This cigarette or pipe lighter was in use in the mid 1900's when the majority of users were men. Ladies did smoke but mainly not in "public" The activity was still regarded as a male activity. Middle to Upper "Class" of women nearly always had a gentleman "at hand" that would "light up" her cigarette. This was seen as a "social" activity only but later in the mid 1900's onward it was quite acceptable for both sexes to "smoke" at anytime.This type of lighter was male orientated due to the degree of lighting the flint with the horizontal movement required a strong thumb action across the lighting wheel. It is significant to rural areas such as the Kiewa Valley as the majority of men (especially during and after World War II) regarded smoking as a way to ease off the "tension" of hard work. The socio-economics of the Australian work place changed after the emancipation of women in the "workforce" after the World War II depleted the male workforce for the duration of the War and changed the Australian ethics of women in all aspects of both city and rural working "so called" male only occupations.This Roller Beacon lift arm cigarette/pipe lighter has a chrome plated brass shell and is fueled by petrol. To operate this lighter you lift the "snuffer" arm(long roller lift arm) exposing the horizontal external flint tube, then scrape the flint wheel to create a spark (to light the wick) from the adjacent flint(resting on the brass ignition wheel).At the base to the left of the "filler" screw "PATENT No. 485037, 818155" underneath "REG. DES. N" on the filler screw "ROLLER REG" underneath "TRADE MARK". To the right of the "filler", "THE ROLLER BEACON MADE IN ENGLAND"early hand lighters, smoking in the 1930's, cigarette lighter, cigarette, tobacco

Built by Aveling & Porter Ltd., Rochester, Kent, England Builder’s Number 11629 of 1923 Weight 10 Tons Used by the South Melbourne Council in road construction between 1926 and 1963 Aveling and Porter was a British agricultural engine and steam roller manufacturer. Thomas Aveling and Richard Thomas Porter entered into partnership in 1862, developed a steam engine three years later in 1865. The company became the largest manufacturer of steam rollers in the world. Service History : Title: City Surveyor's report Creator: Johnson, A.L Publisher: Prahran City Council Date: 1921 .... The 10-ton steam roller worked 302 days, the Aveling and Porter 12½-ton roller worked 211 days while the Garrett steam wagon continues to carry tar and road materials. city of prahran annual reports 1912-1913 http://www.stonnington.vic.gov.au/files/assets/public/history/city-of-prahran-annual-reports-1912-1913.pdf Industrial Steam Roller - Road Construction, South Melbourne, Victoria, Australia Aveling & Porter 10 ton Steam Roller with roof and rear tool box Builders Number 11629 Aveling & Portersouth melbourne, puffing billy, steam roller, aveling and porter, puffing billy museum, road construction, road steam

The Procession of floats travelled from the Eltham Shopping Centre to Eltham Lower Park on Saturday 10th April as part of the Shire of Eltham centenary celebrations program. A steam Roller and diesel roller. One of a series of three photgraphs. Participants in the parade included the Eltham Film Society, Scout group, Eltham volunteer fire brigade, riders on horses and horse and carts. A cowley roller from the Melbourne Steam traction engine club and a McDonald roller represented Eltham Shire Council in the 19th and 20th centuries. Another float includes a bark hut with trailer representing pioneers with a banner reading "The trues heroes our pioneers". Eltham Village is under construction by H.M. Keast & Sons, Master Builders. This photo forms part of a collection of photographs gathered by the Shire of Eltham for their centenary project book, "Pioneers and Painters: 100 years of the Shire of Eltham" by Alan Marshall (1971). The collection of over 500 images is held in partnership between Eltham District Historical Society and Yarra Plenty Regional Library (Eltham Library) and is now formally known as 'The Shire of Eltham Pioneers Photograph Collection.' It is significant in being the first community sourced collection representing the places and people of the Shire's first one hundred years.Digital imagesepp, shire of eltham pioneers photograph collection, shire of eltham, shire of eltham centenary, centenary celebrations, parade floats, parade, diesel roller, steam roller, h & m keast & sons, eltham village, main road, eltham, melbourne steam traction club

The Number 2 Steamroller was used in public road building in Kew.It replaced the first Council steamroller which was used between 1915 and 1932.Rare photograph of a Kew City Council piece of road making machinerySmall black and white photograph of a steamroller used by the City of Kew in road construction from the 1930s to the 1950s.Reverse of photo: "KCC No 2 Roller 607S". Accompanying note: "20/3/84 Gift to the Society from Mr [?] who was K.C.C. [Kew City Council] driver of this "monster". Kew City Council No.2 Roller. Used in street construction 1950. Roller probably 1930 era."road construction - kew (vic), no.2 steamroller, steamrollers - kew (vic)

Jelbart Road Roller property of Northcote Council, circa 1930. This roller was manufactured in Ballarat by Jelbarts, whose foundry was located in Mair Street.jelbart, ballarat, mair street, manufacturing, road roller, northcote, foundry

Jelbart Road Roller property of Northcote Council, circa 1930. This roller was manufactured in Ballarat by Jelbarts, whose foundry was located in Mair Street.jelbart, ballarat, mair street, manufacturing, foundry, northcote, road roller

Jelbart Road Roller property of Shire of Frankston and Hastings circa 1930. This roller was manufactured in Ballarat by Jelbarts, whose foundry was located in Mair Street. jelbart, road roller, mair street, manufacturing, foundry, frankston, hasting, ballarat

Mock Wedding - Roller Skate Clubstawell

Pencil on paper student's technical drawings Turf Roller: .1) Assembly .2) Details - frame .3) - .4) Details technical drawing, mechanical engineering

Pencil on paper student's technical drawings Turf Roller: .1) General assembly .2) Transmission .3) Frame .4) Manilla folder with design specs technical drawing, turf roller, engineering design

Jelbart Road Roller in Doveton Street North. In the background is the Longhurst Bakery which became The Highlander Pub, then the Peter Lalor and now the Pub with Two Names.jelbart, road roller, ballarat, manufacturing, doveton street north, longhurst bakery, highlander, hotels, pubs, peter lalor, pub with two names

Lists provide information about the type of equipment fitted to W2 class trams 1 - "Trams fitted with D K (Dick Kerr model) controlleres - dated 15/7/1963 2 - "Class W2 cars with 28" dia wheels" - 11/7/1963 3 - "Roller Bearing trams" - listed by motor type, giving the number armatures for GE 288, BTM 265, MV 101 and MV 101 BR motors - These trams were fitted with roller bearings on their armatures = dated 14/10/64. Yields information about the equipment fitted to W2 class trams during the mid 1960sSet of lists - carbon copies on either foolscap or quarto paper.trams, tramways, tramcars, motors, wheels, armatures, dick kerr, w2 class

Poster advertising a skating carnival at St Kilda Roller Rink, on the corner of Acland and Barkly Streets, on 1 October 1932. The program included a Kiddies Carnival, Adults Carnival and Road Race from Princes Bridge to the rink.White paper, discoloured with age, printed on one side in blackst kilda roller rink

Yields information about tram 11, the Jelbart roller and the two work sheds in Wendouree Parade. The work sheds were seldom photographed.Colour slides, Kodak white cardboard mount, developed Sept 1968 of No. 11, passing the Jelbart road roller and the two SEC worksheds in Wendouree Parade. No. 11 has the destination of Mt Pleasant and a Twin Lakes sign. ballarat, tramways, trams, wendouree parade, jelbart, trackwork, tram 11

Chase Roller, used for transporting printing Chases' full of lead print.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Photo shows a damaged grip car with bent staunchions and the grip mechanism being lifted with a block and tackle by a uniformed tramway man. The actual cutting notes that a lady's leg was injured in the incident.Yields information about damage to a grip car and lifting the grip out of position.Black and white print notes on the rear.On rear in ink "M&MTB Damaged cable tram grip car, result of an accident with a steam roller in Victoria St North Richmond, on 10/4/1923. Copy ex 'Sun' 11/4/23 in C Craig Collection. (15/7/71) and K S KIngs stamp with number '95-21'. "tramways, trams, cable trams, accidents, victoria st

Hollow metal lawn roller, with painted green frame, and Hungerford 'Flexigrip' rubber handlegrips. Handlegrips are U.S. patented 2.618.986, issued 25 November, 1952. Materials: Metal, Rubber, Painttennis

Source: Mr. R.B. Ness, Kangaroo GroundThis photo forms part of a collection of photographs gathered by the Shire of Eltham for their centenary project book,"Pioneers and Painters: 100 years of the Shire of Eltham" by Alan Marshall (1971). The collection of over 500 images is held in partnership between Eltham District Historical Society and Yarra Plenty Regional Library (Eltham Library) and is now formally known as the 'The Shire of Eltham Pioneers Photograph Collection.' It is significant in being the first community sourced collection representing the places and people of the Shire's first one hundred years.Digital imagesepp, shire of eltham pioneers photograph collection, kangaroo ground, roller skating club, kangaroo ground hall

Originally contained in a 'magnetic' photo album believed to have been donated by Mr Eric Stephenson, Jingalong, 110 Ryans Road, Eltham, Vic. 3095; relocated to archival safe storage.Colour photographwhittlesea show, steam roller

Colour photographindustries, skaterz, susan street

Donated through the Australian Government's Cultural Gifts Program by Michael Cook, 2021

Photo 0028 Steel construction with Wooden Roller Steel Wheels,Rachets & Wheel. Wood Handle Sides Ornate E.W Bank Jewel Rd No 32 6684 Metal Bar over Rollers " Wring at the ends of Roller--hand to finger at 24

Used in S.C.M Wonthaggi . The roller cable was supported by a frame between the rails, it was on the cable.Heavy duty cable roller

Ref: ebay sale same item description : 'Pill Maker dating from the late 1800s, used by chemists to mould ingredients into pills. It consists of two main parts, the board and the roller. The roller is made of wood with two handles. It fits over the sides of the board and has wheels to enable it to roll backwards and forwards. The underneath of the roller is fitted with a brass plate with grooves in it that match the board, enabling the mixture to be pressed into the grooves and formed into a tubular shape, ready to be weighed and cut into pills. The board is made of mahogany with brass sides and matching brass grooves'. Apothecary Pill Maker of brass and mahogany, in two parts, the board and the roller. The roller of thick wood with two handles, which fits over the sides of the board and has brass rollers to enable it to roll backwards and forwards. The underneath of the roller is fitted with a brass plate with grooves in it that match the board, enabling the mixture to be pressed into the grooves and formed into a tubular shape, to be weighed and cut into pills. The board is made of mahogany with brass sides and matching brass grooves. Numerals.pill roller, chemist