These light bulbs were in a house at 37 Gladstone Street Orbost which was built around 1928 for Oliver and Edith Hanrahan. The globes were still working when the house was bought in 1983 by Paul Dawson.Two clear glass elongated electric light globes. .1 - 230-40WT Philips Made in Hollandlighting philips & co. light-bulb

Most were used in various capacities at Ballarat School of Mines or University of Ballarat.Assorted lamps including Edison Carbon filament light bulbs and other special purpose lamps, .1-3) Robertson, pear shaped 220 V 16, carbon filament? bayonet light bulb with 'nipple'. .4) Ediswan, standard shaped, 928, carbon filament? bayonet light bulb with 'nipple'. .5) (B in a circle) 280 V 32 oo1A, pear shaped, carbon filament? bayonet light bulb with 'nipple'. .6-7) Crompton? standard shaped, carbon filament? bayonet light bulb. Clear glass with an amber tint. .8) 230-240 V 40 W, pear shaped, wire filament bayonet light bulb. .9-10) Osram standard shaped, heavy spiral and disc electrodes, bayonet light bulb. (The disc is loose in 10) .11 a&b) Osram black glass, large standard shaped, 230-240 V 125 W, bayonet light bulb. .12) Philips tubular shaped projector lamp with instruction leaflet. .13) Philips tubular shaped projector lamp with instruction leaflet in original box. .14) EH JA 12 V 55 W small projector lamp. .15) Large special purpose, standard shaped, frosted bayonet light bulb. .16) Siemens, standard shaped, modern Edison screw light bulb. .17) Philips, standard shaped, modern Edison screw, frosted light bulb. .18) Crompton, gas filled 240 V 75 W, standard shaped, bayonet frosted light bulb in original box. .19) Crompton, gas filled 230 V 300 W. standard shaped, large modern Edison screw light bulb. .20) Probably an extension cord with a bayonet fitting at one end connected by a twisted cord of two fabric covered wires to a large socket. This socket has a copper Edison screw inner, surrounded by a ceramic tube and covered with a copper housing. The housing is cracked in two places.Some have makers brand and voltage and wattage stamped onto the glass.scientific instrument, ballarat school of mines, globes, edison, lamps, light bulbs, bayonet

First type of metal filament lamp. Used as spot lights or a bank of these bulbs were used for load when testing the generators at SMB or University of Ballarat.Royal Ediswan, 240 V 60 W, pear shaped, wire filament bayonet light bulb.ballarat school of mines, globes, ediswan, lamps, light bulbs, bayonet

"First described by professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969. Macintosh semi curved blade designed in a baby size, with an unfitted light bulb attached. Minor scratches and some slight hit marks over the piece surface caused by its previous use. It has the manufacturer name and the place where it was made along with the owner’s name engraved at the back of the blade. Engraved at the back of the blade near light bulb the owner details: R.C.H. / O.P.T. Stamped at the back blade base into metal the manufacturer's name and place: Longworth / MADE IN ENGLAND Stamped on light bulb base serrated surface, HEINE XHL / #059 2,5v paediatric blades, royal children's hospital, macintosh, light bulb, longworth, blade, laryngoscope

"First described by Professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969.Right hand stainless steel size 3 Macintosh interchangeable laryngoscope blade with light bulb, attached to a standard sized handle with serrated grip and no batteries inside deposit. Minor scratches and hit marks are over its surface. A blue sticky tape is attached to the back side of the blade where the size and type is, also can be found the mark left by a previous sticky tape around the top neck of the handle. The blade was made by Penlon in England.Engraved in cursive writing above the light bulb, Royal Childrens Hospital Engraved in capital writing above the light bulb next to previous text, D.A. Stamped at the back side of the blade, MACINTOSH / 3 Stamped at the blade base lateral side, REGD. TRADE MARK / PENLON / MADE IN ENGLAND Stamped at the blade back side, STAINLESSlaryngoscope, macintosh laryngoscope, macintosh blade, light bulb

Used at Ballarat School of Mines in areas needing a lot of light as well as numerous globes in banks to test the generators.Osram large gas filled, standard shaped, Eddison screw 250 V 300 W light globe.bulbs, light bulbs, osram, gec osram, ballarat school of mines, globes, edison screw, lamps, electricity

Black and white photograph of a metalwork chandelier by Matcham Skipper with sixteen light bulbs. Nonematcham skipper, photograph, chandelier, montsalvat

Iron chandelier with central cross and decorative design and eight radiating spokes containing light bulbs. Nonematcham skipper, metal work, chandelier

Brendan MALONEY'S business card for North Port Electrical Services located at 289 Ross Street, Port Melbourne.Grey business card with red & blue lettering and a drawing of a man inside a light bulb on the left hand side.business and traders, north port electrical services, brendan maloney, ross street

An example of local handicrafts A small model sailing boat in a glass light bulb, with a lighthouse, a windmill and three buildings on a cliff top in the background.model boats, seascapes

Electric Light bulb used in Point Lonsdale Lighthouse in the 1960sElectric Light globe used in the point Lonsdale Lighthouse Globe, Electric 240V, 500W, E40240V, 500Watt. Made in Germany. E40point lonsdale lighthouse, electric light, light bulb

Black and white photograph of a Matcham Skipper chandelier with central circle with decorative design and outer circle with seven radiating spokes with light bulbs. Nonematcham skipper, photograph, chandelier, metalwork

The five cell metal torch from c. 1950s has local significance due to being used by Wodonga resident, Bill Harris, in his youth, as well as historical significance due to its age and representativeness.Metal torch with a plated yellow surface around the light bulb and a long grip with repeated bands of three lines in the surface and a sliding on-off button. "EVEREADY / TRADE-MARK / MADE IN HONG KONG" - on the base of the torch.1950s torches, metal torches, eveready torches, five cell torches, vintage torches

Magill type blade to fit Longworth handles adult size without light bulb. Attached hinge at the back of the blade. Visible hit marks mostly present at the back top of the blade and below. Worn contact stud on base and lateral side at the light bulb connection. Dust spots around the piece. It has stamped on the blade base the attachment type name.Stamped at the attachment base of the blade in cursive writing, Longworthlongworth, magill, blade, adult blades, penlon

Mary Howlett (1840-1922) began practising as a country midwife in 1866 in the western district of Victoria. She qualified as a 'ladies monthly nurse' in 1887 and continued to practise as a nurse and midwife until 1920. She began her six months training at the Melbourne Lying-In Hospital. She was known by many as 'Auntie', and her career spanned more than 50 years. Mrs Howlett's midwifery box and contents were given to Dr Frank Forster who donated them to the museum collection in 1993. Glass breast pump with cork stopper and wooden bung. Pump shape loosely resembles that of a light bulb, with a bell-shaped nipple shield on one side. breast feeding, midwifery

Magill straight laryngoscope blade with tubular space for a light bulb connection (no light bulb is present). It is a PENLON piece, made in England. Size 1, for infant use. Has a slight yellowish discolouration over its base. General scratches around the base of the blade and a sticky old mark bellow an engraved inscription. It has engraved the name of the hospital where it came from and the initials of its owner.Engraved under the blade arm base the name, Royal Childrens Hospital Engraved in its lateral side attachment base piece the initials, D. A. Stamped at the back of the attachment base piece the type and size, MAGILL / 1 Stamped in its lateral side attachment base piece the trademark name and its made place, REG [is not visible the continuation] / PENLON / MADE IN ENGLANDmagill, blade, royal childrens hospital, metal, d.a.

“Penlon was founded as Longworth Scientific Instrument Co. Ltd, in 1943, in Oxford, by personnel from the Department of Anaesthetics at Oxford University.” (Ref. Retrieved from URL 2015: http://www.penlon.com/en/us/about/history.html ) Magill type blade to fit Longworth handles adult size without light bulb and without hinge at the back of the blade. Visible dust veil over its surface with presence of small oxidation spots mostly over the blade canal and base. Almost non used contact studs on base and lateral side at the light bulb connection. It has stamped on the blade base the fitting type name and the place where it was made.Stamped at the fitting base of the blade in cursive writing, Longworth Stamped at the fitting base of the base in capital writing below the previous text, MADE [I]N ENGLAN[D] longworth, magill, blade, adult blades, penlon

Metal laryngoscope in two parts. A round hollow handle with a textured grip and a screwed in base for holding batteries. The metal blade screws in to the handle and has a moulded section for a small light bulb. Engraved in to top of blade, D.A. Engraved in to base of handle, B.T.S. / R.W.H. D.A. Stamped in top of the handle, PAT.NO.683731 Stamped in top of the handle, BRITISH [indecipherable]laryngoscope, light bulb, battery

Bendigo No. 22 illuminated for 1954 Royal Visit at Depot in March 1954. Tram has been outlined with light bulbs and has royal crest on side. Copied from an original slide taken by Basil Miller.Stamped on 'K.S.KIngs etc' and in blue ink, K(e)(232), Bendigo No. 22 decorated and illuminated for Royal Visit (Depot), March 1954. Copied ex original, taken for me by Basil Miller.'tramways, trams, bendigo, depot, royal visit, tram 22

Complete Macintosh laryngoscope piece with a curved large sized attached blade with light bulb and a textured handle with serrated grip for easy of use and a screw in the blade connector. The handle is also a battery deposit to supply the led light bulb. The blade has general scratches on its surface because its use. At the back of the blade is still attached the curved lamina as holder of the base with the blade in its regular use position. Several engraved and stamped inscriptions are present all over the handle and blade (see inscriptions for details). Stamped on the base of the blade, BOC Stamped on the edge of the back side blade, STAINLESS Stamped on the back side blade base, MADE IN ENGLAND Engraved at the base of the blade attachment place, MAINLAND Engraved at the edge of the serrated grip of the handle, Alfred Anaes Stamped at the base of the handle, REGD TRADE MARK / P E N L O N / MADE IN ENGLAND Stamped at the bottom of the handle base, REGD TRADE MARK / P E N L O N / MADE IN ENGLAND Engraved at the bottom of the handle base, AnaeA / ALFREDlaryngoscope, complete laryngoscope, boc, penlon, handle, alfred hospital, anaesthesia

Instruction to Ballarat crews dated 30/5/1951, titled "Notice for Motormen/Conductors and Conductors" about the type of light bulbs or globes provided for trams, clear globes for headlights, frosted for interiors, and what to do if a bulb had to be replaced. Signed by Les Denmead.Yields information the process for replacement of faulty tram light bulbs.Notice type on quarto paper.secv, trams, tramways, headlights, faulty equipment

Item used to hold a light bulb inside a tram roof. Made in England, with a horse shoe makers mark and that it is "Vitreous" formed into the base of the item. Recovered from tram 14 during the project to rewire the trams. New light fittings are 24V rather than 125V DC.Demonstrates an item to hold a Edison Screw lamp inside a tram.White ceramic base fitted with a brass formed Edison Screw lamp holder fitted with screw terminals and brass parts. One of the securing brass screws remains in the holder.tram 14, tramcars, lights, electric lighting, tramcar maintenance

Lynah's Ovoid Laryngeal Speculum with the light bulb and part of the connection wires still attached. Its semi square shape is characteristic of this kind of instrument, also has an screwable pointed end attachment. It has dusty and grey spots inside the canal of the blade near the light bulb canal. Solder spots are visible at the top of the blade as attachment of the laryngeal speculum blade base. General discolouration over the surface of this piece and hit marks present at the base of the handle. It was roughly engraved over the handle the owner’s details and year. Stamped at the base of the handle are the manufacturer’s details partially visible. Engraved at the handle, U N N A M E T . A D E L A I D E . c. 194[6] . Stamped at the base of the handle, [first line worn away might be MADE BY] / E / A D / [might be an S] YDN [might be an EY] / CHROME PLAT [incomplete word due stamp near the edge]laryngeal speculum, laryngeal instruments, unnamet, adelaide, lynah, henry lowndes

Semi straight infant Macintosh blade with light bulb only. The item has a general good conservation and completeness regarding its hinge piece and base bulb connector. It has stamped the manufacturer name (PENLON) and the place where it was made (New Zealand).Stamped, REGD TRADE MARK / PENLON / MADE IN NEW ZEALANDpenlon, macintosh, straight laryngoscope, infant, blade, laryngoscope, new zealand

Photograph shows MESCo or SECV Geelong tram No. 23 decorated with lights for an event. Item 9810i, records that the tram was adapted for use with many light bulbs for various events. Not known which event that this was for. The tram has the destination of West. See item 5863 for when it was used for the 1938/39 centenary.Yields information about Geelong tram 23 fitted with decorative lights.?Black and white photograph with a plain back.tramways, geelong, tramcars, decorated tram, tram 23

"First described by professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969. Macintosh semi curved blade designed in a child size, with a light bulb attached. Minor scratches and some slight hit marks over the piece surface caused by its previous use. It has stamped the manufacturer name and the place where it was made at the back of the blade.Stamped on the back blade base, Longworth / MADE IN ENGLANDmacintosh, blade, longworth, paediatrics, light bulb

Object belonged to and was used by Dr Lennard Travers 1950-1970.Complete Macintosh laryngoscope piece with a curved medium sized attached blade with light bulb and a textured handle with serrated grip for easy of use and a screw in the blade connector. The handle is also a battery deposit to supply the led light bulb. The blade has general deep scratches on its surface and a slight metal deformation on top back of the blade. At the back of the blade is still attached the hinge that keeps in regular position the base and the blade, is also present a worn surface in this area. Green spots of dust and oxidation processes are present over the blade and the handle areas. A handle manufacturer stamp is located at the base of handle (see inscriptions for details).Stamped into base of handle: LONGWORTH INST. CO. / OXFORD / ENGLANDmacintosh, laryngoscope, blade, handle, longworth inst. co., england

Curved MAC (Macintosh) HEINE laryngoscope blade with light bulb, size 4. Made in Germany with stainless steel materials. Minor scratches and hit surface marks are around the piece, mostly near the base of the blade. Connector point located at the base of the blade is slightly worn out. Stamped on the base of the blade back edge side, HEINE / STAINLESS / W.-GERMANY Stamped at the lateral back side of the blade, MAC 4airway, laryngoscope, alfred hospital, melbourne, mac 4 heine, heine, blade, ball, christine