Part of the Cooper Collection. See Catalogue No. 9586.2 for details of service, No. 3798359, "Keith Cooper".Shield shaped brown coloured wooden plaque with gold and silver coloured RAEME insignia. Silver coloured metal banner underneath insignia with silver lettering on a green background. Gold coloured metal plate with black lettering below banner. Plate secured with two small nails.Engraved in black lettering on gold coloured plate: 'Presented to CPL. K.E. COOPER, 5 Jun 81.cooper collection, keith cooper, raeme, plaque, melbourne workshop company

The shed behind Purdy’s was the mechanics’ workshop. The logging trucks, jinkers, bulldozers and fleet of 5 delivery trucks were serviced here. Two motor mechanics were employed full time.The Briar Hill Timber and Trading Company was active during the 1930s - 1950s during the development of the local area with many houses being built by owner-builders who used the company for their needs. A group of 4 black and white photographsbriar hill timber and trading company, briar hill timber, alison lendoudis, bob manuell, sherbourne road briar hill, squire family, purdys furniture briar hill

The FS-24 Phonix is the first sailplane design to be built using a moulded fiberglass sandwich technique. It was designed by Hermann Nagele and Richard Eppler leading a group setup for the purpose at Stuttgart Technical University in the early 1950s. Initial construction was undertaken at workshops of Wolf Hirth and the first prototype was completed at the Bolkow Aircraft Company where Nagele and another member of the group, Rudi Lindner, had gained employment. It flew on 27 November 1957. Two further prototypes were built incorporating a T-tail and other refinements. Eight in all were built before production was stopped in 1961. A number of gliding records were broken in Phonix sailplanes in Germany in 1962-1963. It was found to have a best glide ratio of 40:1. The Museum’s example, No. 403 was originally a prototype built on 25 May 1960 [Registration D-8354]. It was converted at Bolkow to a Phonix T in 1963 and sold to a private owner in Switzerland [Registration HB-746] and later then to gliding club Segelfluggruppe Solothurn in 1965. The glider returned to Germany in 1971 (Meersburg) and re-registered as D-0738. It moved to a new owner in Allershausen in 1976, and again to Lindhoft in 1982. In 1983 the glider was sold to owners at Hasselt, Belgium and given registration OO-ZQD. In 1989 a further change of ownership occurred and the glider went to Leusden in the Netherlands where it was registered as PH-949. In 2006 the Phonix No.403 was imported into Australia by John Ashford of the Geelong Gliding Club. On 30 January 2007, it was registered as VH-GRP. However, as at January 2016 it has not been flown in Australia. In the course of its flying history the glider was damaged several times and repaired. At one stage a larger rudder was fitted and later on this modification was reversed. With the original conversion to a Phonix T and subsequent repairs and changes to equipment the weight of the airframe increased from 182 kg to approximately 220 kg. Nevertheless, the wing loading is a modest 20kg/square metre. As at January 2016, minor repairs and airworthiness certification are required to return the glider to flying condition. This exhibit is highly significant as it is one of only eight of this pioneering sailplane design. It is the only one in Australia. Glassfibre single seat sailplane, finished white with blue stripes on fin and rudder.Australian registration GRP on rudder; Serial Number 403 and Vintage glider club of Netherlands plaque in cockpitaustralian gliding, sailplane, glider, fs-24, phonix, nagele, eppler, lindner, stuttgart technical university, bolkov aircraft company, segelfluggruppe solothurn, ashford, geelong gliding club.

Victorian Railways Centenary 1854-1954 100 years of service booklet. Printed in glossy paper, page 1 contains article of 'condensed from a history of the Victorian Railways' which compiled by L.F. Harrigan. The contents include topics of Early private railways (1846-1878), The Melbourne and Hobsons Bay Railway Company - Gala opening, The Victorian government railways four periods of time (during 1856-1864, 1865-1911, 1883-1954, 1950 -1960). Photos inside include the seal of the Melbourne and Hobson's Bay Railway Company, South Yarra station 1874, opening of the Geelong and Melbourne railway June 25 1857, a hotel advertisement of 1857 featuring the Geelong and Melbourne railway - showing 'the British hotel Corio St Geelong, Spencer St station in 1872, the Taradale viaduct, on the Bendigo line in 1864, Harcourt station in 1865, Spirit of Progress, train on the Gembrook line. 1908 steam trains between Flinders St and Richmond the first electric train in Australia on a test run 6.10.1918, moving wheat by train 1901. The aircraft fuselages at Newport workshops during WWII, Bren gun carrier. Newport workshops at Queen Elizabeth Spencer St station 1954. The newsletter published by the Victorian Railways Public Relations and Betterment Board by the direction of the Commissioner.book, magazine, victorian railways, victorian railways / compiled by l.f. harrigan / -the melbourne and hobsons bay railway company - gala opening / south yarra station 1874 / published by the victorian railways public relations and betterment board by the direction of the commissioner

Documents. Connelly, Tatchell & Dunlop - Legal Papers. 1 - 1886 - Letter from Arnoldt D W, Wedderburn. 2 - 1886 - Letter from Cuthbert & Co, Law & General Stationers, Lithographers & Printers, 55 Chancery Lane. 3 - 1886 - Letter from Pickles Thos P, Railway Workshops, Newport. Letter has letterhead - G F Pickles & Sons, Carriage Manufacturing Company Limited. Manufacturers of Carriages, Buggies, Pleasure & Business Wagons. Importers of American and English Carriage Materials. Sandhurst. Repository & Show Rooms, Latrobe Street West, Melbourne. 4 - 1886 - Letter to Spence James, Gannawarra, Cohuna from Bennett, Attenborough, Wilks & Connelly, Solicitors, Albion Chambers, Sandhurst. Also contains returned reply from Spence James. Mentions Geugnagel Charles, Baker, Sandhurst. 5 - 1886 - Post Office Telegraph from Kilbride Peter, Rochester to Wilkinson, Albion Chambers re Brown & Ellison case. 6 - 1886 - Post Office Telegraph from Bennett & Co, Market St re Sterry & Trestrail.cottage, miners, connelly, tatchell & dunlop, arnoldt d w, cuthbert & co, pickles thos p, g f pickles & sons, spence james, bennett attenborough wilks & connelly, geugnagel charles, kilbride peter, wilkinson, brown, ellison, bennett & co, sterry, trestrail

This ornate, Victorian-era automatic weighing machine was made in England around 1884-1909, by George Salter and Co. of West Bromwich, UK, makers of scales since 1760. It is protected by Queen Victoria’s Royal Letters Patent, signed in 1900. The scale stood outside the Warrnambool Post Office in Timor Street from around 1909 to 1966, as shown on postcards and photographs held at the State Library of Victoria. The scale is identified by the Serial Number '665', and was installed by the distributors, the Australasian Automatic Weighing Machine Co. Ltd.. The scale’s weight measurements were in Imperial stones and pounds up to 20 stone (127 kg). The scale’s face included charts of average weights, for men, women, boys and girls, by various heights, in feet and inches. The coin slot and its face were converted to metric measurements by the Eastern Scale Company Pty. Ltd; that firm was registered on October 2, 1974. The Australasian Automatic Weighing Machine Co. Ltd was a large supplier of weighing scales in Australia and held the Royal Letters patent for their machines, distributing them in prominent locations. In 1902, the firm was listed under the Import Entries Passed at His Majesty’s Customs, importing into Sydney, NSW, eight cases of scales. In 1911, the company asked permission from the Port Pirie Corporation to install a machine in Alexander Street. In 1913, the company applied to the City of Sydney to install machines around the city, including at the tram depot. One application mentions “… three machines in three places for three pounds per year”. In 1923, the firm tendered for the right to place Automatic Weighing Machines on railway and tram premises throughout New South Wales, subsequently for five-year terms, in return for a fixed payment per machine and a portion of the revenue to the NSW Government. In 1928, the Sydney Harbour Trust gave the firm the right to place the weighing machines on various ferry jetties. The firm was still operating in 1941, advertising for two boys aged 14-16 for the workshop and messages, at the Rialto building, 497 Collins St., Melbourne. On December 21, 1946, the Commonwealth government invited offers to tender for the right to place automatic weighing machines on postal premises throughout the six states; the successful company then made arrangements with the federal Postmaster General's Department to place machines outside post offices across the country. A few years later, on September 11, 1950, the firm's Adelaide branch ceased trading. From 11th July 1950, the Australian and Eastern Engineering Company Pty. Ltd took over at the same premises, at 179 Pirie Street, Adelaide. The Perth branch ceased business in WA on July 6th, 1950. Percival Everitt invented and patented the automatic, coin-operated personal scale design. Everitt was a Norfolk-born engineer and regarded as the father of the coin-operated industry. As a young man in 1877, he invented a hay and corn pitcher, a turnip thinner in 1878 and an Automatic Travelling Anchor in 1880. But his fame came in 1883 with the first postcard-vending machine, over a hundred of which he distributed around London. In 1884, he patented one of his many inventions, the coin-operated scales for use in public places; for many people, it was their first exposure to coin-operated machines. His success prompted the formation of the Weighing Machine Company in 1885. Further inventions followed: a blow tester in 1887, the machine for testing a person's grip in 1888, and in 1889, the dispensing machine for hiring out opera glasses, and a device for shutting down the coin entry slot if the machine was empty. In 1890, he invented a fortune-telling machine. Everitt sadly did not make his fortune; he died suddenly in February 1893, in his late forties, with £71 to his name. George Salter & Co., West Bromwich, England, produced automatic weighing scale machines from Everitt’s patented design, and advertised them as suitable for hotels, pleasure gardens, theatres, exhibition halls, clubs, baths and places of public resort. The company was established in 1760 by brothers Richard and William Salter, and manufactured springs and pocket steelyards (spring balances). After several generations, the company was taken over in 1855 by a nephew, George, and renamed George Salter & Co. In 1884, Salter registered the trademark of a Staffordshire knot pierced by an arrow. The company's expanded range of products included the first coin-operated public weighing machines in the 1880s and, in 1895, the first English-made typewriter. In 1915, Salter became a limited company, Geo. Salter & Co. Ltd. When the last George Salter died in 1917, the company passed into the hands of other relatives, but continued to grow before being bought out by Staveley Industries in 1973. Despite several subsequent mergers, the Salter name continues to be seen on household products such as digital scales. This patented, coin-operated weight machine is significant for its association with Percival Everitt, the inventor of the world’s first slot machine, with the renowned maker of scales, G. Salter & Co., which began operating in 1760, and also with the Australasian Automatic Weighing Scale Co., which imported and widely distributed the scales throughout Australia from the early-to-mid 20th century. It is a rare example of an early vending machine used in public places from the late 19th through to the mid-20th century. These machines were the early step in the evolution of coin-in-the-slot machines, which are still used today. The scales give a glimpse into our history; they became quickly popular with the public, which, until then, had little access to weight scales apart from those at medical services. They also provided inexpensive entertainment for families, especially while waiting for trains or visiting the post office. The machines were also attractive and lucrative to the distributors; once installed, they required very little maintenance, and their low cost to customers kept the money coming in. This automatic weighing machine is also significant for its decades of service to the local and regional community of Warrnambool, for personal and commercial purposes. A public coin-operated weighing scale, also called a penny scale. It is a large, silver-painted cast metal stand with a square top on a pedestal that flares outwards to join a rectangular platform base with posts on the side and corners that may have had fitted wheels. The round, white face on top has red and black measurements and inscriptions. A slim indicator with a point at one end and an arc at the other is attached to the face’s centre. The coin slot is above the face, on the left, and the scale’s identification number is engraved on an oval plate on the right. Moulded motifs decorate the pedestal’s front and are repeated on its sides; they depict a tall, narrow urn with a bowl on top and fancy scrolls on either side. There is a decorative panel across the front top of the stand. The top of the pedestal has a small keyhole. The size of the coin slot fitted a penny coin, and the weight measurements on the face were in Imperial stones and pounds. Quite some time after 1966, when Australia introduced new decimal weights, measurements and currency, the scale was updated; the coin slot size was changed, and a new face with metric measurements was installed. The scale now accepts a $1 coin (one dollar) and the scale measures weight in kilograms and grams, from 0 to 125 kg.. The rear of the scale has a small, rectangular metal plate with printed text. The scale was made by G Salter & Co. of West Bromwich, UK, distributed by the Australasian Automatic Weighing Platform Co., and updated to metric measurements by Eastern Scale Co. Pty Ltd. It was previously installed at the Warrnambool Post Office. Engraved on an oval plate on the right: "665" Top centre of the face, in red: "$1 coin" Top of face: "EASTERN SCALE CO. PTY LTD" Base of face, in red: "[Royal Coat of Arms of Britain]" with words, below in red: "BY ROYAL LETTERS PATENT" Around the face, in black: "[numbers 0 to 125, in increments 5, and makes between the numbers for each 500g]" "kg" Below the face, moulded letters within a shield: "AUSTRALASIAN AUTOMATIC WEIGHING MACHINES CO. LTD." At the back of the weighing platform: "G SALTER & CO. / WEST BROMWICH", remnants of logo “[Staffordshire knot pierced by an arrow]” Plate on rear: THIS SCALE REMAINS THE PROPERTY OF EASTERN SCALE CO. PTY. LTD., 8 GEORGE COURT, GREENSBOROUGH, VIC, 3088. PHONE (03 ) _ 34 _ _ 33” (434 9333 ?_flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum and village, shipwreck coast, great ocean road, scale, weighing scale, salter, australasian, 1 dollar, $1 coin, 1p, 1 penny coin, penny scale, coin in slot scale, eastern scale co. pty. ltd., british royal coat of arms, royal letters patent, letters patent, health, ending machine, coin-operated machine, percival everett, weighing machine co., george salter & co., g salter & co, west bromwich, vending machine, weights & balances, measurements, slot machine, coin operated machine, penny-in-the-slot, coin fed, coin op scale, weights & measures, australasian automatic weighing machine co. ltd., warrnambool post office, machine 665, no. 665, blalnce technology, scales and weights, weights and measures, penny weight scales, vintage, weighing machine, coin in the slot, coin operated, public scale, public weighing machine, penny-weighing machines, penny weighing machines, penny scales, coin operated weighing machine, scale weighing machine

.1 - Book - 20 pages + light grey cover, side stapled, issued by the British Engineering Standards Committee, British Standard Specification for "Keys and Keyways". Dated April 1918. Has standard Number 46-1909. Provides materials specification, testing and an index. .2 - Book - 16 pages + light grey cover, cotton stitched on side, issued by the British Engineering Standards Association, British Standard Specification for "BS Fine Bolts, Hexagon Bolts, Set Screws, Nuts, split-pins, washers and studs". Dated Feb. 1925. Has standard Number 191-1924. Provides materials specification, tables, and an index. .3 - Book - 8 pages + light grey cover, cotton stitched on the side, issued by the British Engineering Standards Association, British Standard Specification for "Identification colors for Engine Room Piping". Dated May 1929. Has standard Number 3011-1924. Provides index and colours of piping to be used and Identification. .4 - Book - 16 pages + light grey cover, cotton stitched on side, issued by the British Engineering Standards Association, British Standard Specification for "BS Whitworth Bolts, Hexagon Bolts, Set Screws, Nuts, split-pins, washers and studs". Dated Feb. 1925. Has standard Number 190-1924. Provides materials specification, tables, and an index. Document scanned as a pdf 4/2025..1 has the stamp of the "Tait Book Co. 90 William St. Melbourne" on the lower edge and in the top right corner, the ESCo Ballarat company stamp. .2 - has the stamp of the Standard Association of Australia, endorsing the document as an Australian Standard, B49-1932, and has the ESCo Ballarat company stamp with dated 17 April 1934. .3 - has the stamp of the Standard Association of Australia, endorsing the document as an Australian Standard, F1 - 1931, the label of "J. Ewins & Sons, Booksellers, Ballarat on the lower left-hand corner of the cover and the name "R. S. Coy"? in pencil on the top right-hand corner. .4 - has the stamp of the Standard Association of Australia, endorsing the document as an Australian Standard, B48-1932 and has the ESCo Ballarat company stamp with dated 17 April 1934.trams, tramways, engineers, bolts, power station, workshops

Possibly ex Victorian Railways Newport workshops Supplied by Bevan & Edwards Machinery Merchants, Melbourne Sebastian Lathes Described by its makers as the Utility School, Garage and Repair-shop Lathe, the machine immediately below, a Sebastian 15" (circa 1910 - 1926) was the Company's cheapest offering and, in its basic form, lacked a compound slide rest, the tailstock did not set over for taper turning and the bed lacked a gap. However, a friction-type countershaft unit was included in the price as well as a tool post, faceplate, drive plate, changewheels for screwcutting and a small tool kit. As with modern cars (especially BMW) everything worthwhile was on the options' list and by spending more it was possible to specify all those small but important extras. Although in its lowest-cost form this model was reduced to the fundamentals required for a useable, screwcutting centre (engine) lathe it was still reasonably specified and would certainly have fulfilled many requirements when installed in a school or training workshop. The true swing was 15.25", it was properly backgeared and screwcutting was through a conventional tumble-reverse mechanism that allowed both left and right-hand powered movement to the carriage by altering the position of just one lever. As standard it accepted 40" between centres, but any capacity could be ordered, in foot intervals, up to a maximum of 88" - when it is hoped that a central bed support might have been included …… The spindle, which ran in white-metal bearings, had a useful 15/8" hole and a No. 3 Morse taper centre. Some models appear to have had the leadscrew clasp-nut lever on the right-hand side of the apron, while on others it was positioned to the left.. Early Sebastian 13-inch lathe Typical of the Centre or "Engine" lathe made by many manufacturers from the late 1800s until the late 1930s, the basic flat-belt drive Sebastian, with separate countershaft, was eventually relegated to the economy end of the Company's range by the introduction of geared headstocks and self-contained motor-drive systems.Historic - Industrial Machinery - Gap Bed Lathe - Possibly ex Victorian Railways Newport workshops - Purchased and supplied from Bevan & Edwards Gap Bed Lathe - Grey with raw steel parts and a timber cupboard with gears and tools. Bevan & Edwards PTY,LTD Machinery Merchants Melbourne (possible government tag) 365bevan & edwards pty,ltd machinery merchants melbourne, puffing billy

Col. Harley Tarrant was an astute businessman and a part-time soldier. He was born at Clunes in 1860 and as a young man worked with an engineering firm in Sydney. He later joined the Board of Works in Melbourne. and later entered the early car manufacturing and retailing trade. In 1905 Harley Tarrant built the first car to be built and sold in Australia. For a time he was a surveyor and worked in Surrey Hills but motoring became his prime interest. In the early 1890s he set up a workshop in what was then Post Office Place, Melbourne. He built stationary engines which ran on kerosene and in the first years of the twentieth century, with partner W Howard Lewis, built the first petrol driven car in Australia. This photo is of his sixth car and was taken after the finish of the 1st Sydney to Melbourne Dunlop Reliability Trial, which Tarrant won. Harley Tarrant produced cars between 1901 and 1907 at the Tarrant Motor and Engineering Company in Queen's Bridge Street, South Melbourne. The first car had a rear-mounted two-horse power Benz engine. Two-cylinder models were later produced followed by 4-cylinder models. The only Tarrant car in existence in 1984 was owned by Harley Tarrant's grandsons, Kenneth and Peter Holmes of Melbourne. The 1906 Tarrant car featured on an Australia Post stamp in 1984. It was one of a series of 5 stamps featuring Australian veteran and vintage cars.Black and white photo of a car without a hood in the driver's seat of which is a man with cap, driving dust coat and goggles, identified as Harley Tarrant. Beside him is a young girl in a large frilly; she is identified as Doreen Tarrant, his daughter. Another man with cap and goggles is talking to him and a gentleman in a bowler hat looks on. There is a women and 2 children in the background in front of a large brick wall decorated in two coloured bricks. cars, inventions, dunlop reliability trial, tarrant motor and engineering company, mr harley tarrant, miss doreen tarrant, mrs doreen holmes, col harley tarrant

Photos of the Lantern Festival workshop held to pull the community together during the battle to save Big Hill from the mining Companies application to have an "Open Pit Mine" in 1998-1999. Master lantern maker Graeme Dunstan coordinated the work shops, with financial support from the "Big Hill Action Group". when the decision from Victoria State Government was given, the group celebrated by carrying lanterns from Gold Reef Hall - near the Post Office up to Big Hill.Seven colour photographs of the Lantern festive workshop at Big Hill in c 2000. Taken by Jim Melbourne stawell

Adapted, produced and acted by members of the HTC Youth Group, Heidelberg Theatre Company Youth Workshop, The group was formed under the umbrella of the Heidelberg Theatre Company. A Saturday morning Acting Workshop for children aged 7 to 14 years was organised and run by Alice Bugge at the Theatre and a production was mounted bi-annually under her direction.from the 1980s until 2001. All items in good conditiondirector alice bugge, cinderella, youth workshop, htc, heidelberg theatre company

1977, 179, city of heidelberg repertory group, heidelberg theatre company inc, directed by alice bugge

1967, 110, city of heidelberg repertory group, heidelberg theatre company inc, director marcel cugola, workshop on stage movement

Photo shows one of the A class tramcars originally built for The Prahran & Malvern Tramway Company in 1910-11, then transported to the isolated Footscray System in 1923-24. Most were withdrawn between 1928 and 1931. Yields information about original A class trams.Black and White photograph of MMTB A Class 3 at Preston Workshops. DerelictOn rear in ink - "MMTB A3 (ex A8) Preston WS – RWO Pearson"tramways, trams, preston workshops, original a class tram, a class, tram 3

Folder - presentation white card - with printed gold front with large round tab on the right hand side, with the words "Goninan Quality" on the cover. Inside are papers: 1. Welcoming the members of the Australian Electric Traction Association - AETA - for a tour of the Preston Light Rail Facility on Friday 10 November 1995, including a very prelim sketch of a Hong Kong light rail vehicle, newspaper cuttings about overseas contracts for the Hong Kong - Kowloon Canton Railway. Includes notes on Howard Smith Company, the owner of Goninan at the time. 2 - Copy of Goninan News - No. 78, July / August 1995 - all locomotives. 3 - Pamphlet on Goninan - activities, Victoria operations - Double Deck train for Melbourne, Sprinter Rail Cars, City Circle Trams and Driver Only trams. Gives contact details. 4 - Press Release - about Goninan & Co being successful for the building of up to 120 locos for the National Rail Corporation - dated Thursday 5/10/1995.trams, tramways, goninan & co., light rail, hong kong, preston workshops, aeta, tours

Series of seven The Connies Collectable Cards for 2017 Each card features a photograph with a story or details of the image or person on the reverse. Produced by The Connies, Melbourne, with a Leunig sketch on the rear and The Connies logo, with some having the MMTB and the Calcutta tramway company logo. The rear of the card gives the story behind the photograph. .1 - Paribesh Bandhu tram - Calcutta .2 - Tom's Tram - Fitzroy farm dog - featuring 1036 and a "mutt" .3 - Montage of a Calcutta tram 498 and Melbourne 980 side by side - Tramjatra .4 - Painted trams - Calcutta 649 - Sundari Sunrise Tram .5 - Montage of Melbourne 892 (route 78) and Calcutta 657 .6 - Lin Onus Tram - 829 - Transporting Art 1992 .7 - Norm Cross - with workshops and tram 1011 (image) - Darebin's Australian'strams, tramways, tickets, the connies, mmtb, conductors, cable trams, calcutta, preston workshops, tram 1036, tram 892

Report - typed carbon copy - 35 foolscap sheets bound within a brown card folder, drawings, charts, secured with fold back clips, with adhesive tape binding on the outside. Titled "Wheels - 28" Wrought Steel - 1948 Rolling - Contract No. 1380", dated 24 September 1951, prepared by the MMTB Testing Department, Report No. W4/1/287. Gives details of the extensive testing done on a batch of wheels rolled by Commonwealth Steel Company Newcastle, approx. 450 wheels had been ordered. Includes details of manufacture, testing, chemical analysis, dimensional check, hardness and service details. Has many appendices, giving details of the wheels.trams, tramways, preston workshops, reports, specification, wheels, tramcars

Sixteen page book plus card covers titled "The Reconstruction of The Victorian Provincial Tramways", an illustrated account of the Victorian provincial tramways prior to and after take-over by the State Electricity Commission of Victoria and the work done to rehabilitate them for further service. Compiled by Bob Prentice, published by the Haddon Tramway Workshops 1976. Outlines the creation of the SEC, the takeover of the private companies by the SEC and the question who would run their tramways, the condition of the tramways at the time of the SEC takeover, reconstruction work and maps of Geelong, Ballarat and Bendigo. Has a line drawing of Geelong No. 4 on title page.Has a $2.50 sticker in the top right hand corner.trams, tramways, ballarat, bendigo, geelong, secv, reconstruction, maps

Photocopied A4 document, 8 sheets, stapled in top left hand corner, titled "Allocation of Tramcars as at 5-5-1983", listing the class of trams allocated to each depot in Melbourne, MMTB, training trams, storage, special purpose trams, summary. The last page has a an extract from page 97 of the June 1983 issue of ET giving a bus fleeing location of the MMTB and notes on Private Bus companies and services. Has been photocopied onto A4 sheets - and published as a supplement to E.T 6/83. Has a stamp of the Road Construction Authority of 25 august 1983 Library on the front sheet. 2nd copy added from donation of Norm Cross. 1519.1 - 12 A4 sheets, were stapled in top left hand corner, titled "Workshops and Running sheds Branch - Allocation of Tramcars 4-4-1983". Sheets 1 to 5 - Allocation of Tramcars in Numerical Order including listing of tramcars for storage and disposal and storage and retention in operating condition. Letters against trams possibly withdrawn, hand written changes and additions to the Z3 class fleet to 220, Sheets 6 to 11 - allocation by depot showing some crossed out in red including trams in workshops, reserve trams, Approved disposal, training, tourist, special purpose, Ministry of Arts and decorated cars. Sheet 9 - distribution list. 1519.2 - full copy unaltered from Robert Green, added 6/7/2019 - see 1519i3.pdf for scanned copy.trams, tramways, tramcars, mmtb, lists, depots, depot allocation, transporting art, buses

Annual Report - 68 pages + card covers, printed on slightly textured paper. with the MTA logo imprinted on the front cover. Has a table of contents. Dated 31/10/1988, with letter to the Minister Jim Kennan, from the Chairman John King. Managing director Kevin Shea, Board members - Norm Maddock (part year) and Greg Rodgers representing the Union. Includes a review of the organisation, fares, various strategies, opening of the Northcote bus workshops, the AVM system, subsidiary companies and detail of finances.trams, tramways, annual reports, the met, public transport, mta, personnel, avm, funding, buses

Set of some 10 items issued by Alstom around the time they became responsible for the operation or the facilities manager of Preston Workshops and other corporate materials. .1 - Letter dated 3-7-2002 to all employees as the Preston Workshop and Press Release advising that Alstom was the successful bidder for the Facilities Management of the workshops. .2 - document - 4 sheets - titled "Alstom Citadis Tram Presentation - Preston Workshop August 7, 2001" - PowerPoint slides by Dan Davies introducing the C class tram. .3 - Large foldout folder or pamphlet titled "Citadis the spirit of your city" introducing the tram. .4 - DL four fold pamphlet - "Citadis at your fingertips, the spirit of your city" with information about the various types of trams. .5 - Folder with company name printed on a label, containing four sheets: Citadis for Yarra Trams Ballarat Railway Service Centre Alstom Melbourne Transport Limited - asset management for Connex Alstom's New Preston Service Centre Launched - 27-8-2002 .6 - Book - Alstom Australia and New Zealand Capabilities and Profile 2001 - 36 pages + card cover with high gloss photos. .7 - Plastic bag with company name, logo and website.trams, tramways, alstom, preston workshops

Series of two The Connies Collectable Cards for 2018 Each card features a photograph with a story or details of the image or person on the reverse. Produced by The Connies, Melbourne, with a Leunig sketch on the rear and The Connies logo, with some having the MMTB and the Calcutta tramway company logo. The rear of the card gives the story behind the photograph. .1 - W11 Karachi Tram - Z81, gives story on the rear. Image by Norm Cross. .2 - Tramjatra Tram - for the 2017-18 Melbourne Festival Arts Trams. Image by Craig Allen Tram 2007 - see Reg item 2581.trams, tramways, tickets, the connies, conductors, calcutta, preston workshops, transporting art, art trams, tram z 81, tram 2007

George Kyriakides migrated to Australia on the 1 January, 1948, leaving his home country of Cyprus for the promise of new opportunities in Australia. His silversmith skills were learned from a young age, working with his father to supplement the family income. The Saracen Plate Company was founded in 1952, from small beginnings in the garage of his family home in the Melbourne suburb of Malvern. The business grew quickly and facilitated the purchase of the property at 152 Lygon Street, Carlton. This original dwelling on the site was demolished and rebuilt as both a workshop and living space for the growing Kyriakides family. The business was primarily a wholesale manufacturer and supplied prominent Victorian department stores and Jewellers, such as Myer, Dunklings and Prouds. The Saracen Plate Company specialised in a style of silver plate known as 'Sheffield Reproduction', which featured in many homes as commemorative gifts or serving ware. (Hunter, A. (2017) Saracen Plate Company - Lygon Street Carlton 1952-1974 in Museums Victoria Collections https://collections.museumsvictoria.com.au/articles/15804) The origins of this item is unknown although it was possibly either a gift or purchased by the City for use. Silver plated ice bucket with lion head handles and braided trim. Missing insert.On base; Saracen reproduction. Silver plated. city of greater bendigo corporate gift, george kyriakides

Document titled "Preston Workshops Production List" setting out the number of trams being worked on at Preston Workshops, 15-12-1997. Gives tram No., class, tram company (Yarra or Swanston), type of work, summary, date into workshop and the number of days that the tram had been in the workshop.Demonstrates a reporting mechanism for work being undertaken at Preston Workshops.Single, single sided, A4 sheet copied.Has notes in ink - see image.tramways, ptc, preston workshops, tramcar maintenance

Typed report on the use of precision casting methods at Preston Workshops foundry to reduce the amount of machining post-casting. Looks at the methods of precision casting, the type of equipment needed for this, and those companies in Melbourne using shell moulding, Includes an extensive list of items and the number of units used each year that this method could be used for. Report by J Scholtz dated 12-7-1963.Yields information about the examination of costs and methods of using shell moulding processes at Preston Workshops.Document or report 7 foolscap sheets - carbon copytramways, technical information, preston workshops, costs, foundry, castings, plate shop