BHS CollectionOriginal Sepia Photograph of tramway employees, in uniform, badge numbers visible. Card Mounted. '1908' in pencil on reverse.person, individual, basil miller

Demonstrates aspects of Safeworking on the Ballarat Tramway system from 1960 to c1936 when replaced by electric signs. Yields Information about the operation of Ballarat's trams and safeworking procedures. Demonstrates what can happen in use - has been run over by a tram - possibly being exchanged on the move or some other story.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath, flush with the outside edges in which the words "STURT ST RUBICON ST " stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg. The staff has been run over by a tram and had the last part of the object cut off. Used as a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, to 53, 2473 and 4444 to 4448, , 4996 and 4497 and Reg item 934 and 988 for articles on the safeworking systems.Ballarat Tramways Section Staff Sturt St Rubicon Sttrams, tramways, staff, safeworking, tramway staffs, sec, signals

Demonstrates aspects of Safeworking on the Ballarat Tramway system from 1960 to c1936 when replaced by electric signs. Yields Information about the operation of Ballarat's trams and safeworking procedures.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath, flush with the outside edges in which the words "DARLING ST LOOP RUBICON ST LOOP " stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg. Used as a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, to 53, 2473 and 4444 to 4448, , 4996 and 4497 and Reg item 934 and 988 for articles on the safeworking systems.Ballarat Tramways Section Staff Darling St Loop Rubicon St Looptrams, tramways, staff, safeworking, tramway staffs, sec, signals

Used as a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, 52 and 53 and 4444 to 4448, , 4996 and 4497, 9037 and Reg item 934 and 988 for articles on the safeworking systems.Demonstrates aspects of Safeworking on the Ballarat Tramway system to c1936 when replaced by electric signals. Yields Information about the operation of Ballarat's trams and safeworking procedures.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath, flush with the outside edges in which the words "STURT ST. SOUTH ST. " stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg.trams, tramways, staff, safeworking, tramway staffs, sec, signals

Used as a means of authorising a tramcar to have sole use of the track between the named points to avoid head-on collisions. Safeworking object - known as a section staff. Not known when made, but in use, until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, 52 and 53, 2473 and 4444 to 4448 , 4996 and 4497 and Reg item 934 and 988 for articles on the safeworking systems.Demonstrates aspects of Safeworking on the Ballarat Tramway system used to c1936 when replaced by electric signals. Yields Information about the operation of Ballarat's trams and safeworking procedures.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath, flush with the outside edges in which the words "PLEASANT ST - GARDENS LOOP NTH. " stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg.tramcars, tramways, staff, safeworking, tramway staffs, sec, esco

Demonstrates aspects of Safeworking on the Ballarat Tramway system from 1960 to c1936 when replaced by electric signs. Yields Information about the operation of Ballarat's trams and safeworking procedures.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath, flush with the outside edges in which the words "SOUTH ST. RUBICON ST." stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg. Used a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, to 53, 2473 and 4444 to 4448, , 4996 and 4497 and Reg item 934 and 988 for articles on the safeworking systems.trams, tramways, staff, safeworking, tramway staffs, sec, signals

Demonstrates aspects of Safeworking on the Ballarat Tramway system from 1960 to c1936 when replaced by electric signs. Yields Information about the operation of Ballarat's trams and safeworking procedures.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath, flush with the outside edges in which the words "CARLTON ST HADDON ST LOOP " stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg. Used as a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, to 53, 2473 and 4444 to 4448, 4996 and 4497 and Reg item 934 and 988 for articles on the safeworking systems.trams, tramways, staff, safeworking, tramway staffs, sec, signals

Demonstrates aspects of Safeworking on the Ballarat Tramway system from 1960 to c1936 when replaced by electric signs. Yields Information about the operation of Ballarat's trams and safeworking procedures.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath, flush with the outside edges in which the words "PLEASANT ST TO CARLTON ST LOOP " stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg. Used as a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, to 53, 2473 and 4444 to 4448, , 4996 and 4497 and Reg item 934 and 988 for articles on the safeworking systems.trams, tramways, staff, safeworking, tramway staffs, sec, signals

Demonstrates aspects of Safeworking on the Ballarat Tramway system from 1960 to c1936 when replaced by electric signs. Yields Information about the operation of Ballarat's trams and safeworking procedures.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath, flush with the outside edges in which the words "URQUHART ST LOOP TO GREY ST LOOP " stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg. Used as a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, to 53, 2473 and 4444 to 4448, , 4996 and 4497 and Reg item 934 and 988 for articles on the safeworking systems.trams, tramways, staff, safeworking, tramway staffs, sec, signals

Demonstrates aspects of Safeworking on the Ballarat Tramway system from 1960 to c1936 when replaced by electric signs. Yields Information about the operation of Ballarat's trams and safeworking procedures.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath, flush with the outside edges in which the words "VICTORIA PARK LOOP / CARLTON ST LOOP" stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg. The top line of words has a reddish paint inlay. Used as a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, to 53, 2473 and 4444 to 4448 and Reg item 934 and 988 for articles on the safeworking systems.trams, tramways, staff, safeworking, tramway staffs, sec, signals

Demonstrates aspects of Safeworking on the Ballarat Tramway system from 1960 to c1936 when replaced by electric signs. Yields Information about the operation of Ballarat's trams and safeworking procedures.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath, flush with the outside edges in which the words "CAR SHED LOOP / MACARTHUR ST LOOP" stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg. The stamped area appears to have been polished compared to the others. Used as a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, to 53, 2473 and 4444 to 4448, 4496 and Reg item 934 and 988 for articles on the safeworking systems.trams, tramways, staff, safeworking, tramway staffs, sec, signals

Demonstrates aspects of Safeworking on the Ballarat Tramway system from 1960 to c1936 when replaced by electric signs. Yields Information about the operation of Ballarat's trams and safeworking procedures.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath, flush with the outside edges in which the words "CARLTON ST. CAR SHED LOOP." stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg. The part with the words "CAR SHED LOOP" appears to have been ground down and a previous location name taken out and replaced. Used a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, to 53, 2473 and 4444 to 4448, , 4996 and 4497 and Reg item 934 and 988 for articles on the safeworking systems.trams, tramways, staff, safeworking, tramway staffs, sec, signals

Demonstrates aspects of Safeworking on the Ballarat Tramway system from 1960 to c1936 when replaced by electric signs. Yields Information about the operation of Ballarat's trams and safeworking procedures.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath with the words "SEYMOUR ST LOOP GREGORY ST LOOP." stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg. The part with the words giving the two locations appears to have been ground down and a previous location names taken out and replaced. Used a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, to 53, 2473 and 4444 to 4448, , 4996 and 4497 and Reg item 934 and 988 for articles on the safeworking systems.trams, tramways, staff, safeworking, tramway staffs, sec, signals

Yields information about on the Ballarat tramway staff's being shown at a local meeting after closure of the SEC operated Ballarat Tramway systemNewspaper cutting from The Courier, Thursday 23/9/1971, titled "Collector's item - relic of early days on trams" with Mrs Loyalo Hill and Mrs R Drury looking at one of the brass staffs or Section staff, used by ESCo and SEC up to 1936 at a meeting of the Ballarat turf Club the previous day. Notes that the staff is for the Victoria Park Loop to Carlton St loop - see item 4896 for the actual item.staff, safeworking, tramway staffs, sec, signals, esco

Copy of an article by Neville Gower, published in "Somersault", the magazine of the Signalling Record Society of Victoria, May 1988. Describes location of loops in horse drawn era compared to those of the ESCo area 1905 to 1934, with reference to changes made to ESCo Loops by SECV upon rehabilitation of the system, based upon changes on BTM's collection of staffs. Published in p54, 55, 56 and 60 of Somersault, May 1988. Copy supplied by Graeme Reynolds, printed with a dot matrix printer. Page 56 and cover page supplied by Warren Doubleday (2/1999). Was a follow up article or item by Peter Barry in the July 1988 issue and an article on Bendigo during 1989. (Information provided by David Langley editor at the time - 1/1999). See also item 988.p1 - 54 has been enhanced in black ink.trams, tramways, signals, crossing loop, esco, tramway staffs

Tramway staff names and addresses, handwritten entries, black cover, A - Z(in colour) partitioning.person, individual, basil miller

Employees Register for the Electric Supply Co. of Victoria, 1905 to 1934. Gives details of each employee, position, wage, address and general details and when left employment. Printed by Harry Tulloch Prop Ltd of Lydiard St Demonstrates the method that ESCo used to record its tramway employees. Yields information about the individual employee.Book - bound, heavy card cover, with green cover with "Ballarat Tramways - Tramway Staff" - in gold block, containing approx 200 sheets, ruled.esco, employees, register, list, tramways, ballarat

Newspaper clipping about former tramway staff employed as post men. - circa Feb. 1956. Titled "Trammen as Postmen". Record revised and image added 21/9/2013."Feb. 56"trams, tramways, geelong, employees, closure

Produced by the Museum to show tramway staff that the person has paid an admittance for example the horse tram, as well as being given a ticket. Produced by AAC.Demonstrates a method of showing tramway staff that the person has paid their admittance.Sheet of 6 printed 19mm wide Tyvek wristbands number 00001 to 00006 with an adhesive strip at one end. Has the BTM pictogram logo.btm, tickets, wrist bands, marketing

Document dated 13/8/1943, titled "Tramway agreement extracts - current as at 1/9/43" sets out basic wages, war loading, tramway staff working conditions, rosters, days off, callbacks, relief, sick leave, uniform issue, Sunday rates, sickness, issue of clogs, and union notices.Yields information about SECV agreements with tramway workers during World War 2.Administrative record - three foolscap duplicated sheets stapled in top left hand corner.tramways, secv, unions, wages, world war ii, uniforms

Memo dated 1/2/1962 from Engineer and Manager to Manager Ballarat Branch titled "Ballarat - Bendigo Tramways - Personnel", about the proposed closure of both systems with an announcement later that week, about the future employment of the existing tramway staff, ex-gratia payments depending the years of service, alternative employment within the SECV and the services of the Industrial Officer.Yields information the 1962 move to close both Ballarat and Bendigo and the impact of the loss of employment on the SECV crews and wages employees.Memo - foolscap sheets - typed carbon copy.secv, closure, bendigo, ballarat, tramways, staff, personnel

Shows a group of Geelong tramway crews and staff c1942/43Yields information on the uniforms worn by Geelong tramway crews and other staff.Copy photograph on black plastic type backing with black edges of a group of Geelong tramway employees, mostly in uniform standing in front of the Geelong Power station and tram depot in Brougham St, c1942/43.geelong, crews, power station, tramways

45 No. Dept. of Road Transport and tramway staff tickets used in the 1940's to 1960's for safeworking on single lines of Maitland, Newcastle and Sydney tram lines, see attached listing for full details, descriptions etc. Printed on flimsy paper. Some of the tickets show the personal name of the Government printer. This would enable time of printing to be better determined. (48 tickets in image). Image of list added 29/9/2013 - see related documents for details.trams, tramways, nsw, sydney, maitland, newcastle, safeworking, staff tickets

Yields information about the people in the close city area who had been appointed as Justices of the Peace - mid 1960's. Could be used by tramway staff for statutory declaration and other purposes.Typed list of "Justices of the Peace" - (Close city Area) for the information to Ballarat Tramway staff in the event that they required their services. From an SEC depot noticeboard. Many well known corporate names - gives surname, initial and address. Bartrop E Black F Conaughton R Cunningham G Denmead L Henderson W Holloway J King R Lynch J McDonald W McVilly North L Packham H Pittard A Richmond G Webb Kjustices of the peace

Copy of printed or photocopied letter sent to all Public Transport Corporation (V/Line - railway and The Met - Tramways and bus) dated 25/6/1992 signed by the Chief Executive Office, Ian F.X. Stoney. Letter concerns the "alleged" drinking of tramway staff and illegal stoppage of trams, as published in the Sunday Age. Investigations determined the photo was the Coburg Tram terminus and the crew member was drinking a "Bundaberg Ginger Beer" stubbie. Letter written in support of staff and to criticize the AGE newspaper who refused to supply a negative.trams, tramways, ptc, i. stoney, sunday age, tram crews

Newspaper Clipping from the Courier, 8 March 1939 of Ballarat No. 29 decorated for the 1939 floral festival. Paper flowers made by the wives of the tramway staff members. Photographed with four SEC hostesses standing along side the tram and another four inside the tram. Photo caption noted that the tram is illuminated at night. See Reg. Item 1363 and 1369 for SEC photos of the tram and Reg. Item 2915 for another newspaper photo of the tram. See Reg Item 3575 for a copy negative of the same photograph. floral tram, 1939 floral festival, decorated trams, special trams

SEC Provincial Tramways "Staff Ticket" No. Aa002550. Printed on heavy dark grey paper with black printing. Ticket good for single trip only, of use by employees when travelling on Commission's business. Form No. TYE-2-19. Not known when printed, possibly 1960's maybe earlier. See also 3649 for an 1930's sample. .1 - set of two staff tickets - Nos. A12299 and A12300 - from the Collection of Bob Prentice. Possibly given to Bob for free tram travel. trams, tramways, tickets, staff tickets, employees pass

Sepia toned photograph titled "Runaway Electric Tram" of a W class tram that has over run or runaway from the William St terminus and is blocking cable trams in Collins St. Could be tram 230, 236, 290, 296. Has the original newspaper caption under neath - date not know - late 1920's. Shows tramway staff (captioned as Engineers) attaching a cable to pull the tram back over the intersection. Possibly one a set of cards made for the 70th anniversary of South Melbourne Depot.trams, tramways, w class, accidents, collins st, william st, cable trams