This post drill press has been made by Melbourne business, Dawn Manufacturing Company. It can be operated manually or by a pulley driven flywheel, with the aid of an engine connected to a power supply. In the late 1800s early 1900s a drill press like this would have been driven by steam from a boiler, the main power source for manufacturer’s power at that time. Dawn’s Golden Anniversary 1917-1967 Catalogue describes this model 611 drill as … “Ruggedly constructed with accurately reamed bearings. The coupling between the main spindle and feed screw engages the full circumference of the spindle, and embraces a ball-bearing thrust race. The pillar, as in all “Dawn Drilling Machines” is a solid bright steel bar, in place of the usual light tubing. Adjustable automatic feed.” And “F. & l. Pulleys extra, if required”. DAWN MANUFACTURING CO. The Dawn Manufacturing Co. was founded in Coburg, Melbourne, in 1917 by the four Blake brothers, who were all engineers. After World War I Dawn was supplying drills Australia wide and the company was growing at a healthy rate. During the depression they remained busy, with employees working 60-80 hour weeks. Dawn was contracted to supply vices and clamps to the Australian Defence Department and munitions factory during the World War II. - 1959 the company was taken over by G.N. Raymond Group. - 1967 the Dawn Manufacturing Co. had distributors in Australia and overseas, including USA, Canada, New Zealand, Asia and the Middle East. - 1973 the Siddons Ramset Limited acquired Dawn. - December 1991, Dawn became a unit of the United States owned Stanley Works Pty. Ltd. - November 1998 Dawn became 100 per cent Australian owned. The drill is a typical tool of a blacksmith, cart wright, wheelwright and garage business. It is an example of the tools of the blacksmiths’ trade in Victoria in the early to mid-20th century.Post type drill press machine with gear driven flywheel. Drill press is attached to a post and is fitted with a pulley belt and will run at a speed of maxim 200 r.p.m. The machine can also be manually operated. It has an aperture in the centre, a chuck, for the drill bit and has two metal handles at the centre, on the right hand side. Gear ratio 2:1 main drive, 6" diam, 3:1 reduction gear. Made by Dawn of Melbourne, Australia. Model No. 611, Code No. 9157"DAWN MFG COY”, “MELB. AUSTRALIA", " 611"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, blacksmiths, blacksmith’s drill, blacksmith tools, dawn drill model no. 611, dawn drill code no. 9157, dawn manufacturing coy melbourne, dawn manufacturing coy coburg, dawn post drill, drilling machine, drill with gear driven flywheel, forging tool, metal working tool, post drill, steam powered drill, trade tool, warrnambool district 1900s

This drill once belonged to Goodall and Sons, who were blacksmiths in Terang. The smith was called upon to do a variety of work. In the early 1900s he was often the nearest person to be able to perform an engineer’s services for many miles around. The Dawn Ball-bearing Post Drill no. 611 is described in McPherson’s Catalogue as a “drilling machine with adjustable automatic feed, with improved Dawn coupler and ball-bearing thrust’. The heavy design of the flywheel enables it to maintain momentum” and is “fitted with pulleys for belt drive if desired” The hand crank drives an automatic feed to work off a cam-follow system opposite a large wheel. Made by Dawn Manufacturing Co. Australia 1920-1950. DAWN MANUFACTURING CO. Dawn Manufacturing Co. was founded in Coburg, Melbourne, in 1917 by the four Blake brothers, who were all engineers. After World War I Dawn was supplying drills Australia wide and the company was growing at a healthy rate. During the depression they remained busy, with employees working 60-80 hour weeks. Dawn was contracted to supply vices and clamps to the Australian Defence Department and munitions factory during the World War II. In 1959 the company was taken over by G.N. Raymond Group, then in 1973 the Siddons Ramset Limited acquired Dawn. In December 1991, Dawn became a unit of the United States owned Stanley Works Pty. Ltd. In November 1998 Dawn became 100 per cent Australian owned. HENRY GOODALL & SONS Henry Goodall (1870-1936) was proprietor of garages as H. Goodall & Sons Pty. Ltd., at both Terang (McKinnon and High Streets) and Mortlake (Dunlop Street). His business was in operation in at least in 1916 and perhaps well before, considering the date of the tyre bender and its use for wagons with wooden wheels. It was still in operation in 1953, chasing up debtors in Mount Gambier Court. Amongst the employees of H. Goodall & Sons Pty. Ltd. was Ernie Entwistle, a blacksmith (a soldier who died in 1916 ) and Alfred Hodgetts, radio expert (killed in a fatal accident in 1943, when he was in his early 30s ). Henry Goodall was involved in the community as a Justice of Peace, a deputy coroner, President of the Mortlake Hospital, trustee of the Soldiers’ Memorial Hall, and as a prominent Freemason. He and his wife had two sons (Charles and John) and one daughter (Mrs. Chas. Newton, of Skipton). The drill is locally significant as it was used by a local company in Terang and Mortlake in their blacksmith, wheelwright and garage business. It is an example of the tools of the blacksmiths’ trade in Victoria in the 1920s-1950s.Dawn Ball-bearing Post Drill no. 611, made by Dawn of Melbourne, model no 611. Hand operated drill press. Self-feeding blacksmiths’ drill-press. This drill once belonged to Harry Goodall & Sons, blacksmiths of Terang. Dated 1920s-1950s. Gear ratio 2:1 main drive, 6" diam, 3:1 reduction gear. "Dawn", "Melbourne"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, h. goodall & sons of terang, terang blacksmith, h. goodall & sons pty ltd, mortlake, ernie entwistle blacksmith, alfred hodgetts radio expert, charles goodall, john goodall, mrs. chas. newton nee goodall, terang 1900s, warrnambool district 1900s, post drill, blacksmith’s drill, dawn post drill, dawn ball-bearing post drill no. 611, blacksmiths, dawn of melbourne

This hat and hat box was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. McDade is the surname of Dr Angus’ daughter Berry (Berenice) McDade nee Angus. This had belonged to her father Dr William Roy Angus, Surgeon and Oculist (1901 –1970), who wore it on the ship T.S.S. LARGS BAY when travelling from Australia to Scotland for extended studies to be a “Fellow” of the Royal College of Surgeons in Edinburgh in the 1929. This bicorn cocked hat was worn with the narrow points towards front and back. It is decorated with flat gold braid or ‘lace’ with a geometrical design. Regimental lace was worn on the uniform and headdress of regimental officers in the 19th century. Gold lace chevrons were worn on coats to signify rank. Drummers and Foot Guards also wore regimental lace on their garments to distinguish them from other military personnel. In the late 19th century the English and Welsh infantry officers’ uniforms displayed a rose-pattern lace. The gold bullion and underlying crimson ‘eyes’ have been used to signify the rank of the owner. The crimson eyes were used for military, blue eyes for naval personnel. Different numbers and colours of the bullion and eyes may have been used to represent different military ranks. The Regulations specify nine tassels and eleven underlying eyes but there could have been variations. We have not yet been able to identify the rank for this particular hat. The gold button’s emblem has a cross with five stars, a crown, and the motto “AUT PACE AUT BELLO”, translated “either in peace or in war”. Museum Victoria has a similar button and writes that buttons with this design were used in the nineteenth century by the Victorian Volunteers. The Australian War Memorial Curator of Military Heraldry advised Museum Victoria that these buttons dated from 1880-1892 and were worn by regular, unranked soldiers. The Australian War Memorial has a hat that is very similar in design, described as an “Artillery Staff Officer’s cocked had with plume, worn by Volunteer Artillery Staff in the Victorian Colonial Military Forces”. That hat is different in that it has a plume and the braid and button are silver. Berry MdDade, the donor, has used the hat many times as a dress-up hat but doesn’t know the origin of it. The hat seems to fit the design of the Staff Officers in Victorian Volunteers in Colonial times, but the button on this hat was used for unranked volunteers. Also, military uniforms usually have very clear manufacturer’s labels, as they are made by reputable companies under contract to the Defence Department. The manufacturer’s mark is not discernible on this hat. The origin, original wearer and use of this particular hat is unclear. The military bicorn cockade hat belonged to Dr William Roy Angus and is part of the W.R. Angus Collection. It is significant for still being located at the site where it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Black bicorn cocked hat and case. It appears to be part of a 19th century Colonial full dress military uniform. The long, narrow crescent-shaped hat is made of beaver fabric and the crown is lined with crimson silk and finished with a hand stitched leather sweatband. On one flat side there is a pleated black silk, lace cockade woven in the pattern of oak leaves and acorns. The cockade is overlaid with a double row of gold lace braiding secure with a Victorian Volunteer’s gold button. Wide diagonal bands of black lace braid trim are on each side of the gold braiding. The other side of the hat is plain. The front and back points of the hat each have seven gold bullion tassels with nine underlying twists of crimson ‘eyes’. The fitted metal carry case has a catch and a metal plaque on one side. The button bears a crown and cross with five stars and a motto. Inside the hat is a white name tag with clear adhesive over it, with black printed text with the name “Mc Dade”. The hat is part of the W.R. Angus Collection. The hat has no maker’s marks although there is a darker colour in the centre where there could have been a label. Inside the hat is taped a printed label; “Mc DADE 801 1032” Button’s emblem- a cross with five stars, under a crown, all within a buckled belt with the motto “AUT PACE AUT BELLO”. The plaque on the case has no legible marks. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, t.s.s. largs bay, berry mcdade, 19th century colonial military uniform, artillery staff officer’s cocked had, victorian volunteers, victorian colonial military forces, colonial militia, aut pace aut bello, cocked hat, cockade hat, bicorn hat, military bullion, oak leaves and acorns pattern, gold bullion tassels, military heraldry, w.r. angus collection.

This cutlery set mirrors older examples held in the collection (K04) and may have been manufactured as recently as the 2000s. The manufacturer's name "GROSVENOR" and the defence symbol of the broad arrow indicates that the equipment was produced by an external company.This set is representative of a typical set issued to contemporary servicemen and women and as such, has social significance as a ubiquitous relic of service. The set has strong interpretive capacity, being able to draw on issues of equipment, food, technological shifts over time. The set also represents a shift in defence equipment production from government-run manufacturing, with the Australian Government Clothing Factory and Australian Defence Apparel etc., to outsourced contracted production with existing manufacturers such as Grosvenor, an established cutlery manufacturing company.Three piece fork, knife and spoon set held together by a flat headed pin on the knife handle which clips into corresponding holes on fork and knife handles. Handles are curved (concave) in centre. Spoon has engraving "[broad arrow] GROSVENOR 381"; Fork has engraving "[broad arrow] GROSVENOR 381"; Knife has engraving "[broad arrow] GROSVENOR 3".cutlery, knife, fork, spoon, food, equipment, ration

Seven unclaimed letters from Connelly & Tatchell, Solicitors, Sandhurst and Connelly, Tatchell & Dunlop, Barristers & Solicitors, Bendigo. Letters in the name of - J. McCarthy Senr., Axe Creek, re fencing land at Axe Creek, dated Sept 26 1891; Mr. Richards, Miner, New Chum, dated 16 Feby 1888, re perusing summons for assault and taking instructions for defence; Mr. James Baker, High Street, Sandhurst, re Attending Mr. Hopkins with respect to contract, dated 3 Nov 1886; Herbert Stokes Fernshaw, re Coffee Palace, St. Kilda, re appearance, letters and advice, dated Sept 11, 14, 16, 28, 30, Oct 5 and 6 1891; Mrs. A. Williams, c/ Mrs. Pinder, Carpenter St. Bendigo re Divorce, dated Dec 1900; Mr. Joseph Metcalf, Mining Manager, Gapsted, re Mortgage, dated 1901, has pink Return to Sender ink stamp; Mr. Gardner, Breen Street, Quarry Hill, re Opie, dated Nov 1901. Four letters have mauve Victoria Two Pence Stamp Duty stamps, one has no stamp, one has a red Victoria One Penny Stamp Duty stamp and one has a lighter red Victoria One Penny Postage stamp.business, legal, connelly & tatchell, connelly & tatchell collection - document, connelly tatchell & dunlop, j mccarthy senr, mr gardner, joseph metcalf, mrs a williams, mrs pinder, herbert stokes fernshaw, james baker, mr hopkins, mr richards

A cream colouredmanual with the Department of Defence and logo in green. There are four coloured photographs of various Centurion tanks. Above the photograps in green ink reads Disposal of Centurion Tanks and Associated Spares and Equipments. Under the photographs also in gree reads Contract Documentationmilitary equipment, sale of centurion mk2 tanks

M1 Steel helmet used onboard HMAS Kanimbla. These M1Steel helmets were first issued in 1941 to the United States Armed Forces. They were adopted after the Korean War by the Australian Defence Force. In the 1990s they were replaced by the Kevlar based Personnel Armour System-Ground Troop (PASGT) type helmet. However, as evidenced by this helmet, some M1 Steel helmets were not replaced in-service by the PASGT helmet and survived into the early 21st Century. Interestingly, the Nato Stock Number (NSN) printed on the inside of the helmet liner indicates that this helmet was made for a Bulgarian contract, as evidenced by the NSN National code of 50 in the second group of numbers in the stock number. HMAS Kanimbla (LPA-51) was built for the United States Navy as USS Saginaw and was launched on 7 February 1970. Kanimbla was commissioned into the Royal Australian Navy in August 1994. Kanimbla was heavily involved in Operation Slipper conducting a variety of tasks such as patrol, mine recovery. During Operation Slipper, Kanimbla also conducted 27 compliant boardings and 23 non-compliant boardings in the Persian Gulf in 2001-2.Standard issue United States M1 pattern steel helmet, olive drab in colour with liner. On the inside of the liner '8415-50-753-5792' is printed in ink. The chin strap is made of webbing and has its metal claps attached for doing it it.8415-50-753-5792helmet, vietnam, protective helmet

Commonwealth of Australia, Department of Defence of National Development, Division of National Mapping Specification. This is a Specification for Aerial Photography acquisition and is written for civilian contract work.8 x A4 poor photocopies of typed pagesroyal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr

The hearing of the case of John T. Burns, retired railway employee, of Buckley Street, Essendon v. Philip Cooney, licensed victualler, was concluded in the Supreme Court of Victoria (Bendigo) in June 1921. John sued the defendant for a specific performance of contract regarding the sale of ingoing furniture, etc., of the Limerick Castle Hotel, in Williamson Street, Bendigo. He also claimed the profits of the business from 21 February last to the date of possession. Burns also applied for an injunction restraining the defendant from disposing of the lease, licence and furniture of the hotel and premises to anybody else. The defence was that no agreement had been made between defendant and plaintiff for the sale of the hotel lease, although several attempts had been made to bring them to an agreement. Mr Cooney had authorized Mr. J. F. Kelly to sell the ingoing for £750. Burns had offered £650, but the defendant refused to accept that sum. The jury returned a verdict in favour of plaintiff. Judgment was deferred, pending an appeal, it was again heard by the High Court (Melbourne) and the onto the High Court of Australia (Sydney) on a point of law. The legal principle determined by this appeal is of great importance to buyers and sellers of landed property establishing the rule of law: that a house and land agent cannot, safely sell such property without the authority of the owner in writing, signed by such owner. It appears that the hotel-owner's agents had organised a sale to of the hotel along with furniture etc. to John Burns. The owner of the hotel Philip Cooney then objected to the sale of the furniture, although at some stage John Burns offered him 650 pounds to cover the items. The appeal came up for argument before the High Court at its Melbourne sittings on February 20 1922 the hearing extending over four days. Mr. Charles Gavan Duffy (instructed by Messrs. Quick and Luke Murphy) appeared for the appellant, and Messrs; Cohen and Robertson (instructed by Messrs. Macoboy and Taylor); for the respondent. The last court of appeal, the High Court in Sydney reserved its decision, as follows: The Appeal was allowed, with, costs. Judgment to he entered for the defendant Philip Clooney. The Deposit of £50 to be returned to the defendant.48 Pages - A Court Case involving the Limerick Castle Hotel in Williamson Street, Bendigo - Transcript "on appeal from the Supreme Court of Victoria at Bendigo to the High Court of Australia. 1921 No. 4 between Phillip Cooney (Appellant) and John Thomas Burns (Respondent). Quick and Luke Murphy, Chancery Lane, Solicitors for the Appellant. The Document contains seven sections: 1. Statement of Claim 2. Defenant's request for further particulars under the statement of claim 3. Plaintiff's further particulars 4. Defence 5. Reply 6. Judge's notes of evidence taken at the trial 7. Plaintiff's Exhibits - "A" lease, the Trustees, Executors and Agency Company Limited to Appelant "B" Notice of Application to Transfer Licence of Hotel to Responent, testimonials by Messrs. H. Donovan and J. K. Byrne "C" Assignment of Lease, Appelant to Responentbendigo, limerick castle hotel, john burns, philip cooney