State Bank [Victoria] promotional ruler. Wooden ruler.Stamped with State Bank [Victoria] logo.state savings bank of victoria, state bank

Came from Giselda Bannister's mother's (Estelle Bannister) home.Wooden ruler with stand used to dressmaking to measure hems.Ruler marked with 1-29 inch markings.dressmaking, ruler

Used by Ken Nicholls at the Buninyong State School around the 1950s.Twelve-inch wooden ruler with measurements imprinted on front and back.Measurement markings imprinted on both sides.measurement, education, buninyong primary school

Used by Grant Mattingly when he first started work in as Book-keeper.Round black ruler with imprint of rings on end. Used in an accountants office for book - keeping.Round rings imprinted on each end.commerce, bookkeeping

Used within the Nicholls family.A wooden carpenter's ruler folds into four nine-inch sections with precision made brass hinges.Paper label inscribed 'Please keep. Donated by Harry Nicholls. woodwork, carpentry, rulers, measurement

Used by Army Survey Units to quickly draw parallel lines for map production since 1944.A Brass 2.5" (6.5cm) wide Ruler 15" (38cm) long with brass rollers. Ruler is enclosed in a wooden protective boxRuler engraved with " A.L. FRANKLIN SYDNEY No 514 1944 D^D", Box labeled 407royal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr

A wooden ruler with raised metal dots marking the spacings on the ruler. Made prior to 1971, when metric measurements were introduced, this 18-inch ruler is a demonstration of how easily a simple visual measuring tool could be adapted for varying degrees of sight by the use of tactile markings. 1 wooden ruler with metal pins as measurement pointsassistive devices, royal national institute for the blind

A 30 cm, flexible ruler with marked numbers and Braille. Sticker on the back of the ruler (since lost): "30cm flexible ruler, Cat No 1-03030, American Printing House for the Blind. Louisville. KY 40206-0085. For ages 3 & up. 1 white ruler with black large print numbers, black measurement indicators and brailleassistive devices, aph

30 cm tactile yellow ruler with black marking every 5 centimeters with raised markings, has two different edges - straight and notched. The straight edge can be used for measuring and drawing, and the notched edge designed to help place pins when creating charts and graphs or using a compass. There are non-slip pads on the back of the ruler. 1 yellow ruler with black large print numbers and black measurement indicatorsRNIB LT21 (on back)assistive devices, royal national institute for the blind

This ruler was distributed and sold as an advertising tool for the Warrnambool business of Swintons’ Pty Ltd. William and Ann Swinton were pioneer settlers in Warrnambool and established a grocery and general store in 1865 in Timor Street. Today the Swinton family still has business interests in Timor Street. It appears that this ruler was used in the crockery department of the Swinton general store in the 1920s. This ruler is of minor interest as a memento of the Swintons Timor Street store in the 1920s. Wooden rulers would have been used to a great degree in the 1920s, especially by school children. This is a wooden ruler with imperial measurements up to 12 inches. It is flat on one side and slightly curved on the other side. It has black printing on the top and handwritten black writing on the base. It has been well-used but is still relatively clean and legible.‘A Safe Rule Always Purchase at Swintons’ Pty. Ltd. Warrnambool Buy the Best Pay the Least.’ ‘Crockery Department 29/10/29’ swintons pty ltd, swinton family, warrnambool, history of warrnambool

Wooden rulerA good foot ruler use Kiwi boot polish. Every morning kiwi gives a quick and lasting shine.

From the Betty McPhee ruler collectionWooden ruler used as a promotional ruler. Inscribed with rules of Police Traffic School. Measures in inches to one foot and in fours and eights to one foot.Bank of New South Savings Bankschool, equipment, domestic items, writing equipment

Wooden rulerG-G trademark - globe showing Australia. 12 inches and mm's . 'T.Thorley' inscription. Ink marks.

Wooden ruler 12 inches and mm's . The 'Shell' inscription. Back has 'degree' measurements

From the ruler collection of Betty McPhee.Wooden ruler to measure in tenths, fourth's, eights, twelfths and 30cmsWindsor School Rulerschool, equipment, domestic items, writing equipment

Timber ruler with black imperial measurements stamped in black ink along one side."Commonwealth of Australia" stamped red ink word "RULEX" printed over map of Australia stamped in red ink. "A FLIGHT NO. 12, SQDN DARWIN 1939" handwritten in blue ink.education, ruler

Guide to fishing in Victoria - includes ruler for measuring fish, and a list of fish, minimum sizes and legal limits.Fish length ruler. Black and aqua text on white card.fishing

The item was a donation to Ballarat School of Mines sometime in the early forties. It was handed in to Geoff Biddington thinking it may have nostalgic relevance to the Museum Collection. He handed it on to Bill Ryan who was the collector - Museum Exhibit. The type of solid brass ruler may have been used in Drawing Offices of Consultants - Engineers, Architects, Surveyors. Brass rule with straight edges. Mounted on grooved roller mounts. Lifting knobs at each end. Polished wooden box (blackwood) with brass hinges and clips.brass, ruler, engineers, architects, surveyors, museum collection, geoff biddington, bill ryan, exhibits

This measuring ruler was used in the planning and making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This ruler is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This ruler was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Ruler; folding wooden ruler, 36 inches long. Two small notches match with tiny pins when folded. This ruler is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship model sovereign of the seas, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, measuring instrument, ruler, folding ruler, sovereign of the sea, ship model, hobby, ship model tool, english war ship

This ruler was issued as a promotional item by flour manufacturer J.McAlpin & Sons, Abbotsford, whose products were sold under the McAlpin brand,.This item is an example of a commonly used pre-decimal item. McAlpin's was a Victorian company that became pre-eminent in its product range throughout Australia in the first half of the twentieth century.A wooden ruler. It is marked in inches/tenths. On it is "McAlpin's Flour - The rule for Better Baking since 1900".B.S. & S. MELB. AUSTpromotional-item mcalpin-&-sons ruler

These rulers have been distributed by the Warrnambool chemist, George Le Couteur as advertising tools for his business. George Le Couteur operated a pharmacy at 78 Liebig Street, Warrnambool from 1896 to 1908. Born in Warrnambool in 1856 Le Couteur was educated at the Anglican-sponsored Warrnambool Common School No. 691 and then spent four years at Beechworth Grammar School. He was apprenticed to the Warrnambool chemist, Michael Ryan and then worked as a chemist in Kyneton and Melbourne. When he returned to Warrnambool he took over the business of Frank Uren in Liebig Street, building a second storey on to the building. He was very active in community affairs in Warrnambool. He left Warrnambool in 1908 to open a pharmacy in Hawthorn, Melbourne. When he retired in 1935 he was the oldest registered chemist in Victoria. The information hand printed on the back of one of the rulers has an historical inaccuracy in that J.A. Bromfield was not the first known chemist in Warrnambool. These rulers are of interest because of their connection to the pharmacy business of George Le Couteur He was a prominent person in Warrnambool in the 19th and early 20th centuries.These two oblong wooden rulers have imperial measurements ( to 12 inches). There is black printing on both sides advertising a Warrnambool chemist. One ruler is much stained and has a piece missing on the centre top edge. The other ruler has information on one side hand printed in black ink.‘With compliments of G.T. Le Couteur, Chemist, Liebig Street, Warrnambool’ ‘For a cough or cold use Le Couteur’s Pectoral Cough Mixture. Bottles 1s.6d., 2s.6d.’ ‘First Chemist Shop in Warrnambool 1853 Mr A. Bromfield – Chemist, rebuilt 1898 by G.T. Le Couteur – 1973 shop same as at 1898 situated 78 Liebig Street’ george le couteur, history of warrnambool

The Wodonga Historical Society Haeusler Collection provides invaluable insight into life in late nineteenth and early twentieth century north east Victoria. The collection comprises manuscripts, personal artefacts used by the Haeusler family on their farm in Wodonga, and a set of glass negatives which offer a unique visual snapshot of the domestic and social lives of the Haeusler family and local Wodonga community. The Haeusler family migrated from Prussia (Germany) to South Australia in the 1840s and 1850s, before purchasing 100 acres of Crown Land made available under the Victorian Lands Act 1862 (also known as ‘Duffy’s Land Act’) in 1866 in what is now Wodonga West. The Haeusler family were one of several German families to migrate from South Australia to Wodonga in the 1860s. This ruler belonged to Louis Haeusler (b.1878) and is one of the many objects in the Haeusler Collection that represent home and farm life in early twentieth century Wodonga.This item has well documented provenance and a known owner. It forms part of a significant and representative historical collection which reflects the local history of Wodonga. It contributes to our understanding of domestic and family life in early twentieth century Wodonga, as well as providing interpretative capacity for themes including local history and social history.Wooden fold out carpenter ruler with bendable brass hinges and imperial measurements engraved into the wood. Imperial measurements (inches) engraved on arms of ruler. carpentry, carpenter, woodwork, wood, ruler, building, diy, wodonga, farm, haeusler collection

This style of rule was very popular in the 1930s and 1940 and was a necessity in any tradesman or handyman's tool kit. It was donated to our Society by Ray Fischer of Barnawartha near Wodonga. Rabone & Sons were a long established rule manufacturer. Michael Rabone carried on a business as a rule maker at 8 Snow Hill, Sheffield, England from about 1780. The business was continued by John Rabone and his (John's) grandson, Eric Rabone. It operated under the name of John Rabone & Sons from 1784 -1953, becoming a public company in 1948. The company's headquarters were in Birmingham, England. Lasting through to the early 1960s as an independent family business, the company merged with James Chesterman and Co of Sheffield.This rule was donated by a member of the Wodonga district from his farm workshop.A brass 24" folding ruler made by J. Rabone & Sons, Birmingham, England. It is marked No. 1243. It consists of two twelve inch sections, hinged at one end.J. RABONE & SONS BIRMINGHAM NO> 1243j. rabone & sons, carpenters' tools

Custom made for the Burnley Horticultural College classrooms (prior to 1983)Hardwood custom made classroom aid - a straight line ruler with right angle. Written on with texta and stamped in the wood. Hole drilled in non right angle end to hang on a nail.Text marked 'B.H.C. 23 Do not remove from classroom'. Stamped in the wood 'B.H.C'.burnley horticultural college, teaching aid, classroom aid

Ruler recovered from the SS Time during salvage processA small navigational ruler marked for lengths and anglesMarkings showing length and angles in inches. Made in England. ruler, navigational instruments, ss time

This measuring ruler was used in the planning and making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This ruler made by instrument makers J Rabone and Sons of Birmingham, is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This ruler was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Ruler, folding, wooden with brass hinges. Maker J. Rabone & Sons, Birmingham. Model No. 1375. It is warranted to be made of Boxwood. Length is 24 inches, divided into 1/8th inches on one side and 1/16th inches on the other side. This ruler is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”.“J RABONE & SONS / BIRMINGHAM”, “WARAND BOXWOOD”, “NO 1375”flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship model sovereign of the seas, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, measuring instrument, ruler, folding ruler, j rabone and sons of birmingham england, ruler model 1375, sovereign of the sea, ship model, hobby, ship model tool, english war ship, j rabone and sons

Blue coated brass rule with straight edges. Mounted on grooved roller mounts. brass, ruler, engineers, architects, surveyors