This piece of fabric in the design of the Republic of Vietnam’s flag was cut from a roll carried by Military Assistance Command Vietnam operatives when they went around the villages, compounds and outposts. As part of the ‘Hearts and Minds’ program, they would cut off sections and hand them out to anyone who wanted a bit. Some pieces became flags, some head scarves, some were even used to wrap babies. Pieces showed up everywhere. Collected by Sub-Lieutenant A C Perry, Royal Australian Navy Helicopter Flight Vietnam (RAN HFV) 1969 -1970. RAN HFV ) served with the 135th Assault Helicopter Company of the US Army. The Americans named this combined unit the 'experimental military unit' (EMU). Framed fabric piece, yellow with three red stripes, representing the South Vietnam flag plus 3 helicopter unit patches mounted on right hand side SOUTH VIETNAM FLAG/ HELICOPTER UNIT/ SHOULDER PATCHES/ FROM VIETNAM WAR/ KINDLEY ON LOAN FROM/ ANDY PERRY (SS US)/ ROYAL AUSTRALIAN NAVYsouth vietnam flag, helicopter patches, arvn, perry, 135th, 135thahc, emu, ranhfv, navy helicopter, andy perry, hearts and minds

"Homefront" is the name of the group of chainsaw statues in Greensborough's War Memorial Park. Banyule Council initiated the project. The sculptures were designed by Amanda Gibson, carved by Hikaru Kodama and Leigh Conkie. In this sculpture "Vietnam", the soldier is based on veteran Bill Cantwell’s experience in the Vietnam War. The young soldier wears an eye patch – Bill’s legacy of his wartime injury. The base of the statue represents being held down – you can see the hands reaching up the soldier’s legs. Carved by Hikaru. The laser-cut steel shield has a pattern of Huey helicopters flying over rubber trees, Bill’s memory of being evacuated after being shot in the eye. The Homefront project replaces Leigh Conkie's original chainsaw sculptures in War Memorial Park.Digital copy of colour photographsgreensborough war memorial park, war memorials, homefront project

This is the emblem of EMU (Experimental Miltary Unit) who were officially known as Royal Australian Navy Helicopter Flight Vietnam (RANHFV). The unit was formed in 1967 and integrated into the US ARmy 135th Assauly Helicopter Company until 1971. The February 1969 RANHFV Report of Proceedings contained the first reference to the unique unofficial badges worn by the men of the 135th AHC. It stated: "In an endeavour to boost the morale and unity of the Company, the Commanding Officer offered $25 and a 3-day pass to Vungtau for the designer of a new Company Crest and NAMAE Hughes’ entry won the competition. It is a very impressive combination of an anchor and US Army wings in a laurel wreath with USA-RAN inscribed in a scroll above the motto; GET THE B... JOB DONE written below". A further reference was made to the badge in the 16 May 1969 Royal Australian Navy "Navy News", which ran a story on the emergence of this unique badge that has become synonymous with the unit and remains so to this day. Source: https://seapower.navy.gov.au/ran-helicopter-flight-vietnam-history A blue cloth badge with white wings above a gold anchor with the number 135 is in the middle of the wings in white with red and white stripes underneath. On the anchor in red is the word EMU. Above the wings in red is USA RAN. At the bottom of the badge in white letters are the words Get The Bloody Job DoneGet The Bloody Job Donecloth badge, cerberus collection, 135th, emu, navy, helicopters, us army, assault helicopters

The Forests Commission developed the use of helicopters for aerial ignition from the mid 1960s. Bryant and May at Richmond worked with the Commission to develop a Delayed Action Incendiary Device. DAIDs as the were known, had an overall length of 180 mm, striker end length - 10 mm. Ignition end length - 80 mm, then a layer of high melting point wax (to prevent accidental ignition when rubbing together in transit). Both ends coated with a modified match head compound with safety fuse exposed length between coated match ends. There was a 17-second delay from when the small end was struck to an intense flaming of the large end, which lasted for 40 seconds. DAIDs were dangerous so were stored in a metal box outside the helicopter along with a disposable striker patch attached with a quick release pin to a special half-door. The first test was with a Bell 47G on 4 October 1967 and the first use, anywhere in the world, of DAIDs to backburn a large bushfire was undertaken in north eastern Victoria in February 1968. There was a crash of an FCV helicopter conducting aerial ignition near Wandiligong on 19 April 1978 with the tragic death of two forest officers and their pilot. The crash led to the immediate end of the use of DAIDs and the adoption of the safer Premo ping-pong ball incendiary machine which originally came from Canada but was modified at the Altona workshops. Overall, the development of aerial ignition techniques by the Forests Commission from the mid-1960s resulted in a steady climb in the area burnt each year…. peaking at 477,000 ha in 1980-81 and with an impressive 10-year rolling average of 220,000 ha around the time of 1983 Ash Wednesday Bushfires.Developed in Victoria for aerial ignitionLarge double ended match used for aerial ignition and back burning by dropping from a helicopterbushfire, forests commission victoria (fcv)

The Forests Commission developed the use of helicopters for aerial ignition from the mid 1960s. Bryant and May at Richmond worked with the Commission to develop a Delayed Action Incendiary Device. DAIDs as the were known, had an overall length of 180 mm, striker end length - 10 mm. Ignition end length - 80 mm, then a layer of high melting point wax (to prevent accidental ignition when rubbing together in transit). Both ends coated with a modified match head compound with safety fuse exposed length between coated match ends. There was a 17-second delay from when the small end was struck to an intense flaming of the large end, which lasted for 40 seconds. DAIDs were dangerous so were stored in a metal box outside the helicopter along with a disposable striker patch attached with a quick release pin to a special half-door. The first test was with a Bell 47G on 4 October 1967 and the first use, anywhere in the world, of DAIDs to backburn a large bushfire was undertaken in north eastern Victoria in February 1968. There was a crash of an FCV helicopter conducting aerial ignition near Wandiligong on 19 April 1978 with the tragic death of two forest officers and their pilot. The crash led to the immediate end of the use of DAIDs and the adoption of the safer Premo ping-pong ball incendiary machine which originally came from Canada but was modified at the Altona workshops. Overall, the development of aerial ignition techniques by the Forests Commission from the mid-1960s resulted in a steady climb in the area burnt each year…. peaking at 477,000 ha in 1980-81 and with an impressive 10-year rolling average of 220,000 ha around the time of 1983 Ash Wednesday Bushfires.Developed in Victoria for aerial ignition by the FCV and Byant & MayLarge double ended match used for aerial ignition and back burning by dropping from a helicopterforests commission victoria (fcv), bushfire, planned burning