The Athletics Club under the guidance of a committee of workers, which included Mr Stan Hemmings and Mr Alec McCullough, sponsored a Junior Athletics Club which became the Gray-Y Club for young boys and HY-Y for older lads. Mr A E Clark (YMCA) had the idea of adopting the American Gray-Y System which was to instill in the boys good principles and values similar to those of the service clubs i.e. YMCA, the Masons and Buffalo Lodge. Story has it that the town was virtually crime free for many years. The Athletics Club became a very powerful force in Mount Beauty and assisted other fledgling groups to get started. The committee had the bright idea that they could raise money and entertain the men who lived in the outlying camps by running sporting exhibitions by their members and the Gray-Y boys for entertainment.It is a connection to the early history of Mount Beauty regarding the start of an athletics club.Blue material banner with gold fringe and inscription in middle.Red material triangle inserted within banner and red material H and I (overlapping) sewed into the middle of the triangletextile, youth club, mt beauty, athletics club, gray-y club, kiewa hydro electric scheme

A Cortland President tennis racquet, with string whipping on shoulders, and leather handle grip with quatrefoil perforations. Base of head on obverse features Courtland logo, and on reverse, the model name. Throat features decal of Courtland trademark, featuring stylised image of male playing tennis within a red triangle device. Materials: Wood, Nylon, Adhesive tape, Leather, Cloth, Ink, String, Glue, Lacquer, Metaltennis

A Wilson Kramer Cup tennis racquet. Base of head features Wilson logo. Throat features rendered gold trophy cup device. Shaft and butt cap feature 'W' trademark. Leather handle grip features triangle-pattered perforations. Materials: Wood, Nylon, Leather, Ink, Glue, Lacquer, Metal, Plastic, Paint, Ribbon, Adhesive tape, Stringtennis

A Wilson, Jack Kramer Cup tennis racquet. Base of head features Wilson logo. Throat features plain gold trophy cup device. Shaft features decal head and neck illustration of Kramer. Shaft and butt cap feature 'W' trademark. Leather handle grip features triangle-pattered perforations. Materials: Wood, Nylon, Leather, Ink, Glue, Lacquer, Metal, Plastic, Paint, Ribbon, Adhesive tape, Stringtennis

A Wilson, Maureen Connolly Cup tennis racquet. Base of head features Wilson logo. Throat features decal head and shoulders image of Connolly. Shaft features decal image of a rendered cup trophy. Base of shaft and plastic butt cap feature 'W' trademark. Leather handle grip features triangle-patterned perforations. Materials: Wood, Nylon, Leather, Ink, Glue, Lacquer, Metal, Paint, Ribbon, Adhesive tape, Plastic, Stringtennis

BHS CollectionHanro Journal: The front has a solid front and back cover and is of a green material with a marble type pattern trimmed at the top and bottom right hand corners with light brown suede triangles. The curved spine of the book is also light brown suede and the binding extends to 4cm on to the cover. 5.5cm down from the top of the spine is a 4.9 x 3.3cm red sticker with gold trim top and bottom of three strips and flowers under and on top of the third strips. The sticker has a tear and dog ears at the bottom. In gold in the centre is the word JOURNAL. The back of the journal is the same as the front but has more wear noticeable at top left and a tear at the bottom. Inside the cover is a paper lining of blue and cream mottled background with red uneven swirl a cream cloth spine with cotton thread for attaching. When the Journal is closed the pages form a colourful pattern of red, yellow, blue and green. Inside the book is light blue paper, on the left top hand written in pencil is 11/-, underneath that is 20/-. Numbers 24100, 27236, 25951, 25844 and some dacomb shorthand further down the page. On the right hand side centre of the page is the heading, hand written in black ink which has been underlined in red is *Hanro (Aust) Bendigo Knitting Mills Pty Ltd May 13th 1926* Page 1 of the Journal :- The Journal is all hand written in black ink and ruled up in red pen. At the top headed *Journal*, underlined in red. The page is ruled up into ten columns of various sizes. First column is the date May 1926. The page lists the distribution of Ordinary and Deferred Shared and their amounts. Next is Expenditure, for the land and buildings and setting up of the business, plant and equipment and various assets acquired from Bendigo Knitting Mills Pty Ltd. At the back of the book is a Debit Note From *Hands chin & Ornis S.A. Liestal (Suisse) to *Hanro* (Aust.) Bendigo Knitting Mills Pty. Ltd. Dated 10th September 1932. Debit Note No. 319. *Our payment to Messrs. Jacky, Maeder & C0, Basle as per your letter of August 10th 1932. SFr. 37.70 pounds * Then hand written in pencil is *Charged ? 168*` Also at the back is a group of letters with a hand written note in pencil, on the front dated 20/01/33 attached with a metal clip and pin reads *Bad Debts to be written off* under that it lists the names, where they are from and the amount owning and the total. Box 116Bbendigo, industry, hanro journal., hanro. journal

The purpose and contents of the case are unknown. However, the word "Kwairobai" has been used in a group of words listed as solid fuels - coal, coke, fire wood, charcoal and spunk and ‘Kwairobai’ - in a 1939 book 'Consular Reports Issue 31' in reference to the publication of Japanese Trade-marks. This particular Trade-mark, No. 53, is a "cross in a triangle". the maker was To. Jinjudo of Osaka, Japan. This case belonged to Dr William Roy Angus and is now part of Flagstaff Hill’s comprehensive W.R. Angus Collection, donated by the family of Dr W R Angus, 1901-1970, surgeon and oculist. The W.R. Angus Collection: - The W.R. Angus Collection includes historical medical equipment, surgical instruments and material belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) and Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. It includes historical medical and surgical equipment and instruments from the doctors Edward and Thomas Ryan of Nhill, Victoria. Dr Angus married Gladys in 1927 at Ballarat, the nearest big city to Nhill where he began as a Medical Assistant. He was also Acting House surgeon at the Nhill hospital where their two daughters were born. During World War II He served as a Military Doctor in the Australian Defence Force. Dr Angus and his family moved to Warrnambool in 1939, where Dr Angus operated his own medical practice. He later added the part-time Port Medical Officer responsibility and was the last person appointed to that position. Both Dr Angus and his wife were very involved in the local community, including the planning stages of the new Flagstaff Hill and the layout of the gardens there. Dr Angus passed away in March 1970.This case is an example of objects belonging to Dr. W. R. Angus, 1901-1970, surgeon and oculist. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The Collection includes historical medical objects that date back to the late 1800s.Case, a rectangular brass case neatly covered in brown velvet fabric with a paper label attached. It has a long sliding cover with three rows of cutout stars with a red background, and a decorative brass thumb grip at one end that has three Japanese characters on it. Inside are three cylindrical rolls of white fabric with unknown contents. The label has English and Japanese text, and a logo with three Japanese characters. It was made by To. Jimjudo in Osaka Japan. This object is part of the W. R. Angus Collection.On the label and thumb grip; [unknown] Japanese characters On the label; “KWAIROBAI / KIMIGASODE / MANUFACTURED BY TO. JINJUDO / OSAKA JAPAN”flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, flagstaff hill maritime museum and village, dr w r angus, dr ryan, w.r. angus collection, metal case, velvet covered case, kwairobai, kimigasode, to. jinjudo, osaka jap

This Zinc Cap Porcelain Liner was recovered from the (1908) shipwreck site of the FALLS OF HALLADALE. The purpose of cap liners was to assist with the safe preserving and storage of perishable foodstuffs in an age when refrigeration was generally unavailable. These round, coarse-glass inserts formed part of the screw lids used with the Ball Mason style of canning fruit jars. The liner was placed inside the zinc cap to stop the contents of the jar reacting with the zinc. It prevented the metallic tainting of food as well as the corrosion of the metallic lid. On March 30, 1869, Lewis R Boyd was issued with patent # 88439 for an “Improved Mode of Preventing Corrosion in Metallic Caps”. From the 1870s to the 1950s, large quantities of these liners were produced by a number of glass manufacturing companies. They are consequently difficult to date or identify. “It is assumed that most of the earlier versions of these liners have the name ‘BOYD’S’ or ‘BOYD’ embossed on them. Later versions may or may not have the name included in the lettering”. (http://www.glassbottlemarks.com). Only a few were made of porcelain, the great majority being made first of transparent and later of translucent or opaque glass. The different emblems of triangles, circles, and crosses embossed on the front face of the liners are assumed to signify mould or model types rather than the company that produced them. This particular artefact is one of 14 cap liners that were retrieved from the shipwreck site and are now part of the Flagstaff Hill Maritime Village collection. The Maltese Cross and “BOYD’S GENUINE PORCELAIN LINED” lettering are unique to this piece. However, it is evident from the markings and materials of the other cap liners, that they originally formed sets or series. Six are larger (8 mm depth x 85mm diameter), of greenish hue with ground glass texture, and support the raised emblem of a compass needle. Two are medium-sized (75mm diameter) with two raised dots in a central circle and the lettering “Patd. APR 25.82”. This particular cap liner is likely to have also been one of a mass-produced line being imported from America. The iron-hulled sailing ship FALLS OF HALLADALE was a bulk carrier of general cargo en route from New York to Melbourne and Sydney. In her hold, along with 56,763 tiles of unusual beautiful green American slates (roofing tiles), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6500 gallons of oil, 14400 gallons of benzene, and many other manufactured items, were 117 cases of crockery and glassware. The FALLS OF HALLADALE came aground on a reef off the Peterborough headland at 3 am on the morning of the 15th of November, 1908. The captain and 29 crew members all survived, but her valuable cargo was largely lost, despite two salvage attempts in1908-09 and 1910. The iron-hulled, four-masted barque, the Falls of Halladale, was a bulk carrier of general cargo. She left New York in August 1908 on her way to Melbourne and Sydney. In her hold, along with 56,763 tiles of unusual beautiful green American slates (roofing tiles), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6500 gallons of oil, 14400 gallons of benzene, and many other manufactured items, were 117 cases of crockery and glassware. Three months later and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland at 3 am on the morning of the 15th of November, 1908. The captain and 29 crew members all survived, but her valuable cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. ABOUT THE ‘FALLS OF HALLADALE’ (1886 - 1908) Built: in1886 by Russell & Co., Greenock shipyards, River Clyde, Scotland, UK. The company was founded in 1870 (or 1873) as a partnership between Joseph Russell (1834-1917), Anderson Rodger and William Todd Lithgow. During the period 1882-92 Russell & Co., they standardised designs, which sped up their building process so much that they were able to build 271 ships over that time. In 1886 they introduced a 3000 ton class of sailing vessel with auxiliary engines and brace halyard winches. In 1890 they broke the world output record. Owner: Falls Line, Wright, Breakenridge & Co, 111 Union Street, Glasgow, Scotland. Configuration: Four masted sailing ship; iron-hulled barque; iron masts, wire rigging, fore & aft lifting bridges. Size: Length 83.87m x Breadth 12.6m x Depth 7.23m, Gross tonnage 2085 ton Wrecked: the night of 14th November 1908, Curdies Inlet, Peterborough south west Victoria Crew: 29 The Falls of Halladale was a four-masted sailing ship built-in 1886 in Glasgow, Scotland, for the long-distance cargo trade and was mostly used for Pacific grain trade. She was owned by Wright, Breakenridge & Co of Glasgow and was one of several Falls Line ships, all of which were named after waterfalls in Scotland. The lines flag was of red, blue and white vertical stripes. The Falls of Halladale had a sturdy construction built to carry maximum cargo and able to maintain full sail in heavy gales, one of the last of the ‘windjammers’ that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. Previous to this, heavily loaded vessels could have heavy seas break along the full length of the deck, causing serious injury or even death to those on deck. The new, raised catwalk-type decking allowed the crew to move above the deck stormy conditions. This idea is still used today on the most modern tankers and cargo vessels and has proved to be an important step forward in the safety of men at sea. On 4th August 1908, with new sails, 29 crew, and 2800 tons of cargo, the Falls of Halladale left New York, bound for Melbourne and Sydney via the Cape of Good Hope. The cargo on board was valued at £35,000 and included 56,763 tiles of American slate roofing tiles (roof slates), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6,500 gallons of oil, 14,400 gallons of benzene, plumbing iron, 117 cases of crockery and glassware and many other manufactured items. The Falls of Halladale had been at sail for 102 days when, at 3 am on the night of 14th November 1908, under full sail in calm seas with a six knots breeze behind and misleading fog along the coast, the great vessel rose upon an ocean swell and settled on top of a submerged reef near Peterborough on south-west Victoria’s coast. The ship was jammed on the rocks and began filling with water. The crew launched the two lifeboats and all 29 crew landed safely on the beach over 4 miles away at the Bay of Islands. The postmistress at Peterborough, who kept a watch for vessels in distress, saw the stranding and sent out an alert to the local people. A rescue party went to the aid of the sailors and the Port Campbell rocket crew was dispatched, but the crew had all managed to reach shore safely by the time help arrived. The ship stayed in full sail on the rocky shelf for nearly two months, attracting hundreds of sightseers who watched her slowly disintegrate until the pounding seas and dynamiting by salvagers finally broke her back, and her remains disappeared back into deeper water. The valuable cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. Further salvage operations were made from 1974-1986, during which time 22,000 slate tiles were recovered with the help of 14 oil drums to float them, plus personal artefacts, ship fittings, reams of paper and other items. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson’s navigational error, not too technical failure of the Clyde-built ship. The shipwreck is a popular site for divers, about 300m offshore and in 3 – 15m of water. Some of the original cargo can be seen at the site, including pieces of roof slate and coils of barbed wire. The Falls of Halladale shipwreck is listed on the Victorian Heritage Register (No. S255). She was one of the last ships to sail the Trade Routes. She is one of the first vessels to have fore and aft lifting bridges. She is an example of the remains of an International Cargo Ship and also represents aspects of Victoria’s shipping industry. The wreck is protected as a Historic Shipwreck under the Commonwealth Historic Shipwrecks Act (1976). A circular translucent glass disc in good condition with raised upper case lettering around 8mm rim – “BOYD’S GENUINE PORCELAIN LINED” - and a raised central emblem of a Maltese Cross. On the reverse face in the centre of the disc, there is a raised numeral “3”. falls of halladale, wright, breakenridge & co of glasgow, unusual beautiful green american slates (roofing tiles), warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shipwrecked-artefact, zinc cap porcelain liner, boyd’s genuine porcelain lined, glass lid, opaque disc, food preserving, fruit bottling, cap liner, shipwrecked coast, flagstaff hill maritime museum, shipwreck artefact, 1908 shipwreck

“The lIrusaqi are monotheistic Void worshippers. The Void is an extremely complex concept, and seems to include multiple interpretations of the two great signs, the triangle and the circle. On one level the triangle symbolises Man, and on another, the whole material universe. The Void, symbolised by the circle, is both within and without Man and the material universe. So, we find many variations of the circle and triangle imagery permeating the whole of lrusaqi society, i.e. villages are laid out in pyramid form, with a circular well at the centre, towns are built on a series of triangles, intersected by highways and the Court of the Imperium itself is based on a central circle within a triangle, with delegates to the Court in the three corners, while the positions of the three Heads of State and the one Head Speaker, repeat the pattern. The Void itself is always portrayed as an expanding and contracting circle, (not unlike the aperture of a camera). This Robe is worn by the High Priest’s acolyte and spokesman. The Voidsayer interprets the prophesies and sayings of the Priest, in words readily understood by the common people. The disc on the back of the Robe is the Void, and the gold lines symbolise the words of the Priest, coming from the source of life. The Robe is covered in gold chain mail, a sign that the Robe-wearer will defend his master with his life, if necessary.” -Inga Hunter

It is a woolen khaki green great coat, with inter shoulder lining of khaki green canvas. There are back belt loop holes in the interior, lined by the same canvas. The pockets are made of the same canvas and are not sew to the interior of the coat at the bottom. The insides of the sleeves are lined with a more beige khaki green material. There is a split flap that is 500mm long in the middle at the bottom of the coat, which is fixed shut with two brown plastic buttons and a metal hook and eye at the bottom. The construction of the jacket is four panels and has been taken in at the waist for form above both pockets. The jacket has a back pleat from below the triangle stitching below the nape of the neck. The back belt has three metal insignia buttons, and the backside is lined with canvas. On both shoulders, there are epaulettes which have one metal insignia button each. On the front, there are three metal buttons on each on flap, and when the jacket is done up, the left flap goes on top. It has three button holes on the left flap and one button hole on the right flap for a large brown button on the inside of the left flap. There are two outer pockets on either side of the jacket. Beneath the jacket lapels, on either side there are metal buttons, and there are button holes for them in the middle of the bottom lapel. Where the upper and lower lapels are split, there is a hook and eye. There is a brown plastic button on the underside of both the upper lapels, which is where the extra flap of fabric on the inside of the left jacket flap, can be fixed as a face protector. The tag on the inside reads; DAVID KLEIN PTY. LTD. Victoria 1967 An arrow (Department of defence symbol) SIZE 6 CLASS 8405 66.012.0494 REGIMENTAL NO................... NAME......................... The regimantal number section had a number filled in but then scribbled out and another number written above, which is 359282. The name section was filled in with B.R.MIER. The name and regimental numbers were done in black marker pen. All the metal buttons are decorated with the medical corps symbol, which is a serpent-entwined rod (Rod of Asclepius) surrounded by a laurel wreath and above the rod is a crown (St Edward’s Crown). On the outside of the upper sleeves, just below the shoulder, there is two patches that signifies the rank of Staff Sergeant. The top patch is an embroided St Edward’s Crown and represents the staff rank. It is 47mm wide and 45mm. Below this there is a patch depicting the three stripes/ chevorns of the sergeant rank. The chevorn’s points face down, and the sides measure 66mm, while the depth down to the point is 86mm. The bottom lengths is 100mm on both sides and the top lengths are 9mm. coat, trench coat, great coat, medical corps, staff sergeant, b.p. mier, 359282, david klein pty. ltd., 1967

These pennants were introduced by Sunshine High School around 1959 in an attempt to instil among the students, a greater pride for the school. This particular pennant was hung for many years on the bedroom wall of the original student who bought it. It was later in the possession of a younger sibling who commenced going to Sunshine High School 19 years after the original student.Sunshine High School existed in its own right for a relatively short time from 1955 to 1991. The school buildings now form part of the Sunshine Campus of Victoria University. This pennant is one of the few items in our possession which serve as a reminder that Sunshine High School was once part of the secondary education system in the Western suburbs of Melbourne.Triangular shaped pennant made mainly from maroon coloured felt material, with yellow felt material used to make an edging stripe and two suspension loops along the short side of the triangle. Blue and yellow coloured inks are used to print the Sunshine High School 'SEEK LIGHT' logo and 'Sunshine hs' in antique style lettering."Sunshine hs"sunshine high school, pennant, seek light, felt, maroon.

Ernest Lance Young was born 24 March 1915 in Surrey Hills, the son of Ernest Augustus Young and Ruby Nichell Whitty. He married Beryl Mair in 1939 and died on 5 October 1999 at Mont Albert. Beryl Mair (1916-1976) was the daughter of David Miller (Dave) Mair and Lily Vipond Deakin. Dave Mair (1879-1938) was founder of the Kangaroo Cricket Club based at the MCG. The logo or emblem of the club was a kangaroo facing forward. From this one can assume that Mr Holland was a member of the club. The card was most probably sent prior in 1939 or soon after as following Dave Mair's death, as a mark of respect, the emblem was changed to a kangaroo facing to the left but with its head turned back. (Information from the donor).This is part of a large donation of material relating to the Deakin, Mair and Young families, all of whom had connections with Surrey Hills / Mont Albert. The donor is the daughter of Ernest Lance and Beryl Young.A light green card on thin paper with a total size slightly smaller than A4, folded into four. The lower edge of the front is folded back to reveal an embossed figure of a kangaroo facing forward in burnished gold. Inside are printed greetings personalised from Mr Holland and Marion to Mr and Mrs Young.On the folded triangle of the front in blue biro is the later addition of the number one within a circle. This mark was made by the donor. Inside in blue ink, inner LH side: "To / Mr. & Mrs. Young"; signed below the printed standard greeting in the same hand " Mr. Holland / & / Marion"christmas card, dave mair, david miller mair, ernest lance young, beryl mair, beryl young, mr. - holland, kangaroo club

A Bancroft Billie Jean King Tournament tennis racquet, with bamboo laminated frame, ribbon whipping around shoulders, and leather handle with triangle-patterned perforations. Bancroft logo features across base of head. Throat features model name, and decorative swirl device. Shaft features decal of King signature. Wreathed 'B' trademark on lower shaft, and red 'B' trademark on butt cap. Materials: Wood, Nylon, Leather, Glue, Lacquer, Metal, Ink, Plastic, Paint, Ribbon, Adhesive tape, Bambootennis

A Bancroft Billie Jean King Tournament tennis racquet, with bamboo laminated frame, ribbon whipping around shoulders, and leather handle with triangle-patterned perforations. Bancroft logo features across base of head. Throat features model name, and decorative swirl device. Shaft features decal of King signature. Wreathed 'B' trademark on lower shaft, and red 'B' trademark on butt cap. Materials: Wood, Nylon, Leather, Glue, Lacquer, Metal, Ink, Plastic, Paint, Ribbon, Adhesive tape, Bambootennis

A Bancroft Winner tennis racquet, with bamboo laminated frame, ribbon whipping around shoulders, and leather handle with triangle-patterned perforations. Bancroft logo features across base of head. Throat features model name, with wreath device. Wreathed 'B' trademark on lower shaft, and red 'B' trademark on butt cap. A furry lady bug sticker is adhered to shaft on obverse. Materials: Wood, Nylon, Leather, Glue, Lacquer, Metal, Ink, Plastic, Paint, Ribbon, Adhesive tape, Bambootennis

A Bancroft Winner Junior tennis racquet, with ribbon whipping around shoulders and shaft, and leather handle with triangle-patterned perforations. Bancroft logo features across base of head. Throat features model name, with wreath device. Wreathed 'B' trademark on lower shaft, and red 'B' trademark on butt cap. Materials: Wood, Nylon, Leather, Glue, Lacquer, Metal, Ink, Plastic, Paint, Ribbon, Adhesive tapetennis

A Bancroft Billie Jean King Signature tennis racquet, with wholly laminated wood frame, ribbon whipping around shoulders, and leather handle with triangle-patterned perforations. Bancroft logo features across base of head. Throat features model name. Wreathed 'B' trademark on lower shaft, and red 'B' trademark on butt cap. Materials: Wood, Nylon, Leather, Glue, Lacquer, Metal, Ink, Plastic, Paint, Adhesive tape, Ribbontennis

A Rawlings, John Newcombe Finalist tennis racquet, with ribbon whipping on shoulders and shaft, and leather handle grip with triangle-patterned perforations. Rawlings logo features across crown, and base of head. Model name features across throat. Cursive 'R' trademark features on lower shaft and in sunken butt cap. Materials: Wood, Nylon, Ink, Glue, Lacquer, Metal, Plastic, Adhesive tape, Leather, Ribbontennis

A Rawlings, John Newcombe Court King tennis racquet, with ribbon whipping on shoulders and shaft, and leather handle grip with triangle-patterned perforations. Rawlings logo features across crown, and along shaft. Model name features across base of head and throat. Cursive 'R' trademark features on lower shaft and in sunken butt cap. Materials: Wood, Nylon, Ink, Glue, Lacquer, Metal, Plastic, Leather, Ribbon, Enameltennis

A wooden tennis racquet with plastic ribbon whipping around shoulders and shaft, and a short, fine grooved handle. Decal on throat is Cortland Tennis Racquets logo within red triangle device crowned by gold wing device. Materials: Wood, Gut, Plastic, Leather, Cloth, Ink, String, Glue, Lacquer, Metaltennis

A Cortland American Driver tennis racquet, with string whipping on shoulders, and leather handle grip with quatrefoil perforations. Base of head on reverse features Courtland logo, and on obverse, the model name. Throat features decal of Courtland trademark, featuring stylised image of male playing tennis within a red triangle device. Shaft on obverse features a newer trademark with similar figural motif, but with a tennis ball in background instead of a triangle. Shaft on reverse features head illustration and signature reproduction of Joe Whalen. Cortland "Radio-Frequency/Resin Bonded" and "Smoke-Tone" decals feature on crown and shaft. 'C' trademark features on butt cover. Materials: Wood, Nylon, Plastic, Leather, Cloth, Ink, String, Glue, Lacquer, Metal, Painttennis

A Spalding "Top-Flite Professional" model tennis racquet, featuring whipping around shoulders and shaft. Has leather wrapped handle and leather butt cloth. Manufacturer name features across base of head. Model name and triple triangle symbol feature across throat. Wreathed 'S' symbole features on lower shaft and on butt cloth. Clear plastic packaging wrap still on handgrip. 'Wilson Chamionship'-branded stringing. Materials: Wood, Metal, Lacquer, Glue, Leather, Vinyl, Ink, String, Plastic, Adhesive tape, Painttennis

A concave wooden racquet, with cloth shoulder supports with whipping, and a fantail handle which has been squared off at the butt. Inscription across crown on obverse: QUEEN. Trademark decal on throat on obverse comprises of a woodland animal and a tennis racquet situated behind a triangle device containing the inscription: MAKERS/THE WALTER BENTLEY CO./.../NIAGARA FALLS. Materials: Wood, Gut, String, Cloth tape, Metal, Ink, Glue, Lacquertennis

A Wilson, Jack Kramer, Kramer Cup tennis racquet. Base of head features Wilson logo. Throat features rendered gold trophy cup device. Shaft features decal head and neck illustration of Kramer. Shaft and butt cap feature 'W' trademark. Leather handle grip features triangle-pattered perforations. Autograph by Kramer features along shaft on reverse. Materials: Wood, Nylon, Leather, Ink, Glue, Lacquer, Metal, Plastic, Paint, Ribbon, Adhesive tape, Stringtennis

A Dunlop Maxply, Vincent Richards International tennis racquet, with string whipping around shoulders plastic whipping around shaft, and a leather handle with diamond and triangle shaped perforations. On the obverse, the Dunlop Maxply trademark features across base of head and throat, above a 'Superb' Victor trademark. 'A Dunlop Production' logo features across the shaft. Model name, along with smaller decal of Dunlop Maxply trademark, features from the base of head down to the shaft, on the reverse. Dunlop 'D' trademark features on red butt cover. Materials: Wood, Nylon, Plastic, Ink, Leather, Glue, Lacquer, Metal, String, Enamel, Adhesive tapetennis

A wooden racquet. Inscription across throat of obverse reads: NARRAGANSETT/FIFTY. Company trademark across stem of obverse: NARRAGANSETT MACHINE CO./.../"LIVE-WOOD"/.../PAWTUCKET, [R.I.] Inscription along the throat of reverse: DRIVER. Company symbol (an arrangement of triangles and squares) in centre of stem of reverse. Company logo 'NMCO STANDARD' is stamped in gold onto red cloth butt cap. Materials: Wood, Glue, Lacquer, Ink, Leather, Metal, String, Gut, Clothtennis