Showing 880 items matching tools-and-equipment
Container (1199) Equipment (1851) Functional object (3970) Instrument (399) Machine (332) Tool (1438) Vehicle (149) Weapon (465)-
Flagstaff Hill Maritime Museum and Village
Machine - Dioptric Apparatus, mid 19th century
Before the introduction of electricity, lighthouses had a clockwork mechanism that caused the lens to rotate with a light source inside that was either powered by Kerosene or Colza oil. The mechanism consisted of a large weight attached by a cable through the centre of the lighthouse to the top where the cable wrapped around a barrel, drum or wheels that controlled the speed of the lights rotation by a clockwork mechanism. The keeper would crank the clockwork mechanism, which would lift the weight ready for the next cycle similar to an old grandfather clock mechanism. Once the weight lifted to its apex at the bottom of the first landing, the keeper would let it fall, which would pull on the cable, which would, in turn, operate a series of gears activating the rotation of the Fresnel optical lens, which would then rotate to create the lighthouse’s unique light speed of rotation characteristic. Creating a specific characteristic required a way to regulate the speed of the rotation, and was important as sailors could identify a particular light by its speed and time between flashes. The weight had to fall at a certain rate to create the proper rotation speed of the lens and a regulator within the mechanism accomplished this. History: From 1851, Chance Brothers became a major lighthouse engineering company, producing optical components, machinery, and other equipment for lighthouses around the world. James Timmins Chance pioneered placing lighthouse lamps inside a cage surrounded by Fresnel lenses to increase the available light output these cages, are known as optics and they revolutionised lighthouse design. Another important innovation from Chance Brothers was the introduction of rotating optics, allowing adjacent lighthouses to be distinguished from each other by the number of times per revolution the light flashes. The noted English physicist and engineer, John Hopkins invented this system while employed at Chance Brothers. Chance Brothers and Company was a glass works and originally based in Spon Lane, Smethwick, West Midlands England. The company became a leading glass manufacturer and a pioneer of British glass making technology. The Chance family originated in Bromsgrove as farmers and craftsmen before setting up a business in Smethwick near Birmingham in 1824. They took advantage of the skilled workers, canals and many other industrial advances taking place in the West Midlands at the time. Robert Lucas Chance (1782–1865), known as 'Lucas', bought the British Crown Glass Company's works in Spon Lane in 1824. The company specialised in making crown window glass, the company ran into difficulty and its survival was guaranteed in 1832 by investment from Chance's brother, William (1788 – 1856). William owned an iron factoring business in Great Charles Street, Birmingham. After a previous partnership that Lucas had dissolved in 1836, Lucas and William Chance became partners in the business which was renamed, Chance Brothers and Company. Chance Brothers invented many innovative processes and became known as the greatest glass manufacturer in Britain. In 1848 under the supervision of Georges Bontemps, a French glass maker from Choosy-le-Roi, a new plant was set up to manufacture crown and flint glass for lighthouse optics, telescopes and cameras. Bontemps agreed to share his processes that up to then had been secret with the Chance Brothers and stayed in England to collaborate with them for six years. In 1900 a baronetcy was created for James Timmins Chance (1814–1902), a grandson of William Chance, who had started the family business in 1771 with his brother Robert. Roberts grandson, James became head of Chance Brothers until his retirement in 1889 when the company became a public company and its name changed to Chance Brothers & Co. Ltd. Additional information: Lighthouses are equipped with unique light characteristic or flashing pattern that sailors can use to identify specific lighthouses during the night. Lighthouses can achieve distinctive light characteristics in a few different ways. A lighthouse can flash, which is when brief periods of light interrupt longer moments of darkness. The light can occult, which is when brief periods of darkness interrupt longer moments of light. The light can be fixed, which is when the light never goes dark. A lighthouse can use a combination of flashing, oscillating, or being fixed in a variety of combinations and intervals to create individual light characteristics. It is a common misconception that a lighthouse's light source changes the intensity to create a light characteristic. The light source remains constant and the rotating Fresnel lens creates the various changes in appearance. Some Fresnel lenses have "bulls-eye" panels create beams of light that, when rotated between the light and the observer, make the light appear to flash. Conversely, some lenses have metal panels that, when rotated between the light and the observer, make the light appear to go dark. This Dioptric clockwork apparatus used to turn a lighthouse optical lens is very significant as it is integral to a lighthouses operation, we can also look at the social aspect of lighthouses as being traditionally rich with symbolism and conceptual meanings. Lighthouses illustrate social concepts such as danger, risk, adversity, challenge and vigilance but they also offers guidance, salvation and safety. The glowing lamp reminds sailors that security and home are well within reach, they also symbolize the way forward and help in navigating our way through rough waters not just on the oceans of the world but in our personal lives be it financial, personal, business or spiritual in nature. Nothing else speaks of safety and security in the face of adversity and challenge quite the way a lighthouse does. Revolving dioptric clockwork apparatus used to turn a Fresnel optical lighthouse lens. A cylindrical cast metal pillar and cabinet painted green with 3 glass doors enclosing the top section. Inside the pillar/cabinet is a large clockwork mechanism used to turn and regulate a lighthouse light by means of weights and a chain attached to same. One door has the name "Adams Mare" in metallic dots similar to "Braille" to the inside edge of door frame.shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, flagstaff hill, maritime-museum, shipwreck-coast, warrnambool, flagstaff-hill-maritime-village, revolving dioptric mechanism, dioptric mechanism for lighthouse, lighthouse clockwork timing mechanism, acetylene lighthouse light mechanism, 19th century lighthouse mechanism, kerosene light, fresnel lenses, colza oil, chance brothers -
Flagstaff Hill Maritime Museum and Village
Instrument - Ruler, 1930-1955's
This measuring ruler was used in the planning and making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This ruler made by instrument makers J Rabone and Sons of Birmingham, is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This ruler was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Ruler, folding, wooden with brass hinges. Maker J. Rabone & Sons, Birmingham. Model No. 1375. It is warranted to be made of Boxwood. Length is 24 inches, divided into 1/8th inches on one side and 1/16th inches on the other side. This ruler is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”.“J RABONE & SONS / BIRMINGHAM”, “WARAND BOXWOOD”, “NO 1375”flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship model sovereign of the seas, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, measuring instrument, ruler, folding ruler, j rabone and sons of birmingham england, ruler model 1375, sovereign of the sea, ship model, hobby, ship model tool, english war ship, j rabone and sons -
Mission to Seafarers Victoria
Instrument - Reed organ, W Bell & Co, c. 1888
This organ was gifted by the Bethel Community in 1890 to the then Victorian Seamen's Mission, originally founded by the Bethel Union in 1857. The gift was intended to assist with worship. Despite all appearance, this organ is not a pipe organ but a reed organ that works in a similar manner to an accordion. In May 1890, the sum of seventy pounds was put towards the purchase of the organ. The sum being raised via subscriptions. The organ was inaugurated in September 1890. Jabez Carnegie (1832-1892), importer of piano and organs in Melbourne, had made a trip to Europe and Canada in 1887 and had secured the agency of Bell organs. W. Bell & Co were a Canadian organ and piano manufacturer, considered the premier organ manufacturer of the time. W Bell & Co changed its name to Bell Organ and Piano Co in 1888 meaning this organ had to be manufactured prior to the name change. The organ was first used in the mission main room from 1890 to 1915 when the St Nicholas chapel was built at the back (see item 0548. It was transfered to the new Port Melbourne mission in 1937 (link on postcard from State Library Victoria). In 1972, it was transferred to the Holy Trinity Church in Bay Street after the closure of the Mission In the late 1980s during a National Trust campaign to save the building, the organ was sold by the Anglican Men's Society to the Trust's organ committee, who carried out some restoration work and returned it to the former Missions to Seamen chapel. In 1991 the Office of Major Projects had control of the whole 'Bayside' development site. With the Mission to Seamen Building emptied and proposed for demolition, the Office of Major Projects removed the organ and placed it in storage in various locations - finally, in the Museum of Victoria store in Abbotsford. In 1995-6, enquiries by Jim Hillis resulted in the return of the organ to the control of the Port Melbourne HIstorical & Preservation Society. As the Society had no suitable location for the organ, several churches and schools in Port Melbourne were approached to take the organ with no results. The nearby suburbs were suggested next. Finally the Melbourne Maritime Museum (Polly Woodside) was approached and agreed to place it in their Museum on a long term loan. In 1997 it was on display in no 5 shed South Wharf (23/3/1997). In 2006, the Polly Woodside South Wharf site was to be re-developed, and they could no longer retain the organ. Accordingly, on 4 May 2006, the organ was transferred to the Mission To Seafarers building in Flinders Street Extension as an indefinite loan (refer OL 022) The PMHPS deaccessioned it to finally transfered it in 2018 to MTSV.(See also acquisition details re 21st C finalisation of acquisition) This organ is a tangible reminder of the longevity of the Mission to Seafarers, a link with the original Bethel Union which was instrumental in 1856 calling a public meeting and inviting subscriptions by various non-conformist churches to found a mission to Seamen. Rev Kerr-Johnson delivered the first service in 1857 aboard the Emily. The Mission to Seafarers has been in operation ever since and continues to operate to the same purpose today.Large reed organ that looks like a pipe organ with fifteen elaborately painted pipes bearing a floral motif. The body of the organ is elaborately decorated in carved wood. It has 17 knobs above the keyboard both which can be concealed when the keyboard cover is lowered. There are two foot pedals at the bottom of the organ with "Mouse Proof Pedals" cast into the framing iron. list of stop names: Viola 4Ft Diapason 8Ft Dolce 4Ft Violetta 2Ft Sub Bass 16 Ft Octave Coupler Vox Humana Forte Picciolo 2Ft Hautboy 8Ft Aeoline 8Ft Cremona 16Ft E---bone 16Ft Echo 8Ft Celeste 8Ft Melodia 8Ft Flute 4FtMaker's mark in gold lettering above keyboard: W. Bell & Co Brass plaque on front board: Presented to/The Victorian Seamen's Mission/by/Congregation worshipping in Bethel/& friends./1st September 1890 Behind the stops a wooden plaque: J. CARNEGIE & SONS, SOLE AGENTS FOR VICTORIA MELBOURNE organ, worship, bethel, pipes, reed, bethel union, pipe top, jabez carnegie, w. bell & co, port melbourne, mission to seafarers, seamens' mission, mission to seamen, guelph, ontario, canada, pmhps, polly woodside, harmonium, reed organ -
Queenscliffe Maritime Museum
Machine - Outboard Motor
Twin cylinder horizontally opposed water cooled 2 stroke outboard motor including shipping crateBritish Motor Boat manufacturing Co. -
Puffing Billy Railway
Vehicle - Traction Engine - Foden Compound, 1914
Ordered by Langwill Bros., & Davies Ltd Melbourne Used for saw milling, dam constructions and log haulingFoden Traction Engine This engine is a compound traction engine built by Foden Ltd of Sandbach England in 1914 – builders number 4525. This was ordered by Langwill Bros and Davies Ltd of Melbourne and was used by Mr F Orr on his farm at Bullarto South Victoria. On the farm it was used for many agricultural purposes and was used at times as a stationary engine to run a wooden thrashing machine. The unit was last used on the farm in 1947 and put aside on the farm with a “museum” of other old agricultural tractors and machinery. Mr Orr gave us the engine as an exhibit for the Menzies Creek Museum of Puffing Billy in the 1960s. At that stage he was an elderly gentleman of 97 years and maintained a great interest in his farm which had been in his family’s hands for three generations at that stage. His grandfather had cut the farm from the bush. The traction engine in its youth was used to go around other farms in the district and went as far away as the Wimmera and Mallee farms thrashing crops of wheat, barley and oats. It towed the wooden thrashing machine behind it on its trips to these farms on hire to the farmers. Foden Compound Traction Engine Built by Foden Ltd., Sandback, England in 1914 to the order of Langwill Bros., & Davies Ltd., Melbourne, it was used on a farm for sawmilling, dam constructions and log hauling. Donated by F. Orr of Bullarto South, Victoria. Foden Compound Traction Engine - made of Steel (Painted)Foden foden, traction engine, steam, puffing billy -
Whitehorse Historical Society Inc.
Machine - Chaff Cutter
Item was handed to Society members in the late 1970s by Mr. Davey.Green painted metal four legged stand to which is attached a large red painted wheel with two cutting blades and a handle.A green wooden chute extends out and two large cog wheels are at the start of this. See NA1416 for comments.The 'Bentall' CPB chaff cutter.rural industry, livestock, farm machinery -
Moorabbin Air Museum
Machine - Armstrong Siddeley Cheetah 300Hp Air Cooled 7 Cylinder Radial
Historical Details: . Description: The Armstrong Siddeley Cheetah was designed in Britain and originally known as the Lynx. It was built in large numbers and powered both the Avro Anson and Airspeed Oxford.. Level of Importance: State -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Instrument - Vulval douche associated with Dr Frank Forster
Bakelite douche, consisting of three sections and two caps. Can be disassembled for cleaning. -
Clunes Museum
Machine - WRINGER
RUBBER WRINGER FROM MRS. MARIE FEATONBY OF LOTHAIR STREET CLUNES. USED BY HER DURING HER MARRIED LIFE.WOODEN AND METAL HAND WRINGER WITH WRITTEN INSTRUCTIONS ON WOODEN FRONT PANEL.NO.302 EXTRA HIGH GRADE WARRANTED. THE WRINGER CO. - TRADE MARK - A.W.CO.local history, domestic, laundering, -
Queenscliffe Maritime Museum
Machine - Engine
Single cylinder 4 stroke 5 HP engine with gearbox -
Moorabbin Air Museum
Machine - CAC (North American) CA-17 Mk 20 Mustang A68-71
Historical Details: . Description: Mustang A68-71was built by CAC in March 1946. It was delivered to 1 Air Depot RAAF ex CAC on 16/04/46 and then issued to 78 Sqn on 15/07/46. On 27/04/48 it was issued to 25 Sqn. The Mustang was designed in 1940 by North American Aviation (NAA) in respo. Level of Importance: -
Moorabbin Air Museum
Machine - De Havilland DH114 Vampire T35 A79-835 (Displayed As A79-819)
Historical Details: . Description: First flown on the 29th of September 1943, the Vampire, in its many versions, came to be the most widely used British military jet aircraft ever produced, and saw service with some 25 air forces around the world. In 1951 the RAAF ordered 36 DeHavilland. Level of Importance: Regionaldh vampire -
Federation University Historical Collection
Instrument - Scientific Equipment, Volt Meter, 1950s
Used to teach physics students - introduction to principles of electric powerA teaching / demonstration model with large scale and transparent panels. Polished wood frameBlack tape on front panel - "PHYSICS"scientific instrument, physics, electric power, voltmeter, ammeter -
Federation University Historical Collection
Instrument - Scientific Instrument, Boxed Petrographic Microscope, c1912
Used at the Ballarat School of Mines Petrology classes. Probably a second generation petrological microscope used at SMB. Earlier reference ; to " Petrological Microscope" is made in SMB 1908 - 9 calendar page 35. Reference to "Mineral Microscopy" found in calendar for 1896, page 47. Petrographic Microscope with two-lens objective turret in a timber case. The microscope black enameled frame with brass components. Housed in a polished wood case. Three additional polarizing filters in accessory drawer. "E. Leitz Wetzlar No. 139041 Made for Kilpatrick & Co Melbourne" A removable label inside storage case door, dated "I.II.1912" and stating the obtainable magnification ratios.ballarat school of mines, geology, petrography, microscope, scientific objects, scientific instruments -
Moorabbin Air Museum
Instrument (Item) - W&G "Douglas" Combined Protractor And Parallel Rule
-
Australian Gliding Museum
Machine - Glider – Sailplane, 2015
The Salamandra is a Polish glider designed by Waclaw Czerwinski at the Military Glider Workshops in Krakow in 1936. This glider, designated “W.W.S.1”, was produced in substantial numbers prior to the second world war and used in Poland and some other eastern European countries for training pilots. Only one example survived the war, hidden away in the village of Goleszow in Silesia. In addition, no technical drawings could be found, so when the glider was discovered, the Gliding Institute being keen to re-establish gliding in Poland, used the glider to draw up new plans for construction. Five were built for the Institute in 1947 before production was resumed of the “Salamandra 48” at the SZD Jezow Workshops. Improvement were made by adding airbrakes and structural changes for the “Salamandra 49” and a windscreen and larger tailplane were changes adopted for the “Salamandra 53”. An export version designated “53A” was sold to and built under licence in China. Production of the Salamandra ceased in the early 1960s. Total production may have been in excess of 500. The glider was well regarded as a light weight trainer capable of soaring performance. The Museum’s replica was built by Ray Ash and may be may be classified as a “Salamandra 53”. However, he has added something of his own to the design by replacing the cable runs in the wings with control rods. The glider is substantially complete. The wings and tail / rudder surfaces have been covered with poly-fibre fabric. The fuselage woodwork is sealed with varnish. In addition to the finishing work (including painting) and rigging of the main components, the linkages for Ray’s control rod modification may need further engineering to make them operational. The Ray Ash Salamandra is the first of the type to appear in Australia. The Salamandra did not play any role in the development of gliding in Australia in the early years. However, it is an important exhibit in that it shows in tangible form a nacelle fuselage training glider in configuration and construction detail. As such it revisits the pioneering era of the 1930s and 1940s in Australia when wood, wire and fabric were the rule and the nacelle primary glider was generally the first step up for pilots who had mastered the basics in an open primary.Nacelled solo training glider of traditional wood and fabric construction. Construction incomplete.Noneaustralian gliding, sailplane, glider, salamandra, czerwinshi, poland, ash -
Australian Gliding Museum
Machine - Glider - Sailplane, 1937
The Golden Eagle is an original design by Geoff Richardson. Geoff commenced gliding in the early days of the sport circa 1933 in Melbourne, flying at Coode Island and Mt Frazer. In 1934, he began construction of a secondary type glider but scrapped it upon realizing that a better design was needed. He conducted further research and came up with a sailplane of similar size and general arrangement to the Grunau Baby but with a “Gull” wing using a Gottingen 535 wing section (the same as for the Grunau Baby). Geoff did all the technical calculations himself and even made up and tested a Casein glue for the construction. Geoff competed construction of his new sailplane (which he called the “Golden Eagle”) in 1937 and it was test flown at Laverton at the western edge of Melbourne in September 1937. On the same day, at Laverton, the Gliding Club of Victoria flew its new Grunau Baby 2 sailplane which it had imported as a finished machine from Edmund Schneider in Germany. The Golden Eagle was found to fly well, having a similar performance to the Grunau Baby. In the 1950s, the Golden Eagle was modified by rebuilding the front of the fuselage to enclose the cockpit with a Perspex canopy. A landing wheel was incorporated behind the skid. Spoilers were added to the wings and a trim tab to the elevators. The Golden Eagle has been flown with the VMFG (Victorian Motorless Flight Group) for most of its long life. When donated to the Australian Gliding Museum in 2016 by Alan Patching it was probably the oldest, continuously airworthy glider in the world. Having regard to the historical significance of the Golden Eagle, the Museum has decided to not to fly it anymore to avoid risk of loss or damage. The exhibit is of great significance for Australian gliding history – the Golden Eagle is a flyable 1930s aircraft in excellent condition that was designed and built by an Australian gliding pioneer. Single seat wood and fabric sailplane finished with white wings, tailplane and rudder and yellow fuselage Registration letters “FC” on fuselage nose port side, Australian flag, Vintage Gliders Australia and VMFG decals on rudder, “Golden Eagle” lettering in red on each side of the fuselage below the canopy, Aboriginal flag decal on port side of fuselage below the canopy. australian gliding, glider, sailplane, golden eagle, richardson, patching, vmfg, victorian motorless flight group -
Warrnambool and District Historical Society Inc.
Instrument - Bass Drum, c.1950
This drum comes from the group which is now called " Warrnambool & District Pipes & Drums". As the Warrnambool Pipe Band it was formed in 1906 and today its aim is to foster a taste for bagpipe music. A separate Ladies' Band was set up in 1950 and combined with the Mens' Band in 1974. The Warrnambool & District Pipes & Drums is held in high regard nationally.This drum is a memento of an important musical group in WarrnamboolThis is a large, circular drum for a pipe band. The outside centre is skin surrounded by wooden rings, one of which is painted black. Between the rings is a cream and black mottled pattern on a curved piece made of composite material. There are eight silver tuning rods equally spaced along the side. One of these has two pieces of red tape attached. There is printing on both sides of the drum.Warrnambool Ladies Pipe Band Warrnambool Pipe Band warrnambool ladies' pipe band, warrnambool & district pipes & drums -
J. Ward Museum Complex
Instrument - Diagnostic Set, Gowllands Otoscope Ophthalmoscope Diagnostic Set with Medical Instruments
This Diagnostic Kit is a fair example of medical equipment used within mental asylums in the 19th and 20th centuryBlack wooden box, fabric covered. Contains stainless steel instruments.'Gowllands' Made in Englandmedical, set, instruments, diagnostic -
Parks Victoria - Andersons Mill
Vehicle - Trolley, bag
This is a bag trolley that was used to transport large bags of grain or other items at the mill.Wooden frame of trolley, with vertical handles with three stabilising cross bars. Base of trolley has a curved metal part. This mounted on two small metal wheels. -
Australian Gliding Museum
Machine - Glider – Sailplane, 1962
This ES Ka6 sailplane (VH-GRW, serial number 55) was built under licence from Alexander Schleicher in 1962 by Edmund Schneider Limited. It was one of 12 Ka6s, with minor variations from the Schleicher product, built by Schneiders in Australia. It was test flown at Parafield Aerodrome, Adelaide, on 8th September 1962. By way of background, the Schleicher KA 6 series of sailplanes were designed by Rudolf Kaiser in Germany. They were quite successful in the Standard Class in the late 1950s and 1960s. Over 1400 were produced. The first owner of VH-GRW was the Victorian Motorless Flight Group which, at the time, was based at Berwick Airfield on the outskirts of Melbourne. On 22 April 1972, the ownership passed to a syndicate of members from the VMFG. It again changed ownership in July 1974. The new owners were another syndicate based at Campbelltown in New South Wales. The glider went to a Tasmania syndicate in June 1976 and finally to the Soaring Club of Tasmania. In total VH-GRW recorded 3369 hours air time from 4952 launches. It was used very little after 1996. This exhibit is an example of the Scheicher Ka6 sailplane type that were built by Edmund Schneider in Australia.Plywood, spruce and fabric covered high wing single seat sailplane. The airframe has been restored to the point of repainting. Currently the fuselage, rudder and the wings aft of the main spar are coated with pink dope. The tailplane retains the white gloss finish of the glider prior to the restoration work. The cockpit to be refitted (with instruments etc). Serial number 55. The manufacture details are displayed on a metal plate fixed to the main bulkhead. australian gliding, glider, sailplane, schneider, schleicher, ka6, rhonsegler, victorian motorless flight group, soaring club of tasmania -
Whitehorse Historical Society Inc.
Machine - Carpet Sweeper
Carpet sweeper with wooden casing enclosing brush rollers. Four metal wheels with rubber covers and attached wooden handle. Metal handle with rubber bumpers with 'Ewbank Patent No. 183576 1920s logo on top of lion on wooden base with crossed flags behind crown and sign British Manufacture. Front and back have 'Ewbank Magnum' on case. Bumper is cord with rubber at corners with 'Ewbank 1925 Patent No. 34357 written on it. Balal roller between wheels is painted gold with 'Ewbank Patent Ball Bearing - 23610 1902 18397 1904. Metal lever for dropping pans has Press Slide etched on. Instructions underneath on paper labelsAs abovedomestic items, cleaning -
Moorabbin Air Museum
Machine - Sander Veenstra Thermite, 1980
Historical Details: . Description: Sander Veenstra was a pioneer of the Australian ultra light flying movement in the early 1970’s. He began his flying in a Skycraft Scout, much like the example in the Museum collection he later fitted the Scout with two Victa motor mower engines. He bu. Level of Importance: National -
Bendigo Military Museum
Instrument - BUGLE, C. 1940
The Bugle was played by the British over 2000 times to warn of impending air raids in the Middle East. When a new electronic siren was installed Bill Nicholls souvenired it and carried it in his haversack until he reached home. William Bona Nicholls No VX36468 2/24 Batt 9th Div. enlisted on 12.8.40, embarked 16.11.1940 for the Middle East, promoted L/Cpl 8.5.1941, served in the Seige of Tobruk, El Alamein and Middle East Campaigns. He was taken POW at Derna and escaped after 8 hours. Embarked for Australia 1.2.1943 and disembarked Melbourne 25.2.1943. Embarked for New Guinea 1.8.1943, hospital 5.12.1943 with Degue Fever, rejoin unit 9.12.1943, served in the Lae and Finschafen campaigns. Promoted Sgt 11.2.1944, embark for Australia from Finschafen 28.2.1944 and disembark Brisbane 7.3.1944. Evacuated to hospital 16.3.1945, appears to be Anxiety State. Discharged from the Army 3.9.1945 with the rank of S/Sgt.Copper & brass army bugle with nozzle & holding chain.Main section of bugle has: a lettered crest, & Besson & Co, London, 1940musical instruments - wind, military history, bugle, tobruk -
Whitehorse Historical Society Inc.
Vehicle - Spring Cart, C1930
This item was used as a general purpose cart on the Livermore Orchard in Vermont and was donated by Mr. Livermore when the orchard was sold for housing development.|In the 1840's a vehicle known as a springcart, chaise cart, and family cart was the choice of colonist who needed to travel from town to town. It was light, well sprung, capacious and adaptable. It was used by all stratas of society. See ref.Two wheeled general purpose spring cart, used on an orchard. Also known as a 'Jingle'. It is painted green and terracotta. It was pulled by one horse and has internal measurements of 0.46M x 1.5M x 2.46M.The wheels are 1.1M in diameter.rural industry, livestock, transport, horse -
Trafalgar Holden Museum
Vehicle - T Model Ford
A large number of T model's started their life in Australia being bodied by Holden Motor Body Builders between 1915 and 1927.The mode accounted for 57% of the worlds automotive production Ford took over production in Geelong in 1925White body with red mudguards open coupet model ford, vehicle, cars, holden -
The Cyril Kett Optometry Museum
Instrument - Gilt brass spyglass, c1820
Spyglasses were popular in the eighteenth and nineteenth centuryGilt brass 5 draw spyglass or small monocular telescope. Foliate and floral decoration around eyepiece, ribbed casing with suspension ring. 5 draw telescopic action extends the spyglass for use.vision, optical devices, fashion -
Flagstaff Hill Maritime Museum and Village
Machine - Treadle Lathe, 1920-1923
The lathe-making business incorporated in 1902 as Drummond Bros Ltd originated in the fertile mind of Mr Arthur Drummond, said to have been living at that time at Pinks Hill, on the southern edge of Broad Street Common, west of Guildford. Mr Drummond, whose accomplishments included several pictures hung in the Royal Academy, was unable to find a lathe suitable for use in model engineering. In 1896 he designed for himself a ‘small centre lathe … which had a compound slide rest with feed-screws and adjustable slides’. He also designed and built ‘lathes of 4.5 inch and 5 inch centre height, which had beds of a special form whereby the use of a gap piece was eliminated but the advantages of a gap-bed lathe were retained’. Assisted by his brother, Mr Frank Drummond, who had served an apprenticeship to an engineering firm at Tunbridge Wells, the first lathes were made in a workshop adjoining Arthur Drummond’s house. The demand that speedily built up led to the decision to form a company and manufacture the lathes for sale commercially. Land was acquired nearby, at Rydes Hill, and the first factory built. The enterprise was a success, and the company quickly established ‘a high reputation in this country and abroad for multi-tool and copying lathes, and gear-cutting machines’. Other lathes were added to the range, including the first of the ’round bed’ machines for which the firm became widely known. A Drummond 3.5 inch lathe was among the equipment of Captain Scott’s 1912 expedition to the South Pole, and large numbers of 3.5 inch and 4 inch designs were exported to Australia, Canada and India. By the outbreak of war in 1914, 5 inch, 6 inch and 7 inch screw cutting lathes, arranged for power drive, were on sale. Large orders were received from the government for 3.5 inch lathes, for use in destroyers and submarines, and 5 inch lathes for the mechanised section of the Army Service Corps. The latter were used in mobile workshops. The factory worked night and day to supply the forces’ needs, until production was disrupted by a fire which destroyed a large part of the works in May 1915. As soon as rebuilding was complete work restarted. At the end of the war the entire production was being taken by the Government departments, a special feature being a precision screw lathe, bought by the Ministry of Munitions in 1918. Between the wars Drummond Bros Ltd introduced new machines for the motor vehicle, and later the aircraft industry, and the works were extended on many occasions to fulfill the increasing orders. The Maxicut multi-tool lathe (1925), designed for high-production turning operations, was one of the first machines of this type to be built in England. It was followed (1928) by an hydraulic version for turning gear blanks, and similar work. Further developments provided machines which, during the Second World War, turned all the crankshafts and propeller shafts for Bristol engines. Others, ordered by the Ministry of Supply were employed in turning shells, and many other specific needs of vehicle and aircraft manufacture were catered for by new types of Drummond lathes. Production of the small centre lathes ceased during the war when the company needed to concentrate on building multi-tool lathes and gear shapers. After the war a completely new Maxicut range was introduced, replacing the older versions, and fully automatic. The types were continually developed, and new versions manufactured until the end of the company’s life in 1980. The disappearance from the scene of Mr Arthur Drummond in 1946, and the end of the company’s autonomous existence in 1953 when the company was acquired by William Asquith Ltd, which was in turn bought by Staveley in 1966, meant that the factory at Rydes Hill became one – albeit very effective – part of a large national engineering company. Achievements at the Guildford works during its last years included the development of automated Maxicut gear-shapers in what was ‘probably the most fully automated gear shop in the country’, while a machine from Guildford was sent to the Osaka Fair in 1962. In 1963 an agreement was signed with Hindustan Machine Tools for the manufacture of Maxicut gear-shapers in state owned factories in Bangalore and Chandigarh. During 1963 the two largest multi-tool lathes ever made in the UK were installed in Ambrose Shardlow’s works in Sheffield for handling cranks up to 14 foot long. In 1976 Drummond lathes were included in Staveley’s £14,000,000 installation in Moscow of an automated production line for Zil motor cars. Up to the end invention continued at Guildford: a new Drummond Multi-turn memory-controlled machine was shown at the International Machine Tool Exhibition in 1977. This could not save the works from the pressures of the late 1970s, and Staveley Industries closed its Guildford site in 1980.An early example of a lathe that was designed primarily for the hobbyist model maker. It is in good condition and sought today by collectors as many of it's attributes were innovative at the time and lead to further development and incorporation of some of its features into more industrial models of production machinery. Lathe, round bed, treadle powered lathe, Drummond Type A, Serial number and maker's inscription. 1920-1923, Made by Drummond Brothers in Guildford, Surrey, England. Lathe is complete with Chuck, Tool post and Tail Stock in situ (30 extra parts)"MADE BY DRUMMOND BROTHERS LIMITED - PATENT TEES - RYDE'S HILL n GUILDFORD SURREY", "Serial Number 01470," "L44" or "L45 " flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, lathe 1920-1923, round bed lathe, treadle lathe, drummond type a, guildford surrey, drummond brothers guildford surrey england, tread'e -
Federation University Historical Collection
Instrument - Scientific Instrument, Crookes Tube
This item was used at the Ballarat School of Mines Physics department until the 1970s-1980s to demonstrate that electrons have a straight line. A sealed conical glass tube, equipped with two electrical connections. One, at the narrow end, terminated inside with a sic shape electrode and faces a cross-shapped aluminium steel target near wide end. Other electrode is side branch, which also provided means of mounting on a polished wood circular stand. A Crookes Tube is an early experimental electrical discharge tube, with partial vacuum, invented by English physicist William Crookes and others around 1869-1875, in which cathode rays, streams of electrons, were discovered. May also be called a Crookes–Hittorf tube or Maltese Cross Tubemaltese cross, crookes tube, physics, electron emission demonstration, cathode rays, vacuum tube, electrons, crookes–hittorf tube, maltese cross tube -
The Cyril Kett Optometry Museum
Instrument - Trial frame, c1895
Trial frames are used to hold trial spectacle lenses in front of the eyes to establish the spectacle refraction. This unit is able to hold 3 lenses in front of each eye. It is very complex for its early date.This trial frame is a rare example of a very complex early design which has survived in good condition. Complex nineteenth century trial frame: double lens clip to front rotated by long control knob. Single downward pointing lens clip to back. Bridge height and extension adjustable. Variable inter-pupillary distance calibrated in inches. Slide extending curl sides. Eye rims stamped:'PAT NOV.6.94 & PAT JUNE25.95'. Sides stamped:'PAT APR.30.95'optometry, eye examination, refraction, trial frame, spectacles