Image dated as 1962 based on same image in Port of Echuca collection (print 20 x 25.5cm) On reverse in pencil: 351, D3 Loco" In blue pen:" Echuca Locomotive shed 1962 Photograph: George L. Coop" https://victoriancollections.net.au/items/59c31c1321ea890ecc057721Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencyd3-640, echuca railway station, george coop collection, railway workshop

Image dated as 1962 based on same image in Port of Echuca collection (print 20 x 25.5cm) On reverse in pencil: "351, D3 Intro 1902 DD, Converted 1929 D3" In blue pen:" Echuca Locomotive shed 1962 Photograph: George L. Coop" https://victoriancollections.net.au/items/59d5663721ea6e1278d00bdcDigital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencyd3-640, echuca railway station, george coop collection, railway workshop

The coal loader is visible in the distance. Image dated as October 1962 based on same image in Port of Echuca collection (print 17.5 x 24.5cm) On the reverse of photo:" Photo by: George L. Coop Oct 1962". Crossed out, in black pen: "565". In pencil:" D3... T Class diesel 1954 Intro" https://victoriancollections.net.au/items/59e7e43321ea6a13c065088bDigital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencyd3-677, d3-class steam locomotive, echuca railway station, george coop collection, railway workshop, t-328, t-class diesel electric locomotive

The Victorian Railways J class was a branch line steam locomotive operated by the Victorian Railways (VR) between 1954 and 1972. A development of the successful Victorian Railways K class 2-8-0, it was the last new class of steam locomotive introduced on the VR. Introduced almost concurrently with the diesel-electric locomotives that ultimately superseded them, these locomotives were only in service for a relatively short time. https://en.wikipedia.org/wiki/Victorian_Railways_J_classDigital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencyechuca railway station, george coop collection, j-527, j-class steam locomotive (vulcan foundry), railway workshop

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencyd3-640, echuca railway station, george coop collection, railway workshop

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencyd3-640, echuca railway station, george coop collection, railway workshop

Note: D3-677 has a large amount of calcification accumulated on its boilerDigital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencyd3-677, d3-class steam locomotive, echuca railway station, george coop collection, j-511, j-class steam locomotive (vulcan foundry), k-155, k-class steam locomotive (vr newport workshops), railway workshop

Note: D3-677 has a large amount of calcification accumulated on its boiler Image dated as November 1962 based on same image in Port of Echuca collection (print 19.5 x 24.5cm) On reverse in blue pen:" Photo by: George L. Coop Nov 1962" https://victoriancollections.net.au/items/59dead0921ea6e12dc45fc25Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencyd3-677, d3-class steam locomotive, echuca railway station, george coop collection, j-511, j-class steam locomotive (vulcan foundry), k-155, k-class steam locomotive (vr newport workshops), railway workshop

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencygeorge coop collection, k-173, k-class steam locomotive (vr newport workshops), railway workshop

Image dated as August 1963 based on same image in Port of Echuca collection (print 20 x 25.5cm) On reverse in pencil: " R Class intro 1968". In blue pen:" Photo by: George L. Coop Aug 1963" https://victoriancollections.net.au/items/59dea66221ea6b12dc44ffc0Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencyechuca, echuca railway station, george coop collection, r-704, r-727, railway workshop, r-class steam locomotive

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencyechuca, echuca railway station, george coop collection, r-704, r-727, railway workshop, r-class steam locomotive

This photograph shows the locomotive shed is in quite good repair. It also shows that in 1979 the shed was not being used. There is long grass and bushes around the shed. The picture shows the architectural features of the shed very well.This photograph is significant because it shows the state of the locomotive shed at the Echuca Railway station in the late 1970's.A coloured postcard sized photograph of a locomotive shed at the Echuca Railway station, taken facing the facade which incorporates three symmetrical and connected arches.. There is a round window above the three arches.locomotive shed, echuca railway station, trains, railways

The old Loco shed was built in 1864, as part of Echuca's rail extension, to service both passengers and goods but mainly wool, from the Riverina to Melbourne.The coming of the railway had a significant impact on Echuca and the transportation of produce, people and goods between Melbourne and the Riverina. The extension of the rail line from Bendigo began in 1862 and the final rail was laid in 1864. The Echuca line went into service immediately. The trains average speed was 20-25miles/hour double the pace of the Cobb & Co coaches. The locomotive shed housed and repaired the steam trains and carriages.Colour photograph X 2, of the old locomotive shed, showing the 3 front arches and side arches of one side wall. This photo was taken in 1977 showing the shed open but unused and surrounded by dried grass. P000157.1 & P000157.2On reverse printed: Dec 77-M: Print made by Kodak : Kodak P000157.1 in pencil Old Loco Shed P000157.1.2 typed sticker Old Loco Shed, Echuca. 1864locomotive shed, echuca, railways, echuca, echuca -transport

VR Commissioner's Special train, steam locomotive D3-639 filling up with water at the coal hopper, Echuca Railway Station, 1962. The tender has been all polished up. THE ECHUCA COALING STAGE. Locomotives would stop alongside to receive coal dropped into their tenders from small overhead rail mounted tipping trays. Water could be obtained from either the elevated tank at one end or the connected standpipe at the opposite end. Locomotive firebox contents could be dumped into pits between the rails from locomotives once they were carefully positioned above them. Such locomotives then could move onto the Engine Shed area for overnight parking. Firebox fires would be re-lit when the locomotive was next needed in a day or so.Digital TIFF file Scan of black and white print enlargement on textured paper (14.5 x 21 cm)coal hopper, d3-639, d3-class steam locomotive, echuca railway station, george coop collection, vr commissioner's special train

THE ECHUCA COALING STAGE. Locomotives would stop alongside to receive coal dropped into their tenders from small overhead rail mounted tipping trays. Water could be obtained from either the elevated tank at one end or the connected standpipe at the opposite end. Locomotive firebox contents could be dumped into pits between the rails from locomotives once they were carefully positioned above them. Such locomotives then could move onto the Engine Shed area for overnight parking. Firebox fires would be re-lit when the locomotive was next needed in a day or so.Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencygeorge coop collection, echuca railway station, k-185, k-class steam locomotive (vr newport workshops), railway workshop

THE ECHUCA COALING STAGE. Locomotives would stop alongside to receive coal dropped into their tenders from small overhead rail mounted tipping trays. Water could be obtained from either the elevated tank at one end or the connected standpipe at the opposite end. Locomotive firebox contents could be dumped into pits between the rails from locomotives once they were carefully positioned above them. Such locomotives then could move onto the Engine Shed area for overnight parking. Firebox fires would be re-lit when the locomotive was next needed in a day or so. Image dated as November 1963 based on same image in Port of Echuca collection (possibly frame 32 of film) (print 19.5 x 24.5cm) On reverse in pencil: " K Class at Echuca" Echuca K Class. 1940-1968". In blue pen:" Photo by: George L. Coop Nov 1963" https://victoriancollections.net.au/items/59de9cc421ea6b12dc3f7597Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencycoal hopper, echuca railway station, george coop collection, k-158, k-class steam locomotive (vr newport workshops)

THE ECHUCA COALING STAGE. Locomotives would stop alongside to receive coal dropped into their tenders from small overhead rail mounted tipping trays. Water could be obtained from either the elevated tank at one end or the connected standpipe at the opposite end. Locomotive firebox contents could be dumped into pits between the rails from locomotives once they were carefully positioned above them. Such locomotives then could move onto the Engine Shed area for overnight parking. Firebox fires would be re-lit when the locomotive was next needed in a day or so.Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencycoal hopper, echuca railway station, george coop collection, k-158, k-class steam locomotive (vr newport workshops)

THE ECHUCA COALING STAGE. Locomotives would stop alongside to receive coal dropped into their tenders from small overhead rail mounted tipping trays. Water could be obtained from either the elevated tank at one end or the connected standpipe at the opposite end. Locomotive firebox contents could be dumped into pits between the rails from locomotives once they were carefully positioned above them. Such locomotives then could move onto the Engine Shed area for overnight parking. Firebox fires would be re-lit when the locomotive was next needed in a day or so.Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencyechuca railway station, george coop collection, j-500, j-class steam locomotive (vulcan foundry)

THE ECHUCA COALING STAGE. Locomotives would stop alongside to receive coal dropped into their tenders from small overhead rail mounted tipping trays. Water could be obtained from either the elevated tank at one end or the connected standpipe at the opposite end. Locomotive firebox contents could be dumped into pits between the rails from locomotives once they were carefully positioned above them. Such locomotives then could move onto the Engine Shed area for overnight parking. Firebox fires would be re-lit when the locomotive was next needed in a day or so.Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencycoal hopper, echuca, echuca railway station, george coop collection, r-727, r-class steam locomotive

THE ECHUCA COALING STAGE. Locomotives would stop alongside to receive coal dropped into their tenders from small overhead rail mounted tipping trays. Water could be obtained from either the elevated tank at one end or the connected standpipe at the opposite end. Locomotive firebox contents could be dumped into pits between the rails from locomotives once they were carefully positioned above them. Such locomotives then could move onto the Engine Shed area for overnight parking. Firebox fires would be re-lit when the locomotive was next needed in a day or so.Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencycoal hopper, echuca, echuca railway station, george coop collection, r-727, r-class steam locomotive

The A2 class was an express passenger locomotive that ran on Victorian Railways from 1907 to 1963. The 996 arrived at the Port of Echuca in 1968 from Newport and was donated to the City of Echuca by the Echuca Lions Club & the Rotary Club who had purchased it for 1250 pounds. the A2 996 is displayed at the Echuca Wharf Railway Siding.A2 996 is one of the later batch of sixty A2 class express passenger locomotives built with superheating and other design enhancements including Walschaerts valve gear. it was constructed at Newport Workshops in 1916 and was among the last few A2 class remaining in service when taken off register by the Victorian Railways in November 1963. Steam Locomotive made of steel & wrought iron with black livery. Front- A2 996 /. Rear - 996a2 locomotive, echuca lions club/rotary club, wharf, echuca loco shed, shire of campaspe, newport workshop, rollingstock collection, steam trains

This Johnson Bros. (USA) Locomotive Type Boiler was from a steam shovel (that moved on rails) that excavated rock and soil during the construction of Stevens Weir near Deniliquin NSW in 1934. It has a working pressure of 100psi. This is an example of a fire tube boiler where the fire from the fire box heats the water surrounding the fire tubes running through the boiler, smoke escapes out the smoke stack and the steam is captured in the dome and sent through pipes toward other engines in the Port of Echuca Steam Display. Two glass gauges are fitted on the side of the firebox. Two safety valves are fitted at the top of the boiler to maintain the correct and safe pressure. It still functions today for visitors most days of the week.A good example of the technology and industrial history of the Riverina region of southern NSW and northern Victoria. It is an integral part of the Port of Echuca Steam Display running secondary engines off the steam produced within this boiler. Large cast iron, fire tube boiler with 124 fire tubes, fire box, steam dome and exhaust chimney. boiler, johnson bros, steam display, kevin hutchinson steam shed