Belonged to Colonel Otter.1 Metal curb chain (part of bridle) 1 Pair of brass Spurs Miscellaneous horse riding accessories x 3horse tack, bridle bits, horse livery

used in the making of bridles during the 19th and early 20th centuries by Holden and FrostUsed and sold by Holden and Frost Ca1900square brass link used in horse accessoriesequine military, civilian, agriculture ca1900, link

used on horse tackle during 19th and early 20th century imported by Holden and FrostImported , used and sold by Holden and Frost C1900Nickel plated steel ring used in the construction of horse accessories and reinsequine, military, agriculture, civilian c1900, ring

used on Horse tackle during the late 1800's and early 1900's on horse equipmentImported and used in manufacture by Holden and FrostNickle plated steel ring used on Horse accessories by Holden and Frostequine agricultural, civilian, military ca1900, ring

Possibly used as plough winkers on farms in the 19th and 20th century.A pair of vintage leather horse winkers with metal rings and side leather buckles to strap it around the horse's head and eyes. The pole and neck straps are adjustable and can be lengthened and tightened without altering the blinds. The front strap goes around the horse's muzzle. They were possibly Plough Winkers. The bit is missing.horse accessories, horse tack, horses, agriculture

Possibly used as plough winkers for horses on farms in the 19th and 20th century.A pair of vintage leather horse winkers with steel rings, a bit and bars and side leather buckles to attach it to the cheek straps of the bridle to help focus the horse's vision to the front. The pole and neck straps are adjustable and can be lengthened and tightened without altering the blinds. The front strap goes around the horse's muzzle. They were possibly Plough Winkers. horse accessories, horse tack, horses, agriculture

Used in the 20h century.A pair of vintage hand horse clippers with two steel blades, a lower blade or comb and a moving blade or cutter that work together to cut the hair. It attached with screws to two steel handles with wooden grips attached by brass fitments.Imprinted on the metal joining the blades - 'A. Martin & Co. Manufacturers'horse accessories, horses, horse clippers

One brass and leather riding spur with a brass rounded or blunt end which has three sharp points attached. It has a rusted buckle on the side of the strap to adjust it to fit the rider's boot. It is designed to be worn in pairs on the heels of riding boots for the purpose of directing the horse to move forward or laterally while riding. They usually are worn in pairs.horses, horse riding equipment, spurs, horse accessories

A pair of curved steel riding stirrups which attach to each side of a horse's saddle in the form of a loop with a flat base to support the rider's foot. They are joined to the saddle by a strap and are used in mounting a horse.horses, horse riding equipment, horse accessories, stirrups

Used in the late 19th and early 20th centuryA vintage handmade metal horse curry comb with a turned wooden handle used for grooming horses. It has five metal bands attached to a metal frame with cut out ridges to create a comb effect. horses, horse grooming, horse accessories

An iron curved horseshoe with three square shaped holes on each side for nails to fasten to the bottom of the horse's hoof.horses, horse accessories, horseshoes

A pair of iron 'u' shaped curved horseshoes with two grooves on each side which have four holes each to fasten to the bottom of the horse's hoof. There is a smooth curved indentation at the top of each one. This is the horseshoe on the right in the picture.No.7horses, horse accessories, horseshoes

A decorative ribbed brass horse bit or mullen which is part of a horse's tack with two looped ring attachments at each end. It fits inside the horse's mouth and gives the rider control of the horse's head.horse tack, horse accessories, bridle bits, horse riding equipment, bits

A pair of iron 'u' shaped curved horseshoes with two grooves on each side which have four holes each to fasten to the bottom of the horse's hoof. There is a smooth curved indentation at the top of each one. This is the horseshoe on the left in the picture.No.7horses, horse accessories, horseshoes

Used on a farm in the late 19th or early 20th century.A pair of brass horse hames with a missing chain link at the top. Each has a hook attached with a metal ring at the end. It has four rings. It would have been attached to a horse collar and used to to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wooden pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. It was used in the late 19th or early 20th century.horses, horse accessories, harness, animal accessories, farm equipment, hames

Used on a farm in the late 19th or early 20th century.A pair of tubular steel horse hames which are linked together by a five links chain at the top to two rings. There are two large flat steel hooks attached to the sides with bolts and nuts and it has two metal rings at the bottom. It would have been attached to a horse collar and used to to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wooden pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. It was used in the late 19th or early 20th century.horses, horse accessories, harness, animal accessories, farm equipment, hames

Used on a farm in the late 19th or early 20th century.A pair of handmade wooden horse hames which are linked together by a leather strap at the top. It has leather traces and four metal rings. At the sides there are two long leather strips with chain links attached to each end.One long leather strap is shown in the second photo in Media - not to be confused with all the other tools in the photo. It would have been attached to a horse collar and used to to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wooden pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. It was used in the late 19th or early 20th century.horses, horse accessories, harness, animal accessories, farm equipment, hames

A single steel swingletree with a wide bar at the base attached to steel bars make a triangular shape. It was used to balance the pull of a draught horse or other draught animals when pulling a vehicle.horse accessories, swingletree, horses, horse tack

A single steel narrow design swingletree with a wide steel bar at the base and is made into a triangular shape. It has two steel loops at each end. It was used to balance the pull of a draught horse or other draught animals when pulling a vehicle.horse accessories, swingletree, horses, horse tack

A wide flat green painted wooden triangular shaped swingletree with a steel bar attached under the wooden section. There are two oval rings joined at each end and there is a wider steel bar in the middle with two chain rings joined to it. It was used to balance the pull of a draught horse or other draught animals when pulling a vehicle.horse accessories, swingletree, horses, horse tack

Used on a farm in the late 19th or early 20th century.A pair of shaped steel horse hames which are linked together by a five links chain at the top to two rings. There are two large flat steel hooks attached to the sides with bolts, nuts and rivets and it has two metal rings at the bottom. It would have been attached to a horse collar and used to to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wooden pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. It was used in the late 19th or early 20th century.Indicipherable inscriptionhorses, horse accessories, harness, animal accessories, farm equipment, hames

The horse collar would have been used on draught horses to pull a wagon or plough on farms.A large vintage leather horse collar with leather straps and buckles at the bottom. It is padded possibly with straw and lined with felt, fur or animal hair. It was part of the horse harness used to distribute the load around the horse's neck and shoulders when pulling a plough or wagon. It often supports and pads a pair of curved wooden or metal hames to which the traces of the harness are attached.horse accessories, horses, agriculture, harnesses, horse tack

as would be used by Holden and Frost in the construction of horse accessoriesBrass whole buckle with steel tongueequine, military, agricultural, civilian c1900, buckle

used on horse accessories during 1800's and early 1900'sUsed, sold by Holden and Frost Ca 1900Brass half Buckle as used in equine accessories Ca1900equine civilian, agriculture, military c1900, half buckle

Manufactured and sold by Holden and Frost used on horse tackle during 19th and 20th centuries on saddle horse and carriage horse.Manufactured and sold by Holden and Frost c1900 for military, agriculture and civilian useBlack metal hackney Horse Bit, equestrian accessoryNILequine, military, agriculture, civilian, c1900, bit

Wooden rectangular case with inlaid ship, bird and sailboat with reflections on one side & painted horse's head with a painted inlaid bridle on other side. Oval sliding closure on one side. cigarette case, hand carving, inlay, tatura, world war ii, smoking accessories, horse head, inlay boat

Spurs would have been used by horse riders in the light horse and in other units in WW1, AIF as part of their standard issued equipment. Hocking Regt No 2741.Pair of silver steel riding spurs with brown/black leather straps and buckle. Spurs are wishbone shape with leather strap across the top. Strap approximately 30cm in length and hooks onto top of spurs with a metal clip. Round blunt circular blade at bottom.passchendaele barracks trust, riding spurs

From Information book; "Reader's Digest/ Gallipoli/ 25th April 1915 - 9th January 1916/ Centenary Commemorative Prints". Collection of 20 prints. Refer Cat No. 7300.Framed print. Print - colour print on paper. Copy of an oil painting with pencil on wood. Depicts a cove with sea, sand and hills. Ruined buildings and structures visible on the beach. Horse eating grass in the foreground. Frame - Black plastic framing with glass front and MDF board backing with adhered black paper.Details below print - in black ink; " GEORGE W LAMBERT (1873-1930) Anzac Cove, 1919" “GEORGE W LAMBERT, unable to enlist in the Australian Imperial Force in London, joined Voluntary Training Corps". Appointed an official Australia War Artist, Australian Imperial Force 1917. framed accessories, prints, ww1, gallipoli, centenary

From information book - "Reader's Digest/ Gallipoli/ 25th April 1915 - 9th January 1916/ Centenary Commemorative Prints". Collection of 20 prints. Refer Cat No. 7300.Framed print. Print - colour print on paper. COPY OF AN ORIGINAL PAINTING - TEXTILE, DYE, COLOURED CRAYON ON COATED PAPER. DEPICTS IN DARK BROWN COLOURS WITH SMALL ACCENTS OF PALE BLUE, RED AND YELLOW - BELOW HORSE. VISIBLE IN PAINTING IS A SOLDIER, HORSE AND GUN CARRIAGE. Frame - Black plastic framing with glass front and MDF board backing with adhered black paper.Details on print; "SIDNEY NOLAN (1917 - 1992) Gallipoli soldier, horse and gun carriage 1961". Sidney Nolan - embarked on a series of Gallipoli drawings and paintings which he completed over a 20 year period. 252 drawings and painting.framed accessories, prints, ww1, gallipoli, centenary