 PWLH 8/13 VMR badges, head dress or collar Insignia, 10 LH, collar, silver plated 12/16 HRL, badges, head dress or collar Insignia, metal, RAA, officers, cap/hat, collar Insignia, metal, RAA, other ranks Button, insignia, RAA Button, insignia, RAE Insignia, metal, RAE cap/hat collar Button, Insignia, Royal Aust Survey Corps Insignia, metal, Royal Aust Survey Corps Insignia, metal, Royal Aust Corps of Signals, cap/collar Button, insignia, Royal Aust Corps of Signals Button, insignia, R Aust Inf Insignia, metal, R Aust Inf, cap/hat, collar Insignia, metal, Commando Insignia, metal, RSAR, cap/hat collar Insignia, metal, RAR, cap/hat collar Insignia, metal, RNSWR Insignia, metal, RVR, cap/hat Insignia, metal, RQR ,cap/hat collar Insignia, metal, RWAR, cap/hat collar Badge, qualification, Infantry Combat Button, insignia, Chaplains, Christian Insignia, metal, Chaplains, Christian, cap/hat collar Insignia, metal, RACT Button, insignia RACT Button, insignia, RAAMC Insignia, metal, RAAMC, cap/hat collarl, Insignia, metal, RAADC, cap/hat collar Button, insignia, RAAOC Insignia, metal, RAAOC' VOLUME 2 Button, insignia, RAEME RAEME, badges, collar Insignia, metal, R Aust Army Educational Corps, cap/hat collar Button, insignia, AACC Insignia, metal, AACC, cap/hat collar Button insignia, R Aust Army Pay Corps Insignia, metal, R Aust Army Pay Corps, cap/hat collar Insignia, metal, Aust Army Legal Corps, cap/hat collar Insignia, metal, R Aust Army Provost Corps, cap/hat collar Button, insignia, R Aust Corps of MP Button, insignia, Aust Army Psych Corps Insignia, metal, Aust Army Psych Corps Button, insignia, Aust Army Nursing Corps Insignia, metal, R Aust Army Nursing Corps Button, insignia, WRAAC Insignia, metal, rank, mess undress, brooch type, RAAMC Insignia, metal, WRAAC Insignia, shoulder, Apprentice Insignia, metal, Army Apprentices School Button, insignia, OCS Button, insignia, OCS ,blazer Insignia, metal, OCS, cap/hat collar Button, insignia, RMC, blazer Insignia, metal, RMC Medallion, RMC Insignia, metal, AUR, cap/hat collar Button, insignia, MonUR Insignia, metal, MUR, cap/hat collar Button, insignia, MonUR Insignia, metal, MonUR, cap/hat collar Insignia, metal, UNSWR , cap/hat collar Insignia, metal, SUR, cap/hat collar Button, insignia, SUR Insignia, metal, QUR, cap/hat collar Button, insignia, QUR Insignia, metal, WAUR, cap/hat collar Button, insignia, WAUR Badge, metal, qualification, flying, Army pilot, Aust Army Aviation Corps Insignia, metal, Aust Army Aviation Corps Button, insignia, Aust Army Aviation Corps Badge, metal, qualification , bandsman Badge, metal, qualification, Drum Major Button, insignia, Aust Army Band Corps Insignia, metal, Aust Army Band Corps, cap/hat collar Rubber stamp of Engineering Design Establishment giving conditions of issue to contractorsspecifications -
Federation University Historical CollectionDocument, Specifications for Building a Stone Wall and Making a Brock Tunnel for the Council of the School of Mines Ballarat, 1898, 1898
... The work was undertaken by Johnson brothers for one hundred and fifteen pounds five shilllings. Specifications for Building a Stone Wall and Making a Brock Tunnel for the Council of the School of Mines Ballarat, 1898 Document ...Four handwritten foolscap pages. The wall was to be built on the Eastern side of the ground facing Albert Street. The stonewall to be 73 feet long and eight feet six inches high. A curved tunnel formed to be about 50 feet long. The work was undertaken by Johnson brothers for one hundred and fifteen pounds five shilllings.ballarat school of mines, stone wall, tunnel, albert street -
Federation University Historical CollectionDocument, Specification for building in One Cornish Flue Boiler for the West Berry Consols
... Specification for building in One Cornish Flue Boiler for the West Berry Consols..."[4] He was successful in combating and remedying the gas and ventilation troubles of the Deep Mines of Creswick and Allendale Districts after all had failed.[5] Richard Squire One Cornish Flue Boiler Specifications West Berry Consols Handwritten document outlining Specification for buildign in One Cornish Flue Boiler for the West Berry Consols Specification for building in One Cornish Flue Boiler for the West Berry Consols Document ...In 1905 Richard Squire was manager of the West Berry Consols at Allendale, and developed an improved system of mine ventilation, which was supported in "The Age."[4] He was successful in combating and remedying the gas and ventilation troubles of the Deep Mines of Creswick and Allendale Districts after all had failed.[5]Handwritten document outlining Specification for buildign in One Cornish Flue Boiler for the West Berry Consolsrichard squire, one cornish flue boiler, specifications, west berry consols -
Federation University Historical CollectionDocument - Document - Design, E J Barker: University of Melbourne: Bachelor of Mechanical Engineering; Engineering Drawing Grade IIIB, Worm Reduction Gear, 1947
... The Library building at Mount Helen Campus is named after him. e j barker jack barker melbourne university engineering diploma of mechanical engineering diploma of electrical engineering school of mines ballarat smb diploma in education vice principal principal foundation director ballarat college of advanced education bcae bachelor of mechanical engineering library mount helen campus engineering drawing grade IIIb design specifications worm reduction gear manufacture supply Lined paper, hand written in blue ink Hand drawn diagrams Pages in buff coloured folder. ...Document is an assignment for Engineering Drawing Grade IIIB. It was the Design and Specifications for "Worm Reduction Gear". They were to give the specifications for the manufacture and supply of Worm Reduction Gear. Jack chose to do Engineering while still at Footscray Technical School as it gave access to Diploma Courses and tertiary studies. This enabled him to enter the University of Melbourne and do a Bachelor in Mechanical Engineering - 1945, 1946, and 1947. In 1948 he did a Diploma in Education at Melbourne University. From this path he was able to follow a career in teaching and his first appointment was at the School of Mines in Ballarat, (SMB) 1949. He became the first Vice Principal of SMB in 1960 and then Principal in 1964 to 1976. From 1976 to his retirement in 1987, he was the Foundation Director of Ballarat College of Advanced Education (BCAE). The Library building at Mount Helen Campus is named after him.Lined paper, hand written in blue ink Hand drawn diagrams Pages in buff coloured folder. Plastic slide clipse j barker, jack barker, melbourne university, engineering, diploma of mechanical engineering, diploma of electrical engineering, school of mines ballarat, smb, diploma in education, vice principal, principal, foundation director, ballarat college of advanced education, bcae, bachelor of mechanical engineering, library, mount helen campus, engineering drawing, grade iiib, design, specifications, worm reduction gear, manufacture, supply -
Federation University Historical CollectionDocument - Document - Design, E J Barker: University of Melbourne: Bachelor of Mechanical Engineering; Engineering Design Part II, 1946
... The Library building at Mount Helen Campus is named after him. e j barker jack barker melbourne university engineering diploma of mechanical engineering diploma of electrical engineering school of mines ballarat smb diploma in education vice principal principal foundation director ballarat college of advanced education bcae bachelor of mechanical engineering library mount helen campus engineering drawing design specifications manufacture extruder addition hydraulic press flywheel cams valve gear inlet valve exhaust valve 6 cylinder truck engine autoclave brown coal Four manila folders with design assessment in each. ...Four folders containing an Engineering Design Part II Project. Each has detailed written information and drawings. No.1: To design an Extruder Addition to the hydraulic press in the plate shop to enable it to be used as an extruding press to operate on materials similar in behaviour to a wax. No. 2: To design a flywheel of uniform strength of not less than 25 feet. No 3: To design cams, valve gear and inlet and exhaust valves for a 6 cylinder truck engine. No 4: To design an experimental brown coal autoclave for drying brown coal in 10 kilogram lots. Jack chose to do Engineering while still at Footscray Technical School as it gave access to Diploma Courses and tertiary studies. This enabled him to enter the University of Melbourne and do a Bachelor in Mechanical Engineering - 1945, 1946, and 1947. In 1948 he did a Diploma in Education at Melbourne University. From this path he was able to follow a career in teaching and his first appointment was at the School of Mines in Ballarat, (SMB) 1949. He became the first Vice Principal of SMB in 1960 and then Principal in 1964 to 1976. From 1976 to his retirement in 1987, he was the Foundation Director of Ballarat College of Advanced Education (BCAE). The Library building at Mount Helen Campus is named after him.Four manila folders with design assessment in each. Each folder has written descriptions and detailed drawings.e j barker, jack barker, melbourne university, engineering, diploma of mechanical engineering, diploma of electrical engineering, school of mines ballarat, smb, diploma in education, vice principal, principal, foundation director, ballarat college of advanced education, bcae, bachelor of mechanical engineering, library, mount helen campus, engineering drawing, design, specifications, manufacture, extruder addition, hydraulic press, flywheel, cams, valve gear, inlet valve, exhaust valve, 6 cylinder truck engine, autoclave, brown coal -
Federation University Historical CollectionDocument - Document - Design, E J Barker: University of Melbourne: Bachelor of Mechanical Engineering; Civil Engineering 1 and 1A; Design of Welded Plate Girder, 1946
... The Library building at Mount Helen Campus is named after him. e j barker jack barker melbourne university engineering diploma of mechanical engineering diploma of electrical engineering school of mines ballarat smb diploma in education vice principal principal foundation director ballarat college of advanced education bcae bachelor of mechanical engineering library mount helen campus engineering drawing design specifications manufacture civil engineering welded plate girder 60 feet steel columns Manila folder with design assessment. ...Assessment No 2 Project was to design a welded plate girder required in a building to span between two steel columns which have to be spaced 60 feet centre to centre. It needs to carry its own weight plus specified loads. This was part of Civil Engineering 1A . Jack chose to do Engineering while still at Footscray Technical School as it gave access to Diploma Courses and tertiary studies. This enabled him to enter the University of Melbourne and do a Bachelor in Mechanical Engineering - 1945, 1946, and 1947. In 1948 he did a Diploma in Education at Melbourne University. From this path he was able to follow a career in teaching and his first appointment was at the School of Mines in Ballarat, (SMB) 1949. He became the first Vice Principal of SMB in 1960 and then Principal in 1964 to 1976. From 1976 to his retirement in 1987, he was the Foundation Director of Ballarat College of Advanced Education (BCAE). The Library building at Mount Helen Campus is named after him.Manila folder with design assessment. Written descriptions and detailed drawings.e j barker, jack barker, melbourne university, engineering, diploma of mechanical engineering, diploma of electrical engineering, school of mines ballarat, smb, diploma in education, vice principal, principal, foundation director, ballarat college of advanced education, bcae, bachelor of mechanical engineering, library, mount helen campus, engineering drawing, design, specifications, manufacture, civil engineering, welded plate girder, 60 feet, steel columns -
Federation University Historical CollectionDocument - Document - Design, E J Barker: University of Melbourne: Bachelor of Mechanical Engineering; Machine Design Assignments, 1947
... The Library building at Mount Helen Campus is named after him. e j barker jack barker melbourne university engineering diploma of mechanical engineering diploma of electrical engineering school of mines ballarat smb diploma in education vice principal principal foundation director ballarat college of advanced education bcae bachelor of mechanical engineering library mount helen campus engineering drawing design specifications manufacture bristo plastic industries australian iron and steel olympic cable factory centre lathe head stock multitubular double effect evaporator 120 hp diesel engine Manila folders with design assessments. ...Four folders of Machine Design projects. No.1: a. Reports on visits to various industries: Bristo Plastic Industries. b. Australian Iron and Steel. c. Olympic Cable Factory No 2: Medium Duty Centre Lathe Head Stock No.3: Vertical Multitubular Double Effect Evaporator No.4: Design and Drawings of 120 HP Diesel Engine Jack chose to do Engineering while still at Footscray Technical School as it gave access to Diploma Courses and tertiary studies. This enabled him to enter the University of Melbourne and do a Bachelor in Mechanical Engineering - 1945, 1946, and 1947. In 1948 he did a Diploma in Education at Melbourne University. From this path he was able to follow a career in teaching and his first appointment was at the School of Mines in Ballarat, (SMB) 1949. He became the first Vice Principal of SMB in 1960 and then Principal in 1964 to 1976. From 1976 to his retirement in 1987, he was the Foundation Director of Ballarat College of Advanced Education (BCAE). The Library building at Mount Helen Campus is named after him.Manila folders with design assessments. Written descriptions and detailed drawings.e j barker, jack barker, melbourne university, engineering, diploma of mechanical engineering, diploma of electrical engineering, school of mines ballarat, smb, diploma in education, vice principal, principal, foundation director, ballarat college of advanced education, bcae, bachelor of mechanical engineering, library, mount helen campus, engineering drawing, design, specifications, manufacture, bristo plastic industries, australian iron and steel, olympic cable factory, centre lathe head stock, multitubular double effect evaporator, 120 hp diesel engine -
Federation University Historical CollectionDocument - Document - Design, E J Barker: University of Melbourne: Bachelor of Mechanical Engineering; Class notes and definitions
... The Library building at Mount Helen Campus is named after him. e j barker jack barker melbourne university engineering diploma of mechanical engineering diploma of electrical engineering school of mines ballarat smb diploma in education vice principal principal foundation director ballarat college of advanced education bcae bachelor of mechanical engineering library mount helen campus engineering drawing design specifications manufacture heat engines internal combustion engine symbols of physical quantities hisory people inventions instructors examiners report refrigeration Handwritten and typed notes. ...Notes are definitions and information on various aspects of Mechanical Engineering - Heat Engines, Internal Combustion Engines, Symbols for Physical Quantities, Historical-people and their inventions, Minutes of Meeting of Instructors and Examiners, Engineering Thermodynamics III, Refrigeration. Jack chose to do Engineering while still at Footscray Technical School as it gave access to Diploma Courses and tertiary studies. This enabled him to enter the University of Melbourne and do a Bachelor in Mechanical Engineering - 1945, 1946, and 1947. In 1948 he did a Diploma in Education at Melbourne University. From this path he was able to follow a career in teaching and his first appointment was at the School of Mines in Ballarat, (SMB) 1949. He became the first Vice Principal of SMB in 1960 and then Principal in 1964 to 1976. From 1976 to his retirement in 1987, he was the Foundation Director of Ballarat College of Advanced Education (BCAE). The Library building at Mount Helen Campus is named after him.Handwritten and typed notes. Plain and lined sheets.e j barker, jack barker, melbourne university, engineering, diploma of mechanical engineering, diploma of electrical engineering, school of mines ballarat, smb, diploma in education, vice principal, principal, foundation director, ballarat college of advanced education, bcae, bachelor of mechanical engineering, library, mount helen campus, engineering drawing, design, specifications, manufacture, heat engines, internal combustion engine, symbols of physical quantities, hisory, people, inventions, instructors, examiners, report, refrigeration -
Federation University Historical CollectionPlan - Architectural Plans, Australian Natives' Association Ballarat Branch No 4 Architectural Plans
... He was responsible for the design of a number of buildings in the district. This item is the "Specification of work required to be done and materiaals required for construction of the new A.N.A. ...Fourteen detailed drawings showing the specifications for each section of the new A.N.A. building for Ballarat. ...(The Herald, 18 June 1924) ana australian natives' association architecture percy richards building specifications ballarat technical art school ballarat materials construction P.S. ...Percy Richards taught Architecture and Building Construction at The Ballarat Art School - a division of Ballarat School of Mines from 1918-1921. He was responsible for the design of a number of buildings in the district. This item is the "Specification of work required to be done and materiaals required for construction of the new A.N.A. Building at the corner of Sturt, Albert and Lewis Streets, Ballarat. Prepared by and to the satisfaction of P.S. Richards, A.R.V.I.A. Architect and subject to the General Conditions of Contract." "BALLARAT CITY A.N.A. BALLARAT, Wednesday — The Ballarat City branch, A.N.A., which was formed nearly 50 years ago, ranks fourth on the association records, but several of the members were prominent in establishing the association in Melbourne a year or two earlier. On the past half-year's operations the total funds increased by £1558/18/3 to £29.389/11/11. The membership now totals 949. The committee recommended that as the property at the corner of Sturt and Albert Streets, which had been intended as the site of a new hall, had been sold, steps should he taken to remodel the present hall, and bring It up to date. The report was adopted." (The Herald, 18 June 1924)Fourteen detailed drawings showing the specifications for each section of the new A.N.A. building for Ballarat. A 24 page document submitted to the Public Health Department, Victoria, received 15 January 1918 and a 3 page document related to Reinforced Concrete Particulars. All contained in a labelled black metal cylinder.A.N.A.4. PLANS painted on side and lid. Signature of P.S. Richards.ana, australian natives' association, architecture, percy richards, building specifications, ballarat, technical art school ballarat, materials, construction, p.s. richards, percival selwyn richards -
Glen Eira Historical SocietyDocument - Grange Road, 77, Glen Huntly
... This file contains 4 items about the purchase and construction of this property: 1/ The original contract of sale of land dated 25/09/1936 for Gertrude & Hulbert Gorrie situated on the corner of Grange and Neerim Road. 2/ The original typed building agreement dated 25/09/1936 between the contractor Ernest F Barnard and the purchasers Mr & Mrs Hulbert Gorrie. 3/ The original blueprint plan of a brick villa at the corner of Grange & Neerim Road for Mr & Mrs Hulbert Gorrie. Dated 25/09/1936. 4/ The original specification...Glen Eira Historical Society 965 Glen Huntly Rd Caulfield VIC 3162 melbourne This file contains 4 items about the purchase and construction of this property: 1/ The original contract of sale of land dated 25/09/1936 for Gertrude & Hulbert Gorrie situated on the corner of Grange and Neerim Road. 2/ The original typed building agreement dated 25/09/1936 between the contractor Ernest F Barnard and the purchasers Mr & Mrs Hulbert Gorrie. 3/ The original blueprint plan of a brick villa at the corner of Grange & Neerim Road for Mr & Mrs Hulbert Gorrie. Dated 25/09/1936. 4/ The original specification ...This file contains 4 items about the purchase and construction of this property: 1/ The original contract of sale of land dated 25/09/1936 for Gertrude & Hulbert Gorrie situated on the corner of Grange and Neerim Road. 2/ The original typed building agreement dated 25/09/1936 between the contractor Ernest F Barnard and the purchasers Mr & Mrs Hulbert Gorrie. 3/ The original blueprint plan of a brick villa at the corner of Grange & Neerim Road for Mr & Mrs Hulbert Gorrie. Dated 25/09/1936. 4/ The original specification for the dwelling on the corner of Grange & Neerim Road, Glen Huntly for Mrs Gertrude Gorrie & Mr Hulbert Hopetoun Gorrie by builder Ernest F Barnard.barnard ernest f, gorrie gertrude, gorrie hulbert hopetoun, hobart john bertram, coorigil road, carnegie, holloway st, ormond, chemists, parish of prahran, caulfield county of bourke, building agreement, brick houses, builders, plans, architectural drawings, grange road, glen huntly, holloway street, ormond, emma street, grange road, neerim road, gorrie h.h, gorrie gertrude, gorrie hulbert h, legal documents, barnard ernest franklin, e. j. & h. amos, hintons nursery, real estate agents, murrumbeena, caulfield -
Bendigo Historical Society Inc.Document - H. A. & S. R. WILKINSON COLLECTION: AGREEMENT TO BUILD HOUSE
... specifications for the build. Price: 2,300 pounds. Also, a paper signed by T. J. Roberts on the 3rd of January 1958 that on completion of contract for new building on block, lot 28, Specimen hill Road, Golden Square for P. ...Wilkinson Real estate buildings Agreement made the 3rd of January 1958 between Thomas James Roberts of 1 Ashley Street, Bendigo builder) and Peter William Tieman and Edith Ruby Tieman both of 60 Hodgkinson Street, Bendigo (owners) whereas the owners have land in Specimen Hill Road and have requested he builder to erect a dwelling house thereon. There 8 clauses on the agreement. There is also a sheet detailing the specifications ...Agreement made the 3rd of January 1958 between Thomas James Roberts of 1 Ashley Street, Bendigo builder) and Peter William Tieman and Edith Ruby Tieman both of 60 Hodgkinson Street, Bendigo (owners) whereas the owners have land in Specimen Hill Road and have requested he builder to erect a dwelling house thereon. There 8 clauses on the agreement. There is also a sheet detailing the specifications for the build. Price: 2,300 pounds. Also, a paper signed by T. J. Roberts on the 3rd of January 1958 that on completion of contract for new building on block, lot 28, Specimen hill Road, Golden Square for P. W. & E. R. Tieman agreeing to pay H. A. & S. R. Wilkinson the sum of 82 pounds 10 shillings for commission due on such contract.h.a. & s.r. wilkinson, real estate, buildings -
Phillip Island and District Historical Society Inc.Newspaper Clipping, New Boat, 22/7/1968
... Phillip Island and District Historical Society Inc. phillip-island-and-the-bass-coast Collection of newspaper clippings from Scrap Book 1960 - 1973 Ken Lacco boat building Newhaven cray fishing shark fishing boats Boat Specifications Newspaper clipping Jean Jamieson Photo and article - building of cray and shark fishing boat by Ken Lacco of Newhaven New Boat Newspaper Clipping ...Collection of newspaper clippings from Scrap Book 1960 - 1973Photo and article - building of cray and shark fishing boat by Ken Lacco of Newhavenken lacco, boat building, newhaven, cray fishing, shark fishing boats, boat specifications, newspaper clipping, jean jamieson -
Bendigo Historical Society Inc.Photograph - Napoleon Reef Gold Mine Battery Site, 1936
... building is proceeding. The design of engine room, change house and machine shops is now in hand and erection will proceed as soon as working plans and specifications are prepared.' ...building is proceeding. The design of engine room, change house and machine shops is now in hand and erection will proceed as soon as working plans and specifications are prepared.' ...The Napoleon (BML) gold mine (1932) was located near McDougall Road, Golden Gully, between Martin and Hattam Street. It had a depth of 921 feet. It was one of the latest and most lavish of Bendigo's mines. Plant and equipment were electrically driven. The four-compartment shaft, extra large by goldfield's standards, measured 17 feet 6 inches by 5 feet 2 inches and was cement lined below 900 feet instead of being red gum boxed as was the usual practice. The workshop was equipped to carry out all repairs for the equally lavish BML mines on the Nell Gwynne and Carshalton reefs. (The Gold Mines of Bendigo, Book 2, Arthur Victor Palmer) 'Napoleon BML Mines No Liability have issued a report for the fortnight ended September 5, where it states that the development scheme has been formulated and necessary equipment is being ordered. The Napoleon main shaft, (about 1700 feet south of the old Napoleon shaft) will be a four compartment shaft (17ft 6 inches by ft 2 inches inside the timber). aLevels will be opened at approximately 100 ft vertical intervals and cross-cuts extended approximately 125 ft each side of centre country to explore a cross-section across the anticline opposite to the shaft. At every fifth level, main drives will be extended north to connect with the old Napoleon shaft and south approximately 1800 ft. At the latter point, another cross-section of the anticline will be explored by rising and cross-cutting. The old Napoleon will be unwatered and on the 500ft and 1000 ft levels main drives will be driven to connect with main levels from the Napoleon main shaft to the south as well as being driven north 1800 ft where another cross-section of the anticline will be explored. Cross-sections further north and south may be developed as desired and also at intermediate points if necessary. Clearing and grading of the main shaft site are now in progress and the erection of the office and store building is proceeding. The design of engine room, change house and machine shops is now in hand and erection will proceed as soon as working plans and specifications are prepared.' The main shaft has been commenced at 3ft and advanced 10 ft. to 13 ft. https://trove.nla.gov.au/newspaper/article/10975478?searchTerm=napoleon%20bml (The Argus, 8th. September 1934, 'Mining' page 18) Significant to mining history of Bendigo.Black and white photograph of a stamper head being lowered into position on the battery site of the Napoleon Reef Gold Mine. A wooden gantry supports the battery head as it being lowered. Three large concrete foundations are visible in immediate background, two of which have stampers already in position, the third stamper is being lowered onto the final foundation. In immediate foreground, 'boxing' is erected for future concrete pours. napoleon gold mine, napoleon reef gold mine -
NMIT (Northern Melbourne Institute of TAFE)Folder: Alterations and additions W.J.Baker Memorial Hall 1967 PTC, Folder: Architectural Specifications. Alterations and additions W.J.Baker Memorial Hall 1967 PTC
... NMIT (Northern Melbourne Institute of TAFE) Preston Technical College Buildings W.J.Baker Memorial Hall NMIT Manila folder of architectural specifications for the alterations and additions to the W.J.Baker Memorial Hall of Preston Technical College from Drayton and Colman, Architects dated 1967. ...Manila folder of architectural specifications for the alterations and additions to the W.J.Baker Memorial Hall of Preston Technical College from Drayton and Colman, Architects dated 1967. Also photograph of the hall which is undated but estimated to be 1976-1977.preston technical college, buildings, w.j.baker memorial hall, nmit
