During the 1950’s, the growing threat from Submarines, led the Royal Australian Navy to consider a quick reaction, long range ASW torpedo delivery system as an alternative to the USN’s ASROC and the RN’s Match. Full scale research and development began in 1960 using the Turana target drone as the basis for the delivery platform. Shipboard tests began in 1963 and the Government Aircraft Factory (GAF) began production of three variants M3, M4 and M5 in 1965. The M4 variant had a guidance system designed to interface to a full tactical data handling system while the M3 and M5 variants used a simpler system with a dedicated fire control system. The IKARA is an unmanned miniature aircraft with clip on upper and lower stabilizers and wings. The upper stabilizer (SVU) housed and electronic package that transmitted flight data back to the launch platform and received updated target acquisition data during flight. Flight maneuverability was provided by elevons fitted into the trailing edge of each wing, these were operated by an actuator system that received flight correction data transmitted to the autopilot from the fire control system. The payload, either the Mk44 or Mk46 lightweight torpedo was suspended to the underside of the airframe and faired into the body to provide and aerodynamic shape. The forward section of the body housed the autopilot and the thermal battery unit. Propulsion was provided by the MURAWA steel cased, solid propellant rocket motor with a combined boost and sustainer stage. IKARA was capable of engaging a target to the maximum range of the ships sonar, regardless of weather conditions. Target information is fed into the fire control system, which calculated to drop zone for the torpedo taking into account speed and direction of launch platform and target, win speed etc, then tracking the missile to the drop zone where command signals initiate torpedo release. The IKARA is an unmanned miniature aircraft with clip on upper and lower stabilizers and wings. navy, torpedo, rocket, submarine, missile

None,Situated out side of the Civic the geometric abstract design suggests a stable, consistent, reliable yet diverse place, policies council supports. Public Art MosaicHelen Bodycomb; Art Loop Square Ceramic mosaic set into footpath with blue ground and yellow and white abstract designabstract design, structure, design, stability, diversity

This "art deco" style of containers were very popular by the "art and trendy" socialites, be they in the city or in rural towns and properties. This style was very popular in the 1940's to 1950's. The octagonal shape provided the stability of the decanter with its "expensive" contents. Because of its style it blended in well with any lavish meal and socio economic "upper" class environment. It was a part of social atmosphere of elegance and wealth be it in the city or on a rural property. This is very significant to the Kiewa Valley rural "society" environment. At the time of its use the wealth of Australia was "riding on the sheep's back", that is rural income(primary producers), on the whole, was well above that in the cities (industrial). It was in a period where large wealthy property owners could spend lavishly on trendy domestic items.This octagonal glass decanter with its egg shaped stopper is made in an "art deco" style and reflects the 1950's style of bold design. The decanter "stopper" has been cut in a "diamond" cut to reflect the sunlight as does a diamond ring. The stopper is tapered down to permit easy placement and removal. The Stability of the decanter is increased by the broad base and octagonal (8) sides tapering going up the sides.decanter, glass, art deco glass ware, spirits container

Used in Pacific War during WWIIBlack covered Electro Mechanical analogue computer with small indicator dials with two divisional connected boxes. Mounts on Minneapolis Honeywell 'stabilizer' unit.Minneapolis Type G1029 A3CAZ HZ 26 Volts DC CV. Serial No. C-24825 B3430

The Phoebus is a fibreglass composite sailplane that was designed by H. Nagele, R. Linder and R. Eppler in the early 1960s for competition flying. It is a derivative from the Akaflieg Stuttart Phonix which was the first sailplane to be built of fibreglass. The first Phoebus, a Standard Class design with a 15 metre wingspan, flew in 1964. The Phoebus C is the open class version of the type that was introduced in 1967. It has a 17 metre wing span, retractable wheel and tail brake parachute. Several hundred Phoebus sailplanes (all versions) were made by the manufacturer Bolkow at Ottobrun in Germany before production ended in 1970. The Museum’s Phoebus C, serial number 866, was built in 1969. It was donated to the Museum by Ian Cohn in 2008. Early fibreglass design that was manufactured in numbers. The Phoebus is a modern looking single seat glass fibre sailplane with a ‘T’ tailplane. It is finished in white with light red detailing including thin red stripe on wings and some red striping on fuselage sides from nose to underneath wings.Serial number 866 on plate affixed inside cockpit – registration VH-GSW which has been painted on the sides of the fuselage rear of the wings. A Freistaat Bayern crest has been applied to each side of the vertical stabilizer. australian gliding, glider, sailplane, bolkow, phoebus, cohn, nagele, linder, eppler

Otto Schott, a chemist and glass engineer, had the vision of uniform production ie making glass items that would resemble one another. At the end of the eighteenth century, with most glass items still created by hand, the quality of output was still a guessing game. Schott was the first to render this an industrial certainty. 1884 Otto Schott, Ernst Abbe and Carl and Roderich Zeiss found the Schott & Associates Glass Technology Laboratory in Jena, Germany. Glastechnisches Laboratorium Schott & Gen was born. Production started in 1886. The following year, a crucial discovery was made: borosilicate, a heat and chemically resistant glass.By it’s 25th year anniversary, the company had grown from an experimental glass factory into an internationally renowned manufacturer of optical and industrial glasses. Soon to be added was fiolax, tube-shaped glass used for vials, ampoules and syringes thus allowing the company to play a significant role in supplying Europe's nascent pharmaceutical industry. During WW2 Company was taken over for military use, and in 1945 given to the Russians as East Germany - GDR. , US troops transfer the "brain trust" of Jenaer Glas to Mainz in West and In Jena , East Germany, in 1948 the company became a state-owned "property of the people." The West German company becomes Schott Glaswerk, while the people in Jena, GDR, shorten their name to Jenaer Glaswerk. When the Berlin Wall comes down in 1989 Germany is united once again and in 1991 the company is joined and the Jena factory is brought up-to-date by 1994.This 10ml clear glass, graduated cylinder for laboratory tests, set in a plastic pentagonal base, is made of borosilicate glass. It has a pouring lip. The wide pentagonal shaped base provides stability and makes the cylinder roll-resistant. agr / ? TRS 10/0.1 / B Tol + - 0.1 / ml in 20'C / GDR pharmacy, medications, medicines, glass manufacturing, glass works, early settlers, moorabbin, bentleigh, cheltenham, jenaer glaswerk schott & gen company, west germany, east germany, berlin wall, ww2 1939-45, schott otto, zeiss roderich, borosilicate glass, glass cylinders, laboratory glass

The family of Miss Carol Pedersen-Green migrated to Australia from Norway c1900 and probably brought this desk set with them. A desk set comprising a wooden base with 2 cut outs for 2 clear glass ink wells with silver hinged lids. A ledge on either side to hold pens. and 4 rubber stops under base to maintain stability 5 wooden pens with steel nibs writig equipment, pens, glass inkwells, pederson-green carole, cheltenham, moorabbin, bentleigh, early settlers

Document. Owner / Tenant Licence No 4488 to Grow Wheat for season 1947/48 issued to James Leslie & Hugh Campbell Ennis of Buckrabanyule. 140 acres wheat, 10 acres for hay or grazing. Dated 30th April 1947 issued by Wheat Industry Stabilization Board. Reverse outlines conditions of licence and appeals process.

Mark FELTHAM (1976- ) Born Melbourne, Australia Mark Feltham was a third year student at the University of Ballarat in 1997 when this work was produced. This item is part of the Federation University Art Collection. The Art Collection features over 1000 works and was listed as a 'Ballarat Treasure' in 2007. Artist's Statement: Algorithm, meaning a method for reaching a solution. This piece is about reaching stability in life which is brought about through the attainment of knowledge, having clear aims and goals, being able to express oneself and trying to keep a balance between the good and the bad. art, artwork, mark feltham, sculpture, alumni

The decorative elements of this carpet/rug symbolises Australia's commitment to Operation Catalyst - a post-invasion operation dedicated to the stabilization, rehabilitation and reconstruction of Iraq Teal green, grey and gold carpet with two small flags of Australia and Iraq at top, cross swords above a circle above a kangaroo and a camel. Carpet attached to timber at either endOperation Catalyst 2006 IRAQ 2006operation catalyst, iraq, 2006

A variety of badges that once belonged to J B McLean some are souvenirs and a couple are from the A.I.F. The badges for those returned from active service could be worn by soldiers and nurses who returned to Australia from active service and were honourably discharged. From information found online: The badge from Ypres is known as a sweetheart badge. Often produced post war as a souvenir. It is the arms of the city of Ypres/Ieper. The crown over the shield is called a "mural crown" and is often seen as part of the arms of cities and towns. The phrase 'sweetheart brooch' is commonly used, but is misleading, as it was not only 'sweethearts' that wore them. These were with other World War 1 memorabilia that has come from Private John Basil McLean, 2nd Reinforcements, 37th Battalion, A.I.F. J.B. McLean (Service No. 13824) was from near Maffra, Victoria and enlisted on 22 January 1916. He embarked on 16 December 1916 for Europe. He spent time with the Australian Field Artillery (Pack Section). At the end of the war he worked for a year at the A.I.F. Headquarters in London before returning to Australia on the 'Ceramic', arriving in Portsea in 1920. His full war record is available from the National Archives of Australia (B2455, MCLEAN JBM).This is an example of badges held by an ex soldier.Seven assorted badges collected by J B McLean. Two returned from active service AIF badges. A kangaroo badge on a blue enamel circle with the word ANZAC. Badge with the arms of Ypres surmounted by a crown. A pin with a field canon and a motto in latin. A pin with the Australian coat of arms from HMAS Australia sailing in the Great Fleet in 1916. A medallion with the Australian naval flag and the Union Jack.01122.1 On the front 'Issued by Dept of Defence. Returned from Active Service. Australian Military Forces. A.I.F.'. On the reverse '188589 Stokes and Sons Melb' 01122.2 'ANZAC' written in silver, on the reverse 'AJC Sterling' 01122.3 'Ypres' 01122.4 A latin phrase: 'Ubique constru stabiles Australia'. It could translate as 'everywhere together and trust'. 01122.5 On the front 'Grand Fleet. H.M.A.S. Australia 1916' 01122.6 On the front 'Issued by Dept of Defence. Returned from Active Service. Australian Military Forces. A.I.F.' On the reverse '117083 ? Perth' 01122.7 on the reverse 'Imitation'.world war one, soldier

Collection of 4 photos of Mullum Mullum Creek Improvement Works. Sign on wire fence: "Mullum Mullum Creek Improvement Works Stage 1", "This work consists of rock lining the creek banks and the construction of small rock weirs. The work will stabilize and control erosion". Estimated Cost $250,000. Undated, but phone number does not have "9" prefix. Possibly early-mid 1980's?(Photo V0174 is a duplicate of V0173 and was not scanned. There is no photo V0172)Nothing written on photograph.

A tool such as this one would have been used by many householders in the past and those using guns in their occupations or hobbies – shooters, farmers, policemen etc. This item is retained as an example of a tool used in the past to re-load shot guns.This is a metal tool, with part of it painted green and containing a brass section. The top part of the tool has a round hollow section open at one end. The tool has a handle at one end (made of composite material) and a wing nut screw in the lower middle section. This enables the tool to be attached to a bench for stability. At the other end is a tapering piece of metal with a sharp end. This mechanism is attached with a screw and is able to be moved so that a section of it touches the open end of the hollow part on the top. vintage tools

This blacksmith’s drawer cabinet once belonged to Goodall and Sons, who were blacksmiths in Terang. The drilled holes in the drawers may have once had knotted rope handles. Some of the drawer fronts have been split, on broken, in the area of the holes, indicating that they drawers have had heavy use. The stencilled numbers could have been used for sorting different blacksmith items such as tools, scraps of materials, fasteners and horse shoes. The smith was called upon to do a variety of work. In the early 1900s he was often the nearest person to be able to perform an engineer’s services for many miles around. HENRY GOODALL & SONS Henry Goodall (1870-1936) was proprietor of garages as H. Goodall & Sons Pty. Ltd., at both Terang (McKinnon and High Streets) and Mortlake (Dunlop Street). His business was in operation in at least in 1916 and perhaps well before, considering the date of the tyre bender and its use for wagons with wooden wheels. It was still in operation in 1953, chasing up debtors in Mount Gambier Court. Amongst the employees of H. Goodall & Sons Pty. Ltd. was Ernie Entwistle, a blacksmith (a soldier who died in 1916 ) and Alfred Hodgetts, radio expert (killed in a fatal accident in 1943, when he was in his early 30s ). Henry Goodall was involved in the community as a Justice of Peace, a deputy coroner, President of the Mortlake Hospital, trustee of the Soldiers’ Memorial Hall, and as a prominent Freemason. He and his wife had two sons (Charles and John) and one daughter (Mrs. Chas. Newton, of Skipton). The drawer cabinet is locally significant as it was used by a local company in Terang and Mortlake in their blacksmith, wheelwright and garage business. It is an example of the furniture of the blacksmiths’ trade in Victoria in the early to mid-1900sBlacksmith's drawer cabinet with 8 compartments and 7 drawers (the 8th drawer is missing). The drawers each have two drilled holes. Both top and base of the cupboard extend past the sides, the base further than the top to give it stability. The cupboard once belonged to Harry Goodall & Sons, blacksmiths of Terang. Dated early to mid-1900s.Stencil or hand painted on drawers “5” “3” “12” “11” “4” “4P”flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, h. goodall & sons of terang, terang blacksmith, h. goodall & sons pty ltd, mortlake, ernie entwistle blacksmith, alfred hodgetts radio expert, charles goodall, john goodall, mrs. chas. newton nee goodall, terang 1900s, warrnambool district 1900s, box cupboard, drawer cabinet, drawer storage unit, blacksmith’s furniture

Document. Owner /Tenant licence No 1589 issued by the Victorian Wheat industry Stabilization Board to James Leslie & Hugh Campbell Ennis of Buckrabanyule dated April 7th 1948. Licensed to grow wheat for the 1948/49 season. Wheat 260 acres, 10 acres for hay or grazing. On reverse conditions applying to licence outlined along with appeals process.

Candle stick manufacturing moulds were extensively used throughout the Kiewa Valley and its regions to provide rural homes and businesses with illumination during times of limited light e.g. night time. These candles were used before the Kiewa Valley was placed of the electrical grid. The candles were made from parrafin wax. Before the 1920"s electricity was in limited supply due to the inability of the private electricity suppliers to service isolated rural regions. It was not until the Victorian State Government passed legislation (1920) to improve electricity supplies by forming the State Electricity Commission of Victoria (S.E.C.V.) Isolated rural communities could not meet the higher costs to have electricity supplies connected and therefore it was not until the 1950's that adequate domestic electrical power could be supplied.The isolation that the Kiewa Valley provided was of a greater hindrance to any utility (power,roads & telephone) where the cost per instillation was beyond the rural population's ability to pay either directly or indirectly. One of the benefits that the "closed" community of Mount Beauty had, when it was administered by the SECV was that some utility costs were a lot lower than that of the other settlements in the Kiewa Valley. This disparity led to a conference in 1928 of the rural and regional councils to demand from the Government an equality of electricity tariffs. This equality did not take place until 1965. The demand and usage of cheaper and affordable lighting that wax candles provided was for some rural families a way of life until the mid 1900's.This candle making mould is made from mild rolled sheet steel(tin). The top basin is rectangular in shape with beveled edges(facing in on all sides. There are six holes in the top basin for vertical hollow tubes to feed off. The six tapered cyclindrical tubes running from the top basin to the bottom raised platform base. All connections are welded together. The bottom of each cylinder has an opening for the candle wick. The wick is positioned in place before the molten wax is poured into the cylinders. A positioning ring has been welded to one bottom ring for stability.parrafin wax, candles, domestic household ighting

There are many ways of travelling over snow - skis, toboggans, sleds, using snow shoes, machines, horses etc. This 'snow scooter' appears to have been handmade for faster transport (than walking) over snow. Machines with engines 'snow mobiles' are more commonly used nowadays. This snow scooter was possibly used at Falls Creek for moving around the village during winter.Wooden plank curved and lifting at the front and at the end of the back an attached small rectangular wooden framed plastic grid (for non slippery foothold). Underneath plank - at front is a metal rudder that swivels when the handle is turned and at the back are 2 metal fixed 'rudders'.At the front, on top, is a metal stand forming a triangle (for stability) with a steel rod which goes through the plank to the front rudder and up to a bicycle type handle at the top. The handle has red plastic handle grips on the ends. The join of the metal bars half way up is with a butterfly nut. snow scooter; snow transport; falls creek

A brown fabric hard cover book. Title is engraved with gilt letters on front cover and on spine. and gilt circular decoration on cover written on it 'Institution of Naval Architects. Founded-AD - 1860'. Volume XLIX, 334 p. and a number of folding plates. Illustrations in b/w. It includes a table of contents. Frontis picture of 'Sir Edward J. Reed, K.C.B., F.R.S. Honorary vice president who died in 1906'. This book Features, "Merchant Shipping and World Commerce in Relation to Sea-Power, Experiments on Mercantile Ship Models in Waves, Three Steps in Naval Construction, The Tendency of Warship Design as Affected by the War, Stability of Large Ships, Proportions and Block Coefficients of Merchant Steamers", ect. naval architecture, institution of naval architects, r w dana, s j p thearle, sir edward j reed

A tape made of Frank Meldrum & Frank Doolan in October 1973. 1973 was Legacy's 50th Anniversary. The tape has not been played but could be an attempt to record the history of Legacy.A record that Frank Meldrum and Frank Doolan prepared a tape during Legacy's 50th Anniversary year.A tape recording on a plastic spool in a red cardboard box.Top of box, white print RCA, black print Magnetic Tape, For your recorder. Sticker in bottom RH corner, recording tape/ long play/extra strength an stability/ splice free/ 1800Ft/7'' reel/type 10M18. Red Seal/1800 Feet/1.0 Mil Polyester/7" Reel/ Type 10M18/Red Seal 1.0 Mil Polyester. Side in black texta 'Frank Meldrum & Frank Doolan 2/10/73'. Bottom of box written in blue biro, 'Legatees Frank Meldrum & Frank Doolan at Melbourne 2nd & 9th October 1973'. Spool, RCA, Speed 7 1/2" p.s., Legatee Frank Meldrum&Frank Doolan at Melbourne October 1973.golden jubilee, legatee, history

Unknown. Photo TBA. The tape has not been played. This record could be a duplication of the tape stored at 00293 - sample photo attached. Also to be checked is that the date 2nd and 9th October 1973 is during the 50th Anniversary conference held in Melbourne.A record that part of the 50th anniversary conference was recorded for future reference.An audio recording on a clear plastic spool in a red square box with the brand RCA. Yellow & white adhesive label bottom right hand corner. Front cover, RCA in white print, magneic tape, for your recorder in black print, Master tape handwritten in black felt tipped pen. Adhesive label, Recording tape long play Extra strength & stability Splice free 1800Ft. 7" reel Type 10M 18, all in black type on yellow background. Red seal 1800feet 1.0 Mil polyester 7" reel TYpe 10M18 Red seal 1.0 Mil Polyester, all on white background. Inside front cover black type on white background. Rear cover, Black print on white background. L/TEES DOOLAN/MELDRUM 1973 handwritten in blue felt tipped pen. Spool. clearplastic, RCA stamp, made in USA, Legatees Frank Meldrum Frank Doolan October 1973, speed 7 1/2" p.s. in black type on paper adhered to spool. Magnetic tape, bron with white leader.legatee, frank doolan, conference, 50th anniversary