This small knob has been manufactured to look like marble. It may have been used as a drawer or door handle, possibly part of the ship's furnishings because it appears to have been broken off its connecting shank. The encrustations on the surface are from being in the sea around 90 years. The knob was recovered from the wreck of the Loch Ard and is part of the John Chance collection. The Loch Ard was a clipper ship built in Scotland in 1873. In 1978 the ship was sailing to Melbourne with 54 people on board as well as a mixed cargo that included items for the 1880 International Exhibition in Melbourne. On June 1st 1878 it was not far from its destination when it crashed into Mutton Bird Island, east of Port Campbell. Only two people survived. The wreck was re-discovered in 1967 and the site is listed as a Historic Shipwreck. (See References and Significance for further information.)This knob is historically significant as it is an example of hardware fittings made and used during the mid-to-late 19th century. This knob is significant for its connection with the John Chance Collection, which is historically significant as an example of artefacts from wrecks that had been lost in the coastal waters of Victoria from thirty to over one hundred years before John Chance and others discovered them. These artefacts are a sample of goods carried as cargo or personal possessions, and of ship hardware of that era. The knob is significant through its connection with the clipper ship Loch Ard (1873-1878), which is historically significant to both Victoria and Australia. The loss of the ship has been described as one of the ‘worst shipwreck tragedies’ and is well known in Victoria for the tragic death of 52 out of the 54 lives on board. The Loch Ard wreck is historically significant as a large international passenger and cargo clipper ship. It is registered on the Victorian Heritage Database VHR S417. The wreck site is labelled as ‘one of Victoria’s most spectacular diving sites’ and the area is a popular tourist site. It is part of Victoria’s Underwater Shipwreck Discovery Trail. Knob or handle; ceramic (faux marble), dome with flat base, brown colour with orange and cream swirls through it, polished surface. Base has two embedded round, rough-edged metal fittings. Encrustations adhere to the polished surface in pleases. Clear tape keeps large broken chip intact. Another chipped area reveals the rough inner surface of the marble.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john chance, loch ard, knob, handle, door hardware, ceramic, faux marble, vintage, antique, cabinetry, door pull, drawer pull

Digital copy of colour photographfred mitchell collection, 1968, eltham, york street, houses, door knob

Digital copy of colour photographfred mitchell collection, 1968, eltham, york street, houses, door knob

Digital copy of colour photographfred mitchell collection, 1968, eltham, york street, houses, door knob

Digital copy of colour photographfred mitchell collection, 1968, eltham, york street, houses, door knob

Plastic probe with 1 carved bulb end and 1 shaped end. Attachment knob mid way.Attachment knob: "70". "ORTHO".probe, pharmacy

Used in the late 19th centuryA forged steel Bit brace with a large screw to secure the drill bit and a knob at the end of the turning handle. It was used in the late 19th century.on the knob - "10" is stampedsteel, tools, carpentry tools, woodworking tools, cutting tools

Spanners are used to tighten nuts of different sizes. These spanners are large and were used on larger items eg. H.V. McKay machinery. Used by residents of the Kiewa Valley.Both spanners are straight and made of steel. The 'H.V. McKay' spanner has '824' on the back (at the 'knob' end) and has a 'knob' at one end. The other spanner has the same type of opening at each end (no knob) and has embossed '55A' on one side at one end.H. V. McKay embossed (at the knob end) on one spanner and 824 on the back of it. 55A embossed on one side of the other spannerspanners, h.v.mckay

stoneware hot water bottle, generally a cylindrical shape with an opening at the top and a round knob on one end which presumably functions as a holder. The main part of the body is cream, with the knob end brown.Stoneware hot water bottle with a screw in lid. Generally a cylindrical shape with an opening at the top and a round knob on one end which presumably functions as a holder. The main part of the body is cream, with the knob end and lid, brown.hot water bottles., bed warmers

Commonly used 4 cup aluminium teapot with lid, Bakelite handle and knob.Four cup tea pot with lid; bakelite handle and knob."Swan Brand Made in England 4 cups" engraved on baseteapots, kitchen equipment

Commonly used 2 cup aluminium teapot with lid, Bakelite handle and knob.Two cup tea pot with lid; bakelite handle and knob"Swan Brand Made in England The Carlton 2 cups" engraved on baseteapots

Small wooden cabinet with drawers to hold spices with metal labels and knobs, one drawer missing.Small wooden 7 drawer cabinet with 5 drawers, 5 metal tags and knobskitchenware, storage containers, spices

Reckitt's Bag Blue - Four knob pack - Cardboard container with four knobs, each in a paper wrapped bag, and made of powdered ultramarine and baking sodaReckitt's Bag Blue / Four knob pack / Out of the blue comes the whitest wash / Prevents yellowing Keeps your clothes dazzling white Squeeze the bag in the last rinse & stir. This keeps your linen white. Robin starch for better starching.

Used by the Higginson Family farmers of the Kiewa ValleyMetal with glass globe. Kerosene reservoir with screw lid. Crank globe lifter, wick knob.On the base: No. 420 Frowo, Made in Germany with a medallion of dog and a badge. Wick winder knob has a pattern. Kerosene screw lid has a pattern. Glass globe: Dietz, Fitzall, New York, USA.lantern, household item, light, eric higginson, kiewa valley farmers

Presentation to D J Irwin, the Depot Foreman at Geelong following the operation of the last tram No. 4 on 24 March 1956. Mr Irwin subsequently became the Depot Foreman in Ballarat. Would appear that the threaded knob is not part of the original conductor's bell as it does not fully screw into the bell housing. See item 9810 for the presentation of other bells to Councils.Demonstrates a presentation to depot staff at the time of the closure of the Geelong system.Part of conductors bell - brass fitted with a brass threaded knob.Engraved "SEC Geelong Tramways Pres to D J Irwin D/F by BTS J Moore, Last tram 24-3-1956"geelong, depot foreman, closure, conductors bell, d j irwin, j m moore

This table was found in the shed and restored in the 1990's by lightstation staff. The late nineteenth century cedar table has turned legs, a front drawer with brass knob pull (this may not be original). The wood has lost its original finish. Despite this, it has first level contributory significance for its historic value as an original furnishing that has remained at the lightstation since the nineteenth century.It has first level contributory significance for its historic value as an original furnishing that has remained at the lightstation since the nineteenth century.Australian cedar table with turned legs and front drawer with brass keyhole and wooden knob. Unpainted.

The wool industry has been critical to the Australian economy from the early days of European settlement. The increase in wool production in the mid to late 19th century led to the need to replace the hand shears with some mechanized forms of shearing.The first commercially successful sheep shearing machinery by Frederick York Wolseley in New South Wales who was granted a patent for his machine on 28 March 1877. Many of the early settlers to North East Victoria droved sheep overland from both Sydney and South Australia and established large pastoral runs in the district. Wodonga became a major service centre for the industry and established major saleyards for the pastoral and cattle industries. The handset has the company name "Heiniger" on the side. Heiniger is a Swiss company with subsidiaries in Australia and New Zealand. It was originally established in 1946.This item is connected to a major rural industry in North East Victoria.A metal handpiece for a sheep shearing. A toothed blade is held in place with metal adjustable screws at one end. A jointed metal pipe at the other end allows attachment to the shearing machine. The hinge has been covered with leather.On adjustment knob "Heinger"shearing industry, shearing equipment, shearing handset

Knobkerrie are clubs used as weapons mainly in South and East Africa. The club end can be used to throw at an animal or to club an enemy's head in. Usually these would be carved from a protruding tree branch. The name is Afrikaans and comes from 'Knop', meaning knot or ball and 'Kierie', meaning cane.Accessioned into the museum collection in 1913 and donated by a Mrs Newcome, there is not much other information on its provenance. However, the museum collection holds several artefacts from this region of South Africa and much of it was collected during the Boer Wars of 1880-1881 and 1899-1902.A wooden club type object. It has a narrow cylindrical handle with a large wooden sphere at the top. The wood is shiny and smooth with a polished effect. The handle is 31.5cm long with a 2cm diameter and the head or knob has a height of 9.5cm and a circumference of 27cm.This would have been hand carved from a protruding tree branch. Towards the end of the handle is a 13.9cm section of zig-zag patterning. Further down towards the 'knob' there looks to be carved into the wood 'Jud'.knobkerrie, boer war, zulu, south africa, ethnography, weapon

Electric fans were used for cooling rooms prior to air conditioning.This fan was used by S.E.C.V. office workers working on the Kiewa Hydro Electric Scheme. Small electric swivel fan. This heavy black metal fan has 4 curved 'wings' covered by protecting wire consisting of 2 wire rings joined by 6 curved pieces of wire covering the sides and front. Attached to the motor that can swivel and to the base is a black rubber covered electric cord. The base forms a stand with a control knob for speed and swivel options. On a plaque: Menominee / Fan Motor / 55182591 Serial No. 200 volts / ACC current 6 cycles / Menominee Electric Mfg. Co. / Menominee ..? Control knob: 0,1,2,3 along slotelectric fan; state electricity commission of victoria; kiewa hydro electric scheme; office furniture

Before electricity was common in households throughout Victoria, kerosene lamps were used to illuminate our homes. The oil lamp manufacturer, Aladdin, arrived in Australia in 1916 after remaining primarily a United States-run company. Their lamps became incredibly popular in Australia following the company's official incoporation in 1924 where, even as the following decades saw a rapid increase in urbanisation and electricity, the demand for kerosene lamps remained high. A unique feature of the Australian-made models was that which allowed them to be transferred to different holders and stems. This meant that one lamp could function in multiple different ways, saving a family from needing to buy multiple lamps to sit in floor stems, on tables, or hang from ceiling brackets. From 1939, adapters could also be purchased to convert a kerosene lamp into an electric one. The lamp featured is likely a Model 16B, with an Australian-made bowl and American-made burner, as these were cheaper to import from the Chicago warehouse than to make locally. Significant wear around the underside of the lamp's lip may indicate that it was often used with a hanging frame.This lamp demonstrates the lasting necessity of kerosene and oil-powered lighting in more outlying regions like Emerald, even in an age where electricity was beginning to become nationally available.An oil lamp composed of two pieces: a metal base and a tall glass chimney. The base of the lamp is circular with a flat bottom and a small lip running around the highest outside edge. Underneath the base is a small hole. A circular cap rests on the top of the base, and protruding vertically from the base is a cylindrical metallic burner. The burner is perforated with many small ventilation holes, and an inscribed knob sticks out from its side. A glass chimney rests over the top of the burner.Glass chimney, printed: "Aladdin" Wick raiser knob, engraved: ".MANTLE LAMP CO. / NU-TYPE / Model B / Aladdin / PATENTS PENDING / MADE IN / U.S.A / CHICAGO, ILL."1940s

When the ship Schomberg was launched in 1855, she was considered the most perfect clipper ship ever to be built. James Blaine’s Black Ball Line had commissioned her to be built for their fleet of passenger liners. At a cost of £43,103, the Aberdeen builders designed her to sail faster than the quick clippers designed by North American Donald McKay. She was a three masted wooden clipper ship, built with diagonal planking of British oat with layers of Scottish larch. This luxury vessel was designed to transport emigrants to Melbourne in superior comfort. She had ventilation ducts to provide air to the lower decks and a dining saloon, smoking room, library and bathrooms for the first class passengers. At the launch of Schomberg’s maiden voyage, her master Captain ‘Bully’ Forbes, drunkenly predicted that he would make the journey between Liverpool and Melbourne in 60 days. Schomberg departed Liverpool on 6 October 1855 with 430 passengers and 3000 tons cargo including iron rails and equipment intended the build the Geelong Railway and a bridge over the Yarra from Melbourne to Hawthorn. The winds were poor as Schomberg sailed across the equator, slowing her journey considerably. She was 78 days out of Liverpool when she ran aground on a sand-spit near Peterborough, Victoria, on 27 December; the sand spit and the currents were not marked on Forbes’s map. Overnight, the crew launched a lifeboat to find a safe place to land the ship’s passengers. The scouting party returned to Schomberg and advised Forbes that it was best to wait until morning because the rough seas could easily overturn the small lifeboats. The ship’s Chief Officer spotted SS Queen at dawn and signalled the steamer. The master of the SS Queen approached the stranded vessel and all of Schomberg’s passengers were able to disembark safely. The Black Ball Line’s Melbourne agent sent a steamer to retrieve the passengers’ baggage from the Schomberg. Other steamers helped unload her cargo until the weather changed and prevented the salvage teams from accessing the ship. Local merchants Manifold & Bostock bought the wreck and cargo, but did not attempt to salvage the cargo still on board the ship. They eventually sold it on to a Melbourne businessman and two seafarers. After two of the men drowned when they tried to reach Schomberg, salvage efforts were abandoned. In 1975, divers from Flagstaff Hill, including Peter Ronald, found an ornate communion set at the wreck. The set comprised a jug, two chalices, a plate and a lid. The lid did not fit any of the other objects and in 1978 a piece of the lid broke off, revealing a glint of gold. As museum staff carefully examined the lid and removed marine growth, they found a diamond ring, which is currently on display in the Great Circle Gallery. Flagstaff Hill also holds ship fittings and equipment, personal effects, a lithograph, tickets and photograph from the Schomberg. Most of the artefacts were salvaged from the wreck by Peter Ronald, former director of Flagstaff Hill. When the ship Schomberg was launched in 1855, she was considered the most perfect clipper ship ever to be built. James Blaine’s Black Ball Line had commissioned her to be built for their fleet of passenger liners. At a cost of £43,103, the Aberdeen builders designed her to sail faster than the quick clippers designed by North American Donald McKay. She was a three masted wooden clipper ship, built with diagonal planking of British oat with layers of Scottish larch. This luxury vessel was designed to transport emigrants to Melbourne in superior comfort. She had ventilation ducts to provide air to the lower decks and a dining saloon, smoking room, library and bathrooms for the first class passengers. At the launch of Schomberg’s maiden voyage, her master Captain ‘Bully’ Forbes, drunkenly predicted that he would make the journey between Liverpool and Melbourne in 60 days. Schomberg departed Liverpool on 6 October 1855 with 430 passengers and 3000 tons cargo including iron rails and equipment intended the build the Geelong Railway and a bridge over the Yarra from Melbourne to Hawthorn. The winds were poor as Schomberg sailed across the equator, slowing her journey considerably. She was 78 days out of Liverpool when she ran aground on a sand-spit near Peterborough, Victoria, on 27 December; the sand spit and the currents were not marked on Forbes’s map. Overnight, the crew launched a lifeboat to find a safe place to land the ship’s passengers. The scouting party returned to Schomberg and advised Forbes that it was best to wait until morning because the rough seas could easily overturn the small lifeboats. The ship’s Chief Officer spotted SS Queen at dawn and signalled the steamer. The master of the SS Queen approached the stranded vessel and all of Schomberg’s passengers were able to disembark safely. The Black Ball Line’s Melbourne agent sent a steamer to retrieve the passengers’ baggage from the Schomberg. Other steamers helped unload her cargo until the weather changed and prevented the salvage teams from accessing the ship. Local merchants Manifold & Bostock bought the wreck and cargo, but did not attempt to salvage the cargo still on board the ship. They eventually sold it on to a Melbourne businessman and two seafarers. After two of the men drowned when they tried to reach Schomberg, salvage efforts were abandoned. In 1975, divers from Flagstaff Hill, including Peter Ronald, found an ornate communion set at the wreck. The set comprised a jug, two chalices, a plate and a lid. The lid did not fit any of the other objects and in 1978 a piece of the lid broke off, revealing a glint of gold. As museum staff carefully examined the lid and removed marine growth, they found a diamond ring, which is currently on display in the Great Circle Gallery. Flagstaff Hill also holds ship fittings and equipment, personal effects, a lithograph, tickets and photograph from the Schomberg. Most of the artefacts were salvaged from the wreck by Peter Ronald, former director of Flagstaff Hill. Drawer Knob, unknown composition, cracks in head, has slight encrustation. Artefact Reg No S/118. Recovered from the wreck of the Schomberg. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwrecked-artefact, clipper ship, black ball line, 1855 shipwreck, aberdeen clipper ship, captain forbes, peterborough shipwreck, ss queen, drawer, drawer knob, knob

Silver coloured metal petrol iron with removable top plate and cylindrical tank. Metal handle with blue painted wooden top attached and metal plaque with maker's details and insignia between screws on bottom section of handle. Plastic knob to remove top section. Pumpless Iron, with Wooden Handle and Attached Canister for Shellite (lighter Fuel).Metal Plaque on the left side says "All British Pumpless Iron. Manufactured by Handiworks Brisbane" Other writing in the metal is not legible. the letter "H" has been engraved into the top of the iron under the handle. "CLOSE HANDI" with an arrow pointing right on the black plastic knob on top of the iron and the back of the iron.clothes iron

Pen holder with a door knob from the RMS Queen Mary mounted on a souvenir. Door knob is missing.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village