Showing 2285 items matching tools-and-equipment
Container (1217) Equipment (1881) Functional object (4007) Instrument (404) Machine (358) Tool (1465) Vehicle (150) Weapon (457)-
Numurkah & District Historical Society
Equipment - Rechabite Seal
This Common Seal is the only one of its type with 'Numurkah Tent'.Cast iron lever pressNumurkah Tent / No 255.V.D. No. 82 S.U / I.O.R / Numurkah rechabite, common seal, numurkah, temperance -
Flagstaff Hill Maritime Museum and Village
Instrument - Compass section, pre 1970
This compass section was recovered from the tug MELBOURNE, wrecked in Port Phillip Bay, Melbourne, around 1970.Tri-stand, metal, black, with hinged metal piece attached. Part of a binnacle or compass. Recovered from the tug "Melbourne" wrecked in Port Phillip Bay 1970. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, compass section, tug melbourne, shipwreck melbourne -
Flagstaff Hill Maritime Museum and Village
Instrument - Balance Scale, Henry Crane (Crane Foundry), 1870-1900
The Crane foundry opened some time before 1827 and was known as Atherton’s Foundry, run by James Atherton and Henry Crane. Initially it was a brass foundry, but by 1827 iron castings were also produced on the site. The main products were castings for the building industry, ironmongery and brassware. In the 1830s castings for the hand tool and lock industries were added to the product range and by 1836 Henry Crane had taken control of the business. The company became known as the Crane Foundry in 1847 with its own registered trademark. By the 1850s iron weights were produced, and a design was registered in 1872 with roundels decorating the edge. Brass weights were also produced, mainly after the regulation of 1890 that required weights of 2oz. or less to be made of brass. In the early 1900s the foundry began to produce castings for electric motors and continued to do so throughout its life. The Crane family continued to control the company until 1917 when William Cyril Parkes of lock makers Josiah Parkes & Sons Limited, Willenhall became a majority shareholder. Things were going well until the company’s liabilities spiraled out of control with the rise in electricity and gas prices along with the loss of two of the company’s largest customers. The factory went into liquidation and then closed in 2006 an end to one of Wolverhampton’s oldest companies.An item made by one of England's foundry’s based in Wolverhampton that exported items all over the world for many years. The scale gives a snapshot into the commercial life not only of England by Australian colonial life before Federation.Beam scale with three weights (4lb, 2lb, 1lb), metal tray, corrodedMarked on 2lb weight "Wolverhampton Crane Foundry" flagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, scale, beam scale, pounds and ounces, imperial weight, grocers scale, domestic scale, henry crane, crane foundry -
Bendigo Military Museum
Instrument - Universal Stereoscope, 1940
The Universal Stereoscope was used to view overlapping stereo aerial photography in three dimensions (3D). It consists of magnifying lenses, an optical train including glass prisms and mirrors that are protected by sliding metal covers all suspended on a pair of fold out adjustable legs. The stereoscope is coloured military olive drab green. This Universal Stereoscope was produced in Australia in 1940 for Military use. It was originally produced with a timber protecting carry box that is missing. It was used extensively by members of the Australian Survey Corps during WWII in many theatres of War for viewing and annotating aerial photography. Item 6205.6P, photograph 6205.1P shows the Universal Stereoscope in use by the Australian Survey Corps annotating aerial photography.The Universal Stereoscope was used to view overlapping stereo aerial photography in three dimensions (3D). It consists of magnifying lenses, an optical train including glass prisms and mirrors that are protected by sliding metal covers all suspended on a pair of fold out adjustable legs. The stereoscope is coloured military olive drab green."DC-1940 Serial No 550", "D V D", "Made in Australia" Plate on the underside reads " This stereoscope was donated to the Ex Fortuna Survey Association by the Eaglehawk Recycle Shop February 2015"royal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr -
Vision Australia
Equipment - Object, White screw together three piece cane
This white cane consists of three wooden parts that screw into each other to form the straight cane. The top section has grooves to indicate the top of the cane as well as a hole, through which the user could attach a rope or elastic cord to ensure the cane stayed in hand.3 pieces with screw connections that form a white caneorientation and mobility, equipment -
Flagstaff Hill Maritime Museum and Village
Instrument - Set Square, 1930-1955's
This set square was used in the planning and making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. James Bernard Williams was known as Jim Williams, born 1888 at The Forth and died 1959 in Warrnambool. He was a passionate ship model builder. Jim left school at the age of 14 years to work at the Don Store in Ulverstone, Tasmania. He played piano at the silent pictures. He enlisted and fought in France along with his two brothers and was wounded there. On return to Tasmania he found it difficult to get employment. He moved to Warrnambool and worked in the menswear department at Cramond & Dickson clothing store, corner of Timor and Liebig streets, until the Depression, when he lost his job. After some time unemployed and working part time until 1932, Jim was employed at Fletcher Jones Menswear in Warrnambool. In 1957 Fletcher Jones invited Jim to write out a list of the most interesting details of the ship model Sovereign of the Seas, with the view of displaying the model and the information for a short time in the factory and then move it to the display window of the Fletcher Jones shop in Warrnambool. Jim worked there for 27 years until just before he died in 1959. His Retirement Speech letter and a Staff Photo from Fletcher Jones are included with the donation. ABOUT JIM’S MODEL MAKING For many years Jim worked on his model ships, including The Endeavour and The Sovereign of the Seas. He had a table set up in a bay window and worked on them on and off using a jeweller's eye glass on the finer pieces. He was a real perfectionist and would re-carve pieces many times until he was happy with the results. This set square is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This set square was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Set square; thin, flat metal blade with rounded corners set at a right-angle into timber stock using three rivets, each with a diamond shaped surround. There is a remnant of red paint on the timber and signs that the set square has been well used. This set square is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship model sovereign of the seas, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, measuring instrument, technical drawing instrument, set square, carpenter’s square, drawing instrument, drawing tool, technical drawing tool, sovereign of the sea, ship model, hobby, ship model tool, english war ship -
Whitehorse Historical Society Inc.
Equipment - Scissors
Small brown embroidery scissors with markings on handle.domestic items, sewing -
Ringwood RSL Sub-Branch
Equipment - spoon fork and knife set
aluminum knife spoon and fork clipped togetherD. Digby service number 2189361 -
Stawell Historical Society Inc
Instrument - Musical Instrument
Upright Wooden Shipboard Piano stawell -
Bendigo Military Museum
Equipment - SIDE PACK WW2, C.1930’s
From WW2 Model side pack of haversack, light khaki colour cotton webbing with brass buckles.hand written in ink on inside flap “Vx103705 / CPL Herbet Bacon / Epsom Vic/"military equipment - army, containers, side packs -
National Vietnam Veterans Museum (NVVM)
Equipment - Oven
Steel upright cooker with flat bi-fold hinged lid, handles. Comprising cabinet, cooking utensils (egg slide, ladle, rolling pin), petrol operated burner belowRange 4range cooker, cooker -
Queenscliffe Maritime Museum
Equipment - Oars
Just off Port Phillip Heads on April 12 1936, a strong wave struck the Nairana, tipping her over for two minutes before she righted herself again. During the horrifying two minutes, four people were drowned, and eight people were injured. The ship was reportedly carrying roughly one tonne of concrete in the hull when she tipped. Reports from the local papers said that it was a tidal wave meanwhile others were saying it was either an earthquake or a total lie. A later paper said that the ship had been caught in a rip at the mouth of the bay, causing the tragedy. The S.S Nairana, was sold for £4,000 (over $170,200 in today’s money!) in 1951 after two years of being stranded on the beach at Port Melbourne, when the moorings broke one night during a storm and drifted ashore, causing her to wreck.After WWI in 1920 she was decommisioned as a seaplane carrier and returned to her Australian owners crossing Bass Strait until she was laid up in 1948.Pair of oars from the Nairanaoars, ss nairana -
Ringwood and District Historical Society
Equipment - Printers Blocks, Borough of Ringwood - Printers Blocks for Land Sales (Notice, and Plan). c1850s-60s, 1858
1 Text readsWitness Our Only and Well Beloved Son Sir Henry Berkly Knight Commander of the Most Honourable Order of the Bath, Captain General and Governor-in-Chief of our said Colony and --------- of the same, at Melbourne, Victoria, aforesaid the Eleventh day of May and the Twenty First Year of the Reign and in the Year of Our Lord One Thousand eight hundred and fifty eight.1 Printers block no. top left 1598 Heading : VICTORIA - LAND PURCHASE 2 Printers Block Borough of Ringwood -
National Vietnam Veterans Museum (NVVM)
Equipment - Equipment, Army, Radio
AN/PRC 9 Radio Setradio, an/prc 9 -
Ringwood RSL Sub-Branch
Equipment, Joyce BrosA, 1944
Brown canvas kit bag 1944Joyce Bros Pty Ltd 1916 -
The 5th/6th Battalion Royal Victoria Regiment Historical Collection
Equipment - Explosive Ordnance-Inert, Cannister Cartridge 84mm DRILL
Empty canister used for carrying ammunition for 84mm Carl Gustov MDFSWGreen, circular cardboard canister with canvas straps and metal fixings. The cannister has been certified empty and has a label affixed to it to prove it as such. -
National Vietnam Veterans Museum (NVVM)
Equipment - Equipment, Army, 1965
Personal petrol one burner stove with three swing out feet, and three swing out grate arms. Petrol tank at baseStove Gasoline burner M-1950stove -
National Vietnam Veterans Museum (NVVM)
Equipment - Equipment, Army, Camouflage Cream
Khaki cylinder containing camouflage face paint of light green and sand colourFSN 8510/161/6202camouflage, sas -
Federation University Historical Collection
Instrument - Telegraph Relayer, Electromagnetic Relay Device, c1870-1893
This item was probably acquired for, and used by, participants in telegraphy at the Ballarat School of Mines courses between 1873 and 1893.An electromagnetic relay device on a brass base plate, and mounted onto a wood base. It is covered by a removable wood-framed glass sided cage. The item has four terminal posts and an adjustable conductor mechanism.ballarat school of mines, telegraphy, relay device, telegraph coding -
Bendigo Military Museum
Equipment - CLIP
Item re Frederick Gardner DAVEY DFC No 410533 RAAF. Refer Reg No 3536P for his service details.Grey metal spring loaded clip with serrated jaws. A brass cylinder is attached. The object is possibly part of a gas mask.Stamped on cylinder: A M 6D.526 MKIVgas, masks, military -
Federation University Historical Collection
Instrument - Scientific Equipment, Volt Meter, 1950s
Used to teach physics students - introduction to principles of electric powerA teaching / demonstration model with large scale and transparent panels. Polished wood frameBlack tape on front panel - "PHYSICS"scientific instrument, physics, electric power, voltmeter, ammeter -
Bendigo Military Museum
Equipment - WEBBING EQUIPMENT, 1956
Webbing, Patten 37 with two ammunition pouches & a felt covered enamel water battle with cork attached. Khaki in colour.On belt: “MTK D [up arrow] D 1956 Normal” Handwritten: “Mangano 545125” On belt & underside right shoulder strap: “Hennequin 3203281”military equipment - kit bag - army, webbing, passchendaele barracks trust -
Bendigo Military Museum
Equipment - GOGGLES WW2, C.1939 - 45
Items relate to Clifford Alfred Cairncross RAAF. Refer 2108.7 for his service record.Clear celluloid eye shield stapled to cloth forehead band. Press studs on shield & band allows shield to wrap around eyes. Goggles fastened to head with adjustable elastic band. Elastic band joined with metal hook & ring.glasses, eyesheild, military equipment -
Woodend RSL
Equipment - Lanyard clip (for ALAG Haversack)
The object is representative of military gas respirator circa mid 20th century.Small fabric lanyard with metal clip at either end. To be used with magazine pouch (2020.000018-1). One end is a 'D' shaped metal ring Other end is a 'hook clip'. -
Stanley Athenaeum & Public Room
Instrument - Wooden Ruler, 'Shell' Ruler
Wooden ruler 12 inches and mm's . The 'Shell' inscription. Back has 'degree' measurements -
National Vietnam Veterans Museum (NVVM)
Equipment - Equipment, Army, Tape Reader
Metal, electric reads punche tapes, with handleTeletype Corp., Chicago, ILLsignals -
Uniting Church Archives - Synod of Victoria
Equipment - Printing block
Unidentified church with Sunday School metal photographic printing block on a wooden block. The image is of one wood and one brick building side by side. The block has handwriting on the back."SS block Sunday School" -
Stanley Athenaeum & Public Room
Instrument - Clock, Ansonia wall clock, Purchased in 1892
The clock has been at Athenaeum since it was donated by Mr. Robert Chamberlain in 1892. Restored by George Premm in 2000 when the clock face was replaced.Octagonal wooden framed wall clockRoman numerals for time and 31 numbers on the outer face for days of the month -
Federation University Historical Collection
Instrument - Scientific Instruments, Abbott, Boxed Theodolite, c1850-1860s
This item was used at the Ballarat School of Mines. Francis Abbott was a watchmaker from Manchester. He arrived in Tasmania as a convict in 1845, and was granted a ticket of leave in 1849. He died in 1883.A theodolite in a timber boxEngraved Abbott Hobart Town Varley Londontheodolite, scientific instruments, francis abbott, abbott hobart town, varley london, convict -
Federation University Historical Collection
Instrument - Scientific Instrument, Level (Dumpy), c1940
Used at Surveying classes at the Ballarat School of Mines.A surveying level attached to a telescope.ballarat school of mines, surveying, scientific instruments