Provides information about the UK based Light Rail Transit Association, light rail (tramways), public transport and the future. Has images of light rail systems including Melbourne Z59 at the Bourke St terminus in 1977.Yields information about the UK based LRTA and its work in promoting Light Rail.Pamphlet - folded to DL size, two colour titled "Introducing Light Rail Transit"tramways, light rail, ltra, melbourne, z class, tram 59

Pamphlet, 32 pages, stapled and glued into a green cover slightly larger than the sheets. Titled "The Woods Gilbert Rail Planer Co. Ltd. - Rail Planning Machines" detailing the machines that the company provided with photographs, the type of work done, eg removal of corrugations, list of users including the Melbourne Cable Tramways, MTCo, extract of articles, reports and journals.Has a "CJ Corrugations" in orange pencil on the top front cover.trams, tramways, rails, trackwork, maintenance, rail planning, cable trams

Badge produced by the Rail Tram and Bus Union for members' clothing. Has the word "The Power of Union" on either side of the letters "RTBU".Demonstrates an RTBU badge.Badge - enamel round with a securing pin on the rear.rtbu, union, public transport, unions

Magazine published by the Rail Tram & Bus Union, Winter 2010, Vol 18, No. 2 featuring an article titled "A Century not out" about the 100 years of Malvern Depot. Features an interview with Ron Scholten, Julie Cain, and a photo of Ron along with PMTT trams. Includes notes on the work of the Bendigo Tram Workshops on trams 44 & 84, and has a series of questions about Melbourne's early electric trams.Yields information about centenary of Malvern Depot and the work of Ron Scholten.Magazine - 24 pages, full colour, centre stapled.pmtt, bowen crescent, malvern depot, tram 44, tram 84, bendigo tramways

Produced by the SECV to document the fish plates used on Tram rail.Yields information regarding the Tramrail fishplates.SEC drawing number VW4/28, ""90LB. LORAIN" Tram-Rail Flame Cut Fish Plates". Drawn 10/02/1965. Beige paper copy of original dyeline print. Copy of original.electricity supply department, secv, works division, fishplates

Rail Turning Bar Rail is heavy, sometimes as much as 120 lbs per yard. To assist in being able to move rail, a special turning bar was developed. Usually a long handle, on one end various features in the head allow rail to be moved Historic - Railway Permanent Way and Works - track equipment - Rail Turning BarRail Turning Bar made from cast wrought iron puffing billy, rail turning bar

app.p.48.non-fictionA list of diesel & electric locomotives, railcars & EMUs as at 30 June 1995.locomotives - queensland - history, railway rollingstock - queensland

ill, p.23.non-fictionA brief history of the rollingstock of the State Rail Authority of New South Waleslocomotives - new south wales - history, railway rollingstock - new south wales

ill, p.64.non-fictionDetails of the locomotives and rollingstock of the NSW Rail Transport Museum at Thirlmere NSWthirlmere railway museum - nsw, tourist railways and museums - australia

Demonstrates and Yields information about the track layout and construction details of a major Ballarat Junction, Sturt and Drummond Sts.5079.1 - blueprint of SEC Drawing No. BA-T1-6246, Diamond Crossing of Sturt and Drummond Streets, Ballarat, dated 20.6.1950. Shows the rail layout details of the whole intersection. 5079.2 - digital print of above - made Sept. 2011 by W.Doubleday, from scanned drawing. Drawing Scanned to a pdf file stored in the hi res images files - see btm5079pdf.pdf. Used by Bill Kingsley to plan depot junction - see Reg Item No. 5080. Has various dimensions noted on the drawing in black ink. On rear - has in ink "Sturt-Drummond" and "Recorded in Drawing Office" stamp on rear. in bottom right hand corner "128" - in black ink.sturt st, drummond st, pointwork, junction

City of Stawell Diesel Engine 3. Diesel Rail Engine City of Stawell N467 and three carriages in cutting 4, Close up of Diesel Engine City of Stawell N467 drivers cabin window 5. Diesel Rail Engine City of Stawell N467 pulled up at Stawell StationSix Colour photographs of Orange coloured diesel rail engine stawell

Booklet - "Moving Victoria - A World of experience in Light Rail" - produced by the Victorian Government to advertise and market its expertise in Light Rail manufacturing and operation. Notes Melbourne trams, track infrastructure, Electrical systems and Asset Management. Includes images of Sydney Light Rail and Hong Kong vehicles. Has a forward by Mark Birrell, Minister for Industry Science and Technology (Minister from 1996 to 1999). Includes an extensive list of contacts, companies and their products. See item 7206 for a similar document c2003.Yields information about Victorian Light Rail manufacturing capacity.Booklet - 24 pages, centre stapled titled "Moving Victoria - a world of experience in Light Rail"victoria, tramcar manufacture, sydney, hong kong, melbourne, light rail, tramways, marketing

The rail cart was built by Herbert Syme and ran on rails from the house to the jetty on the southern shore of Fraser Island in the Gippsland Lakes tom transport people, luggage and goods.Black and white photo of people sitting on a rail cart c1930railway, islands, vehicles

Albert E. Williams first studied art under Fred Foster after being awarded a scholarship to the Ballarat East Art School. In 1913 he became one of the first intake of 83 students to study the Merit Certificate at the newly opened Ballarat Junior Technical School. Williams was the second person to receive a certificate from that institution. He then studied under H.H. Smith for the Art Teachers’ Certificate at the Ballarat School of Mines Technical Art School between 1915 and 1920. Williams joined the staff of the Ballarat Junior Technical School in 1921, teaching sign writing, ticket writing and house decoration. He taught in other technical schools between 1923 and 1928, returning to Ballarat in that year to fill a vacancy left by John Rowell . Williams continued his teaching career at both the Ballarat School of Mines Technical Art School and the Junior Technical School until 1942. He taught in various other technical schools from 1943, retiring as Headmaster of the Brighton Technical School in 1964. Albert E. Williams continued producing artwork throughout his career, and was responsible for the education of generations of artists and art teachers. This item is part of the Federation University Art Collection. The Art Collection features over 1000 works and was listed as a 'Bal larat Treasure' in 2007.Pencil drawing of a plaster cast floral form.Written on the mat board below the drawing "Drawing ornament from cast in light and shade. For Drawing Teacher's Secondary Certificate by Albert E. Williams, Tech. Art School, Ballarat."art, artwork, albert e. williams, williams, ballarat technical art school, plaster cast

Wood Stacks at Stawell Rail Yards 1942 with people stacking the wood. Black and white photo and enlarged copy of wood stacks at a rail way line. People working at the site.stawell

These are plans for proposed additions to the Church of Christ in Warrnambool. The date of the drawings and the maker of the plans are unknown. The additions do not appear to have been built. The Church of Christ in Warrnambool was founded in 1875 after a meeting at the Warrnambool Temperance Hall. The building in Spence Street Warrnambool was erected in 1884 at a cost of £1600 and officially opened in 1885. This church was sold and in 2000 the congregation moved to a new building at 186 Raglan Parade (called Gateway Church of Christ).These plans are of some interest as being part of the history of a Warrnambool church – the Church of Christ Warrnambool. These are two rough drawings on cream-coloured paper showing proposed additions to the Church of Christ in Warrnambool. The drawings are in pencil and include the front elevation plan and the first floor plan. The captions are in capital letters. Both pages have tattered edges and are torn across the middle and the pages are stained in places.‘Rough drawing suggested additions for Church of Christ Warrnambool’ ‘Suggested additions for Church of Christ Warrnambool’ church of christ warrnambool, gateway church of christ, history of warrnambool

Rail tractors were popular with Victorian sawmillers. They were generally cheaper than a steam locomotive, required no special qualifications to drive, and used proven power plants for which spares were available locally. The tractor was constructed by Day’s Engineering of South Melbourne which, although better known for its pumping equipment, built more than fifty rail tractors for Victorian sawmillers and other industrial tramway users. W. Day & Sons is believed to have constructed its first light railway locomotive in 1926. From then until the mid 1940s, the firm appears to have built at least fifty locomotives at its premises in South Melbourne, of which roughly half were four-wheel locomotives and roughly half were six-wheel locomotives like the restored Day’s rail tractor formerly operated by Ruoak Timbers. Of the four-wheel locomotives, ten were 2-ft (610mm) gauge locomotives similar to this one. Today, only two survive, a complete example at the Puffing Billy Railway Museum at Menzies Creek, and one at Alexandra Timber Tramway Museum This 2-ft gauge 4wPM locomotive is believed to have been one of two Day's Petrol Rail tractors formerly used by Cheetham Salt, possibly at the Moolap works near Geelong. Service History :owned by Cheetham Salt, Moolap ( dates unknown ) Geelong Steam Preservation Society , Belmont 1973 ? Puffing Billy Steam Museum , Menzies Creek Historic - Industrial Narrow gauge Railway - Rail Tractor used by Cheetham Salt Company works at Laverton, Moolap and Geelong, Victoria , Australia Petrol Rail Tractor made of Iron , wrought iron, steel puffing billy, industrial narrow gauge railway, rail tractor, days engineering, cheetham salt,, petrol rail tractor

Provides details of the history of SECV rail operations in the Yallourn and other power station open cuts and the transport of coal and the locomotives used in the Latrobe Valley operations of the SEC. Possibly prepared in the early 1980s. Rail operations on the interconnecting railway ceased in 2000. Shows outline diagrams of the steam, electric and diesel locomotives and the coal wagons.Provides information about the SEC Coal railways and their rolling stock used for power generation in Victoria.Report or document - 16 A4 pages titled Report - 'State Electricty Commission of Victoria Rail Transport: Yallourn Open Cut"sec tramways, power supply, secv, open cut mining, locomotives, interconnecting railway

The Public Transport Union was formed in 1993 from the various Australian Public Transport Unions, see reference. It was renamed as the Rail Transport and Bus Union in 1998 to reflect the impact of privatisation. See 4201 and 7089 for the earlier badge of the same layout. Demonstrates a badge issued to members of the RTBUBadge - Rail Transport and Bus Union. The badge is made on a brass backing with the words "Rail Transport and Bus Union" on the outer edge of the badge with a black enamel background. In centre of badge are images of the modes of transport the union covers - trams, rail, and buses on a yellow background within a map of Australia. On the rear is a spring pin clip and the name of the manufacturer - Pratick Sydney and a telephone number. tramways, trams, badges, personnel, unions, employees, ptu, rtbu

HistoricalLarge blue drawing book with right hand corners cut off at angle. Includes hand drawn maps and sketches of flowers, characters and geometry. Federal Drawing Bookoswald underdown, drawing book, sketching

Colac was the centre of a spidery rail network over which were carted anything and everything by Victorian Railways, the common carrier throughout the area. The main line through the region was the 35 km rail route from Birregurra (and thence to Geelong) though Colac to Pirron Yallock (and thence to Warrnambool and Port Fairy) from March, 1877, to July, 1883. The first branch line ran from Irrewarra to Beeac in 1889, which then extended in stages to Cressy and on the Ballarat. The second branch line was the 31 km long Birregurra to Forrest in 1891. The cost of building railways into mountainous terrain meant the third branch line was a narrow-gauge 2 foot 6 inch line, first of all to Beech Forest in 1902, and then to Crowes in 1911, for a total of 71 km. The final rail connection was the 16 km branch from Colac to Alvie to facilitate the transport of onions, opening in 1923. Each line had its own character and peculiarities derived from its foundation, geography and economic base. As a general rule, the loadings on the branch lines had greater output tonnage than inwards, the reverse of the main line. The lines traversed agricultural and timber areas where inputs like seed, grass, fertiliser and labour were minor, compared with the output, timber, wool, cream, butter, cheese fruit, potatoes, onion, grain and livestock.Rail Centre Colac. Rail stations in the Colac Otway Shire, 1877 to 2014. Norman Houghton. 1st ed. Norman Houghton; Geelong (Vic); 2014. vi, 262 p.; illus., maps, index. Soft cover.colac; cressy; forrest; beech forest; crowes

Original photograph taken around 1916 when the Linton rail line was extended to Skipton.Black and white copy of original photograph of men with horses and wagons in cutting. The photograph is understood to show men digging the rail cutting between the Glenelg Hwy and the Mortchup Rd reservoir in Linton.railway, workers, rural activity, railway line extension to skipton 1916

One of a series of photographs featuring the Fisken Family and the Lal Lal EstateThe image shows the interior of the drawing room of the well known Fisken familyA black and white photograph showing the interior of the drawing room at Lal Lal Park c 1900"The drawing room, first homestead Lal Lal Park".fisken family, lal lal estate, rural life, drawing room interior

Letters written by Robert Robertson Rail. Sent from France and England during World War 1, the majority of letters are to his mother, with a small number to other family members.Small case of approximately 200 letters written to his family by Robert Rail (5411 - 24 Battalion, 14 Reinforcement) while on active service in WW1.ww1, letters, western front, robert robertson rail, 24 battalion

Drawing shows the layout of the Melbourne tram system in 1990. Has a detail for the City area, prior to the expansion into Docklands and relocation of Batman Ave. Legend shows safety zones, loading zones, tram stops and substations, along with details of intersections, curves and crossovers.Yields detailed information about the Melbourne tram system layout in 1990.Dyeline print of drawing PTC drawing No. P16245tramways, tram stops, map, light rail, substations

The train smash occurred in Sunbury between the Station Street level rail crossing and Sunbury Station on February 6th 1952 at around 10pm. The goods train was being pulled by the green locomotive, which was used to take the Jubilee train throughout Victoria in 1951, to acknowledge 125 of European settlement in Victoria, ran into the back of another stationary goods train on the rail line. The guard, A.C Read, in the stationary goods train was killed. P J Mcwhirter, the guard in the other train was injured. The tree lined street in the background is Horne Street.This smash was one of a number that have happened along the Sunbury rail line and in the vicinity of Sunbury Station over the years.A black and white photograph with a white border of a train smash which wrecked a steam engine and carriages. Workmen are on the tracks surveying the wreckage. A rail crossing is in the background.jubilee train, train crashes, station street, sunbury railway station, a c read, p j mcwhirter

Yields information regarding cross section of 80lb tramrail.SEC drawing number W-575/1, "80 LB. Rail Fishplate & Guardplate". Drawn 6/1955. Beige paper copy of original dyeline print.Copy of originalsecv, state electricity commission of victoria, ballarat tramway, ballarat tramway museum, ballarat, electricity supply department, works division

This book was used in pencil drawing classes in primary schools.A book with a grey cover and black lettering and drawings. It was used as a drawing book with a pencil drawing on the first page.Top LH corner written in pencil "PHILLIPA WHITE"white, phillipa, primary school, teaching, state education, george evans collection

Drawings shows on a street plan of Melbourne, tram routes, route numbers location of cross overs, and track availability of pantograph only, pole only and dual running. Dated 5/6/1996Demonstrates a PTC document for detailing overhead availability and cross overs.Drawing - Document - folded A3 sheettramways, ptc, pantographs, trolley poles, overhead, cross overs, route numbers, tram routes