Document titled "Joining of tramway rails by arc welding (Kirby Joint)" has a table of contents. Prepared by the Public Transport Corporation, 1998. Includes notes on safety, materials, instructions, weld preparation and cooling, grinding, records and equipment.Yields information about the Public Transport Corporation of Victoria about the welding of rail joints.Document - approx 27 loose A4 sheets.design, ptc, tramways, civil engineering, construction, welding

Photocopy of an article in the State Electricity Commission of Victoria Magazine, Contact, Vol 1, No. 4, Feb 1937 titled "Electricity Supply and Tramways / Reconditioning the Tramway Systems at Ballarat and Bendigo". Each item had a thin strip of paper attached by staple to the top left hand corner, giving the Vol. No. details. The item gives the background to the takeover from ESCo. Details some of the work undertaken in both Ballarat and Bendigo, including the widening of double track in McCrae St to 10' to allow ex MMTB trams to run. Work at Grenville St - City Loop, the method of track laying in Ballarat - concrete stringers, welded joints, financial arrangements for the work - employment council. Includes replacement of trolley wire. Features photos of reconditioned track on the Eaglehawk Route and a caterpillar tractor. Record revised 31/3/2019 to replace images with those from Andrew Cook CD and to include item .1 .1 - Item also was originally printed with different photographs in the Electrical Engineer and merchandiser Sept 15 1936. See Reg Item 2968i5.pdf. Copy provided on heat sensitive paper.trams, tramways, sec, reconstruction, trackwork, mccrae st, grenville st, esco

Paper by Dudley Snell, MMTB Chairman, read to the Hong Kong Section of the Institute of Engineers in 1986, titled "The Melbourne Tramway System - Some Reflections", looking at the history and practice of tram track construction in Melbourne from cable tram days to the 1980s methods. Has diagrams of the various types of track used, rails, sleepers, concrete, joints, slab depth, drainage, rail type, BHP rolling of grooved rails, alternatives to grooved rails, and the impact of thermite welding on joint noise. Noise issues addressed through resilient wheels, brake rigging, use of moulded composite brake shoes, the development of the Kirby joint, Yields information the Melbourne tram system and demonstrates the type of information retained about the tramway system.Set of nine A4 sheets photocopied. Has been stapled in top left hand corner.trams, tramways, melbourne, history, ptc, mmtb, track construction, new track, thermit welding, kirby joint

Colour photograph of John Phillips welding a track joint just before the Carlton St. terminus, watched by Barry McCandlish on 30/1/1993. Photo by Richard Gilbert. On Kodak paper. See March 1993 issue of Fares Please! for another photograph and the story on page 8. See March 1993 Fares Please!trackwork, wendouree parade, carlton st., welding

Third Annual Report of the Footscray Tramway Trust, for the year ending 30/9/1919. Lists the Trust Members, Consulting Engineers, and Secretary. Details the Trust's activities, finances, and a short review of activities noting the supply of energy from the Victorian Railways Newport Power Station. Engineering report by Christie & Gardiner detailing the construction, welding of joints, tar surfacing, substation equipment, fitting equipment to the seven ex HTT tramcars at Footscray, delivery of equipment for the tramcars, but a delay in the delivery of the trolley wire. There are four pages of accounts and one page for the Auditor's statement. The Trust was taken over by the MMTB during Feb. 1920 who completed the work and commissioned the tramway.Yields information about the construction of the Footscray Tramway Trust tramways.Eleven foolscap sheets, duplicated, pinned with a removable foldable clip in top left hand corner. Two copies held.tramways, tramcars, ftt, footscray tramways trust, new tramways, rails, tramway construction, annual reports, htt

Set of 23 photographs taken by Carolyn Dean between 6/3/1999 and 16/4/1999 of the Begonia Festival operations and moving the ex SEC bike shed to Bungaree. On Kodak paper. 1094.1 - Group of tramway staff at Gardens Loop - used in May 1999 Fares Please! .2 - tram 40 at loop .3 - sign boards used in 1999 Begonia festival .4 - Welding joint 2-3 road - Warren Doubleday and Gary Wood .5 - ditto with Alastair Reither .6 - Fixing fence at Bungaree - John Phillips .7 - ditto .8 - ditto .9 - site for the hut to go at Bungaree .10 - ditto .11 - treated pine posts for stumps .12 - checking the layout - John Phillips .13 - cutting fire wood .14 - trimming trees .15 - Dismantling the roof on the shed at Ballarat East - John Phillips and Simon Jenkins .16 - roof off .17 - ditto .18 - the moving team - used in May 1999 Fares Please - see caption for people .19 - Lifting the shed out of position .20 - ditto .21 - ditto .22 - surveying the foundations - Peter Winspur, John Phillips and Alastair Reither .23 - ditto .1 > .3 - 6/3/1999: .4 & .5 - 7/3/1999: .6 > .13 - 20/3/1999: .14 - 21/3/1999: .15> .23 - 16/4/1999 See also Reg. No. 1095 and 1101 for next stage of the move. On rear of each photo in blue ink is date in the upper edge and on lower edge "Photo by Carolyn Dean"btm, sec bike shed, begonia festival, track repairs, tram 40

Series of 15 black and white photographs of the track works to reconstruct tram lines showing various methods and works during the 1960's. .1 - Jackhammers concrete out around wooden sleepers - the rails have been bolted to them. .2 - Excavated track or temporary track next to newly relaid track - Hawthorn Road by Caulfield Park? .3 - Partly completed work - nearest track relaid, second track still has wood blocks? and then a temporary track. .4 - Excavated previously concreted and bolted track. Appears to be new rail. .5 - Compacting a new track bed with work laying track in the background. .6 - Rail being craned into position onto small concrete blocks - Nicholson St North Fitzroy at Church St - the church is now Melbourne City Mission Palliative care centre. 1955/56 - construction of the replacement track. Note the Hail bus stop sign on the corner. .7 - Thermite welding being set up. .8 - after a Thermite welding joint completed. .9 - track reading for pouting concrete, with a rebuilt track alongside and temporary track on the other side. .10 - ditto .11 - Concrete being poured .12 - ditto - could be Maribyrnong Road bridge replacement. .13 - Screeding off the concrete - possibly Nicholson St North Fitzroy .14 - completed surface - location as above .15 - completed surface with cloth covers to assist the concrete being cured. Has a MMTB hut and two worker amenity buses alongside. - location as above.Some photos have pencil marks on rear.trams, tramways, trackwork, rails, track materials, track repairs, sleepers, equipment, concrete, welding, nicholson st, new tramway, buses

Newspaper cutting from the Letters to the Editor Section of The Courier, Ballarat dated Friday 2/8/2002 regarding the reintroduction of trams to Ballarat. Has a photo of Allan Snowball working (welding) a rail joint in Wendouree Parade. Letter to the Editor titled - "Lake tram may be way to go" - written by Graham Jordan questioning the City Tramway proposal. Letter to the Editor, by William J Hoath titled "Who will subsidise cost of the trams", questioning who would pay when no one is on the trams and what is councillors position on this?ballarat revival, letter to the editor, ballarat city tramway, lake wendouree tramway

Photograph by Ron Hood shows the SECV welding truck at the Ballarat Lydiard St level crossing with No. 43 passing on its way to Lydiard St North, December 1970. The welding truck was provided with a trolley pole to power the equipment in order to weld or repair rail joints. Photo taken from the Provincial Hotel. Has the level crossing, Kennedy Murray General Carriers and the Ballarat Goods shed in the view. In the far distance is a SECV truck. See items 2864 and 7700 for other photos of the welding truck.Yields information about the use of the welding truck in Ballarat to repair rail joints or the head of the rail.Set of two colour slides in hanimount cardboard mounts."Ballarat" in ink on one of the slides.tramways, trams, tram 43, level crossing, welding, trucks

Yields information about the track maintenance activities of the track gang in Ballarat, the work they did, notes, names and other information.1958 Woods' Australian Diary, No. 21, 3 days on a page, John Andrew and Co. red Rexene binding, card covers, sewn sections with ruled sheets providing a diary for 1958. Has "useful information" sheets at from the diary, including a ruler along the side of the sheet. Used by the SEC Ballarat track gang to record their daily work, leave, welding, track cleaning, truck driver etc Rear pages - has notes on materials used and a list of Track gang for 1958. (December Cash Account) E. A. Goldsmith W. H. Goldsmith E. J. Davis G. McQuinn H. Hoy A. W. Cunningham N. McVitty C. Edwards E. Lakey H. Lancaster S. Chibnall H. Smith Loose contents 21/7/1958 - SEC Safety Officers Newsletter, Feb. 1958 - inside has notes and sketches where joints welded and the dates. Inside rear cover - Daily time sheet - with the addresses of the track gang on the rear. - list of materials - rails by type and sleepers on hand - Reg Item 3705 - Rules Governing Depot Employees with notes and sketches where joints welded and the dates on the rear. (Item to be stored in a separate envelope - note was folded in half and stored in the rear section)tram, trams, sec, ballarat, depot, trackwork, rails

Yields information about the track maintenance activities of the track gang in Ballarat, the work they did, notes, names and other information.Collins Australian Diary, No. 324 printed by Collins Bros, dark red card covers, sewn sections with ruled sheets providing a diary for 1967, one week per double page. Has "useful information" sheets at from the diary. Used by the SEC Ballarat track gang to record their daily work, leave, welding, track cleaning, truck driver etc Loose contents 18/6/1967 - SEC Sub-Requisition - weld two VR rail joints, Doveton St level crossing 9am Sunday 25/6 2nd last page - note re leave entitlements and work over the Christmas period. Mark Clough Wiseman Weightman Smith Palmer Rose Blake Inside back cover 1. - Sub-requisition for tree cutting 2. - Memo dated 18/8/1966 re electrolysis and welding and testing of joints to Reg Item 3707.. 3. - memo dated 29/11/1967 re tree clearing in Bungaree 4 - Sub-requisition re truck use re tree clearing 5 - Weekly time sheet for R. Palmer - Track cleaner, dated 29/12/1967. 6 - Four requisitions for undertaking non tramway work 7 - List of invitees to a SEC safety coittee meeting - on rear a list of names and leave owing. tram, trams, sec, ballarat, depot, trackwork, rails, scrubber tram

Yields information about depot activities of the BTPS in building the depot fan and access track.Set of 10 Agfa blue and white plastic mounts - 27mm square slides or 35mm slides of BTPS workers, c1973/1974 preparing rail joints or welding them. .1 - welding access track .2 - setting up to weld track .3 - welding access track .4 - installing fish plates prior to the extension of 2 road across the level crossing - Noel Gipps .5 - Cutting Rail - Noel Gipps and Barry McCandlish .6 - Cutting Rail - Noel Gipps, Barry McCandlish and Bill Kingsley .7 - welding track across the curve in Wendouree Parade .8 - ditto with Richard Gilbert and Noel Forster .9 - welding track across the curve .10 - dittoVarious notations by John as to the slide number and the trams in pencil and ink.tramways, trams, btps, depot, trackwork, wendouree parade

Moulding Plane: A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. Auburn Tool Company: The Auburn Tool Company is known to exist from 1864 to 1893. George Casey reorganized the firm of Casey, Clark and Company as a joint-stock company in 1864, under the company name of Auburn Tool Company. The 1865 New York State Census noted the firm as a manufacturer of the plane, plane irons, and skates. The production that year was listed as 30,000 pairs of skates and 35,000 planes along with 25,000 dozen plane irons. The plane irons carried the trademark "Thistle". Both skates and plane irons were made from welded wrought iron and cast steel. The Auburn Tool Company was among the five leading plane manufacturing firms existing in the mid to late 19th century USA. Others were: H. Chapin's Son; Greenfield Tool Company; and Sandusky Tool Company. Auburn Tool Company, with these others, was also a founding member of the Plane Makers Association, organized around 1858 to fix prices. Most of the companies tools were manufactured by prisoners and in 1866 the firm was outbid for prison labour by J M Easterly and Co. After losing the contract with the prison authority they constructed a new building and continued in the plane manufacturing business with private labour. The 1870 US Census reported the firm had 21 machines, driven by water power, employing 66 males, producing annual products valued at us$70, 000. After A. Howland and Company was dissolved in 1874, the Auburn Tool Company again resumed using contract labour at the State Prison until 1877. The Auburn Tool Company merged with the Ohio Tool Company of Columbus, Ohio, on Nov 14, 1893. Although plane manufacturing was continued at Auburn until after 1907, after this merger the firm went under the name of the Ohio Tool Company. A significant item from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture was made predominately by hand and with tools that were themselves hand made shows the craftsmanship used to make such a unique item. It also gives an insight into how many manufacturing companies bid for the rights to use prison labour to make their products at this time in our history. Decorative wood Moulding, plane Round type Auburn New York. Owner A Neudt Size 14 flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Document titled "Joining of rails by aluminothermic welding" , also known as Thermit welding. Has a table of contents. Prepared by the Public Transport Corporation, 1997. Includes notes on safety, materials, instructions, weld preparation and cooling, grinding, records and equipment.Yields information about the Public Transport Corporation of Victoria about the welding of rail joints.Document - 12 loose A4 sheets.design, ptc, tramways, civil engineering, construction, welding

Document titled ""Joining of rails by flash butt welding" with a supplementary document titled "Control cooling of flash butt welds for 60kg AS head hardened rails" Has a table of contents. Prepared by the Public Transport Corporation, 1997. Includes notes on inspection, heat treatment, weld tests, rail ends, destressing, storage and handling.Yields information about the Public Transport Corporation of Victoria about the welding of rail joints.Document - 20 loose A4 sheets.design, ptc, tramways, civil engineering, construction, welding

Colour slide of BTPS Welding track depot access road, 5/1/1974" - photo by David Frost. Shows the extent of the excavation near the level crossing and the mound of removed top soil on the right-hand side of the photograph. There is a group of workers, probably ballasting the access track.Yields information about BTPS access track construction in 1974.Colour Slide - Kodak Cardboard mount"Welding track depot access road Jan 05 1974" in ink.tramways, btps, trackwork

Photo shows Geelong 38 south bound to Belmont and welding truck - Moorabool St between Myers and McKillop Streets. The welding with the power supply from the overhead would most likely be repairing a broken joint. One of a set of photos was taken between 15/2/1956 and 3/3/1956 when services operated only between Belmont and North before the final closure of the Belmont route on 25/31956 and that bogie tram 31 is not shown on the board, having gone to Ballarat on 15/2/1956 - see item 5554. See item 8213 for an article on the Geelong system by Keith Kings. Yields information about the Geelong operations toward the closure of the tram system.Black and white Negative - 120 sizetramways, geelong, tram 38, moorabool st, welding truck, track repairs

Showing how tramway electrical current was returned to the electrical sub-station via the rails.Demonstrates an earth return bonding piece.Traction Return Current Rail Bond, consists of a multi strand copper cable abt 19mm dia. and 530mm long, with block of steel (25x25x43mm) brazed onto each end. The block of steel gets welded to the outside of the rail head at or near a joint in the rails. The bond is to ensure a reliable return current as the fishplates and bolts are subject to dirt and rust which can inhibit the current.tramways, electrical engineering, earth return, bonds, trackworks

Photo taken by Ben Parle 8/4/1958. Photo of the SEC Ballarat Ford welding truck, at the intersection of Macarthur St and Wendouree Parade, View Point Junction. Note tram stop signage. Three SEC workers in view, with road signage set up and truck connected to the overhead for welding work. Note bicycle leaning against truck. Welder - Weld. See Reg Item 7700 for another photo of the truck in the Power Station yard and 10003 at Lydiard St level crossing. For high resolution scan see btm2864.tif Yields information about the use of the SECV welding truck to repair rail joints or the rail head.Kodachrome Transparency - 35mm slide - cardboard mount, with one side with red border and words "Kodachrome Transparency / Processed by Kodak" top and bottom."Drummond St. and View Point Junction Ballarat" / "8-4-58". Has slide No. "5" stamped in black in top corner.tramways, trams, rails, welding, trucks

Demonstrates an aspect of the BTPS works on the provision of the access track - welding joints and photographs of volunteer workers.Black and White photograph of Richard Gilbert and Geoff Cargeeg on the access track, with a "Danger Do not look at Arc" welding warning sign in front - c1974.tramways, trams, trackwork, access track, welding

Set of 20 digital images of Bendigo Tramways December 1970 by Stuart Lodington. .1 - Bendigo track gang renewing a joint, McCrae St, with welding truck alongside and Birney No. 29. .2 - No. 5 at Quarry Hill terminus? .3 - No. 24 at the depot .4 - No. 2 on the Quarry Hill line .5 - No. 5 approaching the Eaglehawk terminus .6 - No. 29? at the Golden Square Terminus with Bill Rodda's Golden Square hotel in the background. .7 - No. 3 inbound on the Quarry Hill line. .8 - trams crossing on the Eaglehawk line, through the window of one tram. .9 - side on view of a B23D controller in a bogie tram .10 - No. 5 at the Eaglehawk terminus .11 - No. 21 at No. 21 crossing on the Golden Square line. No. 29 showing special, No.21 - North Bendigo, Fire Station Loop? .12 - No. 29 and another tram - near work site? .13 - interior view from Birney looking at the front of another tram parked behind. .14 - No. 29, No. 6 crossing at .15 - No. 6, showing special at Charing Cross. .16 - No. 5 and another tram at North Bendigo on a Special .17 - No. 28 at Charing Cross .18 - No. 5 on Special at a Loop on the Eaglehawk line .19 - No. 28, and two other trams at the Myrtle St Loop .20 - No. 18 showing Quarry Hill and two other trams on View St.trams, tramways, bendigo, trackwork, mccrae st, depot, quarry hill, eaglehawk, golden square, controllers, north bendigo, view st, tram 29, tram 5, tram 24, tram 2, tram 3, tram 6, tram 28, tram 18

Yields information about the track maintenance activities of the track gang in Ballarat, the work they did, notes, names and other information.Invicta Australian 1957 Business Diary, No. 4, printed by Sands and McDougall, light brown Rexene binding, card covers, sewn sections with ruled sheets providing a diary for 1957, one week per double page. Has "useful information" sheets at from the diary. Used by the SEC Ballarat track gang to record their daily work, leave, welding, track cleaning, truck driver etc Rear pages - has notes on materials used. Loose contents 1 - 18/11/1957, note dated 26/9/57 to track foreman re work at the Cooling Tower, B station. 2 - 23/12/1957 - envelope address to H. Smith Tracks - with Yallourn Briquettes sales department logo and address details. 3. - Inside rear cover - plan of hospital corner - showing plan of broken joints? tram, trams, sec, ballarat, depot, trackwork, rails

Yields information about the problem of electrolysis in Ballarat due to poor track joints and other problems., Yields information about the problem of electrolysis in Ballarat due to poor track joints and other problems.Carbon copy of a typed memo from the Works Superintendent to the Branch Manager of the SEC Ballarat regarding Electrolysis - poor earth return and the possible reasons for this. Memo suggests that track welder should be trained to test and the time and cost to test and repair the system. Memo dated 18/8/1966. On rear has various notes in ink. Was located with item 3701 - 1967 Trackwork diary.trams, tramways, sec, trackwork, electrolysis, welding

Letter dated 24/2/1916 from F A McCarty HTT Engineer and Manager to Jas R Henderson, Construction Engineer PMTT about the supply and possibly welding the bonds between track joints to ensure electrical continuity.Has a close association with the two engineers named and their correspondence re working.Letter typed on HTT letterhead watermarked - "Sovereign Ultra Strong" and "British Made"tramways, htt, pmtt, electrical engineering, track work.

1. Bag, Carrier, Dixie set. Khaki canvas, leather straps at back. Single ring on rear panel. The lid is held down with a signle strap. The mounting button is missing from the front panel. Shape is half circle. 2. Half circle Dixie Tin with soldered joints. It has 4 little buckles (front, back and sides). It has an "Ad Hoc" brass handle - looks like 1/8" welding rod. 3. Tin lid, rolled edges, Half circle, internal mounted that folds out.1, Stamped inside are; 395. AAO?V. 49.JNF 10-12.ww1, mess equipment, dixie cooking set

Set of five colour photographs of the repair of northern end of Wendouree Parade. Photos taken on 5 and 6/4/2003, printed on AGFA paper. 2557.1 - The general scene with the new kerb and channel on the north side - backfilling around the sleepers 5/4/03. 2557.2 - Packing between the sleepers, Len Millar, Sam Boon and Richard Gilbert 5/4/03. 2557.3 - Welding track bonds - Paul Mong 6/4/03 2557.4 - Packing the broken joint area - Simon Green, Alan Snowball, Gary Wood, Bryan Hill, Paul Mong and Peter Winspur with No. 8 in the background. 6/4/03. 2557.5 - Testing the track with No. 8 - Garry Wood and Sam Boon.trackwork, wendouree parade, track, tram 8