Small round wooden container with candle inside.candle lighting wax

Portable candleholders were commonly in use in Australian homes in the 1800s. Candles were very expensive in Australia and often were not available in stores. However, after 1850 the price of candles was reduced and they became readily available throughout Australia. Candleholders were popular as they protected furniture from hot wax. The dish around the candle stem collected the hot wax that could be reused later. When carrying the candleholder, the dish also protected the hand from the hot wax. This candle-holder is an example of an item commonly used before electricity was connected to the area.The candleholder is a hollowed round,saucer-shape with a ring finger-grip on the side. It has been enamelled but the original blue paint has worn off and it is very chipped and rusted.candlestick-holder lighting

This object was used to light gas burners, lamps, lights etc. The tapers were used to light a burner that was hard to reach. It may also have been used in a church to light candles. This taper and matches holder has no known local significance but is an attractive object and will be useful for display.This is a brass object made in two parts – a rectangular container holding six wax tapers and a squat jar-shaped container for holding matches. The match holder is welded to the taper holder. The tapers are bent or broken in several places. The taper holder has a hinged lid with a brass top. The match holder has an embedded shell-shaped emblem. social history, warrnambool history, metal candle taper

This candle mould was used in the past to make six candles. Molten wax or tallow, together with a central thread or cotton, were poured into the columns and when set were removed from the moulds. Until the advent of electricity in the 1920s in Warrnambool, candles, lanterns and lamps were an important source of lighting in homes. Few homes had gas lighting. Many householders made their own candles from waste fat etc. This mould is retained as an example of the way householders in the past made their own candles to assist lighting in the home. This is a mould with a rectangular base and six cylindrical hollow columns with pointed ends affixed to the mould base. The columns are topped by a rectangular metal tray with the openings of the columns in the base of the tray. There is a metal clip attached to one end of the tray. The mould is very rusty warrnambool history, candles

Candle stick manufacturing moulds were extensively used throughout the Kiewa Valley and its regions to provide rural homes and businesses with illumination during times of limited light e.g. night time. These candles were used before the Kiewa Valley was placed of the electrical grid. The candles were made from parrafin wax. Before the 1920"s electricity was in limited supply due to the inability of the private electricity suppliers to service isolated rural regions. It was not until the Victorian State Government passed legislation (1920) to improve electricity supplies by forming the State Electricity Commission of Victoria (S.E.C.V.) Isolated rural communities could not meet the higher costs to have electricity supplies connected and therefore it was not until the 1950's that adequate domestic electrical power could be supplied.The isolation that the Kiewa Valley provided was of a greater hindrance to any utility (power,roads & telephone) where the cost per instillation was beyond the rural population's ability to pay either directly or indirectly. One of the benefits that the "closed" community of Mount Beauty had, when it was administered by the SECV was that some utility costs were a lot lower than that of the other settlements in the Kiewa Valley. This disparity led to a conference in 1928 of the rural and regional councils to demand from the Government an equality of electricity tariffs. This equality did not take place until 1965. The demand and usage of cheaper and affordable lighting that wax candles provided was for some rural families a way of life until the mid 1900's.This candle making mould is made from mild rolled sheet steel(tin). The top basin is rectangular in shape with beveled edges(facing in on all sides. There are six holes in the top basin for vertical hollow tubes to feed off. The six tapered cyclindrical tubes running from the top basin to the bottom raised platform base. All connections are welded together. The bottom of each cylinder has an opening for the candle wick. The wick is positioned in place before the molten wax is poured into the cylinders. A positioning ring has been welded to one bottom ring for stability.parrafin wax, candles, domestic household ighting

Portable candleholders were commonly in use in Australian homes in the 1800s. Candles were very expensive in Australia and often were not available in stores. However, after 1850 the price of candles was reduced and they became readily available throughout Australia. Candleholders were popular as they protected furniture from hot wax. The dish around the candle stem collected the hot wax that could be reused later. When carrying the candleholder, the dish also protected the hand from the hot wax. This one was used by Helena Warren of Newmerella.The candle-holder is an example of an item commonly used before electric light came to the area.A white enameled candleholder which is a hollowed round, white, saucer shape edged in dark blue. In the centre there is a candle-holder on a short stem. It has a dark blue finger-grip ring on the side.lighting candle-holder

Candles were the main source of lighting during the Colonial era. The candles were made at home from tallow, or animal fat, which was readily available and inexpensive. The tallow was soft, often had an unpleasant smell, band burned with a low, quickly fading light. Beeswax candles could be bought ready-made and lasted longer when lit. Bayberry wax could also be made into candles but was the process was labour intensive and time consuming. Spermaceti was from whale oil, a growing industry in the late 1800's, made firmer candles. Around this time wooden candle moulds were invented and uniform size and shape candles could be produced using the spermaceti wax. The candle mould is significant in the evolution of household lighting. It was an asset to the 19th century homemakers, allowing the production of their own candles in a uniform size. Candlelight allowed for the extension of time available for duties.Candle mould of tinplate for one dozen (12) candles. The tubular moulds stand upright, three rows of four, in a fitted tray. Another concave tray fits over the top ends of the moulds and has a hole above each of the candles, which is used for filling the moulds with melted wax. Ends have wire-reinforced edges.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, candle mould, candle making, lighting, candles, tallow, beeswax, bayberry wax, spermaceti was, whale oil, candlelight

Wax tapers were used by early settlers in Moorabbin Shire to light fires, candles and gas lamps. A narrow and shallow, cardboard box with blue and white label on the top. "Price's Dropless White tapers" " Medium" 2ounces "for lighting candles and gas fires". Makers mark is a sailing ship, set in an oval with the words "Ship Brand". Around the circumference of the oval are the words " London, Liverpool, Price's Candle Company Limited.kitchen equipment, lights, candles, fireplaces, early settlers, pioneers, moorabbin, bentleigh, cheltenham, market gardeners

A candle snuffer is an instrument used to extinguish burning candles. This is accomplished by smothering the flame with a small metal cup that is suspended from a long handle, and thus depriving it of oxygen. The use of a candle snuffer helps to avoid problems associated with blowing hot wax. Candle snuffers are still commonly used Churches. Prior to the introduction of gas and electricity, candles and kerosene lamps were used for lighting in households after sunsetEvery Early settlers depended on candlelight after sunset and candle snuffs were a safe, clean and efficient way to extinguish the candle flameThis candle snuff has a brass handle with a turned polished wood tip. The brass cup, that is placed over the flame to extinguish it, is decorated with an engraved brass moth.early settlers, pioneers, moorabbin, bentleigh, ormond, market gardeners, lights, lamps, candles

Candle mold for 6 candles. 6 long metal tubes between two pieces of metal. Top has holes for pouring hot wax and bottom has small holes for the insertion of wicks.lighting, candle

Used to hold wax tapers for lighting candlesLong black cylindrical tin case for wax tapers. Has gold oriental scenes. Made by Bryant & May, London (1916)Bryant & May, Londonwax tapers, candles, lighting, bryant & may

A candlestick is a device used to hold a candle in place. Candlesticks have a cup or a spike ("pricket") or both to keep the candle in place. Before the proliferation of electricity, candles were carried between rooms using a chamber stick, a short candlestick with a pan to catch dripping wax. Although electric lighting has phased out candles in much of the world, candlesticks and candelabras are still used in homes as decorative elements or to add atmosphere on special occasions. An item used in every home that did not have electricity from the late 19th to early 20th centuries as a lighting aid.Candlestick is round, hollowed scalloped edge to base. Coated with white enamel it features a large ring handle. Noneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, shipwreck coast, candle stick holder, candle holder, enameled candle stick holder, candlestick

Before electricity, candles were a primary source of light. They were used to light dinner tables, grand dining halls, and other formal settings. Tapers were essentially wax-coated wicks used to light gas or kerosene appliances or candles. Price's developed its 'Ship Brand' trademark in the 1870s, featuring the image of a clipper ship under sail. Price's candle tapers were made between 1880 and 1910. Price's Candles was founded in 1830 by William Wilson. A long thin vintage rectangular cardboard box of three pieces of used thin Price's Dropless White Tapers Medium, for lighting candles, gas etc. The lid is heavily patterned with blue and white product name and information. The base and the sides have no writing. Manufactured in Great Britain. Inside a patterned circle on the right is 'Price's Patent Candle Company. Limited London & Liverpool.'candles, lighting equipment, tapers, gas lighters