These flooring nails and lock came from a railway cottage at 2 Ethel Lane, Wodonga. One is a diamond-headed timber nail and the others are simple round headed nails. They were designed so the head of the flooring nail when driven into the Baltic pine flooring was covered over by the timber so was not visible. The cottage was built about 1890. It featured many items labelled with the emblem of Victorian Railways. The house was demolished in November 2006. This lock is significant because it came from an early railway home in Wodonga.Flooring nails - one diamond headed timber nail and four other nails from railways cottage at 2 Ethel Lane, Wodonga. Door lock and striker plate from a railway cottage at Ethel Lane.On Lock - Trademark disc Around edge - REGISTERED TRADEMARK PATENT EXPIRED In centre: Royal Warrant Symbol of Rampant Lion and Unicorn above words NO. 60 JAS CARPENTER PATENTEE On striker plate: VRrailway houses wodonga, jas carpenter locksmith

Colour photograph. Couples dancing in marquee on wooden stage style flooring. Period style dress.entertainment, dance, bendigo old time dance club

Colour photograph. Couples dancing in large building. Some in period style dress. Parquetry flooring.entertainment, dance, bendigo old time dance club

The Mahogany Ship is today regarded as a legend and refers to an ancient wreck that is purported to lie beneath the sand beside Armstrong Bay, several kilometres west of Warrnambool, Its location is currently unknown. For well over a century the mystery of this ship has fascinated Australians because the existence of such a vessel could throw a different light on the earliest phases of exploration of eastern Australia by Europeans. The story is that in January 1836 a party of whalers from Port Fairy travelled to the mouth of the Hopkins River in search of seals. Their boat overturned and one man was drowned. The three survivors were walking the 30 kilometres back to Port Fairy along the coast when, about halfway along, they discovered the wrecked ship in the dunes. It is said that Captain John Mills, who was in charge of the whaling station at Port Fairy promptly visited the wreck with several of his men, including Hugh Donnelly. Donnelly who was the originator of that version of events is now regarded as unreliable. Local history researcher Joan Fawcett believes Donnelly could not have visited the wreck in 1836 because he did not arrive in Victoria until 1841. The "mahogany" description can be traced to a letter from Port Fairy builder, architect and surveyor John Mason and published in the Melbourne Argus in 1876. He said he had seen the hull in 1846 and it "had the appearance of either cedar or mahogany." In 1884 Argus journalist `The Vagabond' wrote that the hull was built of "Spanish mahogany" and six years later Mason wrote another letter saying it might not have been mahogany but red gum or ironbark from New South Wales. He was too late with this new description as the wrecks mahogany tag was here to stay all through the hull was not visible as it had disappeared beneath the shifting sands by 1880. A more reliable account was later presented by the former editor of the Warrnambool Examiner, historian Richard Osburne, who wrote about the wreck in his book History of Warrnambool (published 1887). In it the author remembers to have noticed a wreck in the hummocks between Belfast and Warrnambool, in 1847 or 1848; he stated it was much nearer Warrnambool than Belfast, now known as Port Fairy, going on to state “in fact, it was only two or three miles from the former place, to the west of the big hummock which was supposed to fill Warrnambool Bay with drift sand washed by the Merri River before the cutting was made.” Osburne followed up with a letter to the Port Fairy Gazette on June 25, 1876, during a period of heightened interest in the wreck, although he was unsure of the provenance of the ship he went on to state in his letter. “The old wreck was, in fact, miles away from the Port Fairy beach, and only about four miles from Warrnambool. In the years 1847 and 1848. I have often seen the wreck and I regret to say I do not believe she was a foreign ship at all.”The ship model is significant for its association with the Warrnambool story of what is now referred to as the Mahogany Ship, an ancient shipwreck. The model is significant as it is an interpretation of a Portuguese caravel and possibly associated with the early history and exploration of Southern Australia. The model is a fine example of a hand crafted ship made from plans, not from a kit. Some of the materials used for the model are significant to the Gembrook community in that the timber used is a portion from a 30-meter pine tree that fell onto and destroyed the 120-year-old Gembrook church building. The model is also a dedication to Edward Kermond, who grew up in Warrnambool and claimed to have seen the shipwreck in the dunes when he was a lad in the late 19th century. (See note section of this document for further information on the creator and donation of the subject item).Ship model, an interpretation of a mahogany Portuguese carvel vessel in a glass display case with wood frame and a description plaque. Model is made from dark stained wood. The three masted vessel is fully rigged, with a Portuguese-like flag on mast. Plaque is rectangular, free standing on a pedestal. The model was handmade by Joe Hilder (Senior) in 1999 from flooring obtained from the Gembrook Uniting Church in Victoria. Inscriptions, hand written, under base of case and on plaque.Under base, black felt tip pen “Ship & Case made From / Flooring from Gembrook uniting Church, Flattened in 1999 / By Large Pine Tree.” On plaque, white paint "This interpretation of the Fabled Mahogany Ship was made by Joe Hilder, Gembrook Vic. is displayed in the memory of the late Edward Kermond (Ted) 1887-1973, a Warrnambool son who claimed to have seen the original ship as a child." flagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship model, mahogany ship, mahogany ship story, portuguese caravel, joe hilder, edward kermond, ted kermond, gembrook uniting church, gembrook storm 1999, port fairy whalers, belfast whalers

These nails were made for Walter John Mundy (1868-1944). Often imported nails made for the softer English and North American timbers bent when hammered against the harder colonial woods and so The Mundy family were farmers / settlers in the Snowy River area since c. 1880s. The original Mundy family moved to a land "selection" at Betebolong in the early 1880's from Buchan. It's only over the past century or so that the mass-produced nail has become an inexpensive and common way to join materials. These three iron nails were hand made by an early Orbost settler or blacksmith in the 1880's, using iron, forge and anvil. They are examples of the types of nails used in the 19th century. A rectangular, wooden(athel pine?) board with three hand-made nails glued in fan design to top left corner of section of floorboard. There is a short length of yellow cord attached for hanging. To the right of the nails is hand-written text in black. the nails have irregular shanks and hammer marks on both shanks and heads.right of nails - " Flooring & nails from Walter Mundy's house at Jarrahmond built C.1885. Still in use to this day."mundy-walter hand-made-nails

Colour photograph. Emu Creek Bush Band play in marquee. Couples dancing in period style dress on wooden stage flooring.entertainment, music, bush dance and music club

Colour photograph. Emu Creek Bush Band play in marquee. Couples dancing in period style dress on wooden stage flooring.entertainment, music, bush dance and music club

Colour photograph. Emu Creek Bush Band. 3 men at microphone. Mrs Corry at keyboard. Inside marquee wooden stage style flooring.entertainment, music, emu creek bush band

Colour photograph. People in period style dress linked hands arms crossed over front. Around edge of large hall/ building. Parquetry style flooring.entertainment, dance, bush dance

James Moore and Sons had a timber and saw mill at City Rd., South Melbourne. They employed over 600 men with a wide range of skills, turning out milled timber for building, household items and other cabinetry, the wooden bodies of trams and even what is believed to be the first commercially produced airplane propeller. The site also included a nail making factory. These goods were sold throughout the state before the company went into voluntary liquidation in 1935. James Louis Moore was born in Ireland 12/8/1843 and died in London 3/2/1913 before his body was returned to Melbourne for burial in the family vault in April 1913. The business continued under his sons Walter, Louis and Arthur. Another son, William had disappeared in 1906.James Moore and Sons Timber Yard and Saw Mills Price List for September 1922 and April 1924 listing prices for floorings; Oregon; building hardwood; galvanised iron; linings etc. Four pages.history, bendigo, abbott collection, james moore and sons

A grooving plane was traditionally used for drawer bottoms or for flooring or lining boards.This item is an example of a domestic woodworking tool commonly used before the widespread use of power tools.A wooden grooving plane - no blade.tool woodwork plane-grooving

17.5cm x 12.5cm black and white photograph of the Spicers Paper Manufacturer building. Captured is the inside of the building which has work benched and cabinets. The building is a domed structure, similar to an aircraft hanger and wooden flooring. paper manufacturing, architecture

Photographs show the construction of the concrete flooring and pillars that will hold the elevated stabling track inside the new Southbank Depot shed. Yields information about the construction of Southbank Depot Colour prints with no notes.trams, stabling track, elevated track, southbank, depot

Colour photograph - interior view of construction on a cool storage shed at Narre Warren North. Silver insulation and wooden scaffolding can be seen behind the walls. A wheeled scaffold is on the right side of frame. A rolled up piece of flooring is on the left side of the frame.

The five types of nails include a stamped steel nail made for wooden flooring; four copper nails used for boat building found at various locations on the island; two steel nails removed from the lantern room door during restoration in 2002 which possibly came with the Chance Bros. lantern room kit delivered in 1862; three galvanised steel nails used to pin the railway track to sleepers and decking on the jetty (the rail track carried a small trolley for unloading stores from supply ships); and a square copper nail found on the rocky shore on Tullaberga Island close to the location of the Monumental City wreck of 1853. The huge American steamer, Monumental City, was wrecked on 15 May 1853. Built in 1850, the ship was the first screw-propulsion steamer to cross the Pacific and was heading back to Sydney after dropping off Californians heading for the Victorian goldfields. Thirty-seven lives were lost, including the owner of the ship, Peter Strobel. A medal was awarded by Sydney residents to Charles Plummer who swam ashore with a line from the wreck. The tragedy renewed the urgency for a lighthouse on Gabo Island, and in 1862 when this was achieved an obelisk was erected as a memorial to those who perished. That year, Victorian PWD architect and designer of the lightstation buildings, Charles Maplestone, gave the following instructions: ‘You may remove the remains of the poor unfortunate shipwrecked of the Monumental City to the site on Gabo you propose but take scrupulous care to collect all the remains and inter them decently under the monument. Pray save any relics’.246 Heritage Victoria has 39 artefacts listed under the Historic Shipwrecks Act (S473) with a clear provenance to the Monumental City. While the copper nail has no documented provenance, it still has contributory significance as part of a diverse assemblage of relics that help to interpret the history of the Gabo Island Lightstation and the numerous shipwrecks that have occurred in its vicinity since the mid nineteenth century..1 Steel nail - flat. Stamped. This type of nail was used for secret nailing of flooring. Source of this nail is unknown. .2 Copper nails. This type of nail was used for boat building. Found at various locations around island. .3 Steel nails. Extracted from lantern room door during restoration 2002. .4 Galvanised steel nails. Used to pin railway track to timber sleepers and decking on jetty. Rail track carried a small trolley used during the unloading of stores from supply ships. .5. Copper nail square. This nail was found on the rocky shore line on Tullaberga Island close to the location of the wreck of the "Monumental City" wrecked May 1853. Nail found in June 2000.

Black and white photographImage shows a section of the front wall of the cottage being dismantled. Typed below photograph: "Ringwood miners cottage 1873 - formerly No. 367 Maroondah Highway opposite Civic Centre. Pictured during dismantling May 1975 showing original hand split internal paling walls and flooring nailed to saplings laid directly on the ground.:

A flooring clamp (or cramp) is used for holding tongue and groove floorboards in place whilst laying a new floor. The ratchet handle is used to apply horizontal pressure to hold boards firmly in place until they are secured. “The General and Commercial Directory of the Borough of Birmingham, and six miles round; including Wolverhampton, Bilston, Walsall, West Bromwich” published in 1858 lists William Bissell as an ironmonger in Union Street, Wolverhampton. In the catalogue for the 1862 London Exhibition, three items manufactured by William Bissell were listed, including:- “BISSELL'S PATENT FLOORING CRAMP. The force of this cramp is fully equal to 1 ton. It is adapted to joists from 2 to 4 in. and is the most expeditious and easy in working of any cramp in use.” In the 1864 edition of “Williams's Manufacturers' Directory, for London and Principal Market Towns in England”, page 445, in listings for Wolverhampton, W Bissell is listed as a Patentee of flooring cramps, lifting jacks and proprietor of mortise locks; mortising machines, bench and vertical saw-frames". By 1871 the business was operating as Messrs. J. G. Bissell and Co. and the trademark on this item in our Collection was phased out. This information assists in allocating the provenance of this item to the late 1860s.This item is significant because it is representative of housing construction tools used in the Wodonga District which have evolved into present day tools.A cast iron clamp used to install tongue and groove floorboards. Maker's mark on on side. W. B. BISSELL PATENTEE WOLVERHAMPTONcarpenters' tools, housing construction

Oregon timber beams and Jarrah flooring were salvalged by George Coop and incorporated into extensions undertaken to 68 Mount Pleasant Road, Eltham. Timber collection/storage for the house extension took years and much was stored on the front lawn for nearly ten years. The renovations were undertaken c.1983.Digital TIFF file Scan of 35mm Kodak Plus-X black and white negative transparency. Also 5 x 13 cm black and white print68 mount pleasant road, george coop collection, victoria docks, wool shed, eltham, houses

Oregon timber beams and Jarrah flooring were salvalged by George Coop and incorporated into extensions undertaken to 68 Mount Pleasant Road, Eltham. Timber collection/storage for the house extension took years and much was stored on the front lawn for nearly ten years. The renovations were undertaken c.1983.Digital TIFF file Scan of 35mm Kodak Plus-X black and white negative transparency. Also 5 x 13 cm black and white print68 mount pleasant road, george coop collection, victoria docks, wool shed, eltham, houses

Oregon timber beams and Jarrah flooring were salvalged by George Coop and incorporated into extensions undertaken to 68 Mount Pleasant Road, Eltham. Timber collection/storage for the house extension took years and much was stored on the front lawn for nearly ten years. The renovations were undertaken c.1983.Digital TIFF file Scan of 35mm Kodak Plus-X black and white negative transparency. Also 5 x 13 cm black and white print68 mount pleasant road, george coop collection, victoria docks, wool shed, eltham, houses

Oregon timber beams and Jarrah flooring were salvalged by George Coop and incorporated into extensions undertaken to 68 Mount Pleasant Road, Eltham. Timber collection/storage for the house extension took years and much was stored on the front lawn for nearly ten years. The renovations were undertaken c.1983.Digital TIFF file Scan of 35mm Kodak Plus-X black and white negative transparency. Also 5 x 13 cm black and white print68 mount pleasant road, george coop collection, victoria docks, wool shed, eltham, houses

Oregon timber beams and Jarrah flooring were salvalged by George Coop and incorporated into extensions undertaken to 68 Mount Pleasant Road, Eltham. Timber collection/storage for the house extension took years and much was stored on the front lawn for nearly ten years. The renovations were undertaken c.1983.Digital TIFF file Scan of 35mm Kodak Plus-X black and white negative transparency. Also 5 x 13 cm black and white print68 mount pleasant road, george coop collection, victoria docks, wool shed, eltham, houses

Oregon timber beams and Jarrah flooring were salvalged by George Coop and incorporated into extensions undertaken to 68 Mount Pleasant Road, Eltham. Timber collection/storage for the house extension took years and much was stored on the front lawn for nearly ten years. The renovations were undertaken c.1983.Digital TIFF file Scan of 35mm Kodak Plus-X black and white negative transparency. Also 5 x 13 cm black and white print68 mount pleasant road, george coop collection, victoria docks, wool shed, eltham, houses

Oregon timber beams and Jarrah flooring were salvalged by George Coop and incorporated into extensions undertaken to 68 Mount Pleasant Road, Eltham. Timber collection/storage for the house extension took years and much was stored on the front lawn for nearly ten years. The renovations were undertaken c.1983.Digital TIFF file Scan of 35mm Kodak Plus-X black and white negative transparency. Also 5 x 13 cm black and white print68 mount pleasant road, george coop collection, victoria docks, wool shed, eltham, houses

Building report Ringwood East Reserve from C Merry, Building Surveyor and Mr Lucas to the Mayor and Councillors Borough of Ringwood 17/7/51. Building can be jacked up and reblocked where necessary. 300' of flooring is necessary in the west section. Roof, spouting and downpipes require overhauling. Needs some repair work inside and outside. Estimated cost 220 pounds.

Coloured photo of Installation of Underground Wiring Whitehorse Road, Mitcham, opposite East Doncaster Road. Photo taken from outside 602 Whitehorse Road, Mitcham. The works were being carried out in the median strip between the service road and the west bound section of the highway.|Flooring Giant is no longer a tenant, but were located on the north west corner of Whitehorse and Doncaster Roads, Mitcham.whitehorse road, underground wiring