These two boards were clipped on to the creased edge of trousers and the item stored in this way. They were used in lieu of irons in the days before electric irons. These items come from the household of the Angus family in Warrnambool. Dr William Roy Angus (1901-1970) studied medicine in Adelaide and Edinburgh. He practised medicine in South Australia and at Nhill before coming to Warrnambool in 1939. In later years he specialized in ophthalmology. The Angus family lived at ‘Birchwood’, a house now demolished. Dr Angus was very civic-minded and was active in a great number of community groups.These items are retained because of their connection to past years and because of their association with the well-known local Warrnambool doctor, Dr Angus. These are two rectangular pieces of wood with three metal clips on each. Two of the metal clips are badly rusted. Both pieces have printed material etched into the wood. A piece of string is attached to the end of each board.The Aveca (Patented) Trouser Stretcher and Presser The Aveca (Pat. Appd. For) Trouser Stretcher and Presser men’s accessories, history of warrnambool

Made for the opening of the W.J. Tyler store in Sackville Street, Port Fairy in 1901The hanger represents W.J.Tyler, an early business in Port Fairy which no longer exists.Wooden trouser hanger with black text and red felt lining. Wire hanging device hinged to open hanger.W.J. Tyler Merchant 'Phone 38 Port Fairy. Germanyhanger, trouser, advertising, tyler, port fairy

Belt webbing khaki trouser thinuniform, veitnam, army

Army Trouser Disruptive Pattern Combat Uniform (DPCU).uniform, present, army

Two long strips of wood with three detachable clamps. Instructions with diagrams are printed on paper on the reverse.The Avecta Trouser Presser and Stretcher PAT APPLIED FOR

Trouser buttons (7 large 4 small) (9 large at audit)badge/buttons, ww2, army

Post Vietnam sample uniformJacket and trouser set, camouflage drill uniform, tan, brown and green in colouruniform, camouflage

The Royal Australian Navy Uniforms are based on the uniform of the Royal Navy. They reflect traditions that can be traced back to the Royal Navy (England) and demonstrate the relationship between the two. These drill trousers are one of four parts to a Naval Ratings Uniform which was owned by J.M. Parsons.These trousers are one part of a naval ratings uniform which consists of four parts. The uniform is representative of the Royal Australian Navy uniform and can be traced to the Royal Navy (England). The complete uniform shows the connection between Australia and England since European settlement.Khaki long bell bottom trousers with seven quick release metallic buttons. Four of the buttons are lined up horizontally along the pelvis and another three fasten the trousers together in a liner pattern at the centre of the pelvis. There is a white square label sewn to the back/centre interior of the waistband with printed and written inscriptions. There is also a written inscription directly on the trouser fabric to the right of this label.Printed inscriptions on the label: KHAKI DRILL TROUSERS / FALL (indecipherable word) / Size: (indecipherable symbol) / Waist (indecipherable symbols) / INSIDE LOG: (indecipherable inscription) / H. R. (Indecipherable inscription) PTY LTD / indecipherable inscription Written inscription on label: JM PARSONS / (indecipherable inscription) 362 Written inscription on trouser fabric: J.M.PARSONS 14/362navy, naval ratings uniform, naval ratings collar, j.m. parsons, ran, royal australian navy, j parsons, parsons, military uniform, drill trousers, trousers

Belt, black, Sgt Hunt, ( in trouser pocket)(stored with tunic U447A, trousers U447B, tie U447I)uniform, 1971 to, raaf

Trouser presses like this were commonly used in the late 19th and early 20th centuries, particularly among wealthier households, military officers, and professionals who needed neatly pressed clothing. These presses worked by clamping trousers between two wooden panels and tightening them with screw clamps. The pressure and sometimes residual heat from ironing helped maintain a sharp crease in trousers overnight. Such presses were a cheaper and more accessible alternative to regular ironing, often used in hotels, gentlemen’s clubs, and military settings.The item is an antique wooden and metal trouser press, used to maintain the creases in trousers and keep them wrinkle-free. It consists of: A rectangular wooden frame, likely made of polished hardwood, featuring two flat wooden panels that sandwich the fabric. Two vertical metal bars with screw clamps, which allow the user to tighten the press and hold the trousers firmly in place. The screws at the top and bottom are manually adjusted, ensuring even pressure across the fabric. The surface shows signs of wear, with visible scratches, chipped varnish, and peeling fabric or padding underneath.trouser press, clothing, household item, iron

00088 Black Merchant Navy pollyester jacket, 8 gold buttons, Captains rank on sleeves with certificate 00088.1 Black Merchant Navy trouser.Melbourne Tailoring, 566 Elizabeth street Melbourne, 347 6844

"Captain C.J. Swatton"1. Jacket, woollen, black. Four front pockets. Top two held shut with brass buttons. Chest held shut with four brass buttons. Epaulettes have the 3 brass pips of a Captain. The button motif is for R.A.A.S.C. 2. Trousers, black, woollen. Red stripe on side. 3. Belt, woollen, black. Two pronged brass buckle.1. Written on lining, left arm is name "Swatton". 2. Written on inside of trouser pocket is "Swatton".c.m.f. services, uniform, army, captain c.j. swatton, passchendaele barracks trust

Items such as this clothes hanger were widely used throughout Australia from the late 19th Century onwards. Francis (Frank) Stuart (1844-1910), manufacturer and politician, was born on 21 May 1844 at Penrith, New South. At 13 Frank was apprenticed to a Sydney draper. In 1866 he moved to Melbourne where Stuart joined the fashionable Collins Street mercery store of Alston & Brown. In 1884 he joined McIvor & Lincoln; on the death of the senior partner, Lincoln Stuart & Co., clothiers, was registered as a limited company in February 1889; when Lincoln retired, Stuart became sole proprietor. Among the business’ early success was a contract to supply uniforms to the New South Wales Sudan contingent. Stuart recognized possibilities in the rubber industry and joined with Barnet Glass & Sons Co. to manufacture waterproof clothing; he became a director of the company which was later taken over by Dunlop. Stuart was president (1885) of the Victorian Chamber of Manufactures and chairman (1887) of the Clothing and Manufacturers' Association. In April 1889 he was elected to the Victorian Legislative Assembly serving until 1894. In June 1904 he was returned to the Legislative Council as member for North Melbourne. He resigned in May 1907 to have more time for business. Frank Stuart died in 1910 and the business was carried on by his son Frank Jr. The company was taken over by John Snow & Co. Ltd in 1926, but continued to trade under Lincoln Stuart & Co. until it was finally deregistered in 1994.This item is representative of a range of clothing items and accessories popular throughout Australia and provided by a renowned Australian clothier. A wooden, leather and metal trouser hanger. It is inscribed with information about the manufacturer on both sides. it is made of two lengths of wood, connected by a leather strap and a metal buckle.Side 1: Lincoln Stuart & Co. Pty. Ltd. Wholesale and Retail Clothier Side 2: Flinders St. Melbourne Made in Germanydomestic appliances, lincoln stuart & co.

Long dark trousers. Four buttons along the waist line, front and back. Five buttons along the front, only four are present. Leather on the inside of the trouser leg, front. Plastic Buttons trousers, long, dark blue, pants

Two trouser legs and soft pair of leather shoes descend steps, along with a white cane.B/W photograph of man walking down steps with white caneSkills Training - O&M A white cane provides blind people with early warning of obstacles 5A inset into Pic 5 CJ 481/C/4royald blind society of nsw, white cane day

Refers to the service of Lt.Col. "Roy Shadforth".1. Red waist jacket, white collars and white cuffs. 38 BN. R.V.R. Badge (Gold) on collars. Epaulettes show gold Lt.Col. badges and gold A.M.F. buttons. It has one interior pocket. 2. Red sleeveless vest. 4 brass (Gold) buttons, AMF motif, lined with a faint light cotton. 2 exterior pockets. 3. Shirt, short sleeved - off white. polyester cotton, 6 clear buttons, one breast pocket. 4. Black bow tie with plastic mount. 5. Trousers, woollen, black. Red pin stripe on outside legs. Lined with same cotton as vest. Straps at bottom of legs to hook up under feet.1. Written inside one arm pit is “Shadforth” 2. Written inside vest is “Shadforth” 5. Written on trouser pocket is “Shadforth”post ww2, cmf, uniform, roy shadforth, passchendaele barracks trust

(201.1) Wooden trouser hangers like this were commonly used in the early to mid-20th century before plastic hangers became widespread. It was likely given as a promotional item by Allan Bros., a drapery and clothing retailer in Horsham, which suggests it was used in department stores or home wardrobes. This is a vintage trouser or skirt hanger, used to hold and store garments without causing creases. The spring-loaded wooden clamp securely grips the fabric, preventing items from slipping off. The metal wire loops may have been used for extra tension or securing additional garments. (201.2) These types of collapsible hangers were commonly used in the early to mid-20th century, especially for traveling wardrobes or military use, where compact storage was essential. They were popular in the 1920s–1950s, particularly before lightweight plastic hangers became widespread. This is a portable, space-saving clothes hanger, designed to be folded for easy storage or travel. The fabric-covered upper bar helps prevent delicate garments from slipping or getting creased. The lower wire arms suggest it was meant for multi-purpose hanging, such as trousers, skirts, or accessories.(201.1) This is a vintage wooden trouser or skirt hanger, featuring a spring-loaded wooden clamp and a metal hook and wire support system. The main components include: A wooden clamp mechanism, which consists of two flat wooden bars hinged together at the top with a metal fastener, allowing them to press tightly onto a garment. A metal hook at the top, designed for hanging in a wardrobe or on a rail. Two metal wire loops extending from either side of the clamp, possibly for additional support or tension. Printed branding on the wood, indicating it was produced or sold by Allan Bros., Drapers, Horsham. (201.2) This is a vintage collapsible clothes hanger, made primarily of metal wire and fabric. The main features include: A metal hook at the top for hanging on a rail or rod. A folding wire frame, allowing the hanger to collapse for compact storage or expand to hold garments. A fabric-covered upper bar, likely intended to provide extra grip or protection for delicate fabrics. Two lower wire arms extending outward, possibly designed for hanging trousers, skirts, or accessories. The metal wires appear slightly rusted, indicating age and prolonged exposure to moisture or use.(201.1) "ALLAN BROS. DRAPERS, A. P. CRESWICK, HORSHAM" , (201.2)clothes, hangers, household item

Containing 2 x 3 ribbon bars, 1 AIF button, 1 Returned from Active Service badge, a number of trouser buttons(B981 in Army17 box), 1 US Marine Corps hat badgeephemera, ww2, army

Vernon Holt was a boyhood friend of Frank Wright. Frank Wright was a renown resident of Smeaton, where he was born on 2 August 1901. He lived at Laura Villa, and attended Smeaton State School. His father William was a gold miner and his mother's name was Sarah. Their family won many singing and instrumental awards. Frank was tutored by Percy Code and was awarded a gold medal for the highest marks in the ALCM examinations in the British Colonies at the age of seventeen years. He became the Australian Open Cornet Champion by the age of eighteen. A year later, Frank conducted the City of Ballarat Band, and later the Ballarat Soldiers’ Memorial Band. He formed the Frank Wright Frisco Band and Frank Wright and his Coliseum Orchestra. These bands won many South Street awards, and Frank as conductor won many awards in the Australian Band Championship contest. In 1933 Frank Wright sailed to England to conduct the famous St Hilda’s Band and was later appointed Musical Director of the London County Council, where he organized many amazing concerts in parks, in and around the London district. He was made Professor of Brass and Military Band Scoring and conducted at the Guildhall of Music and Drama. Frank was often invited to adjudicate Brass Band Championships around Europe, in Australia, including South Street and in New Zealand. The Frank Wright Medal at the Royal South Street competition is awarded to an individual recognized as making an outstanding contribution to brass music in Australia.Black and white photograph of a young man dressed in a light coloured suit with long socks pulled over his trouser legs to the knee. He is carrying a cap and is standing in a clearing with trees and bush behind. The man is Vernon Holt.vernon holt, frank wright

Wooden ironing boards for use by Tailors L7.1 Sleeve board in shape of a sleeve, 67 cm long L7.2 Trouser board, 70 cm long, rounded at end. L7.3 107 cm long, sider on one end

Piece of material from khakhi trouser leg with hand written letter . Written by private Aubrey Neil on the Galipoli 23.07.1915. Sent to Miss N. Neil, Mullum Mullm Rd Ringwood, Victoria Australia . Double sided item

Army pilots flying suit, flash proof. Eppelet - Captain Brass zipper / 100% Polyamide . Left sleeve vertically zippered pocket with double pen pocket. Shirt has a pair of buttoned pockets. Shirt separate from trouser. Black BootsMarkcrow Scovill (Zipper inscription)uniform, flying suit

Cloth sample book: "City & Guilds Exams 1914-1915 Patterns" has 35 grey and black cloth samples (1 space is blank). Pages entitled: "Range 1 & 2 Tropical Suitings" (5 samples); "Ranges 3 & 4 Suitings" (6 samples); "Range 5 Suitings" (3 samples)/ "Range 6 Vestings" (3 samples); "Range 7 & 8 Vestings" (7 samples); "Ranges 9 & 10 Trouserings" (5 samples); "Ranges 11 & 12 Trouserings" (6 samples);City & Guilds Exams 1914-1915 Patterns (ink)weaving textile industry textile design textile industry - education, weaving, textile industry, textile design, textile industry - education

This style of trouser was worn by light horse soldiers. The jodhpurs were adapted from an ancient style of Indian trouser called the Churidar, which is tight around the calf and loose at the hips. It was adopted by British troops serving in India during the 18th century especially for sport. A British version was soon being produced by Savile Row tailors in London. The use of the Indian-style, ankle-length Jodhpurs allowed riders to use short, less expensive boots, as their calves were protected by the reinforced design and snug fit.Pair of Jodhpurs of the type most recently worn by 8/13 Victorian Mounted Rifles Light Horse Heritage Troop.jodhpur, uniform, light horse