Grampians Halls Gap & Stoney Creek dredge. circa 1909 . 2nd man from right is Alfred D'/alton; 4th from right is James OliverPhoto shows eight men seated, two standing. 3 tents in background.Grampians Hallls Gap & Stoney Creek dredge circa 1909 written on backpeople, d'alton, water supplies, channels

The Argus Melbourne Friday 10 July 1908 QUEENSCLIFF, Thursday. - After a series of successful experiments in dredging the eastern end of the South Channel, the suction dredge Pioneer sailed this after-noon for the Gippsland Lakes, where work awaits her. During operations in the South Channel the dredge worked on a sandy and shell bottom in depths ranging from 35ft. to 40ft. with unqualified success, performing the work much quicker and cheaper than the bucket drudge John Nimmo, which is still employed. Captain Macarthur was in charge of the operations.Brass lock from Port and Harbours suction dredge 'Pioneer' used at the Queenscliff creek entrance door lock, suction dredge, pioneer

May be contract dredge Melbourne built by Birdon, Port MacquarieColour photograph of a contract dredge working off Rigby Island, Gippsland Lakes, Lakes Entrance, Victoria.islands, ships and shipping, dredging, ocean

May be contract dredge Melbourne built by Birdon, Port MacquarieColour photograph of a contract dredge working off Rigby Island, Gippsland Lakes, Lakes Entrance, Victoria.islands, ships and shipping, dredging, ocean

May be contract dredge Melbourne built by Birdon, Port MacquarieColour photograph of a contract dredge working off Rigby Island, Gippsland Lakes, Lakes Entrance, Victoria.islands, ships and shipping, dredging, ocean

Port of Portland Authority archivesFront: (no inscriptions) Back: DREDG013 (pencil, lower right)port of portland archives, dredging, dredge, barge

Wooden stocked anchor was dredged up in April 2004, off Rigby Island, Lakes Entrance, Victoria.Colour photograph showing lakes dredge Sandpiper off Rigby Island, Lakes Entrance, Victoria.dredging, jetties

Port of Portland Authority archivesFront: (no inscriptions) Back: (no inscriptions)port of portland archives, dredge, harbour dredging, portland harbour trust

Port of Portland Authority archivesFront: (no inscriptions) Back: DREDG014 (pencil, lower right)port of portland archives, dredge, harbour dredging, portland harbour trust

Port of Portland Authority archivesFront: (no inscriptions) Back: (no inscriptions)port of portland archives, dredge, harbour dredging

Port of Portland Authority archivesFront: (no inscriptions) Back: Dump Borer on R/ Lima Barge on L./ Steel. (black ink on white label, centre)port of portland archives, dredge, harbour dredging

Port of Portland Authority archivesFront: (no inscriptions) Back: (no inscriptions)port of portland archives, dredge, harbour dredging

The Melbourne Harbour Trust Commission purchased the steam dredge SIR WILLIAM MATHEWS on 10 October 1941 from the Western Australian Government. Although the dredge was described as a suction dredge it was in fact a bucket dredge. After an overhaul, the vessel was renamed the GEORGE KERMODE and commenced operation in Victorian waters on 22 June 1942. The vessel was hired out to the Port of Burnie in 1945-46 but continued in the ownership of the Trust until 1 April 1976 when it was scuttled by the Department of Conservation, Forests and Lands as part of their artificial reef program. This program resulted in a number of reefs being established in Port Phillip Bay, including one off Carrum containing the wooden steamer URALBA.Timber and brass ship's wheel from center ladder hopper dredge George Kermode (formerly Sir William Mathews). Built Paisley Scotland 1914.noneships wheel, scuttled vessels, artificial reefs, george kermode

Port of Portland Authority archivesFront: (no inscriptions) Back: DREDG014 (pencil, lower right)port of portland archives, dredge, harbour dredging, portland harbour trust, 1950s, 1958

The coal from this open-cut mine is used to generate electricity for the State of Victoria. in 1934 two thousand miles of high tension transmission lines conveyed energy from a system of inter-linked power stations to the whole Melbourne metropolitan area, as well as to nearly 170 rural centres. Black and white image of the western end of the Yallourn open-cut in 1934. the bucket dredge on surface is reaching down 90 feet, on which level there is another similar dredge going down another 90 feet to the bottom of the 180 foot seam.yallourn, electricty, power, coal, open-cut, dredge

This nameplate was attached to the steel steamer Matthew Flinders I, a Suction Hopper Dredge used for pumping up sit and sanding from seabeds. It was donated by the Marine Engineer, Neville Dodds, from Ports and Harbours, from the Matthew Flinders I. The Matthew Flinders was constructed by Morts Dock & Engineering Coy. Ltd in Sydney, New South Wales. Identified as Ship No. 40, the dredge had twin screw engines that were made in Sydney. Its gross tonnage was 1180. It was launched on July 15th, 1916, and registered in 1917 at the Port of Melbourne by the owner, the Department of Public Works in Victoria. Unlike bucket dredges, the Matthew Flinders did not use permanent moorings but instead had bow and stern anchors. It travelled forward on the bow anchor, taking up a strip of even-depth wilt from the bed below. A local newspaper noted that the Matthew Flinders has many advantages that were especially useful for its work at Warrnambool. Warrnambool Harbour had been experiencing silting and sanding for many years. The problem continued even after the construction of the Breakwater in 1890, which was overseen by New Zealand engineer Arthur Dudley Dobson. Melbourne’s Department of Ports and Harbours sent the new Matthew Flinders to dredge the heavy silting in the Warrnambool Harbour in May 1919. This work was previously done by the smaller dredge, the Pioneer. However, after a month of work, the Matthew Flinders was returned to Melbourne for alterations to make it suitable for work in the heavy seas it experienced at Warrnambool. Both dredges were sent up from Melbourne when required over the years to periodically attend to the silting in the Harbour, but the Matthew Flinders was preferred because of its efficiency. It was still dredging the Harbour even in July 1938. The ship’s original master was J G Rosney. In February 1922 Percy Taylor from Ports and Harbours joined the Matthew Flinders as a Mate. 1923 the master in charge was Captain Dunbar. In August 1926 Percy Taylor was appointed as her Master and was later transferred to the Pioneer as Master in 1933. 1930 the dredges were no longer required as the Harbour was no longer suitable as a port. However, one source notes that the Matthew Flinders was still dredging the Harbour in 1938.This nameplate is significant for its association with the suction hopper dredge Matthew Flinders I, which was used to remove the build-up of silt and sand from the Warrnambool Harbour, allowing shipping activities to continue to operate in the Port of Warrnambool. The nameplate identifies the vessel and shows that it was built in Australia in the early 20th century for use within Australia. The need for dredging in the Warrnambool Harbour was a serious and ongoing problem, as silting continued to happen after a series of measures were taken to try and resolve the issue. Eventually, the Harbour could no longer function successfully as a port.Brass nameplate, rectangular with cut-away corners and moulded text, mounted with screws on timber. The plate is from a vessel, the dredge Matthew Flinders I, ship no. 40, built by Morts Dock & Engineering Coy Ltd in Sydney, and registered in 1917. A small rectangular engraved plaque below the nameplate gives further details of the ship and the donor.On nameplate: "MORTS DOCK / & / ENGINEERING COY. LTD. / SHIP BUILDERS / SYDNEY 1917 / SHIP NO 40" On small plaque: "Donated by / NEVILLE DODDS / PORTS & HARBOURS / MARINE ENGINEER / EX "MATTHEW FLINDERS I"flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, dredge, mathew flinders i, steel steam ship, twin screw engines, nsw, state of victoria, suction hopper, public works melbourne, warrnambool harbour, lady bay, sanding, silting, breakwater, morts dock & engineering co ltd, captain dunbar, ship no. 40, niville dodds, ports & harbours, marine engineer, marine technology, ship relic, percy taylor, matthew flinders, pioneer

Dredge Workers, c. late 1930s. Cock's El Dorado Gold & Tin Mining Dredge operated between 1936 and 1954. At the time of its construction, the dredge was the largest in the Commonwealth, producing 2,198 kg of gold.mining, gold, gold mining, dredge, cock's el dorado dredge, men, miners, el dorado, eldorado

Port of Portland Authority archivesFront: (no inscriptions) Back: dred 011 (pencil, lower right)port of portland archives, dredging, priestman stippert, barge

Port of Portland Authority archivesFront: (no inscriptions) Back: dred 020 (pencil, lower right)port of portland archives, dredging, priestman stippert, barge