Showing 143 items matching "pipe top"
-
Whitehorse Historical Society Inc.Article, City's Highland Pipe Band Wins Top Awards, 1989
... City's Highland Pipe Band Wins Top Awards...City's Highland Pipe Band Wins Top Awards Article Article ...Nunawading Highland Pipe Band have won 5 trophies at the Dominion Championships in Dunedin, New ZealandNunawading Highland Pipe Band have won 5 trophies at the Dominion Championships in Dunedin, New Zealand - President of Band, Rob Cousens, who presented Nunawading Mayor, Cr. Jan Plummer with a Plaque on behalf of the Mayor of Dunedin.Nunawading Highland Pipe Band have won 5 trophies at the Dominion Championships in Dunedin, New Zealand city of nunawading highland pipe band, dominion championships new zealand, cousens, bob, city of nunawading, plummer, jan -
Mission to Seafarers VictoriaInstrument - Reed organ, W Bell & Co, c. 1888
... ...pipe top...The Mission to Seafarers has been in operation ever since and continues to operate to the same purpose today. organ worship bethel pipes reed Bethel union pipe top Jabez carnegie W. Bell & Co port melbourne mission to seafarers seamens' mission mission to seamen guelph ontario canada pmhps polly woodside harmonium reed organ Maker's mark in gold lettering above keyboard: W. ...This organ was gifted by the Bethel Community in 1890 to the then Victorian Seamen's Mission, originally founded by the Bethel Union in 1857. The gift was intended to assist with worship. Despite all appearance, this organ is not a pipe organ but a reed organ that works in a similar manner to an accordion. In May 1890, the sum of seventy pounds was put towards the purchase of the organ. The sum being raised via subscriptions. The organ was inaugurated in September 1890. Jabez Carnegie (1832-1892), importer of piano and organs in Melbourne, had made a trip to Europe and Canada in 1887 and had secured the agency of Bell organs. W. Bell & Co were a Canadian organ and piano manufacturer, considered the premier organ manufacturer of the time. W Bell & Co changed its name to Bell Organ and Piano Co in 1888 meaning this organ had to be manufactured prior to the name change. The organ was first used in the mission main room from 1890 to 1915 when the St Nicholas chapel was built at the back (see item 0548. It was transfered to the new Port Melbourne mission in 1937 (link on postcard from State Library Victoria). In 1972, it was transferred to the Holy Trinity Church in Bay Street after the closure of the Mission In the late 1980s during a National Trust campaign to save the building, the organ was sold by the Anglican Men's Society to the Trust's organ committee, who carried out some restoration work and returned it to the former Missions to Seamen chapel. In 1991 the Office of Major Projects had control of the whole 'Bayside' development site. With the Mission to Seamen Building emptied and proposed for demolition, the Office of Major Projects removed the organ and placed it in storage in various locations - finally, in the Museum of Victoria store in Abbotsford. In 1995-6, enquiries by Jim Hillis resulted in the return of the organ to the control of the Port Melbourne HIstorical & Preservation Society. As the Society had no suitable location for the organ, several churches and schools in Port Melbourne were approached to take the organ with no results. The nearby suburbs were suggested next. Finally the Melbourne Maritime Museum (Polly Woodside) was approached and agreed to place it in their Museum on a long term loan. In 1997 it was on display in no 5 shed South Wharf (23/3/1997). In 2006, the Polly Woodside South Wharf site was to be re-developed, and they could no longer retain the organ. Accordingly, on 4 May 2006, the organ was transferred to the Mission To Seafarers building in Flinders Street Extension as an indefinite loan (refer OL 022) The PMHPS deaccessioned it to finally transfered it in 2018 to MTSV.(See also acquisition details re 21st C finalisation of acquisition) This organ is a tangible reminder of the longevity of the Mission to Seafarers, a link with the original Bethel Union which was instrumental in 1856 calling a public meeting and inviting subscriptions by various non-conformist churches to found a mission to Seamen. Rev Kerr-Johnson delivered the first service in 1857 aboard the Emily. The Mission to Seafarers has been in operation ever since and continues to operate to the same purpose today.Large reed organ that looks like a pipe organ with fifteen elaborately painted pipes bearing a floral motif. The body of the organ is elaborately decorated in carved wood. It has 17 knobs above the keyboard both which can be concealed when the keyboard cover is lowered. There are two foot pedals at the bottom of the organ with "Mouse Proof Pedals" cast into the framing iron. list of stop names: Viola 4Ft Diapason 8Ft Dolce 4Ft Violetta 2Ft Sub Bass 16 Ft Octave Coupler Vox Humana Forte Picciolo 2Ft Hautboy 8Ft Aeoline 8Ft Cremona 16Ft E---bone 16Ft Echo 8Ft Celeste 8Ft Melodia 8Ft Flute 4FtMaker's mark in gold lettering above keyboard: W. Bell & Co Brass plaque on front board: Presented to/The Victorian Seamen's Mission/by/Congregation worshipping in Bethel/& friends./1st September 1890 Behind the stops a wooden plaque: J. CARNEGIE & SONS, SOLE AGENTS FOR VICTORIA MELBOURNE organ, worship, bethel, pipes, reed, bethel union, pipe top, jabez carnegie, w. bell & co, port melbourne, mission to seafarers, seamens' mission, mission to seamen, guelph, ontario, canada, pmhps, polly woodside, harmonium, reed organ -
Bendigo Historical Society Inc.Document - ALBERT RICHARDSON COLLECTION : ENGINEERING DRAWING, 1917
... Richardson. On top ' Pipe Joint' written on bottom A. Richardson, 9/11/1917....Richardson. On top ' Pipe Joint' written on bottom A. Richardson, 9/11/1917. ...Document: black pen engineering drawing by A. Richardson. On top ' Pipe Joint' written on bottom A. Richardson, 9/11/1917.person, alf richardson, engineering drawing, bendigo, alf richardson, engineering, mining, drawing -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)Containers, tin 'Dr Pat' pipe tobacco, 20thC
... A circular tin with screw top contained pipe tobacco 'Dr Pat ' brand...The purchase gave Imperial Tobacco Australia an opening market share of 17.1%.27 Imperial Tobacco Australia ranked third in cigarettes sales in 2009, with a volume share of 16.2%. imperial tobacco australia ltd, tobacco, cigarettes, cigars, moorabbin, bentleigh, cheltenham, dr. pat pipe tobacco, cigarette manufacturers Lid : DELUXE / Dr PAT' / IRISH MIXTURE / PIPE TOBACCO / 50g NET A circular tin with screw top contained pipe tobacco 'Dr Pat ' brand Containers, tin 'Dr Pat' pipe tobacco Imperial Tobacco Australia ...Dr.Pat, a brand of both cigarette and pipe tobacco, are produced and sold by Imperial Tobacco Australia. It is an aromatic blend of Irish and other fine cut tobaccos. Dr.Pat is sold only in New Zealand and Australia. Imperial Tobacco Australia Limited is the smallest and most recently formed of the tobacco companies operating within Australia. Imperial Tobacco Australia was established to coincide with the merger of WD & HO Wills Holdings Limited and Rothmans Holdings Limited as British American Tobacco Australia. At the time of the proposed merger, concerns were raised about the likelihood for reduction in competition in the Australian marketplace, thereby potentially causing a breach of Section 50 of the Trade Practices Act 1974. The Australian Competition and Consumer Commission agreed to permit the merger to proceed, on condition that another tobacco company enter the Australian market. The UK-based Imperial Tobacco Group was invited to enter the Australian market and in September 1999, Imperial Tobacco Australia commenced operations.26, 27 As part of the agreement allowing the formation of British American Tobacco Australia, Imperial Tobacco Australia was sold a portfolio of cigarette, roll-your-own tobacco and cigarette paper trademarks previously owned by Rothmans or WD & HO Wills for the sum of $325 million. The purchase gave Imperial Tobacco Australia an opening market share of 17.1%.27 Imperial Tobacco Australia ranked third in cigarettes sales in 2009, with a volume share of 16.2%. A circular tin with screw top contained pipe tobacco 'Dr Pat ' brandLid : DELUXE / Dr PAT' / IRISH MIXTURE / PIPE TOBACCO / 50g NETimperial tobacco australia ltd, tobacco, cigarettes, cigars, moorabbin, bentleigh, cheltenham, dr. pat pipe tobacco, cigarette manufacturers -
Clunes MuseumFunctional object - BELLOWS
... SMALL LEATHER BELLOWS WITH STEEL PIPE PROTRUDING FROM TOP OF BELLOWS, TIMBER FRAMED WITH UPHOLSTERY TACK TO JOIN LEATHER TO FRAME....Found in the donor's house in Service Street, Clunes, Victoria, Australia bellows fire implements Nil SMALL LEATHER BELLOWS WITH STEEL PIPE PROTRUDING FROM TOP OF BELLOWS, TIMBER FRAMED WITH UPHOLSTERY TACK TO JOIN LEATHER TO FRAME. ...Found in the donor's house in Service Street, Clunes, Victoria, AustraliaSMALL LEATHER BELLOWS WITH STEEL PIPE PROTRUDING FROM TOP OF BELLOWS, TIMBER FRAMED WITH UPHOLSTERY TACK TO JOIN LEATHER TO FRAME.Nilbellows, fire implements -
Halls Gap & Grampians Historical SocietyPhotograph - B/W
... Side view of Man, with hat in his hand, smoking a pipe, seated on top of rocky outcrop. Gumtrees and bush visible in background. c1930s...PEOPLE Paasch Side view of Man, with hat in his hand, smoking a pipe, seated on top of rocky outcrop. Gumtrees and bush visible in background. c1930s Photograph B/W ...Man was Freddie Paash, a Danish immigrant who made his home in Halls Gap. He is seated on what was known as the 'Coronation Chair'. c1930s. This no longer exists as it was struck by lightning.Side view of Man, with hat in his hand, smoking a pipe, seated on top of rocky outcrop. Gumtrees and bush visible in background. c1930speople, paasch -
4th/19th Prince of Wales's Light Horse Regiment Unit History RoomTrench Art, brass vase
... Vase, 50 mm dia x 175 mm long brass pipe, flared at top, soldered on brass 3 tiered circular base...Possible donor to Officers' Mess Trench art Vase, 50 mm dia x 175 mm long brass pipe, flared at top, soldered on brass 3 tiered circular base Trench Art, brass vase ...Paper in brass with name: LT LEE. Possible donor to Officers' MessVase, 50 mm dia x 175 mm long brass pipe, flared at top, soldered on brass 3 tiered circular basetrench art -
Whitehorse Historical Society Inc.Domestic object - Copper
... Round copper insert with galvanised flue pipe. Round wooden top reinforced with two pieces of wood and a wooden handle....Round copper insert with galvanised flue pipe. Round wooden top reinforced with two pieces of wood and a wooden handle. ...Cast iron copper with pull out door for fuel at base. Round copper insert with galvanised flue pipe. Round wooden top reinforced with two pieces of wood and a wooden handle.domestic items, laundering -
Kew Historical Society IncClothing - Buttoned, Beige Striped Silk Bodice, 1870s
... Beige coloured silk top with narrow mauve stripes. The top has a piped mandarin collar. The top has satin trimming. ...The waist was lower in the 1870s than the 1860s, with an elongated and tight bodice and a flat fronted skirt. women's clothing fashion - melbourne - 1870s bodices Beige coloured silk top with narrow mauve stripes. The top has a piped mandarin collar. The top has satin trimming. ...1870s women's fashion placed an emphasis on the back of the skirt, with long trains and fabric draped up into bustles with an abundance of flounces and ruching. The waist was lower in the 1870s than the 1860s, with an elongated and tight bodice and a flat fronted skirt. Beige coloured silk top with narrow mauve stripes. The top has a piped mandarin collar. The top has satin trimming. women's clothing, fashion - melbourne - 1870s, bodices -
Tatura Irrigation & Wartime Camps MuseumBag Filler Rammer
... Used on Crawford's farm (Woodlands) to top up bags of cereal when harvested before sewing the bags up. Ramming the pipe into the bag forces extra grain down into the lower areas....Handmade galvanised iron (tin) pipe with funnel at top with lid used to ram extra grain into filled bags to top up weight....Used on Crawford's farm (Woodlands) to top up bags of cereal when harvested before sewing the bags up. Ramming the pipe into the bag forces extra grain down into the lower areas. bag filler rammer Crawford's farm agricultural equipment Handmade galvanised iron (tin) pipe with funnel at top with lid used to ram extra grain into filled bags to top up weight. ...Used on Crawford's farm (Woodlands) to top up bags of cereal when harvested before sewing the bags up. Ramming the pipe into the bag forces extra grain down into the lower areas.Handmade galvanised iron (tin) pipe with funnel at top with lid used to ram extra grain into filled bags to top up weight.bag filler rammer, crawford's farm, agricultural equipment -
Flagstaff Hill Maritime Museum and VillageFire Pump, 20th century
... Pump has threaded fitting for pipe at top and wire filter at bottom. Made by Stokes, Melbourne. ...Pump has threaded fitting for pipe at top and wire filter at bottom. Made by Stokes, Melbourne. ...This water pump was owned by Dr. W.R. Angus AND was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) According to Berry, her mother Gladys made a lot of their clothes. She was very talented and did some lovely embroidery including lingerie for her trousseau and beautifully handmade baby clothes. Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . Its first station was in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill and purchased a share of the Nelson Street practice and Mira hospital (a 2 bed ward at the Nelson Street Practice) from Dr Les Middleton one of the Middleton Brothers, the current owners of what previously once Dr Tom Ryan’s practice. Dr Tom and his brother had worked as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He had been House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan had gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. When Dr Angus took up practice in the Dr Edward and Dr Tom Ryan’s old premises he obtained their extensive collection of historical medical equipment and materials spanning 1884-1926. A large part of this collection is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. and an ALDI sore is on the land that was once their tennis court). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served with the Australian Department of Defence as a Surgeon Captain during WWII 1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. He had an interest in people and the community They were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Fire pump, part of the W.R. Angus Collection. Red metal water pump. "D" shaped pump handle slides within pump cylinder, stand has 'U" shaped footrest. Pump has threaded fitting for pipe at top and wire filter at bottom. Made by Stokes, Melbourne. Remnants of red paint left on pump. Card label is attached. Moulded into metal "STOKES" and “MELB”. Label attached with string to handle (no text visible).flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, dr ryan, surgical instrument, t.s.s. largs bay, warrnambool base hospital, nhill base hospital, mira hospital, flying doctor, water pump, fire pump, fire extinguisher, safety equipment -
Department of Energy, Environment and Climate ActionInstrument - Armstrong Rapid Log Calculator
... An allowance could also be made for pipe defects. The top roller was for larger diameter logs....An allowance could also be made for pipe defects. The top roller was for larger diameter logs. ...Logs were sold to sawmillers from State forest from 1 July 1974 in cubic metres (true volume). Previously sawlogs had been sold on the basis of Hoppus volume. This simple device with two rotating wheels enabled staff in FCV offices to rapidly calculate log volumes from measurements taken in the bush of log girth and length and recorded on paper log dockets. From the early 1980s automated systems became available with the advent of cheap electronic office calculators and simple computers. An early manual device that was superseded by electronic calculatorsOffice Device Twin rollers used to quickly and simply calculate true log volumes using measurements of girth and length. An allowance could also be made for pipe defects. The top roller was for larger diameter logs.forest measurement, forests commission victoria (fcv) -
Department of Energy, Environment and Climate ActionArmstrong Rapid Log Calculator
... An allowance could also be made for pipe defects. The top roller was for larger diameter logs....An allowance could also be made for pipe defects. The top roller was for larger diameter logs. ...Logs were sold to sawmillers from State forest from 1 July 1974 in cubic metres (true volume). Previously sawlogs had been sold on the basis of Hoppus volume. This simple device with two rotating wheels enabled staff in FCV offices to rapidly calculate log volumes from measurements taken in the bush of log girth and length and recorded on paper log dockets. From the early 1980s automated systems became available with the advent of cheap electronic office calculators and simple computers.An early manual device that was superseded by electronic calculatorsOffice Device Twin rollers used to quickly and simply calculate true log volumes using measurements of girth and length. An allowance could also be made for pipe defects. The top roller was for larger diameter logs.Imperial measurement of logs (pre 1976)forests commission victoria (fcv), forest harvesting, forest measurement -
Glenelg Shire Council Cultural CollectionPhotograph - Photograph - Portland Harbour, 30/08/1989
... Close up view of part of machinery in A105 - A109., showing hexagonal shaped piece of yellow painted metal, with a pipe coming out top and bottom, 4 hexagonal nuts, a square panel with a 'T' on it...Close up view of part of machinery in A105 - A109., showing hexagonal shaped piece of yellow painted metal, with a pipe coming out top and bottom, 4 hexagonal nuts, a square panel with a 'T' on it Photograph Photograph - Portland Harbour ...Port of Portland Authority ArchivesBack: B'30/8/89' - black textaport of portland archives -
Ballarat RSL Sub-Branch Inc.Floatation Bladder, B.F. Goodrich Co, 1939-45
... There is a rubber pipe at the top, right corner. There is a fabric flap at the base of this pipe which holds the pipe in a bent position. ...There is a rubber pipe at the top, right corner. There is a fabric flap at the base of this pipe which holds the pipe in a bent position. ...This floatation bladder was made for survival whilst crossing rivers and streams. The device would have been inserted into clothing and the user would have blown air into the pipe. The pipe would have been folded in half and held in place to prevent air from escaping.Tough rectangular, flat, khaki coloured fabric and rubber bag. There is a rubber pipe at the top, right corner. There is a fabric flap at the base of this pipe which holds the pipe in a bent position. There are also inscriptions on the front/centre of the bag.The following inscriptions are at the front/cente of the bag, printed in red. The very last inscriptions ('M. KNAUSS') are printed in dark purple. 'BLADDER, FLOATATION, JUNGLE' 'THE B.F. GOODRICH CO.' 'CONTRACT W669QM21639 9-30-42' 'SPECIFICATION P.Q.D. 243' 'STOCK NO. 74-B-303' 'PHILADELPHIA QUARTERMASTER DEPOT' 'INSPECTOR______M. KNAUSS_____' floatation bladder, floatation device, world war two, ww2, wwii, second world war -
Kew Historical Society IncClothing - Bodice, Brown Silk Bodice, 1880s, 1880s
... Beige coloured silk top with narrow mauve stripes. The top has a piped mandarin collar. The top has satin trimming. ...1880s women's dress featured tightly fitting bodices with very narrow sleeves and high necklines, often trimmed at the wrists with white frills or lace. women's clothing, australian fashion, costumes, bodices Beige coloured silk top with narrow mauve stripes. The top has a piped mandarin collar. The top has satin trimming. ...1880s women's dress featured tightly fitting bodices with very narrow sleeves and high necklines, often trimmed at the wrists with white frills or lace.Beige coloured silk top with narrow mauve stripes. The top has a piped mandarin collar. The top has satin trimming. The bodice is badly stained.women's clothing, australian fashion, costumes, bodices -
Flagstaff Hill Maritime Museum and VillageEquipment - Boiler
... Boiler, Scotch Marine Boiler design, cylindrical shape with rivets on the enclosed end, pipe fittings on top and apertures and open pipe ends on the other end.. ...HUIS DORDRECHT 18" Boiler, Scotch Marine Boiler design, cylindrical shape with rivets on the enclosed end, pipe fittings on top and apertures and open pipe ends on the other end.. ...This type of steam boiler is called a Scotch Marine boiler. It was manufactured in Dordrecht, Netherlands, possibly in 1918 by 'DeMan & Teveldhuis'. The only history that we have was that the boiler was found in an unknown paddock. It had an attached tag labelled "Melbourne Steam Club" but never collected by them. It was eventually brought to Flagstaff Hill Maritime Village for display.This boiler is an example of equipment used for a steam driven machine.Boiler, Scotch Marine Boiler design, cylindrical shape with rivets on the enclosed end, pipe fittings on top and apertures and open pipe ends on the other end.. Possibly manufactured by 'DeMan & Teveldhuis' in 1918 in Dordrecht, Netherlands. Inscription embossed on outside of boiler. "19 DE MANS & TEVEL-(D?)HUIS DORDRECHT 18"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, boiler, scotch marine boiler, steam boiler, ship's boiler, dordrecht netherlands, 1918 boiler, melbourne steam club -
Bendigo Historical Society Inc.Photograph - WES HARRY COLLECTION: LANDSCAPE VIEW OF EARLY BENDIGO GOLD MINES
... Black and white photo copy: Image shows mine site, horse harnessed to puddling machine, shaft in immediate foreground, with pipe extending into top of shaft. Horse harnessed to cart on LH side. ...PLACE Bendigo mining Bendigo mining gold puddling Batchelder Black and white photo copy: Image shows mine site, horse harnessed to puddling machine, shaft in immediate foreground, with pipe extending into top of shaft. Horse harnessed to cart on LH side. ...Black and white photo copy: Image shows mine site, horse harnessed to puddling machine, shaft in immediate foreground, with pipe extending into top of shaft. Horse harnessed to cart on LH side. Very early image of mining in Bendigo, no poppet heads visible.Batchelderplace, bendigo, mining, bendigo, mining, gold, puddling -
Lakes Entrance Historical SocietyPhotograph - Tower shaped building attached to a dwelling, Metung Victoria, 1999
... Colour photograph of unusual timber clad tower shaped building attached to a dwelling, building has flagpole and TV antenna on top, metal pipe chimney through a wall. Metung Victoria...Houses Colour photograph of unusual timber clad tower shaped building attached to a dwelling, building has flagpole and TV antenna on top, metal pipe chimney through a wall. Metung Victoria Photograph Tower shaped building attached to a dwelling, Metung Victoria ...Property formerly owned by a doctor.Colour photograph of unusual timber clad tower shaped building attached to a dwelling, building has flagpole and TV antenna on top, metal pipe chimney through a wall. Metung Victoriahouses -
Coal Creek Community Park & MuseumMiners lamp
... 8485.1 - Painted black truncated cone, the base being wider than the top with the narrow pipe extending from the top. The handle is a curve of wide metal strip, also with a tube extending from the top. ...8485.1 - Painted black truncated cone, the base being wider than the top with the narrow pipe extending from the top. The handle is a curve of wide metal strip, also with a tube extending from the top. ...8485.1 - Painted black truncated cone, the base being wider than the top with the narrow pipe extending from the top. The handle is a curve of wide metal strip, also with a tube extending from the top. The top and bottom are slightly domed. -
Flagstaff Hill Maritime Museum and VillageFunctional object - Urinal, circa 1825
... top splash plate with an attached semi-circular receptacle or basin (20cm deep and projecting forward 30cm). At the sides are flanges with bolt holes connecting to a ship's wall. The urinal is drained by a funnel-shaped outlet also made of lead, reducing from a 10cm radius to a joined 5 cm pipe. ...top splash plate with an attached semi-circular receptacle or basin (20cm deep and projecting forward 30cm). At the sides are flanges with bolt holes connecting to a ship's wall. The urinal is drained by a funnel-shaped outlet also made of lead, reducing from a 10cm radius to a joined 5 cm pipe. ...The urinal was probably situated in the forward part of the ship rather than the stern, being one of two placed on either side of the deck and housed immediately adjacent to the doors into the forward castle, or crew sleeping quarters. The toilets on maritime vessels were (and still are) called the ‘heads’, after the sanitation arrangements common until the end of the eighteenth century. The name was given to the ‘head’ of the ship, forward of the forecastle and around the beak or bowsprit. These first lavatories were floored with grating or nets so the force of the sea could wash them clean, and they were always used on the lee or non-weather side so the effluent fell directly into the water rather than back on board. The Children's wrecking: The barque Children was one of the first vessels to be lost in the Western District. The vessel was wrecked to the east of Warrnambool on 14th January 1838. When it ran ashore in hurricane-force winds, 22 passengers and crew were fortunate to escape being battered to death on the rocks. The Children broke up within 20 minutes, sweeping sixteen of those on board to their deaths. After eleven days, the rescued survivors, all of whom were injured, had been taken to Portland. According to Lloyd's Shipping Register 1837-1839, the Children was built in 1825 at Liverpool and operated by owners Gordon & Co, of London. Registration number 123/1837, James Henty then bought her in 1837 as a three-masted barque of 254 tons, with a hull of “part pitch pine, felt sheathed” and “coppered in 1837” at Launceston, registered number 6/1837. In 1838, the Children, under her master Captain H. Browne, completed a successful round trip from Launceston to London (carrying wool and whale oil loaded in Portland), returning in late November of that year carrying a general cargo including house bricks used for ballast. On the 11th of January 1839, the Children sailed from Launceston for Adelaide, with 24 passengers, 14 crew, and an awkward mixed cargo, including 1500 sheep, 8 bullocks, 7 horses, farming implements, and six whaleboats with associated whaling gear. One account states that when the Children was “put out from port, she was light and badly ballasted”. The vessel immediately encountered four days of hurricane-force storms, eventually clearing on the early morning of the 14th. However, it was too late to take accurate measurements of the sun or stars to establish their position relative to the coast. The Children collided with a limestone stack at the entrance of what is now Childers Cove, and the seas smashed the vessel into pieces within half an hour. All the cargo and 16 lives were lost, including 9 children. The Henty brothers contributed £150 towards a fund for the 22 survivors at a memorial service held in Launceston later that year. It was a major financial setback for James Henty and his brothers, but one from which they recovered. In a submission to the Governor of New South Wales dated 24 March 1840, the Henrys summarised their work over the previous six years of establishing the Portland settlement, stating “Six stations have been occupied, one at Portland Bay three at the open country about 60 miles inland called ‘Merino Downs’ They have erected two houses at Portland Bay and two others at Merino Downs”.The urinal recovered from the Children's wreck is significant as part of the original fittings of the early 19th-century barque. The 1839 wreck and recovered artefacts are examples of the construction methods and materials used in that era and can be used to study the evolution of shipbuilding methods and principles. The wreck of the Children is of state significance as one of colonial Victoria’s earliest and most significant maritime disasters, and one of the first vessels lost in the Western District. This is recognised by its inclusion on the Victorian Heritage Register, VHR No. S116. Little is left on the seabed to mark the tragedy, apart from some of the house bricks intended for the Henty settlement. A lead urinal with a rounded back at the top splash plate with an attached semi-circular receptacle or basin (20cm deep and projecting forward 30cm). At the sides are flanges with bolt holes connecting to a ship's wall. The urinal is drained by a funnel-shaped outlet also made of lead, reducing from a 10cm radius to a joined 5 cm pipe. The urinal was recovered from the wreck of the CHILDREN.flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, shipwreck artefact, the children, lead ship’s plumbing, crew urinal, the ‘heads’, ship plumbing, james henty, portland bay, urinal, ship's urinal, ship’s fitting, ship’s lead plumbing, ship’s toilet, ship’s urinal, children, childer’s cove, port campbell, 1839 shipwreck, james henty and co, henty brothers, captain h. browne, portland -
Federation University Historical CollectionTool, British Oxygen Company Ltd, Oxy-cutting and Welding Blow Pipes, c 1904
... Boxed Universal Blow Pipe, presented under a perspex top. Pipes mounted by metal bar and hooks to polished wooden board. ...Boxed Universal Blow Pipe, presented under a perspex top. Pipes mounted by metal bar and hooks to polished wooden board. ...In 1903 the oxyacetylene welding process was developed. Around the same time, new cryogenic air separation processes, based on work undertaken by Carl von Linde and others, replaced the barium oxide process. This paved the way for larger scale and more efficient production. British Oxygen Company, [1905 to 1969] was formally BRIN'S Oxygen Company Ltd from 1886 to 1905. In 1969 it became BOC. These Blowpipes were used at the Ballarat School of Mine c1916 Interesting article = 1917. https://trove.nla.gov.au/newspaper/article/1629321Boxed Universal Blow Pipe, presented under a perspex top. Pipes mounted by metal bar and hooks to polished wooden board. Display case is 69.0cm x 12.0cm x 25.0cmBoth pipes have metal plates indicating information of maker.blowpipes, ocyacetylene, ballarat school of mines, welding, cutting, commonwealth industrial gases, boc, brin's oxygen company, british oxygen company -
Flagstaff Hill Maritime Museum and VillageHeater
... Heater, gas portable with five burners and flexible metal pipe, steel bracket above burner and enamelled top and bottom, painted blue with white speckles. ...flagstaff hill warrnambool shipwrecked-coast flagstaff-hill flagstaff-hill-maritime-museum maritime-museum shipwreck-coast flagstaff-hill-maritime-village heater household goods FOCUS brand Pressed into metal of base are letters "FOCUS -" Heater, gas portable with five burners and flexible metal pipe, steel bracket above burner and enamelled top and bottom, painted blue with white speckles. ...Heater, gas portable with five burners and flexible metal pipe, steel bracket above burner and enamelled top and bottom, painted blue with white speckles. Lid and opening above burner, flue opening at top rear of burner. Four horizontal metal bars across the front. Supported by three curved lion-foot legs. Pressed into metal of base are letters "FOCUS -" Pressed into metal of base are letters "FOCUS -" flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, heater, household goods, focus brand -
Flagstaff Hill Maritime Museum and VillageFunctional object - Rail holder, About 1893, when the ship was made
... The top is a hollow spherical shape with a circular hole cut out on one side, into which the end of a round rail would fit. There are two gouge marks close to each other on one side of the hole, about one centimetre apart, at 1 and 2 o’clock position. The sphere has a hollow pipe...The top is a hollow spherical shape with a circular hole cut out on one side, into which the end of a round rail would fit. There are two gouge marks close to each other on one side of the hole, about one centimetre apart, at 1 and 2 o’clock position. The sphere has a hollow pipe ...This brass rail holder fixture would have been used to hold the end of a rail in place. There is no information as to where the fitting or rail would have been placed on the ship; sailing ships had many brass fittings. It was recovered from the wreck of the La Bella, which lies at the bottom of the Warrnambool Harbour. Some 15 ships are believed to have been wrecked in Lady Bay, but only two have been discovered on the sea floor; the La Bella and the Edinburgh Castle. Both wrecks are popular diving sites and are preserved as significant historical marine and marine archaeological sites. The story of the final voyage of the La Bella is summarised as follows … The ship from which the sailors were rescued was the three-masted, iron and steel barquentine the La Bella, built in Norway in 1893. She was one of two iron and steel ships by Johan Smith, the company being one of the leading shipping families in Tvedestrand, Norway. She was significant to Norwegian shipping, being one of only 27 iron and steel ships ever built in Norway. She was registered in New Zealand and engaged from 1902 in inter-colonial trading of timber in the pacific, between New Zealand and Australia and was often in Port Phillip Bay, Victoria. On 5th October, 1905, the twelve year old La Bella left Lyttleton, New Zealand carrying a cargo of timber bound for Warrnambool, Australia . She was manned by a crew of twelve: the Master, (Captain Mylius, previously 1st Mate of La Bella, appointed Captain to La Bella on 6th February 1903) 2 Mates, Cook, six able seamen, one ordinary seaman and a boy. . Bad weather en route caused her to shelter at Burnie on Tasmania's North West coast. On November 10th, the 37th day of her journey, La Bella approached Warrnambool. Captain Mylius steered her towards Lady Bay Channel in heavy south-west seas and evening mist. He ordered the helmsman to steer for the light. As the ship came round, a tremendous sea struck her on the port quarter, causing her to breach broadside in a north-westerly direction into breakers. The helm was brought round twice more, but each time heavy seas broke over her, the third time throwing the La Bella on to a submerged reef in Lady Bay now known as La Bella Reef (about 100 yards from the Warrnambool breakwater). The sea was so rough that it even wrenched a one-and-a-half ton anchor from its fastenings and into the sea. As Captain Mylius headed to the steel wheelhouse, intending to send up a rocket flare, a huge sea slammed the steel door into him (resulting in massive bruising front and back) Despite his injuries he still managed to set off a blue light, which he held up in his hands. La Bella’s lifeboats were filled with sea water and broke up on their chocks. The blue light was the first indication to people on shore that there was a ship in distress. The Harbour Master, Captain Roe (who lived in the Harbour Master’s House opposite Flagstaff Hill), organised a group of volunteers to crew the lifeboat because the trained crew was unavailable; the crewmen were working on a steamer in Port Fairy at the time. He then poured oil onto the water to try and smooth the sea. At around 11pm three of the crew took shelter in the steel forecastle but the sea crashed into it and broke it up. While the rest of the crew and onlookers watched helplessly in the moonlight the bodies were washed away into the sea, never to be seen again. Some of the crew lashed themselves to the weather rail to keep from being washed away. Watson, the ordinary seaman, became tangled in the rigging lines and was too weak to move, so the 2nd Mate, Robertson, put a line onto him so that he wouldn’t wash off. Around 11pm three of the crew were unconscious from exhaustion. The situation on La Bella was becoming dangerous. The 2nd Mate moved to the ‘house’ and soon afterwards the ship slipped in the heavy sea. The lashings of the 1st Mate and the ‘boy’ Denham had kept them safe until about 2am when they were washed overboard; no one was able to help. One by one, the exhausted crew were being washed overboard, too weak to hold on any longer. During the night the La Bella had broken into two and the deckhouse ran out towards the sea. Two more men drowned when trying to reach the lifeboat. By sunrise the only survivors of the twelve were the Master, 2nd Mate and three seamen. Early in the morning Captain Roe used the rocket apparatus on shore to try and shoot a line to the ship for a safer rescue but each attempt fell short of the target. Several attempts were made by the lifeboat to rescue the stricken sailors, but the rough conditions made this difficult for the boat to get close enough to the ship and the lifeboat had to return to shore. During a final attempt to reach the ship Captain Mylius ordered his men to jump into the sea. Leonard Robertson, 2nd mate, jumped and swam towards the lifeboat, taking hold of the boat hook offered to him. Oscar Rosenholme managed to reach the boat floating on a piece of timber from the ship’s load and a third survivor, Noake, also made the boat. Along with the lifeboat rescue crew, 25 year old William Ferrier rowed his small dingy through the heavy seas and managed to rescue the Captain, whom he landed on the breakwater. Ferrier then returned to the ship to attempt a final rescue, losing his oars and rowlocks into the high sea. Using just a spare paddle he skulled towards the La Bella, reaching her stern in time to cut loose the lone surviving sailor, Payne, from the lashing that held him to the ship; the terrified sailor dropped from the ship and into the dingy. Shortly after the last man was rescued, the La Bella was lifted by a huge wave and crashed back down on the reef; she broke up and sank. The ordeal had lasted ten hours. The survivors were taken to the nearby Bay View Hotel and gratefully received warm food and clothing, medical attention and a place to sleep. In the following days an unidentified body of a young person was washed ashore; it was either Watson or Denham. The body was buried in the Warrnambool cemetery with an appropriate gravestone and inscription. William Ferrier became a national hero as news of the daring rescue spread. In recognition of his bravery in the two daring rescues he was awarded the Silver Medal for Bravery by the Royal Humane Society and was honoured in the letter from the Prime Minister and the Parliament of the Commonwealth, telegrams and a cheque for £20 from the Governor General, over £150 subscribed by the public, including Warrnambool and district and readers of The Argus, and a gold medal from the Glenelg Dinghy Club of South Australia. Ferrier’s rescue efforts are one of the most heroic in Victoria’s shipwreck history. (William Ferrier’s son, Frank, received a similar award almost fifty years later, when he helped rescue four members of the crew on the yacht Merlan, after it ran on to a reef near the Point Lonsdale Lighthouse. ) The wreck of La Bella now lies on her port side in 13 metres of sheltered water inside the reef she struck. The bow section is relatively intact and part of the stern has drifted north-easterly towards the mouth of the Hopkins River. The reef the La Bella struck now bears its name. Those five rescued from the La Bella were Captain George Mylius, Leonard Robertson (2nd Mate, 21 years old), R. Payne, Oscar Rosenholme and Jack Noake. Those seven who lost their lives were Mr Coulson (1st mate), Charles Jackman (cook) Gustave Johnson, Pierre Johann and Robert Gent (all able seamen), Harry Watson (ordinary seaman) and Jack Denham (ship’s boy), Captain Mylius was found guilty of careless navigation; he had sailed into the bay without the services of a pilot. His Master Certificate was suspended for twelve months. Later he was also charged with manslaughter of one of the crew who had died when the La Bella was wrecked, but found not guilty. The event’s adverse publicity and damage to his career took a toll on his health and he died of a heart attack six months after the wreck; he was only thirty-seven. His body was buried in the Melbourne General Cemetery. The La Bella was “the best documented of all sailing ships owned in New Zealand”. Her record books, ship logs, correspondence and supporting papers are still available. At the time of the tragedy, she was owned by Messers David C.Turnbull and Co. of Timaru, New Zealand timber merchants and shipping agents, who had purchased her on 13th December 1901. A detailed account of the last journey of La Bella can be read in “Leonard Robertson, the Whangaroa & La Bella” written by Jack Churchouse, published in 1982 by Millwood Press Ltd, Wellington, NZ. Some 15 – 17 ships are believed to have sunk in Lady Bay, but only two have been discovered on the seafloor; the “La Bella” and the “Edinburgh Castle”. Both wrecks are popular diving sites and are preserved as significant historical marine and marine archaeological sites. As well as this letter, Flagstaff Hill’s La Bella Collection includes a photograph of the wrecked La Bella, a brass rail holder and a postcard of William Ferrier with four of the survivors. This original congratulatory letter sent to William Ferrier by the Prime Minister and Government of Australia demonstrates the importance attached to his efforts for Victoria and to Australia. The letter is part of the La Bella Collection and is significant at both a local and state level. Its connection to the La Bella shipwreck and the rescue of five survivors highlights the dangers of Victoria’s Shipwreck Coast. The letter to William Ferrier from the Australian Government acknowledges the bravery of ordinary Australians who risked their lives to save victims of shipwrecks along the coast. The letter is significant to the history of Warrnambool as it honours William Ferrier, a local fisherman whose descendants continue to live in the area. It highlights the way of life of people who lived in coastal towns in 19th century Victoria and the effects of shipwrecks upon them. The letter connects to the postcard of William Ferrier with four of the five rescued crew, the photograph of the wreck of the La Bella and the artefact from the wreck, the rail holder. This item is significant because of its association with the sailing ship “La Bella” . the “La Bella” is of local and state and national significance. It is one of the only two shipwrecks discovered in Lady Bay, Warrnambool, out of the 15-17 shipwrecks in the bay. Brass rail holder from the wreck "La Bella". This rail holder would have been used as a fitting for the end of a rail. It is made up of two parts and looks a little like a goblet in shape. The top is a hollow spherical shape with a circular hole cut out on one side, into which the end of a round rail would fit. There are two gouge marks close to each other on one side of the hole, about one centimetre apart, at 1 and 2 o’clock position. The sphere has a hollow pipe-like stem with a screw thread turned into the outside of the lower section and the bottom of the stem has been flared out after having the base fitted. The base is round and has a mound in the centre. The edge has four evenly spaced fixture holes around its edge. The metal shows signs of pitting and has mild encrustation. The fitting of the base is loose, allowing it to swivel in a complete circle. The top of the sphere is rough and has a dent in it. Underneath the base there is verdigris; some has flaked off and reveals a bright golden colour underneath. rail holder, brass rail holder, la bella, lady bay, norway, 1893, new zealand, captain mylius, william ferrier, flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village -
Flagstaff Hill Maritime Museum and VillageEquipment - Dentist Drill, Late 19th century
... top of the stand at a right angle and can move up, down and around. There is a pulley each side of the joint of the arm and a short way along the arm is fitted a short metal pipe. ...top of the stand at a right angle and can move up, down and around. There is a pulley each side of the joint of the arm and a short way along the arm is fitted a short metal pipe. ...The design of this and other similar treadle powered dental engine (or dentist drill) was in common use by dentists from the 1870’s into the 1920's. When electricity became accessible to most communities the electrically powered dental engines began to take over from the treadle power. Over the ages teeth were extracted using picks and scissors and other gouging instruments. Bow drills, hand drills and even a "bur thimble" drill were later used to prepare cavities for filling. Some drills were made bendable by attaching flexible shanks between the metal bur and the handle, giving access to the teeth at the back of the mouth. Other mechanical devices were introduced along the way, such as clockwork drills, but they were hard to handle and inefficient. Over the centuries “dentistry has been performed by priests, monks and other healers. This was followed by barbers; the barber’s chair may well have been the precursor to the dental chair. “(SA Medical Heritage Society Inc.) In 1871 James Morrison patented the first commercially manufactured 'foot treadle dental engine', the first practica dental engine although others had been introduced as early as 1790 (by John Greenwood). Handmade steel burs or drills were introduced for dental handpieces, taking advantage of the significant increase in the speed of the drill. In 1891 the first machine-made steel burs were in use. The treadle drill reduced the time to prepare a cavity from hours to less than ten minutes. In 1876 the Samuel S. White Catalogue of Dentist Instruments listed a 12 ½ inch wheel diameter dental engine, with 14 bright steel parts, for sale at US $55 In today’s market, this is the equivalent to US $1200 approx. The specifications of that dental engine are very similar to the this one in our Flagstaff Hill Maritime Village’s collection. It is interesting to note that workings of a similar treadle dentist drill were used and modified to power a treadle spinning wheel of one of the volunteer spinners at Flagstaff Hill Maritime Village. The foot treadle dental engine was a milestone in dental history. “Historic importance of treadle powered machines; they made use of human power in an optimal way” (Lowtech Magazine “Short history of early pedal powered machines”) The invention of a machine to speed up the process of excavation of a tooth lead to the invention of new burs and drills for the handpieces, improving speed and the surgical process of dentistry. They were the fore-runner of today’s electrically powered dental engines. This treadle-powered dentist drill, or dentist engine, is made of iron and steel and provides power for a mechanical dental handpiece that would be fitted with a dental tool. On the foot is painted lettering naming it "The Brentfield" and there is a fine line of light coloured paint creating a border around the name. The paint under the lettering is peeling off. The drill has a Y-shaped, three footed cast iron base, one foot being longer than the other two. A vertical frame is joined into the centre of the base, holding an axle that has a driving-wheel (or flywheel) and connecting to a crank. A slender, shoulder height post, made from adjustable telescoping pipes, joins into the top of this frame. On the post just above the frame is a short metal, horizontal bar (to hold the hand-piece when it is not in use). A narrow tubular arm is attached to the top of the stand at a right angle and can move up, down and around. There is a pulley each side of the joint of the arm and a short way along the arm is fitted a short metal pipe. A little further along the arm a frayed-ended cord hangs down from a hole. At the end of the arm is another pulley and a joint from which hangs a long, thin metal pipe with two pulleys and a fitting on the end. A treadle, or foot pedal, is joined to the long foot of the base, and joined at the toe to the crank that turns the driving-wheel. The metal driving-wheel has a wide rim. Touching the inside of the rim are four tubular rings that bulge towards the outside of the driving-wheel, away from the pole, and all meet at the hub of the axle. The axle fits between the inside of the driving-wheel and the frame then passes through the frame and is attached on the other side. The driving-wheel has a groove around which a belt would sit. The belt would also fit around a pulley on the arm, at the top of the post. The pulley is joined to a rod inside the arm and this spins the drill's hand-piece and dental tool holder. The foot pedal has a cross-hatch pattern on the heel and the ball of the foot has tread lines across it. The end of the toe and the instep areas have cut-out pattern in them. "The ____/ Brentfield / __ DE IN L___" (Made in London) painted on the long foot of the base. Marked on the drill connection is “Richter De Trey, Germany”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dentist, teeth, dental drill, dental engine, treadle drill, foot powered drill, treadle engine, orthodontics, dental surgery, james morrison, the brentfield, richter de trey, german dental fitting, london dental drill -
Flagstaff Hill Maritime Museum and VillageBodkin
... Antique Plumber's Bodkin - wooden pipe flareing too, smooth conical shape with rounded edge and three circular grooves at top....flagstaff hill warrnambool shipwrecked-coast flagstaff-hill flagstaff-hill-maritime-museum maritime-museum shipwreck-coast flagstaff-hill-maritime-village Antique Plumber's Bodkin Antique Plumber's Bodkin - wooden pipe flareing too, smooth conical shape with rounded edge and three circular grooves at top. ...Antique Plumber's Bodkin - wooden pipe flareing too, smooth conical shape with rounded edge and three circular grooves at top.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, antique plumber's bodkin -
Mission to Seafarers VictoriaAlbum - Photographic album, Allan Charles Quinn
... The cover contains the map of South America with a picture of a man with a pipe in his mouth in the top left-hand corner and a picture of a sailing ship in the bottom right. ...The album and photos give a view of Quinn's trips around the world and the many places he visited. album photos allan quinn tourism seafarers sailors seamen ships The cover contains the map of South America with a picture of a man with a pipe in his mouth in the top left-hand corner and a picture of a sailing ship in the bottom right. ...This photo album documents the voyage of Allan Quinn while he was in the merchant navy. The album and photos give a view of Quinn's trips around the world and the many places he visited. Leather-bound photo album. Cover is embossed with a colour map of South America.The cover contains the map of South America with a picture of a man with a pipe in his mouth in the top left-hand corner and a picture of a sailing ship in the bottom right. The inside front cover lists in handwritten columns: ports of call during 1947-48. There are three loose photos inside the front cover. album, photos, allan quinn, tourism, seafarers, sailors, seamen, ships -
Bright & District Historical Society operating the Bright MuseumPipe clay, late 1800s
... Relevant to the gold mining history of the area. tobacco recreation pipe clay goldfields smoking leisure gios Embossed woven pattern on one side of bowl and a shield shaped series of points (5) around the top. ...Part of a collection of goldfield artefacts recovered from the Ovens Goldfields, including the Buckland Valley. The collection also included a large amount of Chinese pottery and artefacts, also goldfields bottles, jars and mining implements. Collected by Aldo Gios, late resident of Myrtleford. The Bright and District Historical Society purchased the collection of Chinese artefacts in 2010. In the collection were other items of interest, including this pipe and others similar.Relevant to the gold mining history of the area.Piece of a clay pipe. A section of the stem is missing. There is a chip on the outer bowl and numerous hairline fractures.Embossed woven pattern on one side of bowl and a shield shaped series of points (5) around the top. EDIND stamped on one side enclosed in a scroll.tobacco, recreation, pipe, clay, goldfields, smoking, leisure, gios -
Federation University Historical CollectionPlan, Creswick Water Supply from Bullarook to Creswick, 02/10/1869
... Coloured plan shows pipe and rack track from the Bullarook Reservoir to Albert Street, Creswick. Attached with ribbon top left are twelve pages giving bearing and lengths / descriptions of pipe and rack track. ...Coloured plan shows pipe and rack track from the Bullarook Reservoir to Albert Street, Creswick. Attached with ribbon top left are twelve pages giving bearing and lengths / descriptions of pipe and rack track. ...Probably gazetted on 12 April 1872 (pg 737)Large horizontal paper plan glued in three sections to a linen backing. Coloured plan shows pipe and rack track from the Bullarook Reservoir to Albert Street, Creswick. Attached with ribbon top left are twelve pages giving bearing and lengths / descriptions of pipe and rack track. Five information boxes drawn along the bottom of plan gives extra information where pipe passes through private properties. Main heading 'Plan of Creswick Water Supply / scale eight chains to an inch / County of Talbot / Parish of Creswick'. Calculations and hand written notes in ink and pencil also on plan. Verso 'Dean Reservoir'. Signed and dated.creswick, water supply, bullurook reservoir, dean, bush inn, hesken, rivers, warner, taylor, gillard, mccormack, mcdonald, brown, naples, humbug hill sluicing co, frank rivers, w.r. taylor, j. and m. mccormack, j. mcdonald, richard brown, c. naples -
Marysville & District Historical SocietyPostcard (item) - Novelty postcard, Valentine Publishing Co. Pty. Ltd, ALL THE BEST FROM MARYSVILLE, 1940's-1960's
... In his right hand is a glass tankard of beer and in his left hand is a pipe. The title of the postcard is across the top edge of the postcard. ...In his right hand is a glass tankard of beer and in his left hand is a pipe. The title of the postcard is across the top edge of the postcard. ...A novelty postcard with pull-out strip of 9 miniature photographs that was produced by the Valentine Publishing Co as a souvenir of Marysville.A novelty postcard with pull-out strip of 9 miniature photographs that was produced by the Valentine Publishing Co as a souvenir of Marysville.ALL THE BEST FROM/ MARYSVILLE 1997 PRINTED PAPER MAILING NOVELTY TO OPEN RAISE FLAP From VALENTINE'S "MAIL NOVELTY" POST CARD COPYRIGHT Printed in Great Britain Tomarysville, victoria, postcard, souvenir, valentine publishing co, crossways cabaret (image 1), taggerty river (image 2), acheron way (image 3), blacks spur road (image 4), nicholl's lookout (image 5), main street marysville (image 6), sugarloaf bay eildon (image 7), steavenson falls (image 8), cumberland falls (image 9)
