Showing 37 items
matching metal trunk
-
Geelong RSL Sub Branch
Metal Trunk
... Metal Trunk...WW2, 418087 F/O L C Dowling, RAAF, Metal Trunk...This is a metal trunk that was issued to 418087 F/O L C...An oblong metal trunk, black....-and-the-bellarine-peninsula Metal Trunk An oblong metal trunk, black. 418087 ...This is a metal trunk that was issued to 418087 F/O L C Dowling RAAF No1, F/O Dowling served with the RAAF during WW2.This is an original issue trunk that belonged to 418087 F/O DowlingAn oblong metal trunk, black.418087 F/O L C Dowling, RAAF No1ww2, 418087 f/o l c dowling, raaf, metal trunk -
National Vietnam Veterans Museum (NVVM)
Equipment - Equipment, Army, Metal Trunk
... Metal Trunk...Metal Trunk...1 large metal khaki coloured trunk with double metal... Newhaven gippsland Metal Trunk Victoria Barracks (Melbourne Vic ...1 large metal khaki coloured trunk with double metal compartment fitted inside marked on top 41335 WO2 Harris C/- MFO HQ Comd Pucka Victoria Barracks Melbourne Australia via Laverton With metal catches & black leather handleAs Abovemetal trunk, victoria barracks (melbourne, vic) -
Bendigo Historical Society Inc.
Container - METAL TRAVELLING TRUNK
... METAL TRAVELLING TRUNK...Metal trunk... PERSONAL EFFECTS Travel goods Metal trunk Stamped on top of lid ...Steel lidded travelling trunk. Lid 6cm deep. Two metal inserts (14 cm x 42 cm) inside the lid. Inside the lid is painted blue and cream. Metal handles on steel plates at either end (12 cm x 6 cm). Two luggage stickers - one on either end of thetrunk. 1. Victorian Railways. Luggage. EXCESS. Melbourne to Sandhurst. 2. Victorian Railways Luggage Ticket. Melbourne to Sandhurst. Owned by Rev. M Clarke.Stamped on top of lid 'No 1' ' REV. M. CLARKE'personal effects, travel goods, metal trunk -
Bendigo Historical Society Inc.
Container - COHN BROTHERS COLLECTION: VICTORIA BREWERY METAL TRUNK
... COHN BROTHERS COLLECTION: VICTORIA BREWERY METAL TRUNK...Metal Trunk. Approx 50cm x 40cm x 40cm. Top has the Name... BENDIGO Business Cohn Brothers Brewery Metal Trunk. Approx 50cm x ...Metal Trunk. Approx 50cm x 40cm x 40cm. Top has the Name 'Cohn Bros Victoria Brewery' painted on in white paint. The trunk contains a range of administrative documents and minute book. Temp Rec# C1.18 These items have now been processed and catalogued separately By Ian Feneslau (ND April 2015)bendigo, business, cohn brothers brewery -
National Vietnam Veterans Museum (NVVM)
Equipment - Equipment, Army, Trunk
... Trunk, Metal... Newhaven gippsland Trunk Metal Chap. G.A. Cudmore, School ...Trunk, MetalChap. G.A. Cudmore, School Of Military. Manly N.S.W.trunk, metal -
National Vietnam Veterans Museum (NVVM)
Equipment - Equipment, Army, Trunk, Metal
... Trunk, Metal... Trunk, Metal Equipment Equipment, Army ...Olive Green colour. Used for storagetruck, metal -
Bendigo Military Museum
Container - PERSONAL TRUNK, 1944
... Metal trunk issued to F.G. Davey for his personal effects...Rectangular metal hinged trunk painted black. A hinged...PERSONAL TRUNK Container Rectangular metal hinged trunk ...Metal trunk issued to F.G. Davey for his personal effects which were shipped home to Australia after WW2.Part of the Frederick Gardner Davey DFC collection. Refer Cat No 3536PRectangular metal hinged trunk painted black. A hinged metal handle in on each end and at the back. Each handle is secured with metal rivets. The lid is secured closed with two 'Closebind' catches A brass locking mechanism is located on the front of the body and is accessed through a keyhole. The interior is painted grey with a brown leather seal around the edges of the lid. Various markings in white paint appear on the lid, each end, the back and the front. Paper stickers are glued onto the lid, back and right hand end. Inside the lid is a manufacturers plaque and year of manufacture printed in black.On lid: 'J13/S, F.G. Davey, VIC, R/124, RAAF Central Repository, West Melbourne, Vic'. On front: 'J13/S'. On Left hand end: 'J13?S 90 VIC, P410533, Davey F.G.'. On right hand end: 'J13/S, Vic' plus paper labels 'Geelong' and 'Mr F.G. Davey, Bendigo'. On back: 'J13/S' and paper label 'Not wanted on voyage'. Inside lid; ' 1944'.f.g. davey, personal equipment, military equipment -
Bendigo Military Museum
Accessory - TRUNK
... Painted brown coloured metal trunk with hinged lid. Ring... goldfields TRUNK Accessory Painted brown coloured metal trunk ...Part of the Kevin John Herdman No. 397661 Collection. See Catalogue No. 5942P for details of his service record.Painted brown coloured metal trunk with hinged lid. Ring handles on each. Hasp and staple type lockable catch. Interior pained in a light blue colour.tin trunk, container, kevin john herdman -
National Vietnam Veterans Museum (NVVM)
Container, Trunk
... A yellow metal trunk with leather carrying handle and metal...Trunk McPhail Collection 3RAR A yellow metal trunk ...A yellow metal trunk with leather carrying handle and metal clasps. Some of the yellow paint has rubbed of revealing a silver colour under it. On the top of the trunk reads 37153 Sgt I.S. McPhail RARtrunk, mcphail collection, 3rar -
Bendigo Historical Society Inc.
Archive - MCCOLL, RANKIN AND STANISTREET COLLECTION: SOUTH NELL GWYNNE MINE BOX, 1930's
... Metal trunk painted dark blue. Formerly box 478. Now... gold mining metal box Some paint scuffs Metal trunk painted ...Metal trunk painted dark blue. Formerly box 478. Now South Nell Gwynne Box 8. Tag attached to front 'box 478'. Paper pasted on the front with Sth. Nell Gwynne printed on it. Box contains documents relating to the South Nell Gwynne and are individually catalogued within.Some paint scuffsmining, parish map, mccoll, rankin & stanistreet, south nell gwynne, gold mining, metal box -
Mont De Lancey
Container - Trunk
... A small metal carriage trunk with a brass latch and metal...-and-dandenong-ranges Trunk Container A small metal carriage trunk ...A small metal carriage trunk with a brass latch and metal handles on the sides. The remains of red or brown paint on exterior is noted. The top and sides are ridged and it has three pairs of metal studs on the lid which is hinged."Patent"trunks, chests -
Bendigo Military Museum
Container - ARMY TRUNK, C.1960’s
... Trunk all metal rectangular shape green colour, hinged lid... goldfields ARMY TRUNK Container Trunk all metal rectangular shape ...Part of kit issue and equipment. Wayne Forbes collection, refer Cat No 754 for service details. Items in the trunk are part of a display.Trunk all metal rectangular shape green colour, hinged lid lockable, lid has small chain each side for lid to fold back.trunks, containers, equipment -
Phillip Island and District Historical Society Inc.
Trunk, 1890 approximate
150 Year Trunk. Bought from Estate Mrs. Ollie Justice 1992. Over 100 years old.Large bound trunk with domed top. Painted blue. Leather handles each end. Binding and top braces with metal studs and edge flanges.local history, personal effects, travel goods, wooden trunk, mrs ollie justice -
Flagstaff Hill Maritime Museum and Village
Domestic object - Wooden Bread Board, Not known
In the high tech, fast paced society that we live in, it’s easy to take some things for granted. Case in point: the wood cutting board on which you’ll probably be preparing the evening’s dinner. Have you ever taken the time to think about the history of the cutting board? Where did it come from, and what did ancient civilizations use to cut their meats, fruits and vegetables? Wood throughout the ages Since the dawn of time, wood has been one of the most available materials used by mankind to build tools and lodgings, so it’s not really surprising to know that wood has been used in the preparation of food since the prehistoric ages. Of course, back then, cavemen probably used an unpolished slab of tree trunk to cut the kill of the day on and they probably didn’t think twice about saving it once the meal was over. Chances are they probably threw it in the fire with the rest of the wood needed to kindle it. Advances in technology Throughout the centuries, mankind evolved and started creating machines from steam, electricity and metal. When the circular saw was invented, nicer, cleaner slabs of wood were cut and used as cutting boards. Since soft wood was the most available type of wood at the time, it was the material of choice for to be used for cutting boards. Boards were made smaller since the slab of wood could now be cut to any desired size. Since they were made smaller, they were also used to eat off of and some people referred to them as trenchers. Trenchers were originally pieces of stale hard bread that were used as substitute plates. Wood trenchers quickly became the replacements of the eatable dinnerware. The butcher block: the cutting board’s larger cousin In the industrial ages, many industries rapidly developed, and the butchery industry followed this trend as well. Before the invention of the cutting board, butchers used tree rounds to carve their meat on. The rounds were often too soft and they rapidly became unsanitary. Hard maple wood butcher blocks were the preferred choice of the industry. They were made to be extremely thick and durable, so durable in fact, that a butcher could use the same block for almost his entire career. Cutting boards around the world As cutting boards began to be more and more used in kitchens around North America, the rest of the world crafted such boards from different materials. The East used thick bamboo as their material of choice. Despite its frail appearance, bamboo is quite strong and made durable cutting boards and butcher blocks. Europe used maple in the crafting of their cutting boards while Persia used flat pieces of polished wood in their kitchens. The world then saw cutting boards that were being made from other materials like plastic and they came in all shapes and sizes, but they always served the same purpose, to provide a household with a safe, clean surface on which to prepare meals for their friends and family members. https://www.woodcuttingboards.com/news/quick-history-of-the-cutting-board-47.aspxThe use of the wooden chopping board over time. Wooden Rectangular Bread board . Worn (concave in centre). Raw wood.None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, chopping board, cooking -
Bendigo Military Museum
Container - TRUNK, OFFICERS WW1, C.WW1
Box relates to Capt Henry SOUTHBY, 39th Batt. KIA 12.10.1917. Refer Cat No 1906 for his full service history also 1905P, 1903.2.Wooden trunk with hinged top lid, both box & lid metal lined. Carry handles each end & two strap hooks front & back. Key lock in front. Lid has a lock down clip on each side. Lid has metal strip screwed on front & sides. Painted in white on each end of box: “Lt H SOUTHBY 39TH BATT”.personal effects - travel goods, military equipment - containers, trunk, officers -
Bendigo Military Museum
Container - WRITING TRUNK WW1, C.WW1
.1) Black Painted Metal Box with hinged Lid Leather Straps .2) Black Painted Metal Tray .3) Pair of Ink Bottles with Metal screw lids .4) Pair of Ink Bottles with Metal screw lids .5) A pair of Keys for Lock personal effects, containers, travelgoods, writing trunk -
Warrnambool and District Historical Society Inc.
Container - Metal Tin for holding documents, late 19th century
This tin or trunk came from the old Kepler Street, Warrnambol Tait legal offices. The tin originally held legal documents connected to John Hyland (1830-1908). Irish-born John Hyland came to the Warrnambool district in 1850 working as a mounted trooper and a rate collector. He then farmed in the Mortlake district for some years before returning to Warrnambool and setting up as an auctioneer and stock and station agent. He was a Warrnambool Councillor (1880s and 90s) and Mayor (1891-2). His trunk of legal documents was first held by the lawyer, Henry Parrington, operating in Warrnambool from 1888 to 1917 (1888-1900 Higgins and Parrington, 1900 Parrington and Tait, 1901-1917 Parrington). Following Hyland's death in 1908 Henry Parrington has used the tin to house his probate documents and when John Sym Tait purchased the Parrington practice in 1917 he has obviously taken over the Hyland trunk. This tin is of some considerable interest as a memento of past Warrnambool identities - John Hyland and Henry ParringtonThis is a metal tin, rectangular in shape. It has a ridged top, two metal handles and a key mechanism.John Hyland Esq. Parrington Probates & Deeds (keep)henry parrington warrnambool lawyer, john hyland warrnambool, john sym tait warrnambool lawyer -
8th/13th Victorian Mounted Rifles Regimental Collection
suitcase
This case was used by Captain Charles Arblaster, a graduate of the Royal Military College Duntroon, who served with the 8th Light Horse Regiment at Gallipoli where he was wounded and evacuated to the United Kingdom for treatment. He returned to Egypt and transferred to the 53rd Infantry Battalion and proceeded to the Western Front where he was wounded and taken prisoner of war at Fromelles on 20 July 1916 and died of wounds four days later. He was aged 21. His personal effects were returned to his family in this case. His diary was transcribed by Doug Hunter in 1997 and the original returned to the donor.A rare example of an officer's trunk used in WWI. It is well provenanced and of particular significance to his family, it being the case in which his personal effects were returned following his death. It is in good condition considering its age and travel history.Suitcase of pasteboard with jute fabric facing, wood and metal external protection strips, leather corner protectors, leather handle on each end, two metal locks and leather security strap. Case has internal lift-out tray and ribbon letter rack on inside of lid. Lined throughout with fabric. Case was used as an officer's trunk by Captain Charles Arblaster 8th Light Horse Regiment.Stencilled on lid "C Arblaster"arblaster, 8th light horse regiment, 53rd infantry battalion, suitcase, diary -
National Wool Museum
Trunk
Trunk belonged to Godfrey Hirst and was used in his travels between Australian and England. Godfrey Hirst's first trip to Australia was in 1885 and his last trip was in 1916. In this time Hirst was known to travel between Australia and England regularly on the lookout for the latest updates from England that he could bring to his factory in Geelong. The Trunk is likely a Saratoga style due to its many compartments including one compartment that features a metal half bowl in order to keep the shape of a hat. The trunk was donated by Susan Wiffen (née Betts), the great granddaughter of Godfrey Hirst. Godfrey Hirst set up a successful woollen textile factory in Geelong in 1888. The factory stayed in operation until 1966. The company still bearing his name has since been purchased by various investment companies but continues to be the largest carpet manufacturer in Australia. Predominately black trunk with two wooden bands around the sides of the trunk and five across the top (lid). The lid is slightly curved and contains white printed lettering GODFREY HIRST. The trunk also contains small wheel underneath locked for pushing the trunk sideways only. The trunk contains two leather handles on either side. Internally, the trunk contains three levels of storage with baskets stackable on top of one another. The baskets are finished in a white and brown striped fabric which has red taped edging for additional strength. The top layer of baskets also has brown leather latches in order to keep the basket lids shut. The layered levels of storage are synonymous of Saratoga style trunk.Printed. Letters: Godfrey Hirstgodfrey hirst -
Puffing Billy Railway
Double Headed Rail, circa 1872 - 1883
Double Headed Rail from Ravenswood Station Siding which was dismantled circa 1987 the two rails were stored for a time at Maldon before being donated to Puffing Billy Museum Bearing makers marks of Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield, North East Derbyshire, England from 1872 - 1883 Double-headed rail In late 1830s Britain, railway lines had a vast range of different patterns. One of the earliest lines to use double-headed rail was the London and Birmingham Railway, which had offered a prize for the best design. This rail was supported by chairs and the head and foot of the rail had the same profile. The supposed advantage was that, when the head became worn, the rail could be turned over and re-used. In practice, this form of recycling was not very successful as the chair caused dents in the lower surface, and double-headed rail evolved into bullhead rail in which the head was more substantial than the foot. Info from Wikipedia - Rail Profile https://en.wikipedia.org/wiki/Rail_profile The first records of double headed rail being used In Victoria by Victorian Railways was in 1859, the rails, chairs, oak and trenails were imported from UK. After the 1870’s the Victorian Railways went over to using flat bottom rails, but they still needed replacement double headed rail for lines already laid and this continued up to at least 1883 Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield England from 1872 - 1883 Mount Alexander & Murray River Railway The Melbourne, Mount Alexander & Murray River Railway Company received parliamentary assent in February 1853 to build Victoria's first inland railway from Melbourne to Williamstown, and Melbourne to Bendigo and Echuca. Construction commenced in January 1854 with work on a pier at Williamstown but lack of funds slowed progress, eventually prompting the company to sell out to the government. The 100-mile (162 km) section to Bendigo opened in October 1862. Its cost of £35,000 per mile made it the most expensive railway ever built in Australia. In 1864, the line was extended to Echuca, tapping into the booming Murray-Darling paddlesteamer trade. info from Museums Victoria - Victorian Railways https://museumsvictoria.com.au/railways/theme.aspx?lvl=3&IRN=450&gall=456 1863 Ravenswood Station open on the 1st Feb 1863 Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Ravenswood Siding When the Victorian Railways were established in 1856 they adopted one of the popular British permanent way standards - heavy 80lb (36.3kg) double-headed rail held up right in cast iron chairs attached to transverse timber sleepers by wooden pegs called trenails. The Ravenswood Railway siding was constructed in 1862 with 12 feet wrought iron double-head rail held in cast iron chairs with Ransom and May patent compressed keys. Trenails held the chairs to the sleepers and the joints were secured in joint chairs. Joints were subsequently joined using fish plates. It formed part of the Melbourne to Echuca rail line, initially known as the Melbourne, Mt Alexander and Murray River Railway. George Christian Derbyshire, the first Engineer-in-Chair of the Victorian Railways was responsible for the design and construction of the works. No new lines were built in Victoria using double-headed rail after 1870. The siding was disconnected from the main line in 1988. The Ravenswood Railway Siding demonstrates the original 1856 philosophy of the Victorian Railways to adopt British permanent way technology. The siding demonstrates significant aspects in the development of permanent way technology in England and Victoria over the period from the 1830's to the 1880's. The chairs in the Ravenswood siding are physical evidence of early railway technology rendered obsolete 120 years ago, namely joint chairs at rail joints and trenails to secure the chairs to the sleepers. The double-headed rail demonstrates an important stage in the evolution of British rail technology in the 1830s. The old fish plates, square headed bolts and square nuts demonstrate the success of fishing the rail joins. The Ravenswood siding demonstrates the earliest form of rail joint technology developed in England, and existing in Australia, the joint chair. In part of the siding the sequence of joint and intermediate chairs is consistent with the 1856 specifications, that sequence is rare with the joints secured in joint chairs. The survival of chairs in this sequence is rare and almost certainly demonstrates that they remained in continuous use at the same location from 1862 to 1988. This remnant of the Ravenswood siding has survived 126 years. The siding has proved to be the most significant of extant remnant double-headed sidings in Victoria, containing a rare combination of early permanent way technologies. Construction dates 1862, Info from Ravenswood Railway Siding Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/4693/download-report The remaining section of this siding is significant at the State and National levels in that it demonstrates the use of chaired rail by the Victorian Railways Department for the Trunk Lines and, more particularly, the following stages in the evolution of this long obsolete method of permanent way construction: a) The use of joint chairs and intermediate chairs at regular intervals inferring that the original wrought iron rail lengths were 12 feet, as is known through documentary sources to have been the case. The survival of chairs in this sequence is unique and almost certainly demonstrates that they have remained in continuous use at the same location and in the same sequence from 1862 to 1988 . b) The use of joint chairs and intermediate chairs designed for use with trenails. c) The use of later intermediate chairs designed for use with steel pins and the use of fished joints with steel double head chaired rail, representing a second method of constructing the permanent way using chaired rail technology. info from Ravenswood Siding - Melbourne/Echuca Railway Line - Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/70103/download-report Addition to Citation for Melbourne to EchucaRailway Line 1/10/1990 Double Head Rail The surviving lengths of double head rail with chairs on this railway compare with one surviving similar remnant on the Geelong to Ballarat railway and are representative of permanent way construction techniques applied exclusively to the two trunk railways of the 1860's. In this respect they are rare survivors and may be unique at the national level and of technical importance at the international level to the extent that they enhance contemporary understanding of early railway building technology. Surviving lengths of chaired double head rail survive at Kyneton, Ravenswood and Bendigo on this railway and include a number of different types of cast iron intermediate and joint chairs with hardwood keys and metal pins. The Ravenswood siding is of special significance for the diversity of chair types and for the sequence of chairs recalling rail lengths known to be associated with construction of the line in 1862. Construction of the Railway Tenders closed on 24 March 1858 with no less than 133 tenders being received. A contract was let to Cornish and Bruce for £3,356,937 to commence work on 1 June 1858 and complete the line by 31 July 1861. Cornish and Bruce made quick early progress with the Melbourne to Sunbury section being officially opened on 13 January 1859. The line was officially opened to Bendigo (Sandhurst) on 20 October 1862 by the Governor of Victoria, Sir Henry Barkly. A great banquet was held for 800 guests and this was followed by a grand ball. The extension of the line to Echuca was a relatively simple matter as that part of the line was across plain country without any significant engineering challenges. Tenders were called for the work in 1863 and the work was completed in 1864 by contractors Collier and Barry Apart from the line contractors, other firms directly involved were J Shire law and Co (sleepers), R Fulton, Langlands Brothers and Co, William Crossley (water supply), B Moreland, Langlands Brothers and Co (platelayers lorries), E Chambers (iron pins, traversers), Miller and McQuinstan (luggage vans and steam engines) and various contractors for building works. Info from Engineers Australia Engineering Heritage Victoria Nomination for Recognition under the Engineering Heritage Australia Heritage Recognition Program for the Goldfields Railways - Melbourne , Bendigo & Echuca Railway Page 25 - .2.9.2 Statement from National Trust of Australia (Victoria) Listing number B5323 for Mt Alexander/Murray Valley Rail Line: Page 69 - Theme 3 https://www.engineersaustralia.org.au/portal/system/files/engineering-heritage-australia/nomination-title/Melbourne_%20Bendigo_Echuca%20Railway%20Nomination.pdf The Melbourne, Mount Alexander and Murray River Railway Company was a railway company in Victoria, Australia. It was established on 8 February 1853 to build a railway from Melbourne to Echuca on the Victorian-NSW border and a branch railway to Williamstown. The company struggled to make any progress and on 23 May 1856, the colonial Government took over the Company and it became part of the newly established Department of Railways, part of the Board of Land and Works. The Department of Railways became Victorian Railways in 1859. Construction of the Bendigo line commenced in 1858, but this private consortium also met with financial difficulties when it was unable to raise sufficient funds, and was bought out by the Victorian colonial government. The design work was then taken over by Captain Andrew Clarke, R. E., Surveyor-General of Victoria, with bridge designs completed by Bryson and O'Hara The contract for the first stage of the line from Footscray to Sandhurst (now Bendigo), was let to Cornish and Bruce for £3,356,937.2s.2d ($6.714 million) with work commencing on 1 June 1858. Completion of the permanent way was to be by 31 July 1861 https://en.wikipedia.org/wiki/Melbourne,_Mount_Alexander_and_Murray_River_Railway_Company Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Victorian Railways : report of the Board of Land and Works November 1862 GP V 1862/63 no. 21 (2.8 MB) https://www.parliament.vic.gov.au/papers/govpub/VPARL1862-63No21.pdfHistoric - Victorian Railways - Double Headed rail Ravenswood Railway Station and Siding Victorian Heritage Database Reports Victorian Heritage Register VHR H1100 Victorian Heritage Register VHR H1786 National Trust VHR H1100 Mount Alexander and Murray River Rail way Line National Trust2 rail lengths of Double Headed Rail made of Iron makers marks : Wilson & Cammell - Dronfield - Steel and 20 joint chairs with metal rail pins Makers mark Wilson & Cammell - Dronfield - Steel (possible date 187? very hard to read ) puffing billy, double headed rail, wilson & cammell - dronfield - steel works, ravenswood station siding, melbourne to echuca rail line, initially known as the melbourne, mt alexander and murray river railway. -
Flagstaff Hill Maritime Museum and Village
Trunk
Trunk wooden with 4 wood supports on top with decorative metal corner brackets. Lieutenant R H Haynes marked on top outside. Has blue & white striped material inside. 2 metal handles each end & 1 at front. 3 locks at front & E F Melbourne on sideflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and Village
Functional object - Steamer Trunk, 1880-1925
Steamer trunks (named after their location of storage in the cabin of a steamship, or "steamer") which are sometimes referred to as flat-tops, first appeared in the late 1870s, although the greater bulk of them date from the 1880–1920 period. They are distinguished by either their flat or slightly curved tops and were usually covered in canvas, leather or patterned paper and about (36 cm) tall to accommodate steamship luggage regulations. Steamer trunks were originally called a cabin trunk. An orthodox name for this type of trunk would be a "packer" trunk, but since it has been widely called a steamer for so long, it is now a hallmark of the style. A trunk, also known as a travel trunk, is a large cuboid container designed to hold clothes and other personal belongings. They are most commonly used for extended periods away from home. Trunks are differentiated from chests by their more rugged construction due to their intended use as luggage, instead of storage. Among the many styles of trunks, there are Jenny Lind, Saratoga, monitor, steamer or Cabin, barrel-staves, octagon or bevel-top, wardrobe, dome-top, barrel-top, wall trunks, and even full dresser trunks. These differing styles often only lasted for a decade or two and along with the hardware can be extremely helpful in dating an unmarked trunk. Although trunks have been around for thousands of years in China and elsewhere, the most common styles seen and referred to today date from the late 18th century to the early 20th century when they were supplanted in the market by the cost-effective and lighter suitcase. There were hundreds of trunk manufacturers in the United States and a few of the larger and well-known companies were Rhino Trunk & Case, C.A. Taylor, Haskell Brothers, Martin Maier, Romadka Bros, Goldsmith & Son, Crouch & Fitzgerald, M. M. Secor, Winship, Hartmann, Belber, Oshkosh, Seward, and Leatheroid. One of the largest American manufacturers of trunks at one point the Seward Trunk Co. of Petersburg, Virginia still makes them for school and camp, and another company Shwayder Trunk Company of Denver, Colorado would eventually become Samsonite. Another is the English luxury goods manufacturer H.J. Cave trading since 1839. Their Osilite trunk was used by such famous customers as T.E. Lawrence and Ruth Vincent Some of the better known French trunk makers were Louis Vuitton, Goyard, Moynat, and Au Départ. Only a few remain with the most prominent US company being Rhino Trunk and Case, Inc who probably manufacture more trunks than any company in the world.A snapshot into our social history regards how travel was undertaken over a hundred years ago and how people travelled so differently than today as they often packed for extended travel on ships. Travel then was so different with people having to pack a very large wardrobe of clothes to last for some times months overseas.Trunk rectangular with wood ribs and metal strips for reinforcing. Covered with canvas and has 3 locking devices. Also has leather handles at ends.On lock inscription Eagle lock Co.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and Village
Functional object - Steamer luggage Trunk, First quarter of the 20th century
Item used around the first quarter of the 20th century The suitcase didn't catch on until the end of the 19th century, it was quite literally as a case for suits. A typical suitcase came equipped with an inner sleeve for storing shirts, and sometimes a little hat box on the side. But even in the early 20th century, the "dress-suit case" was only one of countless styles of container travellers could buy, from steamer trunks to club bags. By the late 19th century a significant point was reached in the history of transportation, it was the beginning of mass tourism, rather than travel for travels sake made use of by the wealthy in society. Travel wasn't just for the wealthy any more but everyone. Suitcases began as an afterthought in the luggage and leather goods business, but they soon became the very symbol of travel. An 1897 wholesale price list included the words "suitcase" only twice in a 20-page list of luggage types. In America a 1907 T. Eaton & Co. Catalogue, trunks took up a full page while suitcases share a page with club bags and valises. In a 1911 a United Company catalogue, now displayed around 40 per cent of the advertisements were for suitcases. Early suitcases were lighter and more portable than trunks, but they were still bulky by today's standards. Leather, canvas, wicker or thick rubbery cloth was stretched over a rigid wood or steel frame. Corners were rounded out using brass or leather caps and some had wooden rails running around the case. Until steamship travel declined during the mid-20th century, many of these types of the case were advertised as waterproof with some lightweight models marketed specifically to women. The item gives us a snap-shot as to how people undertook travelling during a time when undertaking a journey for pleasure at the end of the 19th and early 20th century was mainly only for the wealthy. This time saw the beginnings of change from the wealthy in society being able to travel, to the onset of mass tourism. Along with this change in societal norms saw many innervation's to the design of luggage as it became a fashionable item.Suitcase/trunk leather reinforced at corners with wooden slats to strengthen the lid. Leather straps to close lid with metal lock in the middle of the lid. Closing strap missing.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and Village
Trunk
Trunk wooden Baltic pine with grey & white stripe interior. Has curved top with 3 wood supports on front & 3 on lid. 2 metal handles each end. Is blackflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and Village
Functional object - Diving Suit, boots and weight, 1900
This diving suit with helmet, boots and weight is part of the E.G.Ward collection, along with the diving compressor and a photograph of a diver in this equipment. Siebe Gorman & Company Ltd was a British company that developed diving equipment and breathing equipment and worked on commercial diving and marine salvage projects. The company advertised itself as 'Submarine Engineers'. It was founded by Augustus Siebe, a German-born British engineer chiefly known for his contributions to diving equipment. Siebe Gorman traded as an engineering firm for over 180 years from 1819 to 1999. The early success of the business was due to its founder, the Prussian immigrant Christian 'Augustus' Siebe (1788-1872). For business reasons, he applied for and was granted British citizenship in 1856. He was a gifted engineer who was able to translate theoretical problems into practical, working products. During the industrial Victorian period, the business traded as 'A. Siebe' at 145 High Street Holborn London, but in 1828 new premises were acquired at 5 Denmark Street, Soho. The family firm produced a wide range of manufactured goods including paper-making machinery, measuring machinery, water pumps, refrigeration equipment and diving apparatus. Augustus Siebe specialised in submarine engineering early on and the company gained a reputation for the manufacture of safe, reliable diving apparatus. Augustus Siebe is best remembered for the development and manufacture of the ‘closed’ Diving Dress based on the ideas of Charles and John Deane, George Edwards and Charles Pasley. Apart from some small modifications to valves and diver communications, the basic 12-bolt ‘closed’ diving dress remained relatively unchanged after the 1870s. Later company successes were also based on innovation, with new products that could be successfully developed and manufactured to high standards. This was largely attributed to the inventive nature, foresight, engineering and entrepreneurial skills of Robert Henry Davis (1870-1965). In 1882, RH Davis joined the company of 'Siebe & Gorman' as a young 11-year-old office boy and he was to remain with the company until he died in 1965. Augustus Siebe retired in 1869 and handed over the company to a new partnership of Henry H. Siebe (1830-1885) and William A. O'Gorman (1834-1904). The new firm traded as 'Siebe & Gorman' (1870-1879) from premises in and around Mason Street, Westminster Bridge Road, Lambeth, London. The two partners soon recognised the potential of R.H. Davis and in 1894, aged 24, he became General Manager of Siebe & Gorman. Davis increasingly ran the company until the surviving partner (W.A. Gorman) died in 1904. The firm was disposed of to the Vickers (armaments) family and a new company 'Siebe Gorman & Co. Ltd.' (1905-1998) was formed. Under the chairmanship of Albert Vickers, R.H. Davis was kept on as Managing Director, and the company forged ahead. However, after WW1, the Great Depression caused manufacturing output and share prices to slump. In 1924 Robert Davis made a deal with the Vickers Board and acquired control of the company through majority shares. Under his leadership, the Siebe Gorman Company flourished and within time, four of his sons also joined the firm. The company gained a worldwide reputation for the manufacture of diving apparatus, decompression and observation chambers, and safety breathing apparatus of all types for use on the land, in the air and under the sea (including mine rescue, tunnelling, aircraft, diving, submarine escape and in other hazardous environments). Close research and development links with the MOD (especially the Admiralty), also provided a lucrative outlet for the company products. In 1932, Robert Davis was knighted by King George V, principally for his invention of the ‘Davis Submerged Escape Apparatus’ (D.S.E.A.). Siebe Gorman essentially remained a family firm from the beginning (under A.Siebe) until it became a public company for the first time in 1952. However, following WW2, British manufacturing stagnated through stifled investment and post-war austerity, and there was little innovation. Siebe Gorman fortunes began to decline as an ageing Sir Robert Davis failed to invest, or change the company business and management practices. In 1959, Siebe Gorman was acquired by the “Fairy Group” and the ailing Sir Robert was made Life President. Consequently, nothing changed and the slow decline continued until Sir Robert's death in March 1965. Around 1960, Siebe Gorman acquired the diving apparatus manufacturer C E Heinke, and for a brief period, it manufactured some diving equipment under the combined name of Siebe Heinke. Around 1964, Mr E. 'Barry' Stephens was appointed as the new Managing Director to modernise Siebe Gorman. Changes were made, including a move to a new factory in Wales in 1975. The new company concentrated on fire-fighting breathing apparatus and escape equipment, and the move coincided with the loss of many of the older, traditional craft skills. Between 1985 and 1998, Siebe expanded through acquisitions, and several other companies were acquired. The Siebe Gorman (diving apparatus) company has therefore traded as A. Siebe (1819-1870); Siebe & Gorman (1870-1879); Siebe Gorman & Co (1880-1904); Siebe Gorman & Co. Ltd (1905-1998).The items are very significant as a snapshot into marine history and the development of diving equipment generally especially that used for salvage operations before and during WW2. The company that made the equipment was a leading inventor,developer and innovator of marine equipment with its early helmets and other items eagerly sought after today for collections around the world. The items in the Flagstaff Hill collection give us an insight as to how divers operated and the dangers they faced doing a very necessary and dangerous job.Diving suit including helmet, boots and a weight. Diving suit is made of canvas with knitted cuffs. The helmet is metal. The boots have a thick sole and thick leather upper that is held on with leather straps and buckles. The toe of the boot is heavy metal. The weight is worn next to the trunk of the diver and it has an inscription to mark the front. It is worn with straps and buckles holding it in place. Royal Navy Admiralty Pattern 6 bolt No 3 light Siebe Gorman light diving helmet circa 1960 used by the Royal Navy before and after World War 2"Siebe Gorman & Co Ltd Marine Engineers London. Patent" with "E G Ward" on front and back plate. On weight "FRONT"flagstaff hill, warrnambool, diving suit, siebe gorman and co ltd., siebe gorman and co ltd marine engineers london, marine engineers, diving helmet, diving boots, diving weight, marine diving, maritimemuseum, maritime village, maritime history, marine technology, life saving, deep sea diving -
Stratford and District Historical Society
Chest
Thought to have been made and used by one of the two Struss brothers who were both carpenters in Scotland before coming to Victoria in 1848 and 1854. They dealt in hardware, living and selling in Walhalla, Woods Point and Matlock. It finally became the property of Elsa Struss of South Yarra, the sister-in-law of the donor. Many tradesmen had chests such as this to carry and store tools.Large wooden box/trunk, painted Mission Brown. Three tin braces support each corner joint. Four hinges, two at the back and two inoperational at the front. Lid corners and edges braced with tin strips and shaped corners. Loop and hasp at front. Metal handles on the side. Pink paint on base.trades -
Coal Creek Community Park & Museum
Tin, sweets
The picture on lid of tin is 'Geoff' (1931) by W. B. McINNES. Medium : oil on canvas Measurements: 116.8 x 86.2 cm Accession Number : 4574-3 National Gallery of Victoria, Melbourne. Felton Bequest, 1931. Rectangular metal tin with fitted lid, depicting a boy with fishing rod seated on trunk and surrounded by fishing gear on the lid, gold, silver and black pattern around edge.Geoff by W B McInnes after original in National Gallery Melbourne, Victoria. -
Dutch Australian Heritage Centre Victoria
Container - Cabin Trunk (Hutkoffer)
... Black timber trunk clad with metal, metal strap on edge... trunk clad with metal, metal strap on edge of lid, wooden slats ...Multiple labels suggest it was used many times for travel to and from Netherlands and Dutch East Indies.Black timber trunk clad with metal, metal strap on edge of lid, wooden slats on lid,, one missing; metal hinges, locks padlock type. Inside lined with with ticking pattern cotton cloth, remains of black strap. Remains of four stickers on lid.Stencilled name in white O. COERPER, repeated in larger letters painted on. On middle wooden slat Buissink, remains of previous name. Lower salt, Melbourne painted in light blue letters. Stickers: left side of lid, white sticker with red ring and red B inside. On lower left side of lid, remains of sticker with Stoomvaart Maatschappij. Sticker on top right hand corner of lid, Black and white square cargo sticker,Javakade. Niet voor de reis, Not wanted; Passiegiersgoed. Name, port of discharge, Melbourne schip possibly Johan van Oldenbarneveld. Final destination. 49, remainder blurred. Remains of sticker central lower lid. Locks with D.R.P. stamped. Coerper painted on front, Remains of white sticker on left side of front. -
Trafalgar Holden Museum
Functional object - Solid leather travel trunk
... Brown leather overland trunk Leather straps, bright metal... overland trunk Leather straps, bright metal clasps Sticker on front ...Leather clothing trunk used by travelers manufactured by Holden and FrostManufactured by Holden and Frost Ca1900Brown leather overland trunk Leather straps, bright metal clasps Sticker on front marked Cabin , Number and Berthleather, case, travel -
Flagstaff Hill Maritime Museum and Village
Domestic object - Bread Board
In the high tech, fast paced society that we live in, it’s easy to take some things for granted. Case in point: the wood cutting board on which you’ll probably be preparing the evening’s dinner. Have you ever taken the time to think about the history of the cutting board? Where did it come from, and what did ancient civilizations use to cut their meats, fruits and vegetables? Wood throughout the ages Since the dawn of time, wood has been one of the most available materials used by mankind to build tools and lodgings, so it’s not really surprising to know that wood has been used in the preparation of food since the prehistoric ages. Of course, back then, cavemen probably used an unpolished slab of tree trunk to cut the kill of the day on and they probably didn’t think twice about saving it once the meal was over. Chances are they probably threw it in the fire with the rest of the wood needed to kindle it. Advances in technology Throughout the centuries, mankind evolved and started creating machines from steam, electricity and metal. When the circular saw was invented, nicer, cleaner slabs of wood were cut and used as cutting boards. Since soft wood was the most available type of wood at the time, it was the material of choice for to be used for cutting boards. Boards were made smaller since the slab of wood could now be cut to any desired size. Since they were made smaller, they were also used to eat off of and some people referred to them as trenchers. Trenchers were originally pieces of stale hard bread that were used as substitute plates. Wood trenchers quickly became the replacements of the eatable dinnerware. The butcher block: the cutting board’s larger cousin In the industrial ages, many industries rapidly developed, and the butchery industry followed this trend as well. Before the invention of the cutting board, butchers used tree rounds to carve their meat on. The rounds were often too soft and they rapidly became unsanitary. Hard maple wood butcher blocks were the preferred choice of the industry. They were made to be extremely thick and durable, so durable in fact, that a butcher could use the same block for almost his entire career. Cutting boards around the world As cutting boards began to be more and more used in kitchens around North America, the rest of the world crafted such boards from different materials. The East used thick bamboo as their material of choice. Despite its frail appearance, bamboo is quite strong and made durable cutting boards and butcher blocks. Europe used maple in the crafting of their cutting boards while Persia used flat pieces of polished wood in their kitchens. The world then saw cutting boards that were being made from other materials like plastic and they came in all shapes and sizes, but they always served the same purpose, to provide a household with a safe, clean surface on which to prepare meals for their friends and family members. https://www.woodcuttingboards.com/news/quick-history-of-the-cutting-board-47.aspxThe bread board is an example of kitchen equipment used during Victorian times and similar to those used today.Bread board wooden round with carved inner circle and carving an outer rim in old English lettering "Bread"None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, chopping board, cooking, kitchen equipment