Showing 182 items matching "d handle"
-
Bendigo Military MuseumEquipment - D HANDLE, KIT BAG
... D HANDLE, KIT BAG...D Handle...See catalogue No. 5942P for details of his service record. "D" handle used to close a kit bag. The eyelets on the bag are threaded along the straight part. ...Lockable metal D-ring handle for kit bag. Curved section and straight part are hinged. ...It can then be locked using a padlock through the small loop on the end of the curved sections. D Handle KEVIN JOHN HERDMAN Lockable metal D-ring handle for kit bag. ...Part of the Kevin John HERDMAN, No. 397661 Collection. See catalogue No. 5942P for details of his service record. "D" handle used to close a kit bag. The eyelets on the bag are threaded along the straight part. It can then be locked using a padlock through the small loop on the end of the curved sections.Lockable metal D-ring handle for kit bag. Curved section and straight part are hinged. Loop on the end of the curved section fits through a slot in the straight part.d handle, kevin john herdman -
Bendigo Military MuseumEquipment - "D" HANDLE, KIT BAG, 1940- 1945
... "D" HANDLE, KIT BAG..."D" handle, used to close a kit bag. The eyelets on the bag are threaded along the straight edge. ...Brass - "D" handle for kit bag....Passchendaele Barracks Trust Brass handle Brass - "D" handle for kit bag. Equipment "D" HANDLE, KIT BAG ..."D" handle, used to close a kit bag. The eyelets on the bag are threaded along the straight edge. It was then able to be locked using a padlock through the small ring area.Brass - "D" handle for kit bag.passchendaele barracks trust, brass handle -
Coal Creek Community Park & MuseumShovel
... 8454.1 - Shovel blade is deep with fairly steep sides and with a short shaft with a "D" handle that has two pieces of wire wound around it....Coal Creek Community Park & Museum 12 Silkstone Road Korumburra gippsland 8454.1 - Shovel blade is deep with fairly steep sides and with a short shaft with a "D" handle that has two pieces of wire wound around it. ...8454.1 - Shovel blade is deep with fairly steep sides and with a short shaft with a "D" handle that has two pieces of wire wound around it. -
Coal Creek Community Park & MuseumShovel
... 8452.1 - Not of "coal shovel" type ( blade lacks steep sides); has "D" handle; blade is secured to handle shaft by bolt and washer, but also a loop of thick wire through shaft....Coal Creek Community Park & Museum 12 Silkstone Road Korumburra gippsland 8452.1 - Not of "coal shovel" type ( blade lacks steep sides); has "D" handle; blade is secured to handle shaft by bolt and washer, but also a loop of thick wire through shaft. ...8452.1 - Not of "coal shovel" type ( blade lacks steep sides); has "D" handle; blade is secured to handle shaft by bolt and washer, but also a loop of thick wire through shaft. -
Rutherglen Historical SocietyOil Can, 1930 to 1960
... Cylinder with D shaped handle and long spout, pump action button lidless...Rutherglen Historical Society Murray Street Rutherglen high-country oil dispenser lubrication machinery Cylinder with D shaped handle and long spout, pump action button lidless Oil Can ...Cylinder with D shaped handle and long spout, pump action button lidlessoil dispenser, lubrication, machinery -
Woodend RSLFork (Department of Defence), Mid 20th Century
... Inscribed on handle 'D^D' (Department of Defence)...Woodend RSL 32 Anslow Street Woodend daylesford-and-the-macedon-ranges Representative of Department of Defence issued accoutrement possibly from WWII. cutlery department of defence 'dad and dave' (coloquial term for department of defence) fork army army issued accoutrement australian army british army ww2 wwii Inscribed on handle 'D^D' (Department of Defence) Silver fork issued by the Department of Defence. ...Representative of Department of Defence issued accoutrement possibly from WWII.Silver fork issued by the Department of Defence. Inscribed on handle 'D^D' (Department of Defence)cutlery, department of defence, 'dad and dave' (coloquial term for department of defence), fork, army, army issued accoutrement, australian army, british army, ww2, wwii -
Port Fairy Historical Society Museum and ArchivesInstrument - Accordion, early 1900s
... Initials "W" and "D" Scratched onto handle...Port Fairy Historical Society Museum and Archives 30 Gipps Street Port Fairy great-ocean-road Believed to have been played in the saloon of the S.S.Casino by a crew member local history musical instruments keyboard Initials "W" and "D" Scratched onto handle Black and tan button accordion played on the S.S.Casino Instrument Accordion Empress Accordeon made in Germany schutz marke (embossed swan) Registered ...Believed to have been played in the saloon of the S.S.Casino by a crew memberBlack and tan button accordion played on the S.S.CasinoInitials "W" and "D" Scratched onto handlelocal history, musical instruments, keyboard -
Dutch Australian Heritage Centre VictoriaCopper collection tin
... Oval tin, copper with soldered sides and half lid. D-shaped handle at one end....Brought out to Australia by Dutch migrants as a reminder of their heritage. street organ collection tin dutch migration Oval tin, copper with soldered sides and half lid. D-shaped handle at one end. Copper collection tin ...These tins were used to take up collection of money from the public by the operators of street organs. These wheeled mechanical organs used to be trundled around the streets of the Netherlands stopping at intervals to grind out some tunes.Brought out to Australia by Dutch migrants as a reminder of their heritage. Oval tin, copper with soldered sides and half lid. D-shaped handle at one end.street organ, collection tin, dutch migration -
Bendigo Military MuseumEquipment - MESS KIT
... Has engraved between handles "D^D" & "VD"....Has engraved between handles "D^D" & "VD". 1. Light brown canvas carry bag for two metal bowls. ...Part of equipment issued to all soldiers on front line to be used for both serving food and drink. Belongs to Captain Brian Clerehan VX 91862 who enlisted 29/3/43 and was discharged 17/7/46 from 2nd New Guinea Infantry Batt.1. Light brown canvas carry bag for two metal bowls. Fold out piece with metal stud to open/close and metal hooks on back to attach to kit. 2. Silver metal bowl approx .6 litre capacity with metal folding handles - oval in shape. 3. Silver metal bowl approx 0.5 litre capacity with metal folding handles and oval in shape. Small folding ring attached to bottom. Smaller bowl sits inside bigger bowl sitting in canvas container.2. Has engraved between handles "D^D" & "VD".mess kit, equipment, ww2 -
Frankston RSL Sub BranchBrush, Shaving, H.OLDFIELD & SON, 1941
... OLDFIELD & SON SYDNEY 1941 D^D stamped on handle...OLDFIELD & SON SYDNEY 1941 D^D stamped on handle Standard Defence issue shaving brush issued to Australian personnel during the World War 2 era. ...Standard Defence issue shaving brush issued to Australian personnel during the World War 2 era. It has a pine timber handle with black bristles.H. OLDFIELD & SON SYDNEY 1941 D^D stamped on handle -
Bendigo Military MuseumEquipment - BRUSH, S.A. Brush Co, 1952
... Stamped on side of wooden handle "D ^ D, S.A. BRUSH CO, 1952." ...Accessory Brush KEVIN JOHN HERDMAN Stamped on side of wooden handle "D ^ D, S.A. BRUSH CO, 1952." Army issue clothes brush with light brown wooden handle and plastic bristles. ...Part of the "Kevin John Herdman", No 397661 collection. See cat No. 5942P for details of his service.Army issue clothes brush with light brown wooden handle and plastic bristles.Stamped on side of wooden handle "D ^ D, S.A. BRUSH CO, 1952." accessory, brush, kevin john herdman -
Flagstaff Hill Maritime Museum and VillageDomestic object - Iron, Mrs Florence Potts, Late 19th to early 20th century
... Semi-circular or 'D' shaped wood handle and wood knob....Semi-circular or 'D' shaped wood handle and wood knob. Domestic object Iron Mrs Florence Potts ...Sad irons of the 19th century were so named because of the weight 1.8Kg that was needed to press wrinkled clothes and sheets. They were made of solid metal, including the handle. When the iron was heated, this meant that the handle would also heat up. The user would have to use a thick cloth or a mitt of some sort before they could pick up the iron. Even so, burns and blisters, as well as strained, tired arms, were a normal part of the “ironing day.” Mrs Mary Florence Potts of Ottumwa, Iowa, brought a change to the world of ironing. At the age of 19, in 1870, she invented her first sad iron. It had a hollow metal body that could be filled with a non-conducting material such as plaster of Paris. In 1871, Mary invented the removable wood handle, so that it could be changed from the cool iron to one that was hot and ready to use. A final improvement was the shape: Mary made both ends pointed so its user could iron in either direction. All of these inventions were patented under her name, a rarity for the time. Mary, with the help of her husband, tried unsuccessfully to market her invention on her own. It wasn't until she sold the sales rights to the American Manufacturing Company that sales took off. Advertised as "Mrs Potts' sad iron," it became a sensation. The company manufactured the iron from about 1876 to 1951. Mrs Potts' sad iron became a household word and a standard for future inventors to have to surpass. This didn't happen until 1882 when Henry W. Seely patented the first electric iron. The item is significant not only as a usable domestic tool, but it was, at the time of its creation, a revolutionary labour-saving device. Mrs Potts invention remains associated with a housewife's answer to the domestic drudgery of ironing.Iron,"Mrs Potts" pattern iron. Semi-circular or 'D' shaped wood handle and wood knob.Mrs Pottsflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, iron, clothes iron, flat iron, laundry, sad iron, mrs potts -
Flagstaff Hill Maritime Museum and VillageContainer - Copper Drum, 1903
... Metal box with tin sides, copper top and base and round, double layered lid that has a folding, D shaped handle. Referred to as a cordite container or copper drum. ...Handle stamped "S & Co. 1900" on lid. Base is stamped "R.G.D. 1903" (meaning the container seals are resistant to Rapid Gas Decompression (RGD)") Logo: triangular "(vertical arrow) / A T " between letters and date. Base also has blue plastic label "N.T. 55" Sticker: "B55". Metal box with tin sides, copper top and base and round, double layered lid that has a folding, D ...This copper and tin container was used for the storage and transport of cordite that replaced black powder in 1889 as a military propellant. The stamped of a government broad arrow and date 1903 show the item was made for the war department and not for commercial use. The container once empty of explosives was used for many years as a flour bin on board the crayfish ketch "Lady Brassey" by Mr Charlie Washbourne, Crib Point, Australia (on the Mornington Peninsula in Victoria). The ketch Lady Brassey was probably named after Anna or "Annie" Brassey (née Allnutt), Baroness Brassey (7 October 1839 – 14 September 1887) who was an English traveller and writer. Her bestselling book A Voyage in the Sunbeam, Our Home on the Ocean for Eleven Months (1878) describes a voyage around the world including a visit to Australia.The explosives container is an example of how explosive compounds were stored and transported at the turn of the 20th century. It is significate as it is in very good condition and an artefact from Australia's colonial history around the Federation, just as the country was gaining independence from Britain.Metal box with tin sides, copper top and base and round, double layered lid that has a folding, D shaped handle. Referred to as a cordite container or copper drum. Inscriptions are stamped onto the drum and are on a sticker under the lid.Handle stamped "S & Co. 1900" on lid. Base is stamped "R.G.D. 1903" (meaning the container seals are resistant to Rapid Gas Decompression (RGD)") Logo: triangular "(vertical arrow) / A T " between letters and date. Base also has blue plastic label "N.T. 55" Sticker: "B55". flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, copper container, gunpowder container, government issue container, r.g.d. 1903, lady brassey, charlie washbourne, crib point, baroness brassey, cordite container, copper drum, gun powder container, gun powder, black powder, black powder container, explosives storage, crayfish ketch -
Australian Racing MuseumBookmaker's bag
... Bookmaker's leather bag, with leather strap and handle, painted 'D. HILL / Reg V.R.C. V.A.T.C.'. ...Bookmaker's leather bag, with leather strap and handle, painted 'D. HILL / Reg V.R.C. V.A.T.C.'. Bookmaker's bag ...Used by Sidney Hill (Sid's father, also named Sidney Hill, was a bookmaker therefore Sid Jnr used his middle name Desmond).Bookmaker's leather bag, with leather strap and handle, painted 'D. HILL / Reg V.R.C. V.A.T.C.'. -
Cheese World MuseumToilet set, soap dish
... The lid has a green D-shaped handle with swirling green stripes to match dish. ...The lid has a green D-shaped handle with swirling green stripes to match dish. ...Part of the Uebergang Collection. Used by the Percy Uebergang family.Cream china soap dish with lid and drainer. The dish has a lip decorated in green with swirling green stripes on body. The lid has a green D-shaped handle with swirling green stripes to match dish. A white china drainer with green rim and 7 drain holes sits on the inside rim. Part of a toilet set consisting of bowl, ewer, soap dish and toothbrush holder.toilet sets, soap dishes, ablutions, allansford, uebergang, toilet sets, soap dishes, ablutions, allansford, uebergang -
Cheese World MuseumIron, spirit iron
... A hooked clip holds the top plate in place and the wooden handle is D-shaped. The silvered supply tank has a jet control....A hooked clip holds the top plate in place and the wooden handle is D-shaped. The silvered supply tank has a jet control. spirit iron Iron ...No known provenanceOmega spirit iron with cast base and semi-circular airholes at the edge. The metal bottom is polished. A hooked clip holds the top plate in place and the wooden handle is D-shaped. The silvered supply tank has a jet control.OMEGA Ω (Greek symbol on opposite side of top plate)allansford, irons, ironing, laundry equipment, spirit irons -
Flagstaff Hill Maritime Museum and VillageFire Pump, 20th century
... Red metal water pump. "D" shaped pump handle slides within pump cylinder, stand has 'U" shaped footrest. ...handle (no text visible). Fire pump, part of the W.R. Angus Collection. Red metal water pump. "D ...This water pump was owned by Dr. W.R. Angus AND was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) According to Berry, her mother Gladys made a lot of their clothes. She was very talented and did some lovely embroidery including lingerie for her trousseau and beautifully handmade baby clothes. Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . Its first station was in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill and purchased a share of the Nelson Street practice and Mira hospital (a 2 bed ward at the Nelson Street Practice) from Dr Les Middleton one of the Middleton Brothers, the current owners of what previously once Dr Tom Ryan’s practice. Dr Tom and his brother had worked as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He had been House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan had gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. When Dr Angus took up practice in the Dr Edward and Dr Tom Ryan’s old premises he obtained their extensive collection of historical medical equipment and materials spanning 1884-1926. A large part of this collection is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. and an ALDI sore is on the land that was once their tennis court). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served with the Australian Department of Defence as a Surgeon Captain during WWII 1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. He had an interest in people and the community They were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Fire pump, part of the W.R. Angus Collection. Red metal water pump. "D" shaped pump handle slides within pump cylinder, stand has 'U" shaped footrest. Pump has threaded fitting for pipe at top and wire filter at bottom. Made by Stokes, Melbourne. Remnants of red paint left on pump. Card label is attached. Moulded into metal "STOKES" and “MELB”. Label attached with string to handle (no text visible).flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, dr ryan, surgical instrument, t.s.s. largs bay, warrnambool base hospital, nhill base hospital, mira hospital, flying doctor, water pump, fire pump, fire extinguisher, safety equipment -
Flagstaff Hill Maritime Museum and VillageFunctional object - Trunk
... The lid and sides have dark red metal D-shaped handles that fold down. The two hinges on the lid have their fittings inside the trunk which is hinged across the back. ...The lid and sides have dark red metal D-shaped handles that fold down. The two hinges on the lid have their fittings inside the trunk which is hinged across the back. ...This metal travelling trunk belonged to David and Alice Ellis, a young couple married in Dublin in 1855. They left for Australia on the Schomberg clipper ship on October 6 that same year, joining the other passengers for the luxury sailing ship’s first voyage, bound for Melbourne, Australia. The Schomberg was grounded on a sand spit near Peterborough. All passengers and crew were safely rescued. They had been allowed to take something small with them when leaving the sinking vessel, and as such, Alice took a small cane basket and coin purse. The metal trunk was also amongst the couple’s possessions, along with a pair of candlesticks and a Bible. Their trunk was later retrieved from the ship’s deck by the crew of a steamer sent from Melbourne. At that time, David was 23 years old (born in Wales, in 1832) and Alice was 26 (born in Ireland, 1829). The couple lived in Tasmania for a short period before settling in the Western Districts of Victoria. David worked as a gardener and, when land in the area was available to purchase, David and Alice claimed a selection on Noorat Road near Terang. They settled there for the remainder of their lives, expanding the property that they named, ‘Allambah’, and had six children. David died in 1911, aged 79, and Alice passed away the following year, aged 83. B, B & B. Brand: - The company was renowned for its strongly constructed and high-quality travel goods. In 1906 the company was sold and renamed Buffalo Trunk Manufacturing Co. Interestingly, the trunk maker’s promise on its printed label is certainly fulfilled: - "B B BRAND. These Goods are manufactured of the best steel sheets, and are guaranteed to give every satisfaction, and will last for years."David and Alice Ellis’s donated possessions have great significance as a group of personal belongings saved from the sinking luxury clipper ship, the Schomberg, in 1855. The strong, well-crafted metal trunk is an example of high-quality travel luggage owned by newlyweds on their journey to a new life across the world. The well-made trunk is a rare shape. It joins Flagstaff Hill’s collection of artefacts from the Schomberg shipwreck, which is listed on the Victorian Heritage Register (VHR S612). The ship has historical significance as a rare example of a large, fast clipper ship on the England to Australia run, built to carry emigrants at the time of the Victorian gold rush. The ship’s design included the technical advances needed to break sailing records between Europe and Australia. The relationship of the objects in Flagstaff Hill’s Schomberg collection allows has potential interpretation of the story of the Schomberg. The collection of objects is archaeologically significant as the remains of an international passenger ship, as it represents aspects of Victoria’s shipping history, in addition to its association with the shipwreck and the ship.Traveller's metal trunk; small brown woodgrain patterned trunk with dark red features and brass lock. This well-made strong and sturdy piece of secure hand luggage has rounded corners and sides, with the ends of the lid slightly bulbous. The lid is reinforced inside across the centre. The lid and sides have dark red metal D-shaped handles that fold down. The two hinges on the lid have their fittings inside the trunk which is hinged across the back. Two dark red painted latches secure the front along with a brass rod and lockable latch in the centre front. The metal is shaped with a group of corrugated ribs on each side of the centre, around the trunk. A white printed and lacquered label is inside the lid and has additional handwritten text. The truck was the luggage of David and Alice Ellis on the sailing ship SCHOMBERG in 1855. Printed on the label: "B B BRAND./ These Goods are manufactured of the best / steel sheets, and are guaranteed to give every / satisfaction, and will last for years." Handwritten on the label: "8/3- 7/-" (possibly meaning Eight shillings and three pence, Seven shillings)flagstaff hill maritime museum and village, great ocean road, shipwreck coast, schomberg, sailing ship, 1855, david and alice ellis, schomberg passengers, b b brand, american made, traveller's trunk, hand luggage, metal trunk, schomberg ship, 1855 shipwreck, peterborough shipwreck, ss queen, david ellis, alice ellis, allambah terang, dublin emigrants, terang presbyterian church, western district victoria, antique trunk, vintage trunk, travel goods, travelling trunk, steel trunk, tin trunk, schomberg trunk, newlyweds, b b & b, boyd boyd & boyd, pittsburgh, rare shape, luggage, vintage luggage, victorian era, travel trunk, three locks, steamer trunk -
Kiewa Valley Historical SocietySuitcase
... Lid has two silver coloured(chrome) clasps each end with chrome lock in centre. "D" rings for missing handle secured to main frame by leather straps, these having metal chrome studs. ...Lid has two silver coloured(chrome) clasps each end with chrome lock in centre. "D" rings for missing handle secured to main frame by leather straps, these having metal chrome studs. ...Typical early 1920's to late 1950's suitcases made in Australia using Australian and British manufactured clasps and locks. The majority of manufactured goods especially locks and other metal components were sourced from England. English manufacturers, who in that period, where still world leaders of most manufactured items.This period 1920- 1950 shows the historical shift of the balance between the more complex metal imported items, mainly manufactured in Britain and that of the relevant infant stage of the developing manufacturing industries in the Australian market. The rarity of this type of suitcase is of significancy This suitcase belonged and was used by the C.W.A. of Tawonga.Suitcase brown, possibly lacquered cardboard with leather chrome studded reinforced corners. Lid has two silver coloured(chrome) clasps each end with chrome lock in centre. "D" rings for missing handle secured to main frame by leather straps, these having metal chrome studs. Substitute handle made from string. Metal protective trim on lid and top edge of suitcase compartmentLock stamped "Made in England" and two end clasps stamped "Made in Australia"case, luggage, travel suitcase, country women's association -
Tennis AustraliaRacquet, Circa 1983
... Dunlop logo and trademark feature on all four sides of shaft, and repeatedly across the handle grip. 'D' trademark in arrowhead device also features on black plastic butt cap. ...Dunlop logo and trademark feature on all four sides of shaft, and repeatedly across the handle grip. 'D' trademark in arrowhead device also features on black plastic butt cap. ...A Dunlop McEnroe Junior tennis racquet, with midsize frame. Model name features across base of head. Dunlop logo and trademark feature on all four sides of shaft, and repeatedly across the handle grip. 'D' trademark in arrowhead device also features on black plastic butt cap. Materials: Wood, Nylon, Plastic, Ink, Leather, Glue, Lacquer, Metal, Ribbon, Adhesive tape, Enameltennis -
Tennis AustraliaRacquet, Circa 1983
... Dunlop logo and trademark feature on all four sides of shaft, and repeatedly across the handle grip. 'D' trademark in arrowhead device also features on black plastic butt cap. ...Dunlop logo and trademark feature on all four sides of shaft, and repeatedly across the handle grip. 'D' trademark in arrowhead device also features on black plastic butt cap. ...A Dunlop Maxply McEnroe tennis racquet, with fibreglass reinforced shoulders. Model name features across base of head. Dunlop logo and trademark feature on all four sides of shaft, and repeatedly across the handle grip. 'D' trademark in arrowhead device also features on black plastic butt cap. Materials: Wood, Plastic, Ink, Leather, Glue, Lacquer, Metal, Adhesive tape, Fibreglass, Nylontennis -
Tennis AustraliaRacquet, Circa 1983
... Dunlop logo and trademark feature on all four sides of shaft, and repeatedly across the handle grip. 'D' trademark in arrowhead device also features on black plastic butt cap. ...Dunlop logo and trademark feature on all four sides of shaft, and repeatedly across the handle grip. 'D' trademark in arrowhead device also features on black plastic butt cap. ...An unstrung Dunlop Maxply McEnroe tennis racquet, with fibreglass reinforced shoulders, and handle grip with unbroken plastic wrap. Model name features across base of head. Dunlop logo and trademark feature on all four sides of shaft, and repeatedly across the handle grip. 'D' trademark in arrowhead device also features on black plastic butt cap. Materials: Wood, Plastic, Ink, Leather, Glue, Lacquer, Metal, Adhesive tape, Fibreglasstennis -
Bendigo Military MuseumContainer (item) - Cartographic Draughting Tool Box, Australian Defence Industries. ADI, 1956
... Pen ink, screw adjustable nib thickness, bone handle. d. Crow quill pen holder, plastic. e. ...Pen ink, screw adjustable nib thickness, bone handle. d. Crow quill pen holder, plastic. e. ...Equipment / Cartographic tools box. Enclosed in the base of the box is: - a. Parallel ruler 6", metal and brass. b. Feeler gauges 7 set. 60 x 10 mm. c. Pen ink, screw adjustable nib thickness, bone handle. d. Crow quill pen holder, plastic. e. Folding eye glass measuring (linen filter). Maker "Polychrome". 4 cm square. f. Plastic template various shapes. 60 X 95 mm. g. Repromat Registration studs set of 3. 20mm diameter. Stainless steel. h. Stainless steel, straight edge small. 38mm long. In lift out tray: - a. 2 X plastic scribing cutter holders, 3 leg fixed. b. Eye glass measuring "Leitz" WETZLAR, 45 mm High X 35 mm Dia. c. Jeweler screwdriver. 2 mm Blade. Moore & Wright, Sheffield, England. d. Black colored lead pencil. e. Pin vice. (Draughtsman's pricker) f. 4 X assorted paint brushes, artists. Built into the lid is a scribing tip holder with the capacity to hold 12 sapphire cutting tools: - a. 1 X 0.004" sapphire cutting tool. rasvy, royal australian army service corps, fortuna, army survey regiment, army svy regt, asr -
Flagstaff Hill Maritime Museum and VillageEquipment - Navigation Lamp, Port, George Bocock & Co. Ltd, Trading As Seahorse Lamps, 1930s
... handle on top. The curved, clear glass Fresnel has moulded ribs, top and bottom. The chimney has a hinged cap with a clip closure. One flat panel has a firmly attached, hollow rectangular channel for mounting onto a post or bracket. The other flat panel has a ‘D...handle on top. The curved, clear glass Fresnel has moulded ribs, top and bottom. The chimney has a hinged cap with a clip closure. One flat panel has a firmly attached, hollow rectangular channel for mounting onto a post or bracket. The other flat panel has a ‘D ...The donor recovered this navigation lamp before the 1980s from an old storage area in a South Melbourne factory where he worked. He asked about the lamp, but nobody there knew anything about its origin, and he was told that he could have it. This is a complete ship navigation lamp with its original oil burner. The internal red colour and shape indicate that the lamp was used for the port side of a vessel. The burner assembly is fixed to a removable tray, and the burner disconnects from the tank to allow fuel to be added. Light showing from the lamp is magnified by the polished brass reflector behind it, and the painted internal surfaces give the light its red colour. The lid on the chimney unclips for inspection purposes. The wedge shape of the lamp is intentional. It allows the light to be visible horizontally from up to a 112.5-degree angle, and to be invisible past that angle. The light's colour and position are part of the code of signals that inform viewers of the vessel’s position, direction of travel and status. The red lights indicate the port side of a vessel, green lights indicate the starboard side, and white lights are used on the masthead. From 1972, lights and signals on marine vessels are required to be fitted according to the International Regulations for Preventing Collisions at Sea. SEAHORSE lamp, made in Britain: The firm Bocock & Wilkinson was established in Birmingham in 1890 as an electroplate manufacturer. In 1900, Kelly’s Directory lists the firm as a ship lamp manufacturer. In 1910, the firm was listed Trading As “Seahorse” at 17 & 18 Mott Street, Birmingham. The firm later became Bocock & Son, and in 1932 was listed as George Bocock & Co. Ltd, and in 1973, it was still at that address. Ship’s navigation lamp: an original, galvanised metal, Port bow-side lamp. The wedge-shaped case has an arc front and two flat side panels that meet at the back, with a metal chimney and a swinging ‘C’ shaped handle on top. The curved, clear glass Fresnel has moulded ribs, top and bottom. The chimney has a hinged cap with a clip closure. One flat panel has a firmly attached, hollow rectangular channel for mounting onto a post or bracket. The other flat panel has a ‘D’ shaped, swinging handle, and slides upwards to access the burner assembly with its original brass burner. Concentric rings of ventilation holes are in the base. A removable tray, with ventilation holes on two edges, holds the round fuel tank and burner and the short post with the curved brass reflector. All internal metal surfaces, apart from the brass burner and reflector, were painted red sometime after the lamp’s manufacture. Inscriptions are embossed on the three brass plaques on the front; one has a rope design border and a seahorse emblem. Branded Seahorse, made in Great Britain, Ca. 1930s. Plaque on top, crescent shape: “PORT” Plaque in centre, square logo: “[rope design border] [Seahorse logo] “SEAHORSE / G B / TRADE / MARK / P55933” Plaque on base, rectangular: “PATENT NO. 546575 / AND OTHERS PENDING” flagstaff hill maritime museum and village, great ocean road, shipwreck coast, ship lamp, navigation lamp, masthead light, masthead lamp, port lamp, port light, bow side lamp, lighting device, navigation, marine light, marine lamp, marine equipment, marine technology, marine safety, running light, position light, code of lights, international regulations for preventing collisions at sea, antique, galvanised, seahorse, great britain, gb, patent 546575, seahorse logo, trade mark p55933, oil burner, bocock & wilkinson, bocock & sons, george bocock & co. ltd -
Warrnambool and District Historical Society Inc.Metal Plane, C 1900
... This item has no known local significance but is retained as an example of a tradesman’s tool from the past. tradesmen’s tools warrnambool wood plane ‘Stanley No. 78’ ‘Patent D. 6-7-10’ This is a metal tool with a solid base, a large handle, one screw and two wing nuts. ...This plane, used for shaving or shaping materials such as wood, is a Stanley No 78 model. The Stanley Tool Works was a business originally established in U.S.A. in the 1840s. In 1937 Stanley Tool Works set up in Sheffield, England. In 2010 the company merged with Black and Decker and still operates today. Planes are still used today in woodworking.This item has no known local significance but is retained as an example of a tradesman’s tool from the past. This is a metal tool with a solid base, a large handle, one screw and two wing nuts. It is somewhat greasy. ‘Stanley No. 78’ ‘Patent D. 6-7-10’tradesmen’s tools, warrnambool, wood plane -
Warrnambool and District Historical Society Inc.Hacksaw & blade, Early 20th century
... It has a metal frame in a D shape with a metal blade on the straight side affixed with screws. The blade is finely serrated. Attached to the metal frame is a wooden handle. ...It has a metal frame in a D shape with a metal blade on the straight side affixed with screws. The blade is finely serrated. Attached to the metal frame is a wooden handle. ...This hack saw would have been used to cut metal. The blades were interchangeable according to the requirements of the job. The item could have been used on a farm or in industry. This item is retained as a good example of a tool commonly used in past times.This is a hack saw. It has a metal frame in a D shape with a metal blade on the straight side affixed with screws. The blade is finely serrated. Attached to the metal frame is a wooden handle. This hack saw also has an extra blade attached to the fixed blade with a piece of wire flex. The metal is somewhat rusty and the wooden handle is worn. vintage hand tools -
Warrnambool and District Historical Society Inc.Trophy, W&D United Friendly Benefit Quoits 1933, 1933
... This is an electro plated nickel silver cup with two side handles, a short stem and a round silver base. An inscription is on one side of the cup. The cup is much stained. W&D ...This is a trophy awarded by an association of Friendly Societies in Warrnambool in 1933. Friendly or Benefit Societies have operated in Warrnambool since 1860 when the Manchester Unity Independent Order of Oddfellows Lodge was formed. Benefit societies such as this were set up mainly for social reasons and to assist members in times of sickness or to provide insurance in case of illness or hardship. Other societies had specific aims such as the promotion of temperance or allegiance to a particular church or country. The Australian Natives Association (A.N.A.) the winner of this trophy was set up in Warrnambool in the late 19th century and it was an active society with regular meetings, discussion groups, lectures and campaigns for the social justice issues of the day. The A.N.A. in Australia was influential in promoting nationalism and campaigning for Federation. The A.N.A merged with the M.U.I.O.O.F some years ago and operates today as the benefit group, Australia Unity. The trophy won by A.N.A. in 1933 was for quoits, a popular indoor game in the 1930s and still played today, mainly on social occasions. This trophy is of interest as it dates from the 1930s and is connected with the Warrnambool Friendly Societies of the time and especially the Australian Natives Association (A.N.A.)This is an electro plated nickel silver cup with two side handles, a short stem and a round silver base. An inscription is on one side of the cup. The cup is much stained. ‘Warrnambool & District United Friendly Benefit Societies Association Quoits 1933 Won by A.N.A.’friendly societies warrnambool, australian natives association warrnambool -
Bendigo Military MuseumEquipment - AIRCRAFT LANDING PADDLES, Penman & Morrison, 1943
... Bendigo Military Museum 37 - 39 Pall Mall Bendigo goldfields Passchendaele Barracks Trust Aircraft Landing Paddles WW2 “Penman & Morrison 1943 D (arrow up) D” Two identical Paddles - wood, brown, square shaped with wooden handle. Round dark glass disc in centre insert. ...Two identical Paddles - wood, brown, square shaped with wooden handle. Round dark glass disc in centre insert.“Penman & Morrison 1943 D (arrow up) D”passchendaele barracks trust, aircraft landing paddles, ww2 -
Kiewa Valley Historical SocietyPhotographs x 2- D Reids home at Mill Park 1973, 2/12/1973
... handled by R. Goldsbrough and was claimed to come from sheep descended from stock imported in the 1820s from George III's flock. Going into politics, he held the Legislative Assembly seat of Murray from October 1859 to May 1862. David Reid was a highly regarded grazier and local politician who was significantly involved in settlement around the Yackandandah area. Photo demonstrates ongoing interest in the local history of the area and its early residents Clare Roper 1. Handwritten in black ink under photo 'D ...David Reid (1820-1906) was a pastoralists and politician. He left school at 16 and after meeting the overlander John Gardiner he decided to look for land south of the Murray River. Equipped by his father with some 500 head of cattle, 2 bullock wagons and teams and 6 assigned servants, he reached the Ovens River on 8 September 1838. David settled at Currargarmonge, near Wangaratta. At the end of 1843 he took up land near Yackandandah. In 1847 he took up a section of the family run of which Woorajay (Wooragee) formed a part. He built the first water driven flour-mill in the district on his Yackandandah run in 1845; his woolclip of 1848 was one of the first to be handled by R. Goldsbrough and was claimed to come from sheep descended from stock imported in the 1820s from George III's flock. Going into politics, he held the Legislative Assembly seat of Murray from October 1859 to May 1862. David Reid was a highly regarded grazier and local politician who was significantly involved in settlement around the Yackandandah area. Photo demonstrates ongoing interest in the local history of the area and its early residents2 colour photographs mounted together on buff card 1. Man and 2 children (unidentified) standing outside the remains of the Reid home. 2 Dec, 1973 2. Group of unidentified people on a tour of the old homestead of D. Reid. 2 Dec, 19731. Handwritten in black ink under photo 'D. Reid's home 1845. At Mill Park. 2 Dec 1973 2. Handwritten in blue ink under photo 'Snapshots Clare Roper"clare roper -
Kiewa Valley Historical SocietyProjector
... D/C/ England London. Above this label is : Lamp 400 Watts Max.. 9039 is printed in silver on the side. Inside bottom of lid: Cabinet by Raddports Pty. Ltd. / NSW / Leatherette Dark brown box with lid and clip fastener. The lid has a handle ...Possibly early 1950sDark brown box with lid and clip fastener. The lid has a handle at the top.Lid & inside of box lined in red velvet. There is a separate narrow compartment for the reel. There is an electric cord and 3 papers. The reel is dark grey steel. The cord is brown rubber and very long. At the front is an attached plastic label with a switch in the centre. There is a black, red and gold disc with a Bell and Howell guarantee. A Registration card indicating model 606 & Serial no. 9039 and another card with a Safety message in 8 languages.On the base: G.B. Bell & Howell / 8 mm projector / Model 606 / 110-250 / volts / 5 Amps A/C/ or D/C/ England London. Above this label is : Lamp 400 Watts Max.. 9039 is printed in silver on the side. Inside bottom of lid: Cabinet by Raddports Pty. Ltd. / NSW / Leatheretteprojector, g. b. bell & hovell
