Dredge Melbourne was here for only one year 2006 to replace worn out SandPiper. Next dredge was Kalimna. Information from David Holding Gippsland PortsColoured postcard of the dredge "Melbourne" in Reeves channel between Bullock Island and Rigby Island to right of picture Lakes Entrance Victoriaboats and boating, waterways, dredges

Port of Portland Authority archivesFront: (no inscriptions) Back: Priestman Stippert/ Barge Dredging/ Canal (black ink on white sticker, upper left)port of portland archives, dredging, priestman stippert, barge

Painting of five ships at sea, one in foreground is manned. Framed using a small replica life bouy; two crossed flags top centre, one Union Jack flag mid left, one British Naval flag mid right, title 'Oyster Dredging' lower quadrant.OYSTER . DREDGING paintings, decorative life bouys, oyster dredging, fishing, harvesting

Typed note in album describes the photoBlack and white photograph showing PWD dredge WH Edgar with hopper barge during dredging operation at mouth of Mitchell River. Silt jetty at back. Bairnsdale Victoriaboats and boating, dredges

Port of Portland Authority archivesFront: (no inscriptions) Back: North trench - June 11th/ Reclaimation from original harbour dredging (pencil, upper left)port of portland archives, dredging, trench

The dredge 'Wombat' owned by John Carpenter, contractor for stage one of cutting the entrance from the lake through to ocean - Bass Strait. Photo shows channel partly dredged and men on work platform in front of dredge.Black and white photograph showing bucket dredge Wombat removing sand from between piers. Dunes on western side on left, lakes in background, hills of Kalimna and Nungurner in distance. Work platform in front of dredge with workers. Lakes Entrance Victoria waterways, public works, dredging

The Dredge 'Pioneer' brought in to clear sand drift from the Moyne river caused by the South West passage sweeping throughBlack and white photograph of a dredge in Moyne riversea, river, moyne river, south west passage, pioneer, deredge, ship

Dredge Paynesville pump removed in 1992.Colour photograph of former dredge Paynesville at Eastern Wharf, Lakes Entrance, Victoria.jetties, dredging, boats and boating

SS Pioneer was a steam dredging ship which was in service with the Department of Ports & Harbours, Melbourne, Australia, from 1905 to 1950. The Pioneer (aka SS Pioneer) was a steel steam driven pump driven sand dredge. She was built in Glasgow, Scotland for the Victorian Dept of Board of Works in 1905. The Pioneer was scuttled on 9 March 1950.Half model of suction dredge Pioneer in glass display casemodel, sand dredger, ss pioneer, port of melbourne

Suction dredge W H Edgar in process of dismantling 1936Black and white photograph showing PWD dredge W H Edgar moored at Paynesville Slipyard. Smaller boats moored at bank in background. Tall trees at back. Few people on board dredge. Paynesville Victoriaships and shipping, waterways, dredging

View of the entrance taken from a bend in the Princes Highway showing three cars parked at the viewing area beside the highway. Boat and dredge in waterway below highway dredged sand in Bullock Island extension, dredge Mathew Flinders working outside the entrance Lakes Entrance Victoria. Also two black and white photographs taken of Entrance from Jemmys Point taken 1960 c Black and white photograph of the entrance taken from a bend in the Princes Highway showing three cars parked at the viewing area beside the highway. Boat and dredge in waterway below highway dredged sand in Bullock Island extension, dredge Mathew Flinders working outside the entrance Lakes Entrance Victoria. Also two black and white photographs taken of Entrance from Jemmys Point taken 1960 c waterways, vehicles, jemmys point lakes entrance

Grampians Halls Gap & Stoney Creek dredge. circa 1909 . 2nd man from right is Alfred D'/alton; 4th from right is James OliverPhoto shows eight men seated, two standing. 3 tents in background.Grampians Hallls Gap & Stoney Creek dredge circa 1909 written on backpeople, d'alton, water supplies, channels

These plans are line drawings by the State of Victoria for a Suction Hopper Dredge, which used a suction pump to bring up material from the bottom of a body of water. The plans are contained in a box from the Public Works Department, Ports and Harbours Division in Melbourne, which in the year 1910 was responsible for the dredging operations of coastal ports and harbours, and inland waterways. The stamped signature is that of Arthur Edward Cutler, Chief Engineer, Public Works Department of New South Wales. The steel steamer Matthew Flinders was constructed by Morts Dock & Engineering Co Ltd in Sydney, New South Wales. Identified as Ship No. 40 by the ship builders, this dredge, had twin screw engines that were made in Sydney. Its gross tonnage was 1180. It was launched on July 15th, 1916, and registered by the owner, Department of Public Works in Victoria, at the Port of Melbourne in 1917. Unlike bucket dredges, the Matthew Flinders did not use permanent moorings but instead had bow and stern anchors. It travelled forward on the bow anchor, taking up a strip of even-depth wilt from the bed below. A local newspaper noted that the Matthew Flinders has many advantages that were especially useful for its work at Warrnambool. Warrnambool Harbour had been experiencing silting and sanding for many years. The problem continued even after the construction of the Breakwater in 1890, which was overseen by New Zealand engineer Arthur Dudley Dobson. Melbourne’s Department of Ports and Harbours sent the new Matthew Flinders to dredge the heavy silting in the Warrnambool Harbour in May 1919. This work was previously done by the smaller dredge, the Pioneer. However, after a month of work, the Matthew Flinders was returned to Melbourne for alterations to make it suitable for work in the heavy seas it experienced at Warrnambool. Both dredges were sent up from Melbourne when required over the years to periodically attend to the silting in the Harbour, but the Matthew Flinders was preferred because of its efficiency. It was still dredging the Harbour even in July 1938. The ship’s original master was J G Rosney. In 1923 the master in charge was Captain Dunbar. In 1930 the dredges were no longer required as the Harbour was no longer suitable as port.These plans are significant for their close association with the suction hopper dredge, the Matthew Flinders I, which was call upon often to remove the silting of Warrnambool Harbour and allow shipping to continue in the Port of Warrnambool until 1930, when the Port of Warrnambool ceased to be suitable as a port. The work done by the Matthew Flinders is significant for its association with the Warrnambool Breakwater and the on-going issues with the silting of the Harbour. Plans with line drawings for the suction hopper dredge Matthew Flinders, rolled, in open-top wooden box. Created for the Public Works Department, Melbourne, Victoria. Stamped with signature and dated November I, 1911. Inscriptions: label on box, handwriting on box, drawings and outer layer of paper. Freighted by 1 Star, New Zealand Express Cargo.Signature stamp “A E Cutler” Date stamp “NOV 8 – 1911” Printed on one page “STATE OF VICTORIA / SUCTION HOPPER DREDGE / GENERAL ARRANGEMENTS OF MAIN ENGINE ROOM / SCALE 1/2 IN = 1 FT.” Label on box "1 [star symbol] / THE NEW ZEALA- - - / EXPRESS CAR - –“ Handwritten on base “PUBLIC WORKS / DEPARTMENT / - - LBOURNE” Handwritten in pencil on cover paper “MATTHEW Flinders”flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, plan, line drawing, dredge, pioneer, steel steam ship, twin screw engines, a e cutler, arthur edward cutler, chief engineer, public works department, new south wales, nsw, 1911, state of victoria, suction hopper, main engine room, public works melbourne, warrnambool harbour, lady bay, sanding, silting, breakwater, morts dock & engineering co ltd, j g rosney, captain dunbar, ship no. 40, matthew flinders i, matthew flinders, 1 star, new zealand express cargo

The Argus Melbourne Friday 10 July 1908 QUEENSCLIFF, Thursday. - After a series of successful experiments in dredging the eastern end of the South Channel, the suction dredge Pioneer sailed this after-noon for the Gippsland Lakes, where work awaits her. During operations in the South Channel the dredge worked on a sandy and shell bottom in depths ranging from 35ft. to 40ft. with unqualified success, performing the work much quicker and cheaper than the bucket drudge John Nimmo, which is still employed. Captain Macarthur was in charge of the operations.Brass lock from Port and Harbours suction dredge 'Pioneer' used at the Queenscliff creek entrance door lock, suction dredge, pioneer

May be contract dredge Melbourne built by Birdon, Port MacquarieColour photograph of a contract dredge working off Rigby Island, Gippsland Lakes, Lakes Entrance, Victoria.islands, dredging, ocean

wharf at Bullock Island showing oil rig supply vessel Lakes Tide and dredge Sandpiper at moorings Fishermans Coop building in background Thunderbird at New Works jetty in distance. Taken from dredge April Hamer Lakes Entrance Victoria 1989Colour photograph of wharf at Bullock Island showing oil rig supply vessel Lakes Tide and dredge Sandpiper at moorings Fishermans Coop building in background Thunderbird at New Works jetty in distance. Taken from dredge April Hamer Lakes Entrance Victoria 1989boats and boating, jetties, business, waterways

Wooden stocked anchor was dredged up in April 2004, off Rigby Island, Lakes Entrance, Victoria.Colour photograph showing lakes dredge Sandpiper off Rigby Island, Lakes Entrance, Victoria.dredging, jetties, waterways, islands

dredging of Cunninghame Arm adjacent to the footbridge, flock of seagulls in foreground Lakes Entrance VictoriaColour photograph showing dredging of Cunninghame Arm adjacent to the footbridge, flock of seagulls in foreground Lakes Entrance Victoriaenvironment, waterfront, gippsland lakes

The Melbourne Harbour Trust Commission purchased the steam dredge SIR WILLIAM MATHEWS on 10 October 1941 from the Western Australian Government. Although the dredge was described as a suction dredge it was in fact a bucket dredge. After an overhaul, the vessel was renamed the GEORGE KERMODE and commenced operation in Victorian waters on 22 June 1942. The vessel was hired out to the Port of Burnie in 1945-46 but continued in the ownership of the Trust until 1 April 1976 when it was scuttled by the Department of Conservation, Forests and Lands as part of their artificial reef program. This program resulted in a number of reefs being established in Port Phillip Bay, including one off Carrum containing the wooden steamer URALBA.Timber and brass ship's wheel from center ladder hopper dredge George Kermode (formerly Sir William Mathews). Built Paisley Scotland 1914.noneships wheel, scuttled vessels, artificial reefs, george kermode

1 other photograph 10 x 16 archived.Black and white photograph showing view of entrance, dunes and Bullock Island, buildings and dunes at left, building and jetty and rock groynes on Bullock Island. Vessel near centre may be the Carpenter owned dredge the Wombat. Lakes Entrance Victoria jetties, dredges, waterways

Black and white large format postcard of Kalimna Jetty Gippsland Lakes. It shows the shed on the approach to the jetty and landing, Rigby Island and Entrance in background, steep cliffs at eastern edge of lake. Pioneer Dredge in channel. Lakes Entrance VictoriaKalimna and Entrancejetties, boats and boating, dredges

dredge working on edge of lake below Jemmys Point. Glimpse of houses on Kalimna Heights in distance Lakes Entrance VictoriaColour photograph showing dredge working on edge of lake below Jemmys Point. Glimpse of houses on Kalimna Heights in distance Lakes Entrance Victoriahotels, waterways, gippsland lakes, topography

Kalimna Heights showing development on Bullock Island including Pecks Factory. The Club Spit of dredged sand is acquiring vegetation. April Hamer dredge moored at Port Jetty, new bridge in place Lakes Entrance VictoriaAlso two colour photographs showing dumped sand on Bullock Island taken from Princes Highway lower parking bay June 2000. Donor L P Newspaper number 04209.1 size 10 x 15 cm and 04209.2 size 10 x 15 cm|Two colour photographs of Gippsland Ports Facilities taken from waterway numbers 04208.3 and 04208.4 size 10 x 15 cmColour photograph taken from Kalimna Heights showing development on Bullock Island including Pecks Factory. The Club Spit of dredged sand is acquiring vegetation. April Hamer dredge moored at Port Jetty, new bridge in place Lakes Entrance Victoriaislands, waterways, gippsland lakes

This photograph shows the steam dredge Pioneer working to remove silt in Lady Bay, Port of Warrnambool. The dredge belonged to the Ports and Harbours department in Melbourne. Also in the photograph are two moored vessels, and the Warrnambool Lifeboat shed and Rocket house built on the Warrnambool Breakwater. The Warrnambool Harbour had been experiencing heavy silting and sanding for many years. The problem continued even after the construction of the Breakwater in 1890. The Ports and Harbours' new, larger suction hopper dredge, the Matthew Flinders, was also employed in May 1919 to remove the heavy silting in the Harbour. Both dredges were sent up from Melbourne when required over the years to periodically attend to the silting. The Matthew Flinders was still dredging the Harbour even in the 1930s. (The ship’s original master was J G Rosney. In February 1922 Percy Taylor from Ports and Harbours joined the Matthew Flinders as a Mate. 1923 the master in charge was Captain Dunbar. In August 1926 Percy Taylor was appointed as her Master and was later transferred to the Pioneer as Master in 1933.) 1930 the dredges were no longer required as the Harbour was no longer suitable as a port. However, one source notes that the Matthew Flinders was still dredging the Harbour in 1938.This photograph is significant for its association with the Port of Warrnambool, the Warrnambool Breakwater, and the issue of the silting in Lady Bay. The photograph is significant historically as it shows a point in time when efforts were employed to keep the Port of Warrnambool functioning, allowing shipping activities to continue operating. The need for dredging in the Warrnambool Harbour was a serious and ongoing problem, as silting continued to happen after a series of measures were taken to try and resolve the issue. Eventually, the Harbour could no longer function successfully as a port.Photograph, black and white, showing two similar images and printed together. Images of Lady Bay, Warrnambool, the dredge 'Pioneer' on the left, ships and the Warrnambool Lifeboat and Rocket House on the right, beside the Breakwater. Ca. 1900 to 1930."BL016"flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, dredge, mathew flinders i, warrnambool harbour, lady bay, sanding, silting, breakwater, captain dunbar, ports & harbours, marine technology, percy taylor, matthew flinders, pioneer, dredge pioneer, lifeboat house, rocket house

timber piers at Entrance showing dredge Wombat and rail line to Western Pier. No machinery on either pier. Person standing on sand dune beside rail line Lakes Entrance VictoriaBlack and white photograph of timber piers at Entrance showing dredge Wombat and rail line to Western Pier. No machinery on either pier. Person standing on sand dune beside rail line Lakes Entrance Victoriaislands, waterways, piers, gippsland lakes

Plate created to celebrate the centenary of the Melbourne Harbor Trust beginning operations. Presented by Australian Dredging and General works Pty. Ltd. Large blue and white Dutch Delftware ceremonial plate with image of two ships, one sailing ship and the Abel Tasman at sea. The Melbourne Harbor Trust shield features above the ships. "The Melbourne Harbor Trust Commissioners/ 1877 Centenary 1977/ 1877 1977/ Abel Tasman" On reverse: "Presented by/ Australian Dredging and/ General works Pty. Ltd./ Delfts blauw/ Hand painted / Made in Holland/ Wp." Sticker attached "43196 B" "PMA 0166/1"