Yields information regarding tramrail hardening tests.SEC drawing number W-595, "Rail Hardening Tests by Commonwealth Industrial Gases". Drawn 3/5/1956. Beige paper copy of original dyeline print.Copy of originalsecv, state electricity commission of victoria, ballarat tramway, ballarat tramway museum, ballarat, electricity supply department, works division

Large unused rectangular label made for use on carbon dioxide cylinders with 5% CO2 printed on it. Beige with black lettering.label, cylinder, cig, carbon dioxide, commonwealth industrial gases ltd

Large unused rectangular label made for use on carbon dioxide cylinders with 10% CO2 printed on it. Beige with black lettering.label, cylinder, cig, carbon dioxide, commonwealth industrial gases ltd

This gas anaesthesia machine comprises a four yolk manifold, two circular metal components for nitrous oxide and two for oxygen. It is mounted atop a four pointed stand on casters for portability. In addition to reducing valves and regulators, the main stand also supports a cream-coloured, cylindrical Austox fractional rebreather and an ether vaporiser with variable bypass control within a circular glass container. portable, anaesthesia, midwifery, dentistry, obstetrics, oxygen, nitrous oxide, commonwealth industrial gases ltd, cig, austox fractional rebreather, ether vaporiser, variable bypass control, 1950

Humidicribs are used to transport sick babies from small hospitals to major hospitals for specialist care. They work by maintaining normal body temperature and provide oxygen if needed during ambulance transit. Known by a variety of commercial names, earlier humidicribs were ones heated with water bottles. Not part of an ambulances standard equipment, humidicribs are kept in ambulance stations and carried if babies needed to be transported. In the early days before humidicribs came into use and when air ambulances did not exist, many more babies died during emergency transits than do today Manufactured by the Commonwealth Industrial Gases Limited (better known as CIG), Australian-made Port-O-Cot brand humidicribs came replaced timber home-made humidicribs. They had electrical heating and easy to control oxygen flow and humidity control equipment. CIG also noted that noted that: Once the baby has been placed inside, the cot need not be opened, all nursing operations being carried out through the iris armholes. Even though the baby is in complete isolation nursing is a straight forward matter… The iris armholes allow nurses to feed, weigh, take temperatures, change napkins or, in fact, carry out any procedures without changing or disturbing the atmosphere within the cot. Happily for ambulance officers and nurses, the new Port-O-Cots were also much lighter and easy to carry than their old timber ones! metal box with carry handles and Perspex opening top. Carry handles at each end.PORT-O-COTinfant

Green case with lock at the front and plastic green handle on top with a manufacturer's label stuck on top. Inside the case is divided into three separate section, one containing a clear plastic mask with latex cushioning, the second containing a grey resuscitation bulb and the third containing a smaller clear plastic mask with latex cushioning, still in original packaging.Green manufacturer's label on top of case: THE CIG AIR-VIVA RESUSCITATOR Inside case: Original label 'Operating Instructions'ambu, resuscitator, cig air-viva

Large unused hexagonal shaped CIG label made for use on carbogen cylinders. Beige and green background with black lettering.Information printed on label: CIG MEDICAL SECTION [logo] / OXYGEN 90% CARBON DIOXIDE 10% / (These Percentages are subject to a tolerance) / Contents..........Imp. Gallons / COMPRESSED / CARBOGEN / C.I.G. (Victoria) Pty. Ltd. / 550 Latrobe Street, Melbourne, C.3 / Telephone: FJ6681 / USE NO OIL / OR GREASElabel, cylinder, cig, carbogen, compressed carbogen, oxygen, carbon dioxide, cig victoria

A sectioned water depression flowmeter apparatus on a tall metal stand with castors. There are three knobs on the camera-facing side of the apparatus: one black, one yellow, and one blue, which correspond to oxygen, propylene, and nitrous oxide respectively. Two gas canister lids attached to the apparatus with long metal ball chains read "AUSTOX/OPEN SLOWLY". Above the knobs is a set of glass tubes, that have had a metal panel between them cut out. Part of the valve on the left below the knobs has been sectioned away to show the spring mechanism inside.nitrous oxide, oxygen, propylene, hospital, anaesthesia

The regulator was sectioned by I. Philpott in 1962.The regulator, designed to protect anaesthetic machines against sudden changes in pressure, consists of two main, rounded bodies, joined by a short connection. The lower section consists of a valve and a nut on the end that can be adjusted to provide a secondary pressure range. The upper section shows the gauge, which has had part of its face removed to show the inner workings. The valve on the reverse side has also been sectioned.anaesthesia, gas, pressure

Issued to Ambulance stations during the 1990s and also used at public venues kike swimming polls as the item was easily used by personnel with limited training. Item was used taken in ambulances. Source Chas Martin (AHSV curator 29 Feb 2016).pale green fibre board box with carry handle. Opens out and contains a resuscitation kit. Contains instruction leaflets.THE CIG AIR VIVA RESUSCITATORresuscitation, air viva, cig

Portable resuscitation equipment. Not used in ambulances but kept at swimming pools, industrial sites and other work places for emergency use.Blue plastic carry case with clear plastic lid containing resuscitation equipmentCIG MEDISHIELD AIR-VIVA 2 RESUSCITATORresuscitation

Instruction booklet for infant incubators in AHSV collectionBlack and white printed 27 page brochure. Photograph of incubator/humidy crib on front cover.THERMOCOT CIGincubator

Brochure provides information on the use and maintenance of port-o-cot infant incubators/humidycribs.8 page brochure. Cover has brown stripe down right hand side with a photograph of a nurse place a term-o-cot humidicrib in the back seat of a car THE SAFE TRANSPORT OF TINY BABIES

Humidicribs are used to transport sick babies from small hospitals to major hospitals for specialist care. They work by maintaining normal body temperature and provide oxygen if needed during ambulance transit. Known by a variety of commercial names, earlier humidicribs were ones heated with water bottles. Not part of an ambulances standard equipment, humidicribs are kept in ambulance stations and carried if babies needed to be transported. In the early days before humidicribs came into use and when air ambulances did not exist, many more babies died during emergency transits than do today The Thermocot Developed from the Port-O-Cot, CIG later produced the Thermocot. The new humidicrib had a number of advantages over the Port-O-Cot. Most importantly it had an over-temperature alarm and cut out. It was also calibrated in degrees Celsius as by then the metric measuring system had been introduced to Australia. It also had a front opening canopy which was easier for nursing staff to use. Metal box with Perspex opening top section. Carry handles at each end.Thermocot portable infant incubator CIGinfant

Humidicribs are used to transport sick babies from small hospitals to major hospitals for specialist care. They work by maintaining normal body temperature and provide oxygen if needed during ambulance transit. Known by a variety of commercial names, earlier humidicribs were ones heated with water bottles. Not part of an ambulances standard equipment, humidicribs are kept in ambulance stations and carried if babies needed to be transported. In the early days before humidicribs came into use and when air ambulances did not exist, many more babies died during emergency transits than do today The Thermocot Developed from the Port-O-Cot, CIG later produced the Thermocot. The new humidicrib had a number of advantages over the Port-O-Cot. Most importantly it had an over-temperature alarm and cut out. It was also calibrated in degrees Celsius as by then the metric measuring system had been introduced to Australia. It also had a front opening canopy which was easier for nursing staff to use. Metal box with Perspex opening top section. Carry handles at each end.Thermocot portable infant incubator CIG

hard red leather case with oxy valvesMA38 oxy-viva operating instructions

Medium sized diamond shaped label made for use on cyclopropane cylinders. White with a dark orange background and black and white lettering.Information printed on label: AUSTOX [logo] / INFLAMMABLE / CYCLOPROPANE / FOR ANAESTHESIA / KEEP COOL / (PRODUCT OF THE OHIO CHEMICAL & MFG. CO.) / CONTENTS: OZ. GALLONS (IMP.) / GROSS WT. CYLINDER LBS. OZS. / TARE WT. CYLINDER LBS. OZS. / AUSTRALIAN OXYGEN & INDUSTRIAL GASES / PTY. LTD. / 550 LATROBE STREET / MELBOURNE / C1label, cylinder, cig, cyclopropane, austox, ohio chemical and mfg company, australian oxygen and industrial gases pty ltd, commonwealth industrial gases ltd

Large unused diamond shaped Austox label made for use on ethylene cylinders. Beige with red lettering.Information printed on label: SPECIALLY PREPARED FOR MEDICAL USE / AUSTOX [logo] / INFLAMMABLE / ETHYLENE / KEEP COOL / Product of the OHIO CHEMICAL & MFG. CO., CLEVELAND. / Contents...............c.ft. ............... gallons (Imp.) / Weight of Full Cylinder ..........lbs. ..........ozs. / 31 OUNCES ETHYLENE = 166 1/2 GALLONS (IMPERIAL) / Use only moderate force when closing valve / Always test with water for leakage after using / Australian Oxygen & Industrial Gases / Pty. Ltd. / MELBOURNElabel, cylinder, cig, ethylene, austox, ohio chemical and mfg company, australian oxygen and industrial gases pty ltd, commonwealth industrial gases ltd

Large unused diamond shaped Austox label made for use on ethylene cylinders. Red with beige lettering.Information printed on label: AUSTOX [logo] / INFLAMMABLE / ETHYLENE / KEEP COOL / Product of the British Oxygen Co. Ltd. / Contents...............c.ft. ...............gallons (Imp.) / Weight of Full Cylinder ..........lbs. ..........ozs. / 31 OUNCES ETHYLENE = 166 1/2 GALLONS (IMPERIAL) / Use only moderate force when closing valve / Always test with water for leakage after using / Australian Oxygen & Industrial Gases / Pty. Ltd. / MELBOURNElabel, cylinder, cig, ethylene, austox, british oxygen company, boc, australian oxygen and industrial gases pty ltd, commonwealth industrial gases ltd

Large unused diamond shaped Austox label made for use on carbon dioxide cylinders. Black and beige background, with beige and red lettering.Information printed on label: SPECIALLY PREPARED FOR MEDICAL USES. / AUSTOX [logo] / COMPRESSED / CARBON DIOXIDE / KEEP COOL [in red] / WEIGHTS: / GROSS..........LBS. ........OZS. / TARE..........LBS. ........OZS. / NET..........LBS. .......OZS. / Contents Imp. Gallons / USE NO OIL OR GREASE ON VALVE [in red] / AUSTRALIAN OXYGEN / AND / INDUSTRIAL GASES / PTY. LTD. / MELBOURNElabel, cylinder, carbon dioxide, cig, commonwealth industrial gases ltd, compressed carbon dioxide, austox, australian oxygen and industrial gases pty ltd

A funnel, held above the patient's face, was almost the standard of giving oxygen until c.1930. It was quite useless, enriching the inhaled atmosphere by only about 3% of oxygen.Clear dimpled glass in the shape of a funnel, with red strong running through the centre, and tied to one side.oxygen, oxygen therapy, funnel, cig, commonwealth industrial gases

In 1903 the oxyacetylene welding process was developed. Around the same time, new cryogenic air separation processes, based on work undertaken by Carl von Linde and others, replaced the barium oxide process. This paved the way for larger scale and more efficient production. British Oxygen Company, [1905 to 1969] was formally BRIN'S Oxygen Company Ltd from 1886 to 1905. In 1969 it became BOC. These Blowpipes were used at the Ballarat School of Mine c1916 Interesting article = 1917. https://trove.nla.gov.au/newspaper/article/1629321Boxed Universal Blow Pipe, presented under a perspex top. Pipes mounted by metal bar and hooks to polished wooden board. Display case is 69.0cm x 12.0cm x 25.0cmBoth pipes have metal plates indicating information of maker.blowpipes, ocyacetylene, ballarat school of mines, welding, cutting, commonwealth industrial gases, boc, brin's oxygen company, british oxygen company

For medical emergencies at Gabo Island. Unsure if ever used. The portable, manual resuscitator kit is contained in its original green vinyl, hinged case that has corner protectors and two metal front fasteners. Information on the case indicates that it is an ‘Air CIG Viva Resuscitator’. It was used for manual force feeding oxygen into a person’s lungs with the use of a breathing bag, and there are instructions for using the resuscitating bag. The kit was produced by the Commonwealth Industrial Gases Limited, Alexandria, NSW, a company active between 1935 and 1994. An identical kit, which has been accurately dated to 1951, remains at the Cape Otway Lightstation . Another identical kit is held by the Ambulance Historical Society Victoria.Both kits have first level contributory significance for their historic values and provenance.Resuscitator box, green vinyl, hinged handle at top. Two metal fasteners on front, metal plated corners on lid. White thread stitching around edges. Case contains a resuscitator kit.On case "Air CIG Viva Resuscitator. "On sticker "C. of A. D.O.T. 141545"

Mechanical resuscitation devices, such as the Pulmotor and Lungmotor, were popular in the early part of the twentieth century. Their use waned in the 1920s as significant bodies like the British Medical Research Council and American Red Cross refused to endorse them. The most popular of the resuscitators to emerge in the 1930s was the E&J (Ericson and Johnson) resuscitator. The device was soon widely available, vigorously promoted with support from many medical practitioners. They were soon to be found in hospitals, emergency services like the ambulance and fire brigade, and voluntary life-saving organisations. In Australia, Norman James, director of anaesthesia at the Royal Melbourne Hospital, developed an interest in equipment for ambulances and the resuscitation of drowning victims. Little in the way of practical, portable equipment was available to either the ambulances or the voluntary life-saving organisations, such as Surf Life Saving Australia (SLSA); American resuscitators, like the E&J, were expensive and bulky to import. James designed a simple portable resuscitation device for local use after being approached by Jack Conabere, secretary of the Elwood Life Saving Club (ELSC). The resulting Royal Melbourne Hospital resuscitator, or the R.M. resuscitator as it was marketed, was a simpler, manual version of those available overseas. It was gas driven with a plunger, marked “Press”, and a safety valve. The small working unit attached directly to the facemask. Once the patient was positioned facedown and the airway cleared of debris, the mask was placed firmly over the face. The plunger allowed gas to flow and lung inflation; releasing the plunger allowed expiration. This simple resuscitator was marketed by Commonwealth Industrial Gases (CIG) and became very popular in Australia with volunteer and professional rescue organisations. It represents one of the many innovations in resuscitation equipment that resulted from cooperation between volunteer life savers and medical practitioners. Norman James worked closely with Jack Conabere and the Government Pathologist to develop the equipment. ELSC was the first life saving club to use the resuscitator on the beach. While conducting an early training exercise on 23 December 1951, they used it to successfully resuscitate a man who had drowned after capsizing his home made yacht. The R.M. resuscitator was also used in more inventive ways. At Fairfield Hospital in Melbourne, a group of physiotherapists and doctors did some innovative work with polio patients, teaching them glossopharyngeal (or “frog”) breathing, as a means of becoming less dependent on ventilators. In 1981, the Australian Standards Association stated that the RM head failed to meet its revised standards and it was withdrawn from the market. Red leather suitcase with black leather trim with metal studs. There are clip locks for locking the suitcase in the closed position. The suitcase contains equipment for oxygen resuscitation. There is a space allocated for two oxygen cylinders, however there are no cylinders present.Embossed into metal plaque: The C.I.G. / Oxy-viva / PORTABLE UNIVERSAL OXYGEN RESUSCITATORresuscitation, portable, surf life saving australia, royal melbourne hospital, rm resuscitator

This particular specimen is found in Wolgan Valley, New South Wales. It could be linked to the abandoned oil shale mining sites in Wolgan Valley such as Newnes. Newnes was an industrial complex operational in the early 20th century is now partly surrounded by Wollemi National Park. It produced motor spirit, kerosene, and gas oil. Newnes's Torbanite oil shale rock contained around 350 litres of oil shale per tonne. The Torbanite was mined by the Commonwealth Oil Corporation Ltd. Oil shale is a sedimentary rock and also a form of fossil fuel. It is often formed millions of years ago and usually contain fossilised remains of plants and/or animals. Oil shale is rich in kerogen that releases hydrocarbon when heated. These hydrocarbon can be used as an alternative petroleum or natural gas. The oil-shale rock was converted into oil by "destructive distillation"; the rock being heated until it broke down to form an oily vapour and an ash residue. Oil bearing shale is one of Australia's national assets. There are many oil companies established in Australia. It reflects Australia's rich natural resources as well as connection to the Australia's engineering and oil industry. The booming oil shale extraction businesses can be traced as far back as 1920s. This specimen is part of a larger collection of geological and mineral specimens collected from around Australia (and some parts of the world) and donated to the Burke Museum between 1868-1880. A large percentage of these specimens were collected in Victoria as part of the Geological Survey of Victoria that begun in 1852 (in response to the Gold Rush) to study and map the geology of Victoria. Collecting geological specimens was an important part of mapping and understanding the scientific makeup of the earth. Many of these specimens were sent to research and collecting organisations across Australia, including the Burke Museum, to educate and encourage further study.Piece of dark gray oil bearing shale with shades of light brown and fossilised leavesExisting label: OIL BEARING SHALE with / FOSSILISED LEAVES / Locality: Wongan Valley, NSW / Donor: Miss M. Cambell geological specimen, geology, geology collection, burke museum, beechworth, oil shale, shale, fossil fuels, alfred selwyn, wolgen valley, 1868 geological survey of victoria, rocks, sedimentary rocks, newnes, torbanite, commonwealth oil corporation ltd