Photo taken on the day of the Wattle's removal from the River Yarra by two mobile cranes, the vessel is suspended above the river. A very significant moment in the life of the Wattle as this was the first day of the major restoration project that continues from 2009 through 2012 aiming to finish in mid 2013. Prior to this restoration project there was a long lead up to find funding and resources to restore the Wattle and ensure that Wattle was not scrapped. The majority of this preparation and restoration work was and continues to be completed by volunteers.Colour photograph in a gilded wooden frame. S.T. Wattle being lifted by two cranes from the Yarra River onto 24 South Wharf. A number of crew can been seen wearing safety attire assisting with the manouvering of the vessel.photograph, wattle, river yarra, mobile crane, crane, steam tug, volunteers, bay steamers maritime museum, 2009

Digital Imagesyarra river melbourne docklands, yarra river, dock, docklands, shipping, port, channel, water, container, cranes

The Crane foundry opened some time before 1827 and was known as Atherton’s Foundry, run by James Atherton and Henry Crane. Initially it was a brass foundry, but by 1827 iron castings were also produced on the site. The main products were castings for the building industry, ironmongery and brassware. In the 1830s castings for the hand tool and lock industries were added to the product range and by 1836 Henry Crane had taken control of the business. The company became known as the Crane Foundry in 1847 with its own registered trademark. By the 1850s iron weights were produced, and a design was registered in 1872 with roundels decorating the edge. Brass weights were also produced, mainly after the regulation of 1890 that required weights of 2oz. or less to be made of brass. In the early 1900s the foundry began to produce castings for electric motors and continued to do so throughout its life. The Crane family continued to control the company until 1917 when William Cyril Parkes of lock makers Josiah Parkes & Sons Limited, Willenhall became a majority shareholder. Things were going well until the company’s liabilities spiraled out of control with the rise in electricity and gas prices along with the loss of two of the company’s largest customers. The factory went into liquidation and then closed in 2006 an end to one of Wolverhampton’s oldest companies.An item made by one of England's foundry’s based in Wolverhampton that exported items all over the world for many years. The scale gives a snapshot into the commercial life not only of England by Australian colonial life before Federation.Beam scale with three weights (4lb, 2lb, 1lb), metal tray, corrodedMarked on 2lb weight "Wolverhampton Crane Foundry" flagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, scale, beam scale, pounds and ounces, imperial weight, grocers scale, domestic scale, henry crane, crane foundry

Black and white photograph of the steam crane used to unload rock from the tramway which brought rock from the Colquhoun quarry to the Mississippi Creek landing, placing the rock into barges for transport to the entrance at Lakes Entrance, Victoria.Steam Crane Mississippi Creek transport, historic site

Built as a wooden flat wagon by Rawlings & Co in Melbourne in 1874. it was altered to a mobile 2 ton crane in 1898. In service in Maryborough for most of its service until February 1974.Actual identity of this unit is not confirmed and is possible it is one of other similar wagon mounted cranes. rebuilt with all timber components replaced at Echuca Wharf c2000 This vehicle is unusual and very significant as even though the timber components have been replaced it still retains substantial ironwork dating from 1874 and the 1898 conversion to portable cranes. Wooden Flat Portable Crane by Rawlings & Co Melbourne 1874 K 279wharf, shire of campaspe, rawlings & co melbourne, portable crane, rollingstock collection, steam trains

Port of Portland Authority archivesFront: (no inscriptions) Back: (no inscriptions)port of portland archives, cargo, cranes

Port of Portland Authority archivesFront: (no inscriptions) Back: 70% (blue pencil, upper right) 8 (pencil, centre) 24 CMS WIDE (pencil, upper centre) pencil crop marks on outer edgeport of portland archives, crane, cranes, harbour

Port of Portland Authority archivesFront: (no inscriptions) Back: (no inscriptions)port of portland archives, cranes, jetty cranes, containers

Port of Portland Authority archivesFront: (no inscriptions) Back: (no inscriptions)port of portland archives, cranes, cargo, cargo handling

Martin Crane was the first Bishop of Sandhurst. 1874 - 1901. The knife was probably a gift and is engraved on the front with his name. Martin Crane was a progressive leader in Sandhurst and built many new schools and churches in the Diocese. The knife is significant because it belonged to the first Bishop of Sandhurst, Martin Crane. Irish born Crane was an Augustinian priest before being ordained in 1874. Crane was Bishop of Sandhurst for 27 years. Elaborately engraved sterling silver knife. Floral, leafy design. Probably a cheese or butter knife. The handle sits 90 degrees to the knife blade. This a part of a cutlery set. Bishop. M. Crane. Engraved on the front of knife. Silversmith's name/symbol engraved on the back of knife blade. Sterling. P??? engraved on the back of knife blade. knife, silverplate, cutlery, catholic clergy

This item was donated by Pte Stanley William Exon (3791206) who was a National Serviceman with the Royal Australian Army Service Corps. He served in Vietnam with 2 Transport Platoon RAASC from April 1968 to January 1969.A coloured photograph in a black/brown frame with an off white matt. Photograph depicts Sikorsky Sky Crane lifting a MK V 5 ton cargo truck Vung Tau South Vietnam 1968Sikorsky Sky Crane lifting MK V 5 ton Cargo Truck Vung Tau South Vietnam 1968pte stanley william exon, 3791206, australian national serviceman, royal australian army service corps, 2 transport platoon, sikorsky skycrane, mk 5, cargo truck, vung tau, south vietnam, photograph

Digital copy of a colour photograph showing a crane hoisting an ornate sleeve for the base of the new flagpole for the Port Melbourne Town Hall.port melbourne town hall, local government - city of port melbourne, cranes, built environment - civic

A period view of later 20th century waterside. Possibly MelbourneFrom the Artist website: "Born in Melbourne Australia in 1941, David’s early career began in etching and a 6-year apprenticeship at the north Melbourne Printing School of Graphic Arts to colour etching assisted in his future career as an artist painter. Many hand skills were learned such as hand engraving, lino and wood cutting also etching with zinc, copper and magnesium, later etching on film in lithography. David’s painting career expands many years of studying the art of watercolour painting and he has been involved in teaching his great love of this medium to painters both in Australia and overseas since the late sixties. He is involved in regularly tutoring for the Australian and International Artist magazine."Maritime ArtMatted framed and glazed watercolour painting of a waterfront with vessels and cranesArtist signature at lwr right corner On verso: number 31 in black ink / name and address of the artist written in black ink (top left corner) / sticker with number AMAA3053, name of artist, title of painting and number GFAM 047/ in pencil : GFAM 047waterside, docks, cranes, shipping, port, david k taylor, artwork, marine art, artwork-paintings

Digital copy of a colour photograph showing a large crane hoisting a new flagpole over the Port Melbourne Town Hall for installation by workers in the bucket of a large cherry picker.port melbourne town hall, local government - city of port melbourne, cranes, built environment - civic

Digital copy of a colour photograph showing a large crane hoisting a new flagpole over the Port Melbourne Town Hall for installation by workers in the bucket of a large cherry picker.port melbourne town hall, local government - city of port melbourne, cranes, built environment - civic

Digital copy of a colour photograph showing a large crane in front of the Port Melbourne Town Hall in Bay Street in preparation for installing a new flagpole.port melbourne town hall, local government - city of port melbourne, cranes, bay street, built environment - civic

The repaired mast of the giant liner Cunard White-Star Liner "MAJESTIC" was installed in the liner at Southampton today. Photo shows the mast being lifted by the giant floating crane into the liner. A comparison of the size of the crane and mast is given by the men is picture.Black and white photograph depicting the mast being lifted onto the liner deck. A few men can be seen on board.On a thin paper glued to the back, typed in black ink: Issued 13-2-35 /Supplied: LNA/GIANT LINER'S MAST REPLACED./The repaired mast of the giant liner Cunard White-Star Liner "MAJESTIC" was installed in the liner at Southampton today. Photo shows the mast being lifted by the giant floating crane into the liner. A comparison of the size of the crane and mast is given by the men is picture. On the left side written in blue pen: Copyright LNA / NB (an arrow directs to stamp). On the right top corner an oval shape stamp in red ink: London News Agency Photos LTD. 46, Fleet Street, London, ECA. In the centre: Photo Supplied/L.N.A/Tel: Central 3751.passenger ship, liner, cunard-white star, rms majestic