Showing 378 items matching mask
-
Federation University Art Collection
Work on paper - Papercut, [Mask], c1994
This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007.Handcut work of Chinese origin.art, artwork, papercut, mask, chinese, available, pat hope, asian school -
Geoffrey Kaye Museum of Anaesthetic History
Equipment - Bellamy Gardner mask, 1908
H. Bellamy Gardner, an anaesthetist at the Charing Cross Hospital, was the first to use open ether in England and was responsible for popularizing the technique. Bellamy Gardner's mask consists of a wire frame which was covered with layers of gauze. He recommended constructing a face-pad consisting of several layers of gauze which were rolled together and tied to make an oval. This was applied to the face and the mask rested on the top. Ether was then administered directly on to the mask.Oval chrome-plated steel wire frame designed to fit around a face. The wire-framed dome has both vertical and horizontal wire components to sit over a patient's nose and mouth. Ether was applied to a gauze pad which was held securely in place by a hinged wire lid. This is a modified version of Bellamy Gardner's original mask.Etched on clasp: BELLAMY / GARDNER'S / ETHER MASKether, gauze -
Beechworth RSL Sub-Branch
Gas mask
This mask would have presumably been manufactred and used as a gas mask during World War One conflicts. It is presumably British made. It could also possibly date to the World War Two era.This item is a piece of protective equipment which presumably dates to the World War One era. As a surviving artefact from the Great War, this item holds historic value.Gas mask with rubberised light brown fabric face cover, plastic goggles for seeing, straps for fastening and a nozzle to attach to a canister. The canister is now missing. The goggles have corroded steel rings around themwhich protrude sloghtly from the mask. The light brown fabric covered rubber nozzle is attached to a black metallic component, which is attached to the mask with a circle of black rubber in between the metal and the mask. There is also another short piece of rubber attached to this black metallic component which is folded and positined between the nozzle and the mask. There is an inscription On the exterior of the mask, where the nose would ordinarilly be positioned. There is also an inscription in the interior on an almost full circular piece of fabric which is stitched into the same posion. This has a circle of metal stitched beneath it, which protrudes in two sections towards the wearers face. On the ends of the protruded sections are square pads of fabric, which are presumably there to position on either side of the wearers nose. The mask has a reinforces rubberised fabric rim where it would be incontact with the face. The main rubber nozzle protrudes through the inside of the mask, forming a mouth piece. There are four black straps and one light brown colour strap stitched to the exterior rim of the mask. Two of the black straps are severed.On the exterior at the nose: 3 On the interior at the nose: 22 109gas mask, mask, world war one, first world war, world war 1, ww1, wwi, the great war -
Geoffrey Kaye Museum of Anaesthetic History
Mask, Schimmelbusch, Elliott, c. 1930s
Curt Theodor Schimmelbusch (November 16, 1860 – August 2, 1895) was a German physician and pathologist who invented the Schimmelbusch mask, for the safe delivery of anaesthetics to surgical patients. In 1890, Schimmelbusch invented a mask for the delivery of anaesthetics to surgical patients. It was primarily designed for ether anaesthesia, but he also proposed its use for chloroform anaesthesia. Schimmelbusch designed a metal mask, over which a gauze could be stretched and secured. The mask was placed over the patient's mouth and nose, and anaesthetic was applied to the gauze, allowing the patient to inhale the anaesthetic as they breathed normally. Around the edge of the mask, a trough collected the residual anaesthetic, rather than allowing it to drip onto the patient's face.Oval shaped metal mask with a collapsible cross-shaped dome, hinged clamp and flat handleStamped into underside of handle: ELLIOTT SYDNEYschimmelbusch, mask, open method, chloroform, ether, german, physician, pathologist -
Bendigo Military Museum
Equipment - GAS MASK NON COMBATANT
A general civilian Gas Mask for protection against gas warfare agents, tear gas, mustard gas etc..1) Face gas mask, enclosed with clear plastic eye pieces, attached cylindrical gas filter canister, head straps. .2) Protective cover, shaped canvas bag with webbing carry strap with adjustment buckle. .3) Small instruction booklet, 16 pages..1) Warning and instructions information printed on cylinder. .2) On bag, “U.S Non Combatant Gas mask M1A2-1-1” .3) On front cover, “Your Gas Mask”gas masks, civilian, u.s -
Wodonga & District Historical Society Inc
Tool - Sieba Gordon Gas Mask - North East Water Authority, Siebe Gorman & Co. Ltd, c1960
This mask set is part of the North East Region Water Authority collection in the Wodonga Historical Society. Wodonga's drinking water and wastewater operations were originally managed by the Wodonga Waterworks Trust, which was established in 1897, after Wodonga became a separate shire in 1876. In 1923 a Wodonga Waterworks Trust referendum to provide funding for new infrastructure to supply more water of better quality to Wodonga was passed. This included building the Wodonga Water Tower and it was completed in 1924. It supplied water to Wodonga until 1959, when it was drained and decommissioned after the No 1 Basin on Huon Hill was completed in 1958. In 1983 the Wodonga Waterworks Trust and the Wodonga Sewerage Authority became part of the Wodonga Council. And by 1989 a filtration plant at Huon Hill was completed, which provided filtered water of improved quality to Wodonga, in accordance with the World Health Organisation’s guidelines. In 1994 the Kiewa Murray Region Water Authority took over the Wodonga Council’s water and wastewater operations, and then in 1999 the Kiewa Murray Region Water Authority combined with the Ovens Region Water Authority and became the North East Region Water Authority or NERWA. NERWA then became known as North East Water. Siebe Gorman was a British manufacturer of industrial respirators that served the mining industry, the chemical industry, and the agricultural industry from 1938 until the 1980s. The "Puretha" line refers to the canister included, which was designed to tackle industrial hazards.Siebe Gorman "Puretha" Type C Kit with Vista Vision Facepiece. The facepiece consists of a formed plastic lens held on by a white retaining ring that stretches around the rubber facepiece and is connected by two thumbscrew lugs. The exhale assembly is covered by a steel mesh.The hose is a standard industrial hose. The canister is attached by a khaki webbing material. An instruction sheet is included. The kit is a small leather case with two front latches. Safety instructions and chemical information on canister label. On label: EVERYTHING FOR SAFETY EVERYWHERE Date filled 28 DEC 1961 NO. 675 north east region water authority, gas mask, respirator, sieba gordon -
Beechworth RSL Sub-Branch
Gas mask, c 1942
This gas mask dates to 1942 in the Second World War. This mask is representative of a style of gas mask that was widely distributed during the Second World War, and can be found in other Australian collections. Rubberised face mask with two circular plastic windows with metal rim for sight by wearer. The mask is fitted by six black elastic straps with red and yellow stripes, which are attached via metal buckles at six points at the top, middle and bottom of the face. Straps converge on rubber backed fabric cross-shaped component which is stamped. Over mouth area is a filter comprised of several layers of metal sheeting with holes. At chin, a metal fitting fits into a black rubber concertina tube which fits into the top of a rounded rectangular container with ribbed edges. Both attachment points have what appears to be adhesive fabric tape wrapped around the closure, possibly to make the system air tight.On cross-shaped component, "No 410/22-12-42" Stamped on mask, "O.T.R.C/6/42", "NORMAL" Filter mask stamped with, "EBRO/1942", "No 4/G.P. 1942" Canister stamped with "WILLOW/[broad arrow]/ML42(?)3/GS174". On canister base "No4A/WILLOW/1942/257/EVI" gas mask, breathing apparatus, chemical warfare, second world war, world war ii, world war 2 -
Geoffrey Kaye Museum of Anaesthetic History
Bellamy Gardner mask with Ogston frame, post 1905
The Bellamy Gardner mask was in use by 1905 and was the first British mask for the open administration of ether. This mask combines the features of the Bellamy Gardner mask with a tower frame designed by Ogston. The Museum's "Penn catalogue", circa 1970, describes this mask: "this followed closely upon Ferguson's lead, but has an enormous amount of "dead-space" contained within the apparatus."Open wire ether mask with inner dome (Bellamy Gardner mask) and outer wire frame tower (Ogston frame).Moulded into connector clip: BRITISH MAKEbellamy gardner, ogston, open ether administration, henry peter penn -
Geoffrey Kaye Museum of Anaesthetic History
Mask, Yankauer, c. 1904
Sidney Yankauer, M.D. (1872-1932), an ear, nose and throat specialist and pioneer in bronchoscopy, practiced at the Mount Sinai Hospital in New York. Dr. Yankauer, a prolific inventor of medical equipment, might best be known for the tube he designed for suctioning the mouth and throat. Yankauer introduced the wire-mesh anaesthesia mask around 1904. The drop method involved placing the mask over the patient’s nose and mouth, and then placing gauze over the mesh of the mask. Next, liquid anaesthetic, such as ether or chloroform, was applied in drops or lightly poured onto the gauze so that the patient breathed in evaporated anesthetic as well as air. The gutter around the base of the mask was designed to catch any residue of the harmful anaesthetic. (The Wood Library Museum, 2016; Museum of Healthcare Kingston, 2016)A metal tear-shaped mask with gauze wire dome, gutter around the base and detachable spring piece with open circular handle to secure cloth over gauze. Found inside medical carry box #899Stamped underneath neck of circular handle: HATRICKdr [e.s.] holloway, hatrick, yankauer, drop method, mask, gauze -
Ringwood RSL Sub-Branch
Equipment Gas Mask, 1940
00215.1 Gas Mask 00215.2 Gas Mask carry bag00215.1 PBC 27.2.40 Lot 193 00215.2 US noncombatant gas mask M1A2-1-1 Child -
Ringwood RSL Sub-Branch
Equipment Gas Mask, 1941
Gas masks issued to warders and soldiers00206.1 Gas Mask 00206.2 Gas Mask bag with rear pockets and shoulder carry strap00206.1 EIV.W4A7 00206.2 1941 V1 -
Shepparton RSL Sub Branch
Gas Mas, German Gas Mask in can
-
Frankston RSL Sub Branch
Gas Mask, German World War One Gas Mask and metal cylinder container, 1917
-
Frankston RSL Sub Branch
Gas Mask, German World War 1 Gas Mask
-
Frankston RSL Sub Branch
German Gas Mask Metal Cylinder Container, German World War 1 Gas Mask Container, 1917
Metal cylinder with hinged lid. Internal surfaces painted with black enamel paint. External surfaces painted olive green. None apparent -
Federation University Art Collection
Ceramic, Nicole Murray, Mask, 1990
This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007.Ceramics (raku) and burnt Woodart, artwork, sculpture, portrait, clay -
Moorabbin Air Museum
Manual (Item) - Walter Kidde components Valves/Horn/Hose/regulator/gauge/mask - IPEC Aviation
-
The 5th/6th Battalion Royal Victoria Regiment Historical Collection
Photograph - Frame Photopgraph, Members of 5/6 RVR during an exercise wearing gas mask
Coloured photograph with wooden frame showing soldiers of 5/6RVR -
Linton Mechanics Institute and Free Library Collection
Book - Novel, Chambers, Robert W, The cambric mask, 1900
v. ; 325 p. : dark blue-black cover, with title embossed in gold. Title and author's name embossed in gold on spine. fictionfiction, robert w. chambers, kaleno/pitfield mechanics' institute -
Moorabbin Air Museum
Accessory (Item) - Oxygen Mask RAF Type P/Q (Incomplete)
-
Moorabbin Air Museum
Uniform (Item) - Demand Oxygen Mask Type A-14-A Medium
Possibly used by 10 SQN -
Melbourne Tram Museum
Pamphlet - Hanging strip type notice, Public Transport Victoria (PTV), You must wear a face mask while travelling, 2020/21
Provides tram information for Covid-19 pandemicProvides information for Covid safe travel on trams. Contains a link for further information. hanging strip type notice tramways, health, covid-19, qr codes, passengers, behaviour -
Geoffrey Kaye Museum of Anaesthetic History
Photograph
Colour photograph of a Coutt's mask lying on a wooden table. The mask has a circular and made of metal and there is a small metal loop on the side of the object. Two thin metal hinges with screws are curved from one side of the mask to the other, and stuck on one hinge is a blue label with P.3.6 printed on it. Inside the mask is a metal mesh grill. A reddish brown residue like rubber and paper is stuck around the rim of the mask.anaesthetic equipment, coutt's mask, mask -
Geoffrey Kaye Museum of Anaesthetic History
Photograph
Colour photograph of a Coutt's Mask lying on a wooden table. The mask is circular, made of metal and has a curved opening with a raised lip that is resting on the table. There is a small metal loop on the mask and a thin metal hinge with screws is curved from one side to the other. A reddish brown residue like rubber is stuck around the rim of the mask.anaesthetic equipment, mask, coutt's mask -
Geoffrey Kaye Museum of Anaesthetic History
Mask, Wire, Murray
Triangular shaped mask with hinged arm at point of triangle that connected to upper wire section via a hook. Known as Murray's Mask and used for the administration of chloroform. Mask is covered with linen (gauze) cloth onto which chloroform would be dropped.mask, murray, chloroform -
Bendigo Military Museum
Equipment - GAS MASK, Mask: 27.6.1941; Canister: 21.11.1941
Item re Frederick Gardner DAVEY DFC No 410533 RAAF. Refer Reg No 3536P for his service details.Gas mask with brown cloth covering & rubber face cover. 2 circular, clear, glass eye pieces with threaded mounts. Mask is secured to head with black elasticized straps. Metal breathing plate is attached to a red metal canister via a black ribbed rubber tube. Side port on LHS face mask. Port is covered with a black cap. Printed on head straps: No 4 MK(2) 6/41 PAT. Nos 296463 & 305080 Printed in black under chin & face mask: ? L(above)2 ? & Co. SMAL SPEC (?) T.MIC LOT No 198 ? 27/6/41 Stamped on top of canister: Z 21/11/41 AT Stamped on canister base: No 4A M 1941 U6 EVIequipment, gas, masks, military -
Trafalgar Holden Museum
Functional object - Gas mask in bag, 1942
Gas mask contained in a canvas bag manufactured and used during the second world warBag manufactured by GMH 1942Canvas bag with webbing strap, canvas cover, with brass press studs. Inside bag gas mask with items for maintaining the mask.V11 GMH 1942military, bag, gas mask -
Ballarat RSL Sub-Branch Inc.
Memorabilia - Gas Mask, 1939
WW2 General Service Respirator (GSR) Gas Mask WWII made in 1939 and the Canister was made 1941. Mask made of black rubber with glass eye slots with metal rims. Metal nost piece. Covered in khaki fabric. Elasticized straps to hold mask in place, with a tan circular cloth covered rubber tube that connects to the canister. Tin canister is oval shaped reinforced with ridges, red/brown in colour.Back of mask: N-4II / ML M MAY 39gas mask, equipment, gas warfare, second world war, world war two, world war ii, mustard gas, chemical warfare -
Federation University Art Collection
Painting, Antonion Muratore, Adam and Eve’s Property Settlement, 2002
Antonio MURATORE (1947- ) Born Reggio, Cagliari, Italy arrived Australia 1952 After completing studies at the Preston Institute of Technology and RMIT, Antonio Muratore studied and taught in India and Europe returning ti Australia in 1985. Antonio Muratore lectured in printmaking at RMIT IN1887 before taking up a residency at the Rigalto Print STUDII IN umbra, Italy. Since 1992 Muratore had worked between Perugia and Melbourne.Framed artwork of two people holding masks.mask, hats, available -
Shepparton RSL Sub Branch
Gas Mask, c. 1910s
This filter is part of a complete set of a German gas mask dating to the First World War. This may have been a spare filter which was attached to a mask.Khaki coloured gas mask with leather face mask component. Two metal circles border plastic lenses of goggles which in turn have wire frame behind. Gas mask twists onto filter component which is a metal cylinder shape with layers of metal mesh inside; filter is removable. Mask has canvas band on interior for sweat absorption or comfort; attached to which are six straps which converge into loop at back of head.german, germany, world war i, world war 1, first world war, the great war, chemical warfare, gas mask, gas warfare, mustard gas