Two "R" Class Steam Train Engines with passenger carriages passing Stawell Railway Station.Black and White photo of "R" Class Steam Engines passing Stawell Railway Station. The two Steam engines Locos with Passenger carriages. c 1940. stawell, railway, transport

Set of six cardboard cards modelsof valve and piston motions of high speed steam engines. Produced by Thomas Jomes and T Gilbert Jones. Printed document titled: Working Models of High-speed Steam Engines, Series No. 3 by T. Jones, M. I. Mech. E. and T. Gilbert Jones, M. Sc., Wh. Sc., A. M. Inst. E. E. There is a reduced facsimile of Model No. 6. The 'Willans' Central-Valve Single-Acting Compound Engine, a description on using the models, a List of Models, Special Engineering Publications, Working Models and The 'X' Series of Cardboard Models. Also for full particulars sned to UK.education, tertiary, models for engineering students., working models of high-speed steam engines series no 3, westinghouse, belliss, erith, clayton, willans

exercise book with marbled cover. Hand written lecture notes inside. astronomy, steam engines, calculations, italian

In 1898 Arthur Fussell did Mechanics in Mining at School of Mines Ballarat.A small red cloth bound book of 189 pages containing diagrams and illustratins. The cover title was printed in gold. On the inside cover and on the title page is written in pencil Arthur Fussell, 73 Errard St S, Ballaratwannans, engine driver's guide, steam boilers, steam engines, pumps, arthur fussell, steam

Black leather look hard cover book of 588 pagesHand wirtten in blue pen "The property of / Law Praid / S. Townhead Rd / Cotehill" Hand written in pencil ET $15 / 2 vols"

Vertical cylinder steam engine painted black, red and grey. In working order. Large flywheel and pulley on RHS and mounted on a raised concrete base. Belt drive overhead governor.No. "8532" is cast on the LHS of the frame.engines, steam, vertical

ill, p.76.non-fictionA description of the preserved steam locomotives in Victoria (possibly in 1982).preserved locomotives - victoria - history, railroads - victoria - history

George McCulloch was an inspector of machinery for the Western Australia Department of Mines. Brown hard covered book of 452 pages including illustrations and index. Contents include Design; Tail ropes; Winding from Great Depths; Colliery Winding; Electric Winding; Steam engine details, Drims; brakes; Clutches; Safety Devices; Winding ropes; Cages; Skips; Cage Safety Gear, Safety Cages; Cage Guides; Head gearsmining, winding, engines, steam engines, safety devices, winding ropes, cages, safety cages

This is possibly a photograph which records trips made around Victoria of the 'Flying Scotsman' engine which was brought to Australia in late 1980s.A coloured photograph of a steam engine painted blue, black and red travelling under full steam along a rail track.steam engines, the flying scotsman, railways, george evans collection

Steam Rail Engine & 9 workers standing on a Steam Engine. Martin Hayes (Snr.) driver leaning out of cabin. John McInerney left of M. Hayes and below Frank Dunn. The steam engine is under a rail bridge and in the background is a timber building. c1900.Old sepia photo on a damaged mount of 9 railway workers standing on a Steam engine c1900.Martin Hayes (Snr.)stawell railways transport

The K class steam engines were often used on Victoria's regional rail lines taking passengers and goods across the state. A coloured photograph of a stationary steam train on railway tracks with the driver looking out his cabin window and a man walking alongside the train. steam engines

Postcard which has a black and white image of a steam engine and carriages at Linton Railway Station. The R class engine was constructed at the Phoenix Foundry, Ballarat, between 1881 and 1886.Text, reverse: "Boy sitting on engine is Harold Morgan, man wearing bowler hat standing beside engine thought to be Mr Bourke, engine driver, father of Kitty and Lizzie. White house behind station master's cap, weatherboard cottage occupied by Mrs Howe, her daughter Myra and son Billy. Man on station wearing cap thought to be station master, Alec Thompson's father".linton railway station, steam engines, transport, railways

Three photos of Tatura Railway station & one of the Rosella Siding, with steam engines.Three photos of Tatura Railway station & one of the Rosella Siding, with steam engines.

Used at Ballarat School of MinesThe cover is a red brown colour with the title on the spine and the publisher Longmans & Co printed near base of the spine. The book has 496 illustrations throughout with some pull out plates. Pages 514.On the inside cover it is stamped with The School of Mines Ballarat and written in pencil is 1914 and E K.compound engines, thermodynamics of gases, properties of steam, temperature-entropy diagrams, superheated steam, steam-jacket, feed-water heaters, crank-shaft, flywheels, corliss engine, steam turbine, condensers, friction of engines, steam-engine, william ripper, steam

Formerly part of the Ballarat School of Mines libraryA blue book with the title printed in gold on the spine, and the publisher "Longmans" printed in gold at the base of the spine. It has 503 illustrations throughout. It has two loose pages of plates in a sleeve inside the back cover and some pull out plates throughout. 841 pagesIt is stamped with The School of Mines Ballarat near the front and back pages, as well as some throughout the book.steam engine, properties of steam, flywheels, condensers, thermodynamic principles, energy diagrams, engine cycles and efficiencies, brake horse-power, steam in the cylinder, multiple expansion engines, valve gears, governors, crank, corliss and drop-valve engines, steam turbines, turbine performance, steam

Book: red covered book, written on front in gold 'Wannan's Engine-Drivers' Guide'. Written in pencil inside front cover : H.R. Attwood, Alice St., Sunshine and in blue pen 'Hrm Grauz' On further page, Hilliaue Grauz, Gibson Street, Warrnambool. Book contains chapters relating to boilers, operation and accidents.A.C. Wannan, Consulting Engineermachinery, engines- steam, wannan's engine-drivers' guide, richardson, wannan, boilers, mining, mines, engine driver, engineman

Book: blue covered book 'The Engineman's Pocket companion' by Michael Reynolds. A practical educator for Enginemen, boiler attendants and mechanics. Second Edition, revised. Published by Crosby Lockwood and co., Stationers' Hall Court, Ludgate hill, 1887. Written in pen inside front cover 'A.E. Richardson, 29 Harrison St., Bendigo ' Pencil equations written throughout book.Michael Reynoldsmachinery, engines- steam, engineman's pocket companion, richardson, boilers, mining, engine drivers, engineman

machinery, engines, steam

Magazine 'Steam Supreme', National Steam Centre, Melbourne. Article on Joel Horwood 'Horwood's Foundry' written by John Horwood, descendant. Joel Horwood JP 1832 - 1900, the pioneer foundry man of the Sandhurst Goldfields. National Steam Centre Melbournemagazine, organization, steam engines, horwood foundry, steam engines at mudgee, joel horwood, bendigo iron works

The Davey Paxman Experimental Steam Engine was purchased as the result of a bequest from Thomas Bath. The 'substantial sum' was used to build an Engineering Laboratory. The Ballarat School of Mines Council minutes of 08 November 1901 record: - Plans for [the] proposed building were submitted ... and ... it was resolved that a temporary building for an Engineering Laboratory be put up.' This laboratory, as an existing building, is first mentioned in the Ballarat School of Mines President's Annual Report of 1901, presented on 28 February 1902, reporting 'the erection of a building 67ft long by 33 ft wide' This report also lists all the equipment that would be accommodated in the Engineering Laboratory, including the experimental steam engine and boiler. The experimental Davey-Paxman steam engine arrived in Ballarat towards the end of 1902. The Engineering Laboratory was opened on 14 August 1903 by His Excellency Sir Sydenham Clarke. This engineering laboratory remained in use till about 1945. By 1944 preparations were under way at the Ballarat School of Mines to expand existing facilities, to be ready for the influx of returned soldiers. A new Heat Engines laboratory was built, this time of brick construction, replacing the previous corrugated-iron shed. In the early stages the steam engine was used to drive an overhead transmission shaft for machinery in the adjacent workshop. Later the steam engine was moved to a space that became the Heat Thermodynamics Laboratory. At the end of 1969 the engine was relocated to the Thermodynamics Laboratory at the then Ballarat Institute of Advanced Education (BIAE) Mt Helen Campus. It was donated to Sovereign Hill in 2006. According to the research of Rohan Lamb in 2001 around five experimental steam engines were made by Davey Paxman, and three of these had similar configuration to the Ballarat School of Mines Steam Engine, however, each of these was also unique with different valve arrangements. The list, which was on a scrap of paper in a folio held in the Essex Archives, confirmed that one was sent to India. The Ballarat steam engine can be dated to late 1901 to early 1902. Zig Plavina was responsible for moving the steam engine to Mount Helen, and worked on it as a technician for many years. He observed the following: * The condenser is driven by the low pressure engine. * The following arrangements are possible: i) the high pressure engine alone, exhausting to atmosphere. Condenser not used, crankshaft flanges not coupled. ii) crankshafts coupled, mains pressure (120 psi) steam supplied to high pressure engine, partially expanded steam delivered to low pressure engine (Tandem operation). Choice available re exhaust steam: either to the condenser or to atmosphere. iii) crankshafts not coupled, reduced pressure steam supplied to low pressure engine. Exhaust steam - either to the condenser or to atmosphere. * Valve arrangement - a choice of Pickering cut-off or throttle governor. On low pressure engine - throttle governor only. Black and white photograph of an experimental steam engine which was produced for the Ballarat School of Mines. It was designed for experimental purposes, such as testing of efficiency, etc. The laboratory which housed the steam engine was lit with gas lighting. davey paxman experimental steam engine, model steam engine, davey paxman, steam, thomas bath, thermodynamics