Specification document comprising printed cover, eight typewritten pages (black carbon copy) and two photo pages of a J.G. Brill Co. of Philadelphia PA, Birney Safety Car. Specification No. 100, revised 1/10/1919. On the printed cover, which has three holes for a clip on the left hand side, printed with the Birney Safety Car trade mark, the names of the J. G. Brill associated companies (American Car Company of St. Louis, G. C. Kuhlman Car Co. of Cleveland Ohio, and Wason Manufacturing Company of Springfield, Massachusetts). On the inside of the front cover and on the outer back cover is the Brill logo. On the inside of the back cover is a floor / seating plan of the Birney Safety Car, giving overall dimensions, location of equipment etc. Item secured with one brass clip in the top left hand corner. The eight typed pages details the specification of the construction of the tramcar, equipment details etc for a single truck, double end Birney Safety (tram) car. Gives dimensions of the tramcar, materials, construction methods, finishes, equipment, glass, etc. Also details additional items that could be ordered with the tramcar. First photo shows the Birney car without a trolley pole, lettered for the KC Rys. Co. The second photo shows an interior view of the tramcar. Scanned for COTMA Website - pdf version.trams, tramways, birney, j. c. brill co., tramcar specifications, tramcar construction

Set of two The J. G. Brill Company specifications for the "The Brill 77-E Truck" - four pages, printed on heavy semi gloss paper, giving an image of the truck or bogie, a photograph of a tramcar using them, details of the truck and its springing, dimensions, limitations, use and list of parts and their names. Has company details on the top of the Bulletin with international agencies listed - Noyes Brothers of Melbourne and Sydney and later on in Brisbane and R. W. Gardam of Perth. 745.1 - Bulletin No. 228 - dated 1917 - note spelling of Sydney as Sidney 745.1 - Bulletin No. 259 - dated 1922745.1 - has Noyes Bros. (Melbourne) Pty Ltd stamp on rear giving their address.trams, tramways, j c brill co, tramcar specifications, tramcar construction, 77e truck, trucks, bogies

Document produced by the Transit Research Corporation of New York, details the specifications for the Presidents Conference Committee (PCC) for a streetcar or tram for American cities. The MMTB researched this type of tramcar for use in Melbourne, taking out a licence for their production. This document dated 1/4/1947 with revision to 1/6/1950 would have been part of the licence agreement. Unfortunately, there were insufficient funds to build this type of tramcar. Only tram 980 which was based on a modified W6 class body was fitted with PCC equipment, later transferred to prototype PCC tram 101. See reference.Yields information about the technical specification for US PCC tramcars.Document - bound with card covers, approx 300 printed pages including folded drawings held by an Arnos type steel binding clip,On the spine with a green/white label "Specifications for PCC Car"tramways, tramcars, pcc, new trams, tramcar specifications

White folder with a "For Sale" sticker on the front containing the following documents/items" 1 - Business Cards for Daren Hutchesson and Len Millar 2 - Letter to Mike Ryan, Dept of Infrastructure forwarding the document and dated 8/12/2003 3 - CD with image of the tramcar and film of the tram in use. 4 - 13 full colour sheets providing details of the tramcar, specifications, floor plan, options, spare parts, details of Newstead Tramcars, History, terms of trade and photos of the rebuilding.trams, tramways, reports, newstead tramcars, x1 class, reconstruction, tram 466

Set of two pamphlets, A4 full colour reporting on the use of ASEA equipment in new trams for Melbourne. .1 - ASEA Pamphlet TB45-101E, Edition 1, June 1974 titled "Tramcars for Melbourne Australia", featuring a photo of 1041 (MMTB Photo) and an interior photo of the tram. The caption notes that there is no ASEA equipment on the tram. Describes the detail of the equipment to be supplied and some details of the tram and the Melbourne tramway system. .2 - ASEA Pamphlet 7967-28E Edition 2 titled "Tramcars for Melbourne" featuring a photo of Z1, possibly posed with a number of male passengers, showing route 88, City Spencer St. Gives details of the tramcar, specifications, notes differences between Gothenburg Tramways and Melbourne and that the trams are built by Commonwealth Engineering. Both documents printed in Sweden.trams, tramways, z class, new trams, 1041, asea, comeng, tram 1041, tram 1

Thirty two page book contained within a heavy card cover, saddle stapled. Printed on gloss paper with many black and white photos inside and colour cover. Book titled "Melbourne Tram Review" written by R.A. Birrell Details the formation of the MTA, The Met or the Metropolitan Transit Authority from the MMTB in 1983, the changing nature of the fleet, depots and allocations of tramcars, listing of tram classes, with various technical specifications, including tramcar numbers and photographs. For the B class, includes those which were not in service at the time of publication. Two separate allocation listings are given, the last one being that at 19/9/1988. Has contents pages, introduction by author and on rear cover, a listing of other publications produced by the publisher, Railmac. On the title page, (page 1) in green ink "Ex B.K."trams, tramways, melbourne, mta, metropolitan transit authority, tramways, tramcars

Yields information about the specifications of various combinations of controllers and motors.Report - set of three quarto sheets - drafts and completed documents, titled "Resistances - WH225, GE 201 motors, T1F, K36JR and B23D controllers", detailing the resistance steps, grid types and resistance. Compiled by Bob Prentice , dated 10/5/1973.trams, tramways, resistance grids, electrical equipment, electrical systems, tramcars, motors, controllers

Compiled and published by the Melbourne and Metropolitan Tramways Board, closing Monday 10 May 1977. Details the conditions of tender, conditions of contract, notes, specifications, gives background information about Melbourne, dimensions, performance, drivers and conductors, trucks, wheels, brakes, electrical equipment, control panels and drawings. The drawings give a map of the system, typical city route, Glenferrie Road route (grade diagram), concrete track construction, min. radius curves, loading gauge, all-electric tram and mounting details for the trolley base, schedule of prices, tender form, form of contract, and schedule of information to be provided by the tenderer. Includes an Alphabetical Index. Includes a drawing for a single-ended version of the tramcar. Became the Z3 class following the addition of a rear or 3rd door. Yields information about the 1977 tender for 100 electric tramcars that became the Melbourne Z3 class tram.Comb bound (white plastic) specification or tender document, approx 180 pages, with glossy card orange covers, titled "Tender Schedule for Electric Trams" and "Contract 3000". "1977" on front cover in ink.tramways, tramcars, z3 class, specification, tenders, mmtb, melbourne, single ended tramcars

Demonstrates the preparation of tramcar history and specifications to go with a photographic report.List - typed foolscap sheet titled SECV/Ballarat Branch ""To accompany photographic record of types of cars that have operated on the Ballarat Tramways system subsequent to horse-drawn trams." Lists car number, purchase date, truck type, body builder, seating capacity, HP and Make, Weight, miles in service in Ballarat, Truck builder and type and remarks. Lists cars 17, 19, 21, 22, 23, 26, 29, 30, 36, 40, old car 21, 23, 18 and 2. Not a complete list or of the cars in service.. Produced c1953?, as lists ex Adelaide 23 being retired in 1953 and for photograph captions. ballarat, tramcars, lists, secv, motors

Report - 6 foolscap sheets, stencil cut and duplicated titled "Class W7 Tramcars", giving a detailed written description of the trams (1001 to 1040). References a photograph which is not included. Gives notes on the General Design, body construction, windows, doors, finishes, seats, motorman's compartments, sound insulation, ventilation, lighting, signalling, destination signs, trucks, wheels, brake gear, motors, current collection control equipment and dimensions. Notes the Authority of the Chief Engineer Mr. D. H. Eakins.trams, tramways, w7 class, tramcars, preston workshops, tramcar construction, specification

Black and white photograph of MMTB SW6 850 probably soon after n. Side on photograph of tram. Destination City gives build date 1939 and notes that car was built with a tail light/s, which is visible at the right end of the tram. Has cropping marks in ink on right side of photograph. On rear is a type note (glued on sheet of paper) specifications of the tramcar and car dimensions. Destination City 5th edition gives a view of the tram - 3/4 front on showing the tail light arrangement - p41. Also on rear is "Sutcliffe Pty Ltd, Commercial Photographers 94 Elizabeth St. Melbourne, Cent 1500" stamp in light blue ink. and date stamp of print - "12 Jan 1946". See Destination City, 4th Edition and 5th edition.On rear in ink is notations "57", and measurement "4 9/16" with cropping mark.trams, tramways, mmtb, sw6 class, tram 850

.1 - Book - 20 pages + light grey cover, issued by the British Engineering Standards Association, British Standard Specification for "Cast Steel Wheel Centres for Electric Tramcars". Dated April 1922. Has standard Number 150-1922. Provides materials specification, testing and an index. .2 - Book - 16 pages + light grey cover, issued by the British Engineering Standards Association, British Standard Specification for "Wrought Iron Wheel Centres for Electric Tramcars". Dated April 1922. Has standard Number 149-1922. Provides materials specification, testing and an index. Both copies has the stamp of the "Tait Book Co. 90 William St. Melbourne" on the lower edge and in the top right corner, the ESCo Ballarat company stamp and the date "14 September 1923". trams, tramways, tramways, electrical equipment, wheels

Photocopy of a MMTB / MTA sheet giving the various glass sizes and specifications for W class trams only. Gives description, store schedule, metric and imperial size and tram type fitted to.trams, tramways, tramcars, specification

Specification or report - 6 A4 pages, photocopied titled "A class tram - Melbourne, Australia". Gives the detail of the tramcar, classification, developers (builders and suppliers), description, history, vehicle performance, dimensions, suspension, propulsion, braking, electrical and control systems and body specifications and a list of work done at Preston Workshops.trams, tramways, a class, commonwealth engineering, comeng, aeg, duwag, bogies, the met, new trams

Set of 8 A4 colour printed sheets giving the tram details and specifications and side elevation sketch for the W, Z1/2, Z3, A, B1/2,C, D1 and D2 class trams. Not printing date, but c2005. Features photos of trams1031, 30, 212, 284, 2010, 3026, 3513 and 5004. Document imaged as a pdf, though the first sheet miscoloured - see image i2.jpgtrams, tramways, yarra trams, tramcars, z class, a class, b class, c class, d class, tram 1031, tram 30, tram 212, tram 284, tram 2010, tram 3026, tram 3513, tram 5004

Report - typed carbon copy - 35 foolscap sheets bound within a brown card folder, drawings, charts, secured with fold back clips, with adhesive tape binding on the outside. Titled "Wheels - 28" Wrought Steel - 1948 Rolling - Contract No. 1380", dated 24 September 1951, prepared by the MMTB Testing Department, Report No. W4/1/287. Gives details of the extensive testing done on a batch of wheels rolled by Commonwealth Steel Company Newcastle, approx. 450 wheels had been ordered. Includes details of manufacture, testing, chemical analysis, dimensional check, hardness and service details. Has many appendices, giving details of the wheels.trams, tramways, preston workshops, reports, specification, wheels, tramcars

Report - typed carbon copy - about 60 foolscap sheets bound with black and white photographs of the testing equipment within a brown card folder, secured with fold back clips, with red adhesive tape binding on the outside. Titled "Noise Test - Tramcars and Tracks", dated 12/8/1957, prepared by the MMTB Testing Department, Report No. N1/1/88. Gives details of the testing methodology, where testing carried out, types of track construction and the results - concrete track noisier than sleeper construction - includes notes on "quiet" trams.trams, tramways, preston workshops, reports, specification, wheels, tramcars, track, noise

Report - typed carbon copy - 31 foolscap sheets with three graphs and drawings within a brown card folder bound with adhesive tape and fold back clips. Titled "Tramcar Sound Levels - External", dated 30/3/1950, prepared by the MMTB Testing Department, Report No. N1/1/38. Gives details of the purpose of the test, procedures, results, discussion and conclusions. Includes various classes of trams (including W3 and W4 class trams), appendices with sound levels, location plan for testing. Testing done on ballasted track in St Georges Road. Signed by D. H. Eakins. Two copies held.trams, tramways, preston workshops, reports, specification, wheels, tramcars, track, noise

Report - typed carbon copy - 13 foolscap sheets stapled within a brown card folder bound with red adhesive tape. Titled "Ropes - Trolley", dated October 1954 though has a date stamp on the first page of the report itself of 26/10/1955, prepared by the MMTB Testing Department, Report No. R7/1/43. Report looks at the insulation resistance offered by trolley ropes when dry and wet, new and used ropes and the possibility of causing electric shocks. Gives a reference to a previous August 1952 test. Undertook examination of the ropes, electrical measurements and electrical measurements of the human body. Has a number of appendices and details the test results.trams, tramways, preston workshops, reports, specification, tramcars, trolley poles, equipment

Report - typed copy - 14 foolscap sheets stapled in top left hand corner. Titled "Report on Road Tests on PCC and SW6 trams to determine performance"", dated September 1950. Report is in complete, refers to the graphs which have not been included. Report looks at the current consumption using an oscillograph, on PCC 980 and newly completed SW6 959. Gives tests results, methods, location and details of the trams.trams, tramways, preston workshops, reports, specification, tramcars, pcc, tram 980, tram 959

1579.1 - Bound specification - 20 sheets - stapled within brown paper covers and sealed with black tape on the left hand side. Titled "Hawthorn Tramways Trust Specification of Car Bodies Contract No. 12". Gives the General conditions of the contract, specifications and forms for tendering. Prepared by McCarty Underwood & Co. Consulting Engineers 31 Queen St Melbourne. Contains completed tender forms, prices and some minor initialled alterations to the tender. The document is the HTT or Trusts copy of the tender and it has been signed by Duncan and Fraser and the HTT and on the rear sheet has the seal of the Trust. Gives prices and dates for delivery of 10 bogie and 9 combination (4 wheel) tramcar bodies. .2 - letter - typed on quarto paper - from Duncan & Fraser dated 13/4/1915 - advising that they had posted their tender document and questioning the type of "Ash" timber to be used. Has been endorsed on the left hand margin as item G referred to in the tender document. .3 - letter - typed on quarto paper - from Duncan & Fraser dated 13/4/1915 - advising that they had instructed the National Bank of Australasia to hand you the fixed deposit, but it had been sent to Adelaide in error. Letter enclosed the deposit receipt. .4 - Receipt on pre-printed receipt paper with a South Australian Government duty stamped impressed into the paper on the right hand edge, with an adhesive strip on the rear of the left hand side. Dated 26 May 1916 - received from the Hawthorn Tramways Trust the Fixed Deposit and interest.On the top cover in ink or pencil "Duncan & Fraser / Tramcar contract / Trusts Copy"trams, tramways, htt, hawthorn, duncan fraser, tramcars, bogie trams

1580.1 - Bound specification - 20 sheets - stapled within brown paper covers and sealed with black tape on the left hand side. Titled "Hawthorn Tramways Trust Specification of Car Bodies Contract No. 12A". Gives the General conditions of the contract, specifications and forms for tendering. Prepared by McCarty Underwood & Co. Consulting Engineers 31 Queen St Melbourne. Document originally printed for the first contract for tramcar bodies. This document has been changed as a result of negotiations by Duncan and Fraser and the HTT, which have been initially by both parties. Contains completed tender forms, prices and some minor initialled alterations to the tender. The document is the HTT or Trusts copy of the tender and it has been signed by Duncan and Fraser and the HTT and on the rear sheet has the seal of the Trust. Gives prices and dates for delivery of 8 bogie and 7 combination (4 wheel) tramcar bodies. .2 - letter - typed on quarto paper - two sheets - from Duncan & Fraser dated 10/7/1916 advising of changes in materials and equipment that was being offered, partly due to availability due to World War 1. Has been endorsed on the left hand margin as item referred to in the tender document. .3 - copy letter - typed on quarto paper - two sheets, dated 26/7/1916 to Robert Duncan of Duncan & Fraser c/- of the Grand Hotel in Spring St., advising of the acceptance of the tender, the price, modifications to bogie trams and combination trams. .4 - letter - typed on quarto paper - from Duncan & Fraser - dated 5/8/1916, concerning the payment of the contract deposit.On the top cover in ink or pencil "Duncan & Fraser / Trusts Copy"trams, tramways, htt, hawthorn, duncan fraser, tramcars, bogie trams

Tender document - report - specification - 16 pages - stapled in the top left hand corner, with Public Transport Corporation logo in the top right hand corner, titled "Request for Proposal for Consultancy Services (Reference 95085)". Consultant was to provide advice on the restoration of three heritage trams during 1995 as part of the Heritage fleet - S164, T180 and X217. Gives details of each trams and advice to be provided. Prepared by Ian Cordwell.In ink on the top right hand corner "1989", and on bottom edge "3.07m / 43"trams, tramways, ptc, tramcars, heritage, s class, t class, x class

Specification or report - 3 A4 pages, photocopied titled "New Non-articulated tramcar for Melbourne" with notation "(Z1 & Z2 class trams" above heading in ink. Gives the detail of the tramcar, classification, developers (builders and suppliers), description, history, contract price, warranty, vehicle performance, dimensions, suspension, propulsion, braking, electrical and control systems and body specifications.has "See Fraser Donaldson at lunchtime" in ink along the top of the first page and "(Z1 & Z2 class trams" above heading in ink.trams, tramways, z class, commonwealth engineering, comeng, asea, mmtb, new trams

Specification or report - 5 A4 pages, photocopied titled "Z3 class tram - Melbourne, Australia". Gives the detail of the tramcar, classification, developers (builders and suppliers), description, history, contract price, warranty, vehicle performance, dimensions, suspension, propulsion, braking, electrical and control systems and body specifications and a list of work done at Preston Workshops.trams, tramways, z3 class, commonwealth engineering, comeng, aeg, duwag, bogies, mmtb, new trams

Newspaper clipping form an unknown newspaper and date showing a method of testing the speed of electric trams - using a motor-cycle wheel with a speedometer attachment. Attached to a W class tramcar at Princes Bridge. Taken during the 1920's.trams, tramways, mmtb, princes bridge, testing, specification, tramcars

Report - 7 quarto typed sheets - untitled, but gives a detailed description of the design basis and construction of the SW6 class tram. Dated May 1939. Details the design after Bell's overseas trip the previous year. Details dimensions, seating, ventilation, seating, doors, structure, construct, timber, materials, door engines, cab equipment, PA system, interior appearances, flooring, colours, lighting, conductor's bell / signals, trucks, bolster, wheels, brake shoes, braking, motors, acceleration, performance, controllers, contactors, compressor. Gives a detailed list of the specifications.Has a note in pencil about a typographical error on the bottom of the sheet.trams, tramways, sw6 class, specification, tramcars, tram controllers, tram equipment, tramcar design

Specification or Tender Document - titled "Design, Manufacture and delivery of 100 only all-electric trams", and "Background Information and Preliminary Specification", dated June 1965. Bound into a brown foolscap card cover. Details the conditions of tender, conditions of contract, notes, specification, gives background information about Melbourne, dimensions, performance, drivers and conductors, trucks, wheels, brakes, electrical equipment, control panels and drawings. The drawings give a map of the system, typical city route, Glenferrie Road route (grade diagram), concrete track construction, min. radius curves, loading gauge, all-electric tram and mounting details for the trolley base, schedule of prices, tender form, form of contract, schedule of information to be provided by the tenderer. Comprises: 1 - Conditions of Tendering - 1 page 2 - Conditions of Contract - 4 pages 3 - Contents - 3 pages 4 - Notes for prospective tenderers - dated June 1965 5 - General nature of contract - 21 pages 6 - Appendix A - climate data - two sheets 7 - List of 14 appended drawings 8 - O.6887A - cross section of trolley wire 9 - P.13855 - Glenferrie Road, Longitudinal Section 10 - P.13856 - Wattle Park Route 11 - P.13857 - East Preston Route 12 - P13858 - Concrete track construction 13 - P13859 - Open track construction 14 - P.13860 - Paved ballast track construction 15 - P.13887 - Tram Route - locations of substations and section switches 16 - P.13888 - Minimum radius service curves to give minimum clearance between tramcars 17 - P.13889 - Grooved Rail - 102 pounds per yard and tire profile 18 - R10-301 - Loading gauge, proposed electric tramcars 19 - R9706K - Rolling stock data, tramcars 20 - R10306 - Collins Points Shifter - Wiring diagram. 21 - Schedule of data to be supplied by the tenderer 22 - notes on Automatic Points shifters - 2 sheets 23 - Tender prices and delivery periods - 2 sheets. See Reg Item 2266 for the 1972 version and 1583 for the August 1966 version. See Reg Item 4049 for associated newspaper cuttings. See file htd4667i1.pdf for scans of the drawings.In ink in top right hand corner - "Lees"trams, tramways, specification, tenders, z class, mmtb, melbourne

Exercise book with personal notes on tramcar maintenance, operations, recovery etc of C. Willoughby in a Spicers Tudor Exercise book - 64 pages with arithmetical tables on the rear cover. Topics covered: Rail Grinder - details on how to operate and maintain it North Fitzroy Dick Kerr, Clyde, K35 and RC2 Controller sequences and diagrams - notes on testing and faults Buzzer wiring diagrams Maintenance of trams interiors and rooves - items to be checked for Line Breakers Lighting Circuits Compressors Trolley poles etc Air operated doors Re-railing of Maximum Traction trams - 22E ditto for equal wheel bogies ditto when split points Use of false trucks Derailments on the Royal Park line Electrical equipment faults Adjusting Trolley Poles heights and tension Notes on truck types and braking Brake diagram summary, giving specifications and a list of relevant drawings Forms for the insulation testing of the Rail Grinders Checking motor leads and electrical equipment - written on the rear of a St Patrick's Day Procession notice for 1962. Advice from Neil Elfick, 23/6/2018 knew him when the Running Shed Foreman at Kew Depot.trams, tramways, tramcars, faults, controllers, 22e trucks, derailments, accidents, royal park, grinder, notices and information, st patricks day