Photograph. Coloured photograph of John Frederick Harper in Lodge Uniform. Mr Harper was born 12 Aug 1905, passed June 2006, was a Bendigo resident and watchmaker. Photrograph taken in 1988. He wears full collar, apron (royal blue 11415.4) arm/wrist decorative bands.March '88 John Frederick Harper 12-8-1905 - 6-2006. Bendigo resident, Watchmaker.photograph, person, john f.harper

Document. (a) Certificate admitting John Edward Harper to the degree of MOST EXCELLENT MASTER of the Royal Golden Chapter of Royal Arch Freemasons of Victoria (Bendigo), No 8454 Dated 20-6-1952. (b)Certificate to reconize John Edward Harper constituted as a Philosophic Mason Knight KH on 17-11-1956 in Bendigo. (c)Certificate Recognizing John Edward Harper as Past Grand Sword Bearer on 15.3.1967. (d)Certificate to verify that John Edward Harper was admitted to the Corona Lodge on 27.3.1933. (e) Certificate to verify that John Edward Harper was admitted to the Royal Golden Chapter in Bendigo on 26.4.1931. (f)Certificate declaring that John Edward Harper was constituted as a Knight of the Eagle and Pelican Sovereign Prince Rose Croix on 3.11.1948 at Corona Lodge.document, certificate, lodge certificate

Object. On the top outside of lid are the initials J.E.H. in 1.3 cm high gold lettering. This case belonged to John Frederick Harper. Machine stitched, with nickel fittings-two fasteners with a fitted lock, and nickel protectors on the four corners of the lid, and the body of the case. The lid is lined with blue silk, and also has a gathered silk pocket, with an elastic gathered top. Four circular :- 1.3 cm diameter, studs are attached to the four corners of the exterior of the base.J.E.H.organisation, masonic lodge, leather case

Document. Certificate with the Crest of the United Grand Lodge of Ancient, Free and Accepted Masons of Victoria Australia. It explains that John Frederick Harper was regularly received into Free Masonry on the 26th day of April, A.L 65 and was admitted to the Third Degree on the 4th day of September 1965 in the Erimus Lodge RO 5021 English Const. In testimony where of I have to hereto subscribed my name and affixed the seal of the Grand Lodge at Melbourne the 22nd day of September AD 1965.document, certificate, lodge membership certificate

Clothing. Pair of short, men's gloves, with three 6 cms long pin-tucks fanned out across the back of the hand. Wrist edge of the glove is bound in the glove fabric, giving a .5 cm binging, which continues around a 7 cm opening at the inside of the wrist. This opening is fastened by a silver coloured metal press-stud, at the centre of this opening.costume accessories, male, white cotton gloves

Object. Rectangular shaped, navy blue cardboard box, with a cardboard hinged lid. 13 cms long, 6 cms wide, 1.5 cm deep. On the receipt of this box it contained two lodge regalia lapel badges . Refer 11415.11. 11415.12.HARVEY C.SMITH PTY.LTD. MASONIC REGALIA SPECIALISTS, 57-59 SWANSTON ST., MELBOURNE, C1,Phone Central 6712.organisation, masonic lodge, cardboard box for masonic regalias

Object. A 5 cm long ribbon, woven in a heavy weave, with a .75 cm red vertical stripe on each side, and a 1.5 cm vertical light blue stripe in the centre. Three .75 cm bands of brass metal - a shaped strip at top and bottom of the fabric, with a rectangular shaped clasp in the centre. These three clasps have decorative engraved patterns. The lower clasp- called a suspender, has a circular hook at the bottom, from which is suspended a circular brass fitting, holding a metal link, which is attached to a four sided shape, with letters in a circular shape - HTWSSTKS, Lodge symbols are on each side of this perspex shaped hanging. A 6 cm long pin attached to a loop on the top bar would fasten the badge to a suit jacket lapel, or other regalia.organisation, masonic lodge, brass and ribbon lapel badge

Object. A 4.5 cm long suspended from a brass curved and decorated clasp at the top, to which is attached at the back, a 6.5 cm long pin , to attach to the wearers garment. This shaped brass clasp is repeated at the lower edge of the ribbon. Two Lodge symbols attached to the centre of the ribbon in a Xshape. Suspended from the lower brass clasp, which is scroll shape, is a brass fitting, from which hangs a perspex four sided shape, with lodge symbols printed on each side.organisation, masonic lodge, brass, perspex and ribbon lapel badge

Object. Grained leather case with silver coloured nickel(?) fittings. Lined with watermark, black silk. A full width, elastic top pocket in the lid, with a 2 cm wide leather strap to hold the lid open. Two small keys, silver in colour, on a fine waxed linen thread.J.F.H. (on Lid). BRO J.F.HARPER, CORONA LODGE NO.195.on front between locks stamped into leather on spine of case. TOP GRAIN HIDE, MADE BY W.POCKNALL VIC.organisation, masonic lodge, black leather corona lodge case

Clothing. Cream kid-leather bound on sides and lower edge with a 5 cm wide light blue grosgrain ribbon,mitred at the lower corners. A Vshaped flap, edged on the Vshape, with a 4 cm wide blue ribbon, and attached to the apron at the top edge with a 4 cm wide blue ribbon, folded in half over the top edge. A blue rosette of the ribbon is attached to the centre of the flap, and there is a blue rosette at each side of the lower edge- all are attached by a 1.5 cm diameter blue silk covered button. A blue, 3 cm wide elastic, with silver coloured hook fastens the apron to an elastic held, silver coloured metal loop fastener.Harvey C.Smith Pty Ltd,. 57 Swanston St., Melbourne. MASONIC REGALIA SPECIALISTS.costume, male, lodge apron

Book. Small book, bound and cover of blue cloth, on the front cover of which is ,printed in gold lettering: Victoria Constitutions 1962. Inside is printed : Constitutions of the United Grand Lodge of Ancient Free and Accepted Masons, Containing The General Charges, Laws Rules and Regulations.&c, &c 1962.Published under the Authority of the Grand Lodge by C.E.Davis Grand Secretary, Melbourne. Harston, Partridge & Company Pty Ltd Printers 1962.book, masonic, victorian constitutions 1962

Clothing. Gloves are bound at the wrist, and around a 7 cms long opening on the inside of the wrist. This opening fastens with a white plastic button 1.5 cm in diameter, and a hand-stitched button. Neither button or button hole appears to be original. On the back of the hand are three 7 cm long rows of stitching-appearing to be double rows, but done in one stitching action. These rows are slightly formed out from the wrist, over the back of the hand.100% cotton fabric. Empire Made M (inside left-hand glove).costume, male, pair white cotton gloves

Object. Metal Lodge Pin, possibly steel. The Symbol of a Compass and Square at the top of the 7.5 cm long pin.organisation, masonic lodge, metal lodge lapel pin

Clothing. Lapel pin with three metal bars in a brass-like finish, across a 4.5 cm long ribbon. The ribbon has a burgandy coloured stripe, 7.5 cm wide at either side with a 1.75 cm light blue stripe in the centre. A floral design on each of the clasps. A 2.25 cm long x 2.cm wide at the top, plastic/perspex shape, with black Lodge Symbols hang from the suspender at the base of the ribbon.costume, male, lodge regalia sash pin

Objects. Fine black leather box, 14 cms x 6.5 cms, lined in royal blue silk satin. A 5.5 cm long silk ribbon has a .75 cm wide burgandy coloured stripe at either edge of a 1.5 cm wide pale blue central stripe. At top and bottom a richly engraved brass clasp, while in the centre is a 7shaped brass symbol, engraved with ""NEANGER 1959MARK LODGE No62, hanging from the suspender is a ^shaped brass shape engraved:"Presented to Wor.Bro. J.E.Harper, PM MASTER 1959.60. as a token of esteem EAGLEHAWK 12-10 60.On the reverse of the Vshape is a section of a ruler - 1,2,3(cms) and a scroll design.Below the inverted^shape a small rectangular shape with rounded top hangs on a small three loop chain. A circular eyelet shape on both front and back has small lettering on either side.organisation, masonic lodge, leather box and lodge badge

Object. Box covered in a leather textured finish, over wooden box. Lined with royal blue coloured silk satin, and with a tiny press button metal clasp. Inside of the lid, is the remainder of a label reading; ? B. EDWARDS, Watchmaker, Jeweller and Optician, BENDIGO,Phone737organisation, masonic lodge, black leather jewellery box

Object. A 5 cm long brass pin at rear, to attach to a uniform. A clasp .75 cm deep, 4 cm long is in navy blue enamel, with gold lettering 'LIFE GOVERNOR'. From this clasp a 5 cm long light blue grosgrain ribbon holds a brass clasp or suspender, from which hangs a circular medal, with five star points. On a circle shape of dark blue enamel are the words:FREEMASONS HOMES OF VICTORIA.In the centre on a light blue enamel background is the Lodge Symbol of Compass and Square. On the back of the medal is engraved: J.E.Harper 1852.organisation, masonic lodge, life governor medal

Object. 4.5 cms long pin from top clasp. Top clasp has brass ends, with leaf engraving. A 3 cm long panel in the centre is finished with light blue enamel, engraved with ''50 YEARS''. The lower clasp is gold and blue enamel engraved SERVICE. Below hangs a 3.5 cm diameter star pointed medallion, in the centre of which is a coat of arms, showing three lions, five stars(Southern Cross?) On a blue enamel background are the words'' Ancient Free And Accepted Masons VICTORIA. On the back of the swinging medallion, is engraved: Wor.Bro.J.E.HARPER, P.G.Swd B 1932-1982.On top and bottom clasp 50 YEARS SERVICE. On hanging medallion Ancient Free and Accepted Masons Victoria. On back of Medal: Wor. Bro. J.E.HARPER 1932-1982.organisation, masonic lodge, masons 50 years service medal

Object. An elaborate item, with a light blue grosgrain ribbon background. An arched and a straight bar at the top state CORONA LODGE. A crown with fanned background, under which is a plinth and a clasp stating No 195 V.C. Below this is an inverted ^shape, highly engraved with a Greek eternity pattern, and decorative scrolling. From this shape hangs a rectangular shape 2 cms x 1.7 cms, which has a fine decorative edge, and a central motif. The underside of the ^shape is engraved as above.Front: CORONA LODGE No195 V.C. Back: Presented to Wor.Bro.W.R.WRIGHT I.P.M. by the BENDIGO CORONA LODGE No 195 V.C. 25.8.20?1organisation, masonic lodge, corona lodge medallion

Object. Soft off-white kid leather apron, with three sides edged in a 5 cm wide band of blue grosgrain ribbon, mitred at the lower corners. A Vshaped over-lap-13 cm deep at the centre front peak and sewn into the waistband, has a metal angled lodge symbol at the centre front. This symbol which has a circular blue enamel shape at the centre, is repeated in the corners of the lower edge. Two 5 cmx16cm long blue ribbon tabs hang from under the V shaped panel, and have a 5.8 cm x 1.3 cm metal fitting at the lower edge. From this metal fitting, seven x 5 cm long chains, each finished with a small metal ball hang over the lower end of the ribbon tab.P.Blashki8. & Sons. IM SAGE ESTABLISHED 1885 105 YEARS OF SERVICE. 109 SWANSTON STREET MELB..organisation, masonic lodge, kid leather apron

Object. Soft white kid leather rectangle - 29 cm x 25 cms, outlined with a 1 cm wide red ribbon frame, a 2.5 cm blue frame, and a further 1 cm red frame. A metal lodge symbol, 6.5 cm x 3.5 cm is stitched onto the lower corners. A Vshaped is hanging panel overlaps the leather panel. and is stitched into the waistband, and hangs freely. The Vshape is edged by a 2.5 cm wide pale blue grosgrain ribbon, and the ribbon is, in turn, edged with a fine red border. This hanging panel is made from white kid leather, and has a Tshaped metal panel stitched at the centre front, and at the two lower corners. A 3 cm wide cotton tape has a silver coloured metal loop at one end, and a silver coloured Sshaped hook on the end of a 58 cm long, adjustable waistband, to fasten the apron around the waist of the wearer.organisation, masonic lodge, kid leather apron

Object. Rich royal blue grosgrain braid, 10 cms wide surrounds a rectangle of cream kid leather, 21 cm wide x 24 cms deep. On this rectangle is an embroidered wreath of foliage in gold and orange coloured thread, embellished with gold metal thread, which also outlines an embroidered bow, at the base of the wreath. In the centre of the wreath, a looped bow is embroidered in thread, and embellished with the gold metal thread. Two gold coloured metal decorative shapes are placed, one on each side of the lower edge of the leather. Two 5 cm wide tabs, adorned with a heavy lodge symbol, including 4 cm long brass metal chain, with ball decorative elements, hang from the waist, and fall to 3/4 length of the leather panel. A peaked flap 9 cm deep is attached from the waistband, and falls loosely over the leather panel. It is also adorned with a brass metal lodge symbol. Black elastic, 3 cm wide attaches at right hand side of waistband, and fastens into an oval metal loop at left hand side.Label on underside of front Vshaped panel 110 years of Service, P.Blashki & Sons 109-113 Swanson Street Melbourne,(and includes Lodge Symbol)organisation, masonic lodge, lodge regalia apron

Object. Hand made from a stiff canvas-type fabric ribbon, on a stiffened cotton canvas backing. Outer edge is maroon in colour 5 cm wide, inner section is a slate blue-ish grey colour, 1.5 cm wide and a maroon fabric button, 1.5 cm in diameter, is central to the rosette.organisation, masonic lodge, fabric rosettes

Clothing. A textured weave, cotton bow, with two rectangular shapes - 9.5 cm x 6.0 cms, with a one cm loop at the centre, attached to a folded double cotton band, 2 cm x 34 cm long, which would fit under the collar of the Lodge shirt. A 1.5 cm diameter silver coloured metal loop at one end of the band, and a silver coloured hook at the opposite end of the band, would fasten the tie in position.costume, male, white cotton bow tie-lodge regalia

Object. Blue, damask weave fabric sash, 240 ms long(including fringing) woven with a rose design, and with a .8 cm wide white satin-finish stripe, just inside the side edges. A gold type metallic fringing, 5 cms deep, finishes each end. A woven panel just off centre of the sash, includes eleven figures, including children, three shields, a globe hand and heart. Radiating from the words- FRIENDSHIP LOVE AND TRUTH is an eye like shape, radiating light. At the lower edge of the panel, woven into the fabric are the words, MANCHESTER UNITY of the INDEPENDENT ORDER OF ODD FELLOWS. Above the woven panel is an ornate metal star, 10 cm x 10 cm, with eight points, and made from silver metal sequins and coiled wirework. Centre of the star is padded to a height of 1 cm, covered in satin, sequins and wirework in a circular shape. A 7 cm long metal tassell hangs from the lower edge of star. A length of silk ribbon, 1.2 cm wide is attached to the lower edge of the sash, perhaps to tie and hold the sash in position when being worn.organisation, masonic lodge, ceremonial sash

Clothing. A pre-tied, black bow tie, attached to a plastic clip, and frame which tucks under the wearers collar, while the clip tucks over the shirt neckline. Two rectangles of black fabric 12 cms x 5 cms, with a 1 cm wide strip, passing twice around the centre of the rectangles, forming a bow.costume, male, black bow tie

This cast iron kitchen appliance was made in England in the early 1900's and shipped to the "colony" Australia. This was before World War II and the "growing up" of a colony to an independent member of "the British Commonwealth". It was a period when most appliances (be they household) where manufactured in England and shipped to Australian ports. It was not until the late 1960's that the Asian manufacturing giant woke up and started to dominate the market palce.This domestic kitchen appliance is very significant to the Kiewa Valley because it highlights the "made at home" period when food processing was made "in house" due to inability to source food from specialised shops e.g. the butcher or slaughter houses. It was a period before mass food processing factories were established and roads constructed up to the standard for distribution to semi remote regions such as Kiewa Valley was in the beginning of the 1900's.This cast iron (malleable iron) mincer for meat products has a large "funnel" to direct "chunks" of meat to the grinding "wheels". These "star" shaped wheels with "teeth" of three different cutting surfaces (fine, medium and coarse) provide for texture types of the final meat product. The meat is placed into the "loading" funnel and push downwards(gravity feed) through the mincing chamber and out through the front side. There is a long "screw worm" which is rotated by turning the handle. The appliance is table mounted by a vice "G" screw on clamp (hand operated). "BEATRICE No. 3" and "MADE IN ENGLAND", "P 3181"household cast iron appliances, food processors

A meat grinder, commonly known as the meat mincer, is used for chopping meat into fine pieces. Alternatively, it can be used for the mixing of raw or cooked meat, fish and vegetables. It is the best way to process meat, and is a widely used piece of equipment by butchers and in the home.. Butchers have been known to use either mincing knives or meat cleavers in the kitchen for years to produce a quantity of minced meat. This was a slow and laborious process. The advent of the meat mincer has not only made the mincing process easier but also faster. The meat mincer has slowly evolved over the years into what it is today. The first meat mixer or meat mincer was invented in the 19th century by a German inventor named Baron Karl Drais. Although some versions of the device date back to much earlier. The oldest form of meat mincer was hand cranked which forced meat through a metal plate with several small holes in it, which resulted in long and thin strands of the meat. The meat was fed into the funnel that was placed at the top of the mixer. This meat would pass through a hand cranked screw conveyor that would squash and mix the meat before passing it through the metal plate. Needless to say, this was again a slow and laborious procedure to follow to produce large quantity of meat. With passage of time, this hand cracked machine became powered by electricity. The meat mincer has a great adaptability and efficiency now. The huge variety in mincer plates allows a butcher to produce different types of minced meat in any shape desired. However, traditional manual meat mincers have not really changed a lot. They are manually operated and made of cast iron, as earlier. They are similar to the original mincer designs, dating back to the early 1900s. Some butchers still prefer using a variety of mincer knives. Adapted from: https://brennan-group.com/blogs/news/history-of-the-meat-mincer This meat mincer belonged to Dr.William Roy Angus, Surgeon and Oculist. It was donated to Flagstaff Hill Maritime Village by his daughter, Bernice McDade. It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he would take time to further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . The organisation began in South Australia through the Presbyterian Church in that year, with its first station being in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill where he’d previously worked as Medical Assistant and purchased a share of the Nelson Street practice and Mira hospital from Dr Les Middleton one of the Middleton Brothers, the current owners of what was once Dr Tom Ryan’s practice. Dr L Middleton was House Surgeon to the Nhill Hospital 1926-1933, when he resigned. [Dr Tom Ryan’s practice had originally belonged to his older brother Dr Edward Ryan, who came to Nhill in 1885. Dr Edward saw patients at his rooms, firstly in Victoria Street and in 1886 in Nelson Street, until 1901. The Nelson Street practice also had a 2 bed ward, called Mira Private Hospital ). Dr Edward Ryan was House Surgeon at the Nhill Hospital 1884-1902 . He also had occasions where he successfully performed veterinary surgery for the local farmers too. Dr Tom Ryan then purchased the practice from his brother in 1901. Both Dr Edward and Dr Tom Ryan work as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He too was House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. Dr Tom Ryan moved from Nhill in 1926. He became a Fellow of the Royal Australasian College of Surgeons in 1927, soon after its formation, a rare accolade for a doctor outside any of the major cities. He remained a bachelor and died suddenly on 7th Dec 1955, aged 91, at his home in Ararat. Scholarships and prizes are still awarded to medical students in the honour of Dr T.F. Ryan and his father, Dr Michael Ryan, and brother, John Patrick Ryan. ] When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery states “HOURS Daily, except Tuesdays, Fridays and Saturday afternoons, 9-10am, 2-4pm, 7-8pm. Sundays by appointment”. This plate is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. Dr Edward Ryan and Dr Tom Ryan had an extensive collection of historical medical equipment and materials spanning 1884-1926 and when Dr Angus took up practice in their old premises he obtained this collection, a large part of which is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. During his time in Nhill Dr Angus was involved in the merging of the Mira Hospital and Nhill Public Hospital into one public hospital and the property titles passed on to Nhill Hospital in 1939. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. ). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (The duties of a Port Medical Officer were outlined by the Colonial Secretary on 21st June, 1839 under the terms of the Quarantine Act. Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. Their interests included organisations such as Red Cross, Rostrum, Warrnambool and District Historical Society (founding members), Wine and Food Society, Steering Committee for Tertiary Education in Warrnambool, Local National Trust, Good Neighbour Council, Housing Commission Advisory Board, United Services Institute, Legion of Ex-Servicemen, Olympic Pool Committee, Food for Britain Organisation, Warrnambool Hospital, Anti-Cancer Council, Boys’ Club, Charitable Council, National Fitness Council and Air Raid Precautions Group. He was also a member of the Steam Preservation Society and derived much pleasure from a steam traction engine on his farm. He had an interest in people and the community He and his wife Gladys were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”.The English-made food mincer is an example of kitchenware available to households from the early 20th century. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other items and equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery.Metal food mincer labelled Harper No. 3181, Beatrice. Made in England. The object is part of the W.R. Angus Collection. Harper. No 3181. Beatrice. Made in England. No 3 Fine.flagstaff hill maritime museum and village, great ocean road, shipwreck coast, mincer, grinder, meat, cooking, beatrice, made in england, harper, no. 3181

Hardcover w/ Dust JacketCard inserted inside front cover and inscription to John from Andrew & Suzywalsh st library