This handmade barrel sling has been crafted and used for hoisting barrels onto ships.This handcrafted barrel sling is an example of the ropework that sailmakers are skilled in. It is typical of the equipment carried on ships in the 19th and 20th centuries and used at docks for loading and unloading the cargo.Barrel sling; handmade hemp fibre ropework formed into a sling to support and carry a barrel or cask.flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, barrel sling, ropework, cargo handling, loading sihps, dockside handling, freight handling

An example of elaborate enamel signage acquired as a result of the long standing close links of Naval forces with the Mission to Seafarers from 19th C onwards. A rectangular black enamel sign on metal ground featuring polychrome insignia of Naval Ordnance Inspection and Design. The insignia shows circular border of ropework encircling a red ground depicting a black and white cannon with a large lynx type feline. The ropework border is surmounted by a stylised crown like structure comprised of: a split focsle?, two sails with red pennants or burgees and stern of a galleon and around the band of the crown a red 'jewel' flanked by two blue green 'jewels'Insignia wording in yellow on black ground in upper case letters: " NAVAL ORDNANCE INSPECTION / AND DESIGN / SAFETY AND QUALITY " Below insignia in white paint in upper case letters: "INSPECTOR NAVAL ORDNANCE / MELBOURNE" ordnance, naval, design, safety, inspections, insignia, badge, sails, cannon, lynx

The shrouds or fore-rigging are a part of the standing rigging on a sailing ship. They are used in pairs on each side of a ship to help hold the masts in place and to aid the sailors who climb the rigging. They are part of the basic framework for the sails. Larger vessels may have two or three pairs, and some ships may have upper and lower shrouds. The upper shrouds would be fixed to a protruding structure on the top of the masts so that they hung from the right angle. The ropework skills of the sailmaker would be used to create the shrouds, choosing fibres with properties suitable for the job at hand and creating the triangular shape carefully. Deadeyes and ropes were then used to attach the shrouds to the ship's structure.This shroud is an example of a part of the standing rigging of a sailing ship. Shrouds were used in pairs on larger sailing vessels to help hold the masts in place and give access to adjustable rigging such as sails.Fore Rigging or Shrouds, made from rope fibres. This shroud includes the upper and lower wooden deadeyes. They are part of a ship's rigging. flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, shroud, fore-rigging, ropework, sailing ship rigging, standing rigging, natural fibres, sailmakers, handmade, deadeye, knot making

The shrouds or fore-rigging are a part of the standing rigging on a sailing ship. They are used in pairs on each side of a ship to help hold the masts in place and to aid the sailors who climb the rigging. They are part of the basic framework for the sails. Larger vessels may have two or three pairs, and some ships may have upper and lower shrouds. The upper shrouds would be fixed to a protruding structure on the top of the masts so that they hung from the right angle. The ropework skills of the sailmaker would be used to create the shrouds, choosing fibres with properties suitable for the job at hand and creating the triangular shape carefully. Deadeyes and ropes were then used to attach the shrouds to the ship's structure.This shroud is an example of a part of the standing rigging of a sailing ship. Shrouds were used in pairs on larger sailing vessels to help hold the masts in place and give access to adjustable rigging such as sails.Fore Rigging or Shrouds, made from rope fibres. This shroud includes the upper and lower wooden deadeyes. They are part of a ship's rigging.flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, shroud, fore-rigging, ropework, knot making, sailing ship rigging, standing rigging, natural fibres, sailmakers, handmade, deadeye

The Display Board of Konts was handmade in Kings Lynn, Devon, England, by Tom Long DSM, a member of the International Guild of Knot Tyers. Tom Long more recently lived in a suburb of Melbourne. This display board shows the knots and joins used in ropework performed by a sailmaker and other skilled knot tyers and ropeworkers. It demonstrates the uses of some of the knots, such as knobs and handles, suspending lengths of wood, reinforcing spliced rope and even for decorative work. The sailmakers, travelling as part of the ship’s crew, stored their tool kit in a canvas ditty bag. It contained needles, awls, a sailmaker’s leather-palmed glove with a heavily reinforced palm, a shuttle to mend and make nets, fids, knives, mallets, brushes, rulers, and rope gauges. Sailmakers used their ropework and knot-making skills for various purposes and chose the type of rope fibre for its particular properties. For example, Italian hemp rope was preferred for the light line used in shore-to-ship rescues because it was lightweight, not easily knotted, and absorbed less water. A supply of various types of rope was a commodity on board a ship and on land in the new colonies. It was flexible, easily stored, and could be worked to create an endless variety of objects on its own or with other materials like wood. An example is a simple rope ladder. Lengths could be combined to make various thicknesses, and pieces could be skilfully joined together by splicing. The importance of knots in seafaring cannot be overestimated. When ships relied on only the wind for power and speed, there were a huge number of various ropes in use, particularly about the sails and rigging. Seafarers would be judged on their ability to tie knots speedily and correctly. A mounted display of authentic seamen's knots is on a board covered in blue fabric. Various rope grades and fibres were used to work numerous knots and splices. Some of the uses are familiar, such as the toggle, the pineapple knot, and the Turk’s head. A selection of rope grades and fibres was used to work numerous knots and splices. Some of the uses are familiar, such as the toggle, the pineapple knot, and the Turk’s head. The name or purpose of the knot is on the label below it. Labels below each knot give its name or use.flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, knot display, knot making, ropework, marine technology, sailmaker's work, sailor's knots, ship's rigging, seamen's knots, handmade, rope craft, knots, splices, display board of knots, knot board, tom long, sailmaker's knots, mariner's knots

The Port of Melbourne was leased to private operators post 2015, State Govt remains landowner and regulatory authority. The Company of Master Mariners continues a regular association with the Mission to Seafarers regularly holding events and meetings on the premises.The Port of Melbourne insignia on this desk lectern may well be replaced in subsequent decades. The desk is used for presentations at many events.Wood cabinetry desk lectern with sloped reading surface and bearing two wooden shield mounted insignia, one above the other. Uppermost Insignia a) features a crest supported by 2 flanking seahorses and shield with victorian flag and 2 enamelled ribbons with inscription. Insignia B features circular crest with a 'coronet' of sail and galleon surmounting a ropework crest with an Anchor and chain at the centre.Insignia a) "PROSPERITY THROUGH SERVICE" / PORT OF MELBOURNE Insignia b) COMPANY OF MASTER MARINERS On inner panel of lectern in gilt lettering "Company of / Master Mariners "master mariners, the port of melbourne, mission to seafarers

Kinnear Ropes (Kinnears Ropeworks) was one of Victoria’s most important industrial manufacturers, a major rope, twine, fibre and synthetic‑yarn producer whose Footscray factory located in Ballarat Road opposite Droop Street operated for a full century (1902–2002). From the earliest days of Baden‑Powell, rope was one of the Scout’s essential tools. The use of rope was a foundational skill in Scouting because it taught self‑reliance, teamwork, safety, and outdoor competence.This sample Board was donated to the 3rd Sunshine Scout Group by Bill Miller who worked at Geo. Kinnear & Sons. The sample board hanged in their Scout Hall Nixon Street Sunshine.A masonite display board with 13 different sizes of ropes attachedKinnears Ropes Geo. Kinnear & Sons Pty Ltd 118 King Street Melbourne 3rd Sunshine Scout Groupkinnears ropes, ballarat road, footscray, scouts, scouting

Bonegilla was the biggest and longest‑running migrant reception centre in post‑WWII Australia. It operated from 1947 to 1971 and received over 300,000 migrants from more than 50 countries. Bonegilla was the distribution hub for labour in Victoria. From this camp, people were sent to work in: - Factories (e.g., Sunshine Harvester Works, Kinnears Ropeworks, Olympic Tyres) - Railway workshops - Housing Commission estates - Construction projects - Hospitals and domestic service A huge proportion of these migrants then later settled in: - Sunshine - St Albans - Keilor - Braybrook - Albion - Footscray 5475. 01 - Bonegilla Migrant Camp Photograph.jpg 5475. 02 - Bonegilla Migrant Camp Photograph.jpg 5475. 03 - Bonegilla Migrant Camp Photograph.jpg 5475. 04 - Bonegilla Migrant Camp Photograph.jpg 5475. 05 - Bonegilla Migrant Camp Photograph.jpg 5475. 06 - Bonegilla Migrant Camp Photograph.jpg 5475. 07 - Bonegilla Migrant Camp Photograph.jpg bonegilla migrant camp, bonegilla

This hook is part of a rope machine.Hook from a rope-making machine, with nut and bolt endingflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, hook, rope machine, ropework, rope-making machine

This handmade barrel sling is used for hoisting barrels onto ships. It is made from hemp fibre and is part of the equipment carried on 19th and early 20th century vessels for loading and unloading barrels and casks at the docks.This barrel sling is significant as equipment typically carried on board sailing ships for use in port when loading and unloading cargo.Barrel sling, handmade from hemp fibre.flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, barrel sling, cask, dock, loading cargo, ship equipment, sailmaker, ropework

This handmade rope ladder is an example of maritime equipment. It could be easily folded and stored and was useful for many purposes including fixing the ship's rigging.The rope ladder is an example of handmade maritime equipment using the shills of a ship's carpenter or sailmaker. It was simple to make, easily stored and useful for many purposes including the ship's rigging. The rope ladder is significant for being the only rope ladder in our collection of maritime equipment. Rope ladder. Handmade ladder with three wooden steps joined by thick rope lengths between them. Each step has rounded corners and a large hole near each corner. The tope is threaded and knotted to create an equal distance between the upper, centre and lower steps. flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, ladder, rope ladder, handmade ladder, ship's ladder, maritime equipment, rigging, ropework

This rope-making machine, called The New Era Rope Machine, was patented in the USA on July 18th 1911. It was made by the Continental Trading Corporation Ltd. in Chicago, USA. The ends of the rope would be threaded through the matching and hooked onto the machine's claws on the other side. The machine's handle would be rotated manually, which would twist the rope ends together, entwining them to make one thick rope.This manually operated rope-making machine is a labour saving devise used particularly by sailmakers in their rigging and ropework tasks. Rope-making machine, metal. The model is "The New Era Rope Machine". The manually operated machine has three claws through which roping material is threaded. Internal wheels have cogs around their perimeter. The two pieces that make up the machine's case are bolted together. Made by Continental Trading corporation Ltd Chicago USA. The machine was patented on 18th July 1911."The New Era Rope Machine" " Continental Trading Corporation Ltd Chicago USA" "Patd july 18 1911" "Made in USA" "Keep oiled"flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, ropework, the new era rope machine, patented, 1911, textile machine, continental trading corporation ltd., chicago, rope-making machine, textile industry

Fids were used for spreading strands of rope so that they could be spliced, for making knots, loosening or holding knots open and holding holes in canvas open. This item recognises the art and skill of knots and sailors’ ropework. Modern fids are typically made of aluminum, steel, or plastic.A narrow cone-shaped tool. It is made of wood.tool fid equipment shipping maritime