Standard issue item as used by Warrant Officer Class 2, Robert Palmer Matthews, Royal Australian Army Ordnance Corps, who served in 161 (Independent) Reconnaissance Flight, in Vietnam from 22 Dec 1970 until 23 Dec 1971. Red cord lanyard with knotsmatthews, 34974, ordnance, vietnam, shoulder cord, aiguillette, 161 recce

Bugle, copper with brass trimming, chrome mouth piece, brass eyelets for cord shoulder strap.musical instruments - brass section, metalcraft - copperware, military history, bugle

Part of the Kevin John Herdman No. 397661 Collection. See Catalogue No. 5942P for details of his service record.Yellow cord shoulder lanyard with loop for attaching to a uniform jacket breast pocket. Knots are Turk's Head style.kevin john herdman, uniform, lanyard

This uniform was worn by Lieutenant Colonel D J Hunter OAM RFD when serving with the 8th/13th Victorian Mounted Rifles. Lt Col Hunter joined 8/13 VMR from 20th National Service Training Battalion in 1956 and served with the regiment till 1967, and again 1977-1980. 8/13 VMR was raised as part of the Citizen Military Forces in May 1948 and was linked with 4th/19th Prince of Wales's Light Horse in October 1990 as part of an Army reorganisation.This uniform is well provenanced, complete and in good condition, and is representative of the uniform worn by an officer of the 8th/13th Victorian Mounted Rifles, a regiment with lineage dating from 1885, but no longer an active regiment in the Australian Army.Khaki wool fabric battledress style jacket with embroidered badges of rank and shoulder titles, yellow cord lanyard, and ribbon bar denoting Australian Active Service Medal, Vietnam Logistic and Support Medal, Australian Service Medal 1945-75, Reserve Forces Decoration and Commemoration of National Service Medal.victorian mounted rifles, uniform

Uniform jacket, Black doublet style with gold braid around stand-up colar, fastened with 7 silver, diamond shaped, scotch thistle buttons. Black braid around cuffs, and pocket and tail flaps. Black cord epaulettes on shoulders, left has a cord lanyard loop. 3 strips of gold braid on sleeve cuffs, front pocket flaps (2), tail flaps (2). Gold, daimond shaped, scotch thistle button on epaulettes, pocket flats, cuffs, one between tail flaps (another is missing). Black lining in body, white striped lining in sleeves, Padded shoulders, Label "David Lack Pty Ltd, uniform specialist Melbourne."Label "David Lack Pty Ltd, uniform specialist Melbourne."flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, uniform, historical uniform, melbourne clothing, schttish thistle button

This jacket appears to be part of the uniform of a junior officer of the 11th (North Devonshire) Regiment of Foot, a line infantry regiment of the British Army. Several companies of the regiment were stationed in Sydney and Hobart between 1845 and 1857. The jacket was acquired by Brighton Historical Society around 1971 as part of a collection of clothing belonging to the Ward Cole family of 'St Ninians', 10 Miller Street, Brighton. George Ward Cole was an early member of the Victorian Parliament and his family featured prominently in Melbourne Society in their time; the family lived at St Ninians from around 1841 until the early 1900s. It is not known who the jacket belonged to or how it came into the Ward Coles' possession. While George Ward Cole was a military man, his service was with the British Navy and during an earlier period than is indicated by this jacket (1807-1817).A red and green flocked cotton military jacket believed to be part of the uniform of the 11th (North Devonshire) Regiment of Foot. The jacket features a green high stand collar secured at the throat by three brass hook and eye closures. The red jacket bodice secures down the centre front with fourteen brass buttons and finishes approximately at the navel. The bottom line sits on the waistline at the sides and back, tapering lower to the naval at the centre front. The bottom line features two substantial brass hooks one on either side of the waist to secure the jacket to the pants. The shoulder line of the jacket is a neat tight fit on the true shoulder, with a slim fitting curved sleeve with gathered fullness at the shoulder. On each shoulder is a metallic corded epaulet with North Devon XI button and second button with floral motif. At the base of the sleeve is a green cuff like detail with a curved elongated point towards the elbow. At the base of each sleeve is a further two brass regiment buttons. The cream woolen jacket lining is lightly quilted over the breast.st ninians, george ward cole, brighton, military, british army, devonshire regiment, north devonshire regiment of foot

The design of this and other similar treadle powered dental engine (or dentist drill) was in common use by dentists from the 1870’s into the 1920's. When electricity became accessible to most communities the electrically powered dental engines began to take over from the treadle power. Over the ages teeth were extracted using picks and scissors and other gouging instruments. Bow drills, hand drills and even a "bur thimble" drill were later used to prepare cavities for filling. Some drills were made bendable by attaching flexible shanks between the metal bur and the handle, giving access to the teeth at the back of the mouth. Other mechanical devices were introduced along the way, such as clockwork drills, but they were hard to handle and inefficient. Over the centuries “dentistry has been performed by priests, monks and other healers. This was followed by barbers; the barber’s chair may well have been the precursor to the dental chair. “(SA Medical Heritage Society Inc.) In 1871 James Morrison patented the first commercially manufactured 'foot treadle dental engine', the first practica dental engine although others had been introduced as early as 1790 (by John Greenwood). Handmade steel burs or drills were introduced for dental handpieces, taking advantage of the significant increase in the speed of the drill. In 1891 the first machine-made steel burs were in use. The treadle drill reduced the time to prepare a cavity from hours to less than ten minutes. In 1876 the Samuel S. White Catalogue of Dentist Instruments listed a 12 ½ inch wheel diameter dental engine, with 14 bright steel parts, for sale at US $55 In today’s market, this is the equivalent to US $1200 approx. The specifications of that dental engine are very similar to the this one in our Flagstaff Hill Maritime Village’s collection. It is interesting to note that workings of a similar treadle dentist drill were used and modified to power a treadle spinning wheel of one of the volunteer spinners at Flagstaff Hill Maritime Village. The foot treadle dental engine was a milestone in dental history. “Historic importance of treadle powered machines; they made use of human power in an optimal way” (Lowtech Magazine “Short history of early pedal powered machines”) The invention of a machine to speed up the process of excavation of a tooth lead to the invention of new burs and drills for the handpieces, improving speed and the surgical process of dentistry. They were the fore-runner of today’s electrically powered dental engines. This treadle-powered dentist drill, or dentist engine, is made of iron and steel and provides power for a mechanical dental handpiece that would be fitted with a dental tool. On the foot is painted lettering naming it "The Brentfield" and there is a fine line of light coloured paint creating a border around the name. The paint under the lettering is peeling off. The drill has a Y-shaped, three footed cast iron base, one foot being longer than the other two. A vertical frame is joined into the centre of the base, holding an axle that has a driving-wheel (or flywheel) and connecting to a crank. A slender, shoulder height post, made from adjustable telescoping pipes, joins into the top of this frame. On the post just above the frame is a short metal, horizontal bar (to hold the hand-piece when it is not in use). A narrow tubular arm is attached to the top of the stand at a right angle and can move up, down and around. There is a pulley each side of the joint of the arm and a short way along the arm is fitted a short metal pipe. A little further along the arm a frayed-ended cord hangs down from a hole. At the end of the arm is another pulley and a joint from which hangs a long, thin metal pipe with two pulleys and a fitting on the end. A treadle, or foot pedal, is joined to the long foot of the base, and joined at the toe to the crank that turns the driving-wheel. The metal driving-wheel has a wide rim. Touching the inside of the rim are four tubular rings that bulge towards the outside of the driving-wheel, away from the pole, and all meet at the hub of the axle. The axle fits between the inside of the driving-wheel and the frame then passes through the frame and is attached on the other side. The driving-wheel has a groove around which a belt would sit. The belt would also fit around a pulley on the arm, at the top of the post. The pulley is joined to a rod inside the arm and this spins the drill's hand-piece and dental tool holder. The foot pedal has a cross-hatch pattern on the heel and the ball of the foot has tread lines across it. The end of the toe and the instep areas have cut-out pattern in them. "The ____/ Brentfield / __ DE IN L___" (Made in London) painted on the long foot of the base. Marked on the drill connection is “Richter De Trey, Germany”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dentist, teeth, dental drill, dental engine, treadle drill, foot powered drill, treadle engine, orthodontics, dental surgery, james morrison, the brentfield, richter de trey, german dental fitting, london dental drill

This jacket, along with the rest of the dress uniform, belonged to an individual named H.E Schulze. It is believed to have been dropped off to the RSL, so no additional information is known. This uniform serves as an example of the military dress worn by the Royal Australian Army (Royal Australian Artillery Regiment) during the late sixties.Khaki jacket featuring two buttoned chest pockets and a belt. A rope cord is draped across and under the right shoulder of the jacket (referred to as a lanyard). There is a single patch (of red and blue colouring) that is located at the top of both sleeves, with an additional patch at the bottom of the left sleeve.Both patches read "ROYAL AUSTRALIAN ARTILLERY". Inside jacket tag reads "E.W. PTY/LTD. / SOUTH AUSTRALIA 1968 / CLASS 8405-66-025-6422 / BATCH 8/68 / MILL AV / SIZE OF CHEST 41/42 PR / MATCHING TROUSERS 39 PR / DRY CLEAN ONLY / CREASE UPPER HALF / OF LAPELS ONLY / NAME: SCHULZE HE / ARMY No. 3164207"lara, rsl, royal australian army, royal australian artillery, war

In 2024, while doing some renovations at the Orbost Customer Service Centre / Library, Council staff have found some boxes of old Orbost Municipal Band uniforms and flags which date back to the late 1970s (when it’s understood the band wound up). These items were offered to the O D Historical Society for its collection. A selection was made (3364). The first Orbost Brass Band was formed in 1889. Around 1908 the town band split and the Orbost Workers' Band was formed. Eventually the two bands merged in 1913 to reform as the Orbost Municipal Band under conductorship of Charles Spink. The band continued for many years but was later disbanded and again reformed. This was to happen a number of times, the last time being in 1961 and continuing through to the late 1970's. Also refer to items in the O D H S collection. Further info and Ref: In Times Gone By - Deborah Hall The items are significant because they are authentic parts of the Orbost Municipal Band. A number of items of clothing (cap, coat, gloves, jacket, badges, trousers), banner, insignias, whistle. These are all items associated with the Orbost Municipal Band. The costume items are all dark blue/black with gold and red trims. Gloves are white/cream gauntlet style. Whistle is silver. The banner is red background with gold trims and O M B appliqued. 3364.1 cap, dark blue with front visor, red ribbon decoration, 2 gold buttons on sides; large gold metal decoration of a lyre with crown on top a the front. 3364.2 pair of gloves, gauntlet style, white/cream leather, silver studs 3364.6 large jacket, dark blue/black, woollen, red epaulets on shoulders with gold buttons, 4 gold buttons on front, 6 on sleeves, gold braiding; drum badge on sleeves, 2 lyre badges; gold lanyard on right sleeve. Gold on black cloth badge on shoulders. A whistle is also with this jacket. 3364.4 small jacket, dark blue/black, woollen, red epaulets, gold studs, 2 lyre studs on lapels 3364.5 small trousers. dark blue/black, woollen. Red stripe down outside of both legs. 3364.3 a 41 cm square square red cloth banner, with gold fringe on the bottom, gold tassle on top with gold cord. Has O M B in large lettering appliqued to the banner. labels on clothing: F. Maxey & Son P/L - on cap Simpson's Gloves P/L Vic. - gloves Hersh's - on badges, also trousers, and jacket OMB - Orbost Municipal Band - on banner ORBOST - on cloth badges orbost municipal band, orbost bands

Uniform jacket, Black doublet style with silver braid around stand-up colar, fastened with 7 buttons (missing). Black braid around cuffs, and pocket and tail flaps. Black cord epaulettes on shoulders. 3 strieps of silver braid on sleeve cuffs, front pocket flaps (2), tail flaps (2). Button missing from front, epaulettes, pocket flats, cuffs,tail flaps (2). Black lining in body, white striped lining in sleeves, Padded shoulders, Label "David Lack Pty Ltd, uniform specialist Melbourne." Name tag has handwritten in pen "- 2 7" Label "David Lack Pty Ltd, uniform specialist Melbourne." Name tag has handwritten in pen "- 2 7" flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, uniform, made in melbourne, supplier of uniform, david lack pty ltd, scottish thistle button

Uniform jacket, Black doublet style with silver braid around stand-up colar, fastened with 7 silver, diamond shaped, scotish thistle buttons (1 missing). Black braid around cuffs, and pocket and tail flaps. Black cord epaulettes on shoulders. 3 strieps of silver braid on sleeve cuffs, front pocket flaps (2), tail flaps (2). Silver daimond shaped, scotish thistle button on epaulettes, pocket flats, cuffs, between tail flaps (both missing). Black lining in body, white striped lining in sleeves, Padded shoulders, Label "David Lack Pty Ltd, uniform specialist Melbourne." Label "David Lack Pty Ltd, uniform specialist Melbourne." flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, uniform, uniform maker, melbourne uniform, david lack pty ltd, scottish thistle button

Standard issue battle jacket for the Royal Australian Artillery, issued by defense department. Pattern 1949 Khaki Battle Dress Blouse. Two deep button breast pockets, Four buttons on right side concealed by right side jacket. Belt hem located at the bottom with buckle. Hemmed arm cuffs with one button on left and right sleeves. Two internal pockets on right and left side. Cord lanyard hanging from left sleeve. Patch with words 'Royal Australian Artillery' embroidered in red on navy on both left and right shoulders. Separate embroidered crown placed above both embroidered text patches. Material with embroidered crown attached with button at the top on right and left shoulder. Crown is made up of red, purple, cream and brown string. Material loop attached inside top of jacket at the neck.Sewn patch with inscription R. J. Hatch & Co. 1950 Size......... MADE IN AUSTRALIA Regimental No. ...................... Name Stamp on inner lower jacket - '170' with arrow point up to the number.military uniforms, army, battle jacket

For NBC Warfare.1. Mask - Gas. Full face mask that looks like silicone rubber, black colour. There are two plastic eye pieces and the lower front has a circular exhaust port. Also on this port is a small pipe that can be connected to a water vessel. On the left side is a large inlet filter. 2. Bag - canvas. The bag is a drab olive colour with a nylon shoulder strap. On the back are a couple of mount straps. One side has a small pocket with a cord. The other side has a pocket with a "lid", held shut with Velcro and a press stud. Inside the bag are numerous mounting straps. there is also a small pocket sewn against the front section. 3. Glove - neoprene black - left glove only.Written on top of lid is :- “TURNER R (?) L63792”nbc warfare, equipment, gas mask, canvas bag

Original owner: "SARAH WEBSTER". ???. Cade Kindness. Army DPCU (Disruptive Pattern Camouflage Uniform) workdress. Colours beige to mid brown, light purple and grey. Cotton polyester fabric. Buttons, plastic, colours beige and khaki. 1.Shirt - workdress. Collar, shoulder epaulettes, two front pockets with concealed plastic zip side closer. Long sleeves with cuffs and velcro strap. Front - six buttons with concealed placket. Sleeves with pocket and concealed two button flap. Manufacturers label, back below collar. 2. Pants - waistband with belt keepers, two side pockets, two large patch pockets with plastic zip and flap. One back pocket with button. Nylon/ metal zipper fly. Draw cord and toggle cuff. DPCU fabric pocket lining. Manufacturer's label right, pocket lining. 3. Hat, workdress bush hat style. Crown, brim, towelling inner sweat band and chinstrap, woven cotton beige cord with plastic toggle and label. Manufacturers label. Black ink print on white fabric label. 1. "....../ 2006/ ^ / 8415-66-153-8722/ Size 85S/ NAME / SERVICE NO./ 75% Cotton/ 25% Polyester" with laundry instructions. Handwridtten black ink "WEBSTER". 2. "ADA/ VICTORIA 2006/ ^ / SPECIFICATION ARMY.................542/NSN 8415 66 153 ...41/ Size 80R /NAME/ SERVICE NO. / 75% Cotton/ 25% Polyester". Laundry instructions "MADE IN AUSTRALIA" . 3. “S.O.S.. MARINE/ BATCH # 0303 / MARCH 2003/ ^ / NSN 8415-66-148-9804/ SIZE SML".uniform, army, work dress, dpcu, sarah webster

Information with jacket: "RARE AUSTRALIAN SOLDIER'S 'GIGGLE JACKET' (WORKING DRESS) 1939-1945".Jacket - khaki colour cotton twill fabric. Bomber style jacket with collar, shoulder epaulettes, long sleeves with cuffs, attached waist band with draw cord tape. Two inside patch pockets. metal buttons on front closer. Manufacturers label - white cotton fabric - back below collar.Manufacturers information - black ink print. "N.422/ MADE IN AUSTRALIA/ 1943/ SIZE" Black ink stamp on fabric. "^/ ?B".uniforms, work dress, jacket, army

1. & 2. Jacket and belt, khaki colour wool/polyester fabric. 1. Jacket - Service dress style. Collar, shoulder epaulettes, four front pockets, top with button down flaps. Gold colour plastic buttons with shank and metal pin. Buttons have raised emblem - Queen's Crown, shield, three cannons - Royal Aust. Army Ordnance Corps. Rank insignia patch on sleeve, two stripes - tarnished gold braid - Corporal. Lining, green colour polyester fabric. Manufacturer's label - white cotton label, left side lining. 2. Belt - with holes, gold colour plastic buckle, leather strap and button belt keeper. Brown plastic buttons. 3. Lanyard - red colour cotton/polyester cord.Manufacturers information - black ink print. "E.W. P/LTD/ SOUTH AUSTRALIA/1966/^/ SIZE NO REGULAR/ CLASS 8405/66-019-8465/ ARMY NO./ NAME/ DRY CLEAN ONLY/ REPRESS USING IRON AND DAMP/CLOTH OR MEDIUM TO HOT STEAM IRON/ CREASE UPPER HALF OF LAPELS ONLY." Handwritten black ink pen. "14327/ McPHEE" - Blue ink pen "523/ 6/66 691".uniform, army, service dress, jacket

1. Jacket - khaki colour wool/polyester fabric, service dress style. Buttons missing. Collar, shoulder epaulettes, four front pockets, top with button down flap with 2 concealed metal press studs. Gold colour plastic buttons with shank. Buttons have raised emblem - Queens Crown, circle and lettering "ER" - Royal Australian Corps of Transport. Rank Insignia patch on sleeve. Two stripes - gold colour braid - Corporal. Lining - green colour polyester fabric. Manufacturers label - white cotton fabric - left side lining. Two lapel badges, gold, silver and dark blue colour plastic. Queen's Crown star, laurel wreath and lettering "ROYAL AUSTRALIAN CORPS OF TRANSPORT". 2. LANYARD - NAVY AND RED COTTON/POLYESTER CORD. 3. Beret - dark blue colour wool/felt fabric with black colour cotton lining. Manufacturer's label - white cotton fabric. Badge on front - gold, silver and dark blue colour plastic. Queen's Crown Star, Laurel wreath and lettering "ROYAL AUSTRALIAN CORPS OF TRANSPORT".Manufacturer's information - black ink print. 1. "E.W.P/Ltd/ SOUTH AUSTRALIA/ 1967/ ^/ SIZE (41 reg)/ CLASS 8405/ 66-019-8466/ ARMY NO/ NAME/ DRY CLEAN ONLY/ REPRESS USING IRON AND DAMP/ CLOTH OR MEDIUM TO HOT/ STEAM IRON/ CREASE UPPER HALF OF LAPELS ONLY". 2. HILLS HATS LTD/ NEW ZEALAND 1992/ DEF. AUST 5047/ SIZE: MEDIUM/ NAME/ N.S.N. 8405-66-136-2951.uniform, army, service dress, jacket, beret

Left side - Campaign and service medals = Left to Right. 1. Conspicuous Service Medal. 2. Australian Active Service Medal - 2 clasps - 1 RAQ 2003 - ICAT Afghanistan 2001. 3. Afghanistan Campaign Medal. 4. Iraq Campaign Medal. 5. Australian Service Medal - 2 clasps - Balkans 1997 - 2004, - Sinai - Egypt. 6. Defence Force Service Medal - 3 clasps (25 Years). 7. Australian Defence Medal. 8. North Atlantic Treaty Organisation medal (NATO) 9. British IRAQ Medal. 10. North Atlantic Treaty Organisation and clasp ISAF> 11. Multi National Force and Observers Medal - Sinai - Egypt (These are replica medals). Award badge - Crossed swords with Laurel wreath dark bronze colour = ARMY COMBAT BADGE. Right side - Top to Bottom. Award Badge = COMMANDER 2nd DIVISION COMMENDATION BRONZE 1998-99 Badge = STEYR INDIVIDUAL READINESS Badge Name Badge = Rising Sun Emblem with "GREG WESTHEAD"' Badge = RECENT INSTRUCTOR BADGE. Uniform Jacket, trousers, shirt, necktie, lanyard, medals, beret. 1. 2. & 4. Fabric outer - khaki colour wool and polyester. Lining - dark khaki polyester. 1. Jacket - Service dress style, shoulder epaulettes, four front patch pockets with button down flap. Gold colour plastic buttons with raised emblem - Rising Sun Badge. Army shoulder epaulettes - gold colour 'AUSTRALIA' badge. Cloth shoulder patches - eft sleeve top - gold, black and red. Rising Sun with Queen's Crown and lettering "THE AUSTRALIAN ARMY". Middle - silver and brown crossed rifles = Marksmanship Proficiency. Lower and right sleeves Rank Insignia Patch in colour. Australian Coat of Arms = Regimental Sergeant Major. Lapel Badges - gold colour plastic - Queens Crown above laurel wreath with centre crossed swords = Royal Australian Corps of Military Police. Front left side - Campaign and Service medals Mounted and Award badge. Right side - one award badge and three badges.(Fabric, metal and plastic). 2. Trousers - waistband, belt loops, fob pocket, two side pockets and one back pocket with button down flap. Bottom green plastic metal and nylon zipper fly. Fabric and lining as above. 3. Shirt - light khaki colour polyester/cotton fabric. Short sleeves, collar, shoulder epaulettes, two front patch pockets with button down flap. Buttons - beige plastic. Left and right shoulder and rank cloth patches as per jacket. 4. Necktie - fabric and lining as above. 'V' shape on ends. Two makers labels. 5. Lanyard - braided red and black colour cotton cord with knots. 6. Medals - mounted medals with ribbons. Metal pin on back. 7. Beret - red colour wool felt fabric with black colour polyester and plastic lining. Oval shape. Black colour vinyl trim with ribbon for size adjustment. Front - badge = Royal Australian Corps of Military Police - Queens Crown, Laurel wreath and crossed swords - gold colour plastic and metal.1. & 2. Manufacturers information on lining in black print on white colour fabric. "ADA/MADE IN CHINA/ AUG 2016/CC30BK or CC3087/ ^/ NSN 8405 66 162 6301 or 607?/ SIZE: 110R OR 85R/ NAME:/ PM KEYS NO:/ OUTER: 60% WOOL/40% POLYESTER/LINING: 100% POLYESTER/DRY CLEAN ONLY/ DO NOT WASH/ IRON UNDER DAMP CLOTH/ WARM IRON". 2. Handwritten black ink 'WESTHEAD/ 317595". 4. Tie - top label "ADAY" Lower label "ADAY"/ MADE IN CHINA/ MAY 2016/ 60% WOOL/ 40% POLYESTER/ DRY CLEAN ONLYuniform, army, military police, westhead

This back pack was used on Operation "Slipper", Afghanistan. May - Oct 2007 by "Lee Palfrey." Palfrey collection, refer Cat No 10263.A large 'Cordura', DPC pack. It has a single opening at the top. It has a black waterproof 'Neck' with cord and toggle. The flap that covers the top has a zippered pocket. The two sides of the pack have pouches. These have a flap that is held shut with a zip. At the bottom of the pack is an arrangement of 25mm black nylon straps, to hold a tent or bed roll for example. On the top flap is the commercial brand name "Vertical". The padded shoulder straps are adjustable - but not quick release. No skeleton here but the pack has a flat strengthening panel.lee palfrey, army, equipment, afghanistan, back pack

Identity discs commonly known as 'dog tags'. Frederick Victor Clive LOWERY enlisted in the AIF on 19.6.40 in the 2/4th Australian Light Anti Aircraft Regt. Discharged from the AIF 30.8.45. Refer 192.2, 187.3, 190P..1) Rising sun hat badge, blackened brass. .2) & .3) Two Rising sun lapel badges, blackened brass. .4) & .5) Two "Australia" shoulder badges, blackened brass. .6) & .7) Two Identity discs, one round, one 8 sided(cord missing).6) 0 - 4 (reverse) LOWERY FVC C of E VX 28403 .7) 0 - 4 (reverse) LOWERY FVC C of E VX 28403 numismatics, badges, military, indentification discs, wwii, world war ii, second world war, dog tags

Item re Frederick Gardner DAVEY DFC No 410533 RAAF. Refer Reg No 3536P for his service details.Khaki canvas haversack consisting of 2 compartments covered with a flap & secured with circular metal press studs. 2 circular perforated metal air holes are on the bottom of the sack. Khaki webbing shoulder strap attached to the sack with metal hooks. A piece of cord is attached to a metal ring on one side.Printed on inside of a flap: W&G LTD 1941 Handwritten in blue on same flap: 1321055 CAREY P.L.canvas, haversack, military

IAN ALFRED (Joe) LYONS MBE Born 16.2.1915 in Bendigo enlisted in the RAAF aged 25 years on 27.5.1940, No 400095. Starting in the ranks as an LAC, he rose to Flt/Sgt pre-embarkation. He embarked for the Middle East on 2.11.1941before dis-embarking to serve with No 3 Sqd RAAF. During heavy action on 8.1.1942, his plane was forced down due to engine damage. It landed in an enemy minefield and when it came to a halt, its wheels were straddling a mine. After being rescued by a British officer, dozens of mines were located and dug up. On return, some 15 miles from base, the vehicle Lyons was travelling in hit a mine (on 9.1.1942), resulting in 5 KIA or WIA. Lyons spent 2 weeks in hospital with severe concussion and deafness. Lyons the embarked for Australia on 11.3.1942 before disembarking on 18.4.1942. He was posted to Townsville with 82nd Sqd on 27.6.1944. Subsequently he was posted to Noemfoor Island on 21.9.1944 as Operational with 82nd Sqd and promoted to Flt/Lt (Temp.) on 3.1.1945. On 6.1.1945 he was posted to 77Sqd as Operational on Morotai. This deployment ended on 9.7.1945. Records show that he flew 26 Strike/Attack missions and 13 others with both squadrons. Post WW2, Lyons remained with the RAAF with a new service number (033072). On 2.2.1948 he was posted to Japan before returning to Australia on 28.8.1948, apparently for medical reasons. He was appointed Flt/Lt on 23.9.1948 before returning to Japan and Korea on 22.8.1950. He was awarded an MBE as Operations Officer with 77Sqd for 'Outstanding enthusiasm and energy at 3 Korean bases'. A US Bronze Star was awarded to Lyons for 'Distinguished and meritorious service as Operations Officer in Korea during the period 14.10.1950 to 17.2.1951'. After Korea, Lyons received a number of posting from Victoria to Western Australia. He was awarded the Air Efficiency Medal in 1964. At his own request, Flt/Lt Ian Alfred 'Joe' Lyons MBE, retired from the RAAF HQ OP COM on 15.12.1967. The photograph is part of the Ian A. 'Joe' Lyons MBE Collection.Framed hand tinted colour head and shoulders photograph of a man in an RAAF uniform. The photograph is bordered with a light brown matt. THe wooden frome is painted white and gold. A white printed label bearing the name of the man is located below the photograph. Clear perspex covers the photograph. The photographer's name also appears below the photograph. The rear of the frame is covered in brown paper secured with masking tape. Two eyes and white cord are attached for hanging purposes.Handwritten in black below the photograph: 'VINCENT KELLY, Bendigo'.raaf uniform, photograph, flight lieutenant ian a. lyons

1. Hat - Camouflaged bush hat. Standard army bush hat, 6 cm brim. it has an ad hoc nylon string to hold it on head. It also has a large torn hole in it. 2. Jumper - Khaki, it has camouflaged shoulder pads. It is long sleeved, it has a draw cord for the neck. It has camouflaged pads on the elbows. 3. Shirt - T-shirt, camouflaged, short sleeved. Khaki trims on neck and arms, Size L. 4. Shirt - T-shirt, camouflaged, short sleeved. Khaki trims on neck and arms, Size M.2. Written on label is name "Vaughan".uniforms, aust. army, passchendaele barracks trust

Inside of shoulder strap; 53120 GLENN R.E. 1, Blue enameled water bottle, sealed with a metal top cork attached to the bottle by a cord. 2. Leather water bottle harness and over the shoulder carry strap.1. Water bottle cork, “RIDER & BELL SYDNEY” 2. Bottle harness; “53120, D^D KH 1942 G^” Inside shoulder strap; “53120 GLENN R.E”passchendaele barracks trust, water bottle, blue, enamel

Uniform re W.O 1 Graham Wybar Royal Australian Army Ordnance Corp. .1) Shirt short sleeve khaki colour complete with shoulder Corp badges “RAAOC” crown on upper arm denoting W.O 1 class, long service ribbon. .2) Trousers, polyester khaki. .3) Belt nylon webbing khaki colour with silver colour buckle .4) Lanyard nylon red cord.uniforms - army, raaoc

Summer dress uniform worn with black shoes and long socks. Items in collection re T. Pattison, refer Cat No 5342.4..1) Shirt and lanyard, polyester light khaki colour with purple cord lanyard, WO2 insignia on upper sleeves, on each shoulder epaulettte “RASVY” badges .2) Shorts polyester light khaki colour .3) Belt, webbing light khaki colour with black buckles.uniforms-army, polyesters, summer dress

A complete replica uniform set of clothing and all items that were or could be worn by a first AIF soldier.Light horse brigade .1) Jacket, 100% wool with cotton lining. 7th Battalion AIF colour patches with a brass A signifying original ANZAC on both sleeves. Right sleeve has sergeant's stripes & 5 blue & 1 red chevron stripes. Left sleeve has 3 brass bars re WIA 3 times. Rising Sun badges on each collar & Australia badges on shoulder straps. Belted at waist. .2) Jodphurs, khaki corded wool. Brass button up fly. .3) Braces, red, white & blue oblique striped. .4) Hat, size 57, khaki Akubra with felt pugaree, leather chin strap, & blackened brass Rising Sun badge on upturned rim. .5) & .6) Puttees, pair, khaki wool felt with khaki cotton tapes. .7) & .8) Boots, pair, size L, tan coloured leather with dark brown leather laces, leather soles with metal reinforcing on heels..1) & .2) Makers labels. .4) Hat: Akubra, Made in Australia; On badge: Australian Commonwealth Military Forces. on hat: "5.7 Akubra Made in Australia"uniforms-army, costume - male footwear, costume - male headwear

19 black / white photos, head & shoulder portraits of soldiers from WWI in the Fleurbaix - Fromelles area. There is a list in the centre of background of 3 soldiers whose photos are not present. Photos are mounted on a white background with glass front, white plastic coated frame, fawn cardboard backing with black cord hanging strap attached to back.photographs, framed, fromelles

Items belonged to Alfred Edward Boland, V59811, VX120170. Refer 2473 for service history.Cardboard with purple felt covering with the following mounted on for display re A.E Boland. 1. Set of Identity Discs, one round, one eight sided with cord attached. 2. Returned from Active Service Badge. 3. Rising Sun lapel badge, blackened brass. 4. Two x "Australia" shoulder badges, blackened brass. 5. Three x Officer shoulder rank Insignia, blackened brass."VX120107 CE BOLAND AE" (On the ID discs)badges, identity, military

DALE HANNAFORD 8435318 Served Afghanistan 2011 Refer Cat No’s 2508, 2509.2 .1) Boot, high sided, left foot, leather, fawn colour, metal eyelets. Padded on the inside, rubber sole, cord lace. .2) Same as .1) above. .3) Hat, floppy with firm front peak, cotton, camouflaged desert pattern. Top of the hat flows down to the shoulder for all round protection. Has elastic headband & valcro strips on the sides..1) & .2) 280/100 [up arrow] MONDO POINTuniforms - army, costume-male footwear, uniforms - headwear, trades - bootmaking