Ballarat School of Mine had a boot making department. This one of the tools that would have been usedBlade tool - wooden handles and brass blade section"EDMUNDSON - LANCASTER" engraved on blade section "LEITCH" on both wooden handles tool, leather, boot making, ballarat school of mines, skiver, edmundson, lancaster

Danks Catalogue - Tool Section of General Catalogue Joseph Dixon - Standard Tools for Saddlers, Leather and Plastic workers Reprinted via courtesy of The Hand Tool Preservation Association of Australia Inc.Red book with black writing. Danks Catalogue - Tool Section of General Catalogue John Danks & Son Pty Ltd, 391-403 Bourke Street, Melbourne Telephone m2381 (12 lines) and at 3211-330 Pitt Street, Sydney With picture of building with John Danks on front. Enclosed is a small booklet 'The Joseph Dixon Tool Co. Ltd Standard Tools for saddlers, leather & plastic workersAs abovejohn danks & son p/l, tools, the joseph dixon tool co. ltd.

Roads and paths throughout Burnley were concreted and this tool was used to shape the curbsCurved shaped metal tool with handle to create the shape of curbs in wet concrete.DVFconstruction, burnley campus, paths curbs, curbs, curb tool, artifact

Catalogue - prepared for J. Buck. Established 1759 Hand Tool Preservation Association of Australia Inc. Tools and Machines for Engineers and Woodworkers.Grey heavy Paper cover Black writing and border Catalogue of Tools and Machines 248 pages - Measurements, prices and catalogue Nos of Tools Printed in 1913 - supplied by Frank Ham, HT-PAA Printed in August 2003 by Hand Tools Preservation Association of Australia Incj. buck - established 1759, tools and machines for engineers and woodworkers

Plane tools for shaving wood date back to Roman times and are still in use today. This item is a vintage tool and could have been used in households or in businesses.This item has no known local provenance but is retained because of its age and interest as a hand tool from the past.This is a metal plane tool with an adjustable blade at the base and two screws for adjustment. The metal is much rusted.No. 113household tools, history of warrnambool, vintage tools

This tool belonged to Ernest Brighton Phillips, a Warrnambool furniture maker. Ernest Phillips (1875-1924) was born in Warrnambool and learnt his carpentry trade at the Warrnambool Box Works. In the late 1890s Phillips established a furniture store at the corner of Liebig and Koroit streets and by the early 20th century he had the largest furniture warehouse and factory in Victoria outside of Melbourne. His products were sold all over Australia. Phillips and his family lived at ‘Heatherlie’ in Koroit Street. Today this property is the site of the residential complex for senior citizens known as ‘Heatherlie’. This tool is of considerable interest as it belonged to Ernest Phillips, a prominent businessman in Warrnambool at the end of the 19th century and the beginning of the 20th century. It is also of interest as a good example of a tool that was in use 100 years ago. This is a small tool with a wooden handle. The top part of the handle that screws in is missing. The tool is attached to the handle by a brass ring and a screw and the tool itself is a thin nail-like piece of metal with a small metal piece at the end in the shape of a star with six points. This end piece gouges out a hole or a pattern in wood or other hard material. The tool belonged to Ernest Phillips and his name is stamped on the handle. Three oblong-shaped metal nails were also with this tool but were not necessarily used with it. ‘E. Phillips’ernest phillips, history of warrnambool

Thomas McPherson & Sons Catalogue Woodworkers' Tools and Associated Trades Catalogue from 1909 - Kees Klep Printed by Allan MorrisonCatalogue- tools and prices Thomas McPherson & Son - established 1860 Green cover, bound by black spiral Catalogue No 10.Twoodworkers tool, prices, description

This tenon saw was used in the making of components for the ship model Sovereign of the Seas. Tenon saws are often used for making dovetail joints. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This tenon saw is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This tenon saw was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Tenon Saw. Hand saw with small-toothed metal blade set into a slotted brass back, attached to a round brass fitting in the light coloured, turned wooden handle. Top on handle is marked with seven concentric rings scored into the wood. On top of blade is maker’s name “AVIA” within oval ring. This tenon saw is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”."Avia" within oval ring.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, saw, wood cutting tool, tenon saw, avia steel and tool company limited, carpenter's tool, tool, sovereign of the sea, ship model, hobby, ship model tool

Black box containing a Matrix Braille writing machine, with a paper spool attached to the feeding mechanism. The front portion of box is hinged and lifts up to reveal keyboard. Top half of box lifts to reveal Braille writer which is bolted to a wooden base that can be lifted out. The base is secured with a metal latch. Machine has black keys and the wooden case has black leather-like covering, hinged lid, metal clasps, and leather handle on the side. "Model G, Matrix, Coventry Gauge & Tool Company, Ltd., No. 792, For The Royal National Institute for the Blind, London W.I." is stamped on the front,Black vinyl-covered case containing black metal writer and paper spool"Model G, Matrix, Coventry Gauge & Tool Company, Ltd., No. 792, For The Royal National Institute for the Blind, London W.I." is stamped on the front.braille equipment, royal national institute for the blind

Black box containing a Matrix Braille writing machine, with a 24mm-wide paper spool attached to the feeding mechanism. Corner of box is hinged and lifts up to reveal keyboard. Top half of box lifts to reveal Braille writer which is bolted to a wooden base that can be lifted out. The base is secured with a metal latch. Machine has black Bakelite keys with rubber pads beneath make this a "silent" machine; wooden case has black leather-like covering, hinged lid, metal clasps, and leather handle on the side. "Model G, Matrix, Coventry Gauge & Tool Company, Ltd., No. 1183, For The Royal National Institute for the Blind, London W.I." is stamped on the front,Black vinyl-covered case containing black metal writer and paper spool"Model G, Matrix, Coventry Gauge & Tool Company, Ltd., No. 1183, For The Royal National Institute for the Blind, London W.I." is stamped on the front.braille equipment, royal national institute for the blind

This item is from a collection donated by descendants of John Francis Turner of Wodonga. Mr. Turner was born on 6 June 1885. He completed all of his schooling at Scotts Boarding School in Albury, New South Wales. On leaving school, he was employed at Dalgety’s, Albury as an auctioneer. In 1924 John was promoted to Manager of the Wodonga Branch of Dalgety’s. On 15/03/1900 he married Beatrice Neal (born 7/12/1887 and died 7/2/1953) from Collingwood, Victoria. They had 4 daughters – Francis (Nancy), Heather, Jessie and Mary. In 1920, the family moved From Albury to Wodonga, purchasing their family home “Locherbie” at 169 High Street, Wodonga. "Locherbie" still stands in Wodonga in 2022. The collection contains items used by the Turner family during their life in Wodonga. These tool kits were often carried by men so they were equipped to deal with minor repair jobs away from home. A variety of companies in Britain and Germany manufactured similar kits prior to WW2.A metal miniature tool kit including a screwdriver, an awl and 2 augers stored in a metal cylinder. The cylinder screws together in the centre. There is a central slot on each side of the cylinder sot that the end of each tool can be inserted. The cylinder then screws together to act as a handle.pocket tool kits, hand tools

Catalogue of Tools and Machines for Engineers and Woodworkers. Book describes tools, with components and measurements for various parts. This catalogue is a reprint by HTPAA (Hand Tool Preservation Association of Australia Inc) from the original catalogue produced by J. Buck 56 Holborn Viaduct E. C. which was established 1750.J. Buck 56 Holborn Viaduct E. C. tools & machines, j. buck, engineers & woodworkers

Stone grinding/sharpening tool with 'bump' which could be used as a handle. Evidence of wear due to sharpening on both sides of the stone. The rock is calcite cemented quartz sandstone; it is sedimentary quartzite with a granular appearance. It has a soft matrix, and is pale, indicating its calcite nature, as well as dissolved pits. Its origin is from dry land soils and dunes. aboriginal, stone, tool, archaeology, stone tools, sandstone, quartzite, calcite

Black and brass features, metal barrel and thimble. Housed in Black plastic box with blue interior and brass clip. The Precision Tool and Instrument Co Ltd, Surrey, England on the eyepiece. On the top of the box is inscribed The Precision Tool and Istrument Co Ltd, Thornton Heath, Surrey, Eng. On the box is a black label with white writing "Micrometer Eyepiece".micrometer eyepiece, eyepiece, micrometer, the precision tools and instrument co ltd

The first bicycles arrived in Australia in the 1860s. They gradually gained in popularity and by the 1890s they offered a cheap and relatively comfortable mode of transport. Far being just a means of leisure, long distance cycle travelling became a fact of life in rural areas for people such as sheep shearers and other agricultural labourers with migratory work. The bicycle and swag travelled much of Australia on dusty dirt tracks, long before the automobile was introduced. Today the bicycle continues to be an important item for general, cheap transport, sport and leisure. Tool kits such as those shown in the item, were and important piece of equipment for bicycle enthusiasts, particularly on a longer ride where assistance may not be close by if the rider experienced a punctured tyre. John Bull Rubber Co. Ltd. was a British tyre manufacturer based in Leicester. It was established in 1906 and was originally named Leicester Rubber Company. In 1915, a new factory was built in Evington Valley Road as indicated on the repair outfit tin in this kit. It was renamed John Bull Rubber in 1934 after its popular product of the same name. In 1958, the company was acquired by Dunlop Rubber. A leather bag containing tools and 2 tins containing rubber patches to repair bicycle tyres. The bag has 2 straps and metal buckles to attach it to the back of the bicycle seat.On tin 1: "The John Bull / Repair Outfit/ John Bull Rubber Co. Ltd./ Evington Valley Mills, Leicester" On tin 2: "ZENITH Repair Outfit / For Cycle and Rubber Repairs/ Self Vulcanizing" On tin 3: Around the DUNLOP logo "Six Self Lighting/ Patch Heat Units / For Cycle Tube/ Vulcaniser"bicycle history, bicycle repairs, john bull rubber, cycling leisure

This plane tool is believed to have belonged to a Warrnambool carpenter, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849 and lived for some time in Port Fairy. In 1865 he formed a partnership in Warrnambool with Christopher Beattie and established the undertaking business of Beattie and Phillips. This business continued on after the deaths of the founding partners, Beattie and Phillips and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics’ Institute.This tool is of interest, firstly as an example of a 19th century carpenter’s tool and secondly as a memento of the 19th century Warrnambool businessman, Henry Phillips. This is a wooden plane tool with a boat-shaped body curved at the sides and a wooden piece inserted in a top opening. This wooden piece holds a metal blade which protrudes at a slit opening in the base of the body. The straight-edged metal blade and the wooden piece are held together by a metal screw. vintage tools, henry phillips

Tool used for bleeding horses for testing.Folding metal Veterinary tool, used for bleeding horses for testing.Joseph Roger & Sonsveterinary equipment

Typed list on quarto paper, carbon copy, titled "Crossley Tool Kit", detailing all the tools and parts supplied with all cars, including instruction books. Dated in the bottom left hand corner 6/5/20. Presumed a list that supplied with a car for Mr Cameron.trams, tramways, chairman, motor vehicles, lists

This item wasused before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength. This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) within the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools was and still is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron, hand operated Auger has a short barrel shaped cylinder at one end (known as the "Eye") and at the other end a Helical screw blade (screws the cutting edge into wooden material, thereby creating a hole 3/4 inch diameter in the wood) . The barrel section at the top permits a metal or wooden leverage plank to be inserted. The main rod has a 180mm long cutting/screw blade running from the bottom up towards the "eye" end. From the end of the screw blade to the handle is 380mm and cylindrical, but this changes at 550mm from the "eye" end to a 14mm x 10mm rectangular shape shaft.This shaft end is welded to the "Eye".On the shaft below the "eye" is stamped " MATHESON GLASGOW" on the front side and a spade (cards) symbol on the back.auger, hand drill, fencing, tool, rural trades, brace & bit

Silcrete and chert can create sharp flakes and have been important materials for stone tool making in Australia. Silcrete was commonly used and widespread. Heat treatment of silcrete made the rock easier to fashion into flakes.Partly worked, incomplete Aboriginal rock blanks. The collection includes rocks of silcrete, quartz, and chert. 8969.26 is quartz chert. 8969.37 is a flint stone with a vein of quartz. The dark brown rock is silcrete with more iron than others (possibly 8969.41). 8969.45 is Quartz. aboriginal, tool, blank, rock, scraper, aborigines, quartz, silcrete, chert, stone tools, quartzite, flaking, flake tools, archaeology

Moulding Plane: A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. Auburn Tool Company: The Auburn Tool Company is known to exist from 1864 to 1893. George Casey reorganized the firm of Casey, Clark and Company as a joint-stock company in 1864, under the company name of Auburn Tool Company. The 1865 New York State Census noted the firm as a manufacturer of the plane, plane irons, and skates. The production that year was listed as 30,000 pairs of skates and 35,000 planes along with 25,000 dozen plane irons. The plane irons carried the trademark "Thistle". Both skates and plane irons were made from welded wrought iron and cast steel. The Auburn Tool Company was among the five leading plane manufacturing firms existing in the mid to late 19th century USA. Others were: H. Chapin's Son; Greenfield Tool Company; and Sandusky Tool Company. Auburn Tool Company, with these others, was also a founding member of the Plane Makers Association, organized around 1858 to fix prices. Most of the companies tools were manufactured by prisoners and in 1866 the firm was outbid for prison labour by J M Easterly and Co. After losing the contract with the prison authority they constructed a new building and continued in the plane manufacturing business with private labour. The 1870 US Census reported the firm had 21 machines, driven by water power, employing 66 males, producing annual products valued at us$70, 000. After A. Howland and Company was dissolved in 1874, the Auburn Tool Company again resumed using contract labour at the State Prison until 1877. The Auburn Tool Company merged with the Ohio Tool Company of Columbus, Ohio, on Nov 14, 1893. Although plane manufacturing was continued at Auburn until after 1907, after this merger the firm went under the name of the Ohio Tool Company. A significant item from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture was made predominately by hand and with tools that were themselves hand made shows the craftsmanship used to make such a unique item. It also gives an insight into how many manufacturing companies bid for the rights to use prison labour to make their products at this time in our history. Decorative wood Moulding, plane Round type Auburn New York. Owner A Neudt Size 14 flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

DS,GS, and Depot Maintenance Manual including Repair Parts and Special Tool Lists for Corrector, CANT, XM4 and Gateway Army Ammunition Plant. These are held in a plastic bag.united states - armed forces - service manuals, special tools, tools, maintenance manual, us army

.1) Stove, cooking Gasoline, one burner, Model M-1950. .2) Spanner for above stove. .3) Tool for above stove. .4) Cardboard carton for above stove.domestic items-cooking, military equipment - army

Metal hand tool with a red wooden handle. Used as a scraping tool for different surfaces.hand tools, scrapers

Items in collection re Sgt James C WATT No 533, 24th BN, refer Cat No 3554.2 for his service history..1) & .2) Round, metal, button with imprint of Australia & crown on front. Attached ring on back. .1) Printed on back: “K C LUKE PTY LTD MELBOURNE” .2) Printed on back: “EMPIRE - TOOL SYD” .1) & .2) Embossed print around edge: “AUSTRALIAN MILITARY FORCES” uniform, buttons, army, amf

Caulking is the traditional technique used on wooden vessels built with butted or clinker-built planks to fill the gaps between these planks while still allowing the wood to flex and move. This involved driving the irons, hammered in with the mallet, deep into the seams to open them up. After this, spun yarn, oakum (hemp) or cotton was driven deep into the gaps. The hemp or cotton was soaked in creosote or pine tar to make the joins watertight. Caulking also played a structural role in tightening up the hull or deck by reducing the longitudinal movement of the neighbouring planks. William Marples junior joined his father's joinery making business in 1821. In 1860 William's sons joined him and the firm became William Marples and sons. Over the years they acquired John Moseley & Sons a London plane maker and Thomas Ibbotson & Co a Sheffield edge tool maker. Growing to become the most prolific and best known Sheffield tool maker. Their large factory was known as the Hibernia Works. Their trademark was a shamrock that appeared on some of their tools, in 1961 they had about 400 employees. In 1962 the record Tool Company and William Ridgway acquired a fifty percent interest in the company and in 1972 the companies merged with several others to form Ridgway Tools Ltd. After 116 years at its Hibernia Works, the company was moved to Dronfield. A 1982 takeover by A G Bahco of Sweden was short-lived and in 1985 Record Ridgway returned to British ownership first as Record Marples Woodworking Tools Ltd. In 1988 then as Record Holdings PLC in 1993. In 1998 the company accepted a bid from American Tool Corporation, subsequently trading as Record Irwin. The Irwin company itself was acquired by Newell Rubbermaid in 2002 and renamed Irwin Industrial Tool Co. Both the Marples and Record names were re-branded "Irwin" However the name has since been resurrected as Irwin/Marples and applied to wood chisels and table saw blades now made at their new facility in Udine, Italy. As a footnote, William Marples was the uncle of Robert Marples and Joseph Marples, both of whom established competing tool making businesses in Sheffield. The Robert Marples firm disappeared early in the 20th century. After several changes in the company's ownership tools are now made under the Ridgway name but in China. A tool made by a company with a long family history of tool making in Sheffield England, with a member of the Marples family, Joseph Marples establishing a competing tool company which continues today to manufacture quality products for the joinery and shipwrights trades.Caulking tool straight wide blade, Stamped "W Marples & Sons" & James S Steele tool box.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, caulking tool, caulking iron, james s steele