The Phonic Ear hearing aids were actually auditory trainers for children in school. This aid was also an FM receiver so the child could clearly hear the teachers' voice. This was used by the student to receive the teachers' transmissions. For more information see: http://www.hearingaidmuseum.com/gallery/Miscellaneous/Assistive%20Devices/Phonic%20Ear/info/phonicearfmsystem.htm Beige FM Receiver with red plug-in crystal module (colour coded for frequency) and two leads on either side for hearing aids. This would have been used by the student to receive the teachers transmissions. Masking tape on front, obscuring name, writing on tape faded. "MODEL/HC 421 R/STEREO/AUDITORY TRAINER/FM/CERTIFICATION/THIS RECEIVER COMPLIES/ WITH FCC RULES PART 15/OPERATION IS SUBJECT/TO THE CONDITION THAT/ THE DEVICE WILL NOT/CAUSE HARMFUL INTER-/FERENCE AND THAT THE/DEVICE MUST ACCEPT ANY/INTERFERENCE THAT/MAY BE RECEIVED, INCL-UDING INTERFERENCE/THAT MAY CAUSE UN-/DESIFED OPERATION./PHONIC EAR/MODEL HC 421 R/TYPE GODKENOT/ deaf children australia, hearing aid, auditory training device, phonic ear

The first commercial digital hearing aid was created in 1987 by the Nicolet Corporation. The hearing aid contained a body-worn processor that had a hardwire connection with an ear mounted transducer. While the Nicolet Corporation’s hearing aid was not publicly successful and the company shortly folded, it was able to start a competition between companies to create more effective hearing aids. Two years later, in 1989, the behind-the-ear (BTE) digital hearing aid was launched. In addition to the Nicolet Corporation, Bell Laboratories expanded upon the hearing aid business by developing a hybrid digital-analog hearing aid. When the hearing aid was put on in the market, it was instantaneously successful. This development helped bring major changes to the world of the hearing aid. The next major milestone was creating an all-digital hearing aid. The Oticon Company developed the first digital hearing aid in 1995, but it was only distributed to audiological research centers for research on digital technology in the realm of acoustic amplification. The Senso was the first commercially successful, all-digital hearing aid, and was created by Widex in 1996. After the success of the Senso, Oticon began marketing their own hearing aid, the DigiFocus. Presently, the digital hearing aid is now become programmable. By making the hearing aid programmable, it has allowed hearing aids to be capable of regulating sound on their own, without using a separate control. The hearing aid can now adjust itself depending on what environment it is in and often does not even need a physical volume control button. Silver metal case with side clips and hearing aid attached. Has battery compartment for AA batteries. Volume control is the top left hand corner. Comes with its black case "C OF A/CALAID/101862" on back of case. "ANGUS & COOTE/Acoustics/HEARING AIDS" on inside cover of case

Tin container for band-aids - Cream background with red and blackBand Aid Elastic First Aid Dressings. Johnson and Johnsonmedicine, first aid

Metal Listening or Hearing Aids, Metal holder and Celluloid earpieces stawell

Mt Beauty Primary School commenced in 1948. At the time the Educational Aids / games were up to date and plentiful in the Primary grades. Educational aids continue to be updated along with technology.Mt Beauty Primary School began with up to date equipment and teaching methods. This collection is an example of pre-computer equipment.Variety of educational games and aids including those for teaching Italian 1. La Tombola del flori 2. Ecco Pinocchio - illustrated by Edward Dyas 3. Children's Italian Dictionary by Franko Leoni 4. La Befana- Notes for Teachers - Produced by the Catholic Education Office of Victoria 5. Italy a brief outline 6. Orizzonti - April Edition 1995 7. Zucchero filato - illustrated by Edward Dyas 8. La tombola dei negozi 9.Variform Inset Placing Trays Set 1- Philograph Publications 10. Cubes for matching 11. Kitten Cards - A Child's Play Quartet 12. Symmetry & Reversal Pairing Cards Boxes 1,2 & 3 Philograph Publications 13. Picture Dominoes - Hoborn Productions 1980 14. Figura Shapes 15. Colour and Lay Shapes 16. Tessellations 17. Tangram x2 18. Compass - Mathematical instrument -wooden, large size to fit drawing a circle with chalk on a blackboardmt beauty primary school, educational game and aids

Set of three Metcards with the Metcard logo and transport Mode icons. Tickets were used to promote World AIDS Day. Two copies of each ticket held except for item 3. 1 - 2007 - December 1, Daily Full Fare - 22-11-2007 and 2 hour concessioin - 27-12-2007 2 - 2008 - 2 hour concession - 6-11-2008 and 14-11-2008 3 - 2009 - Daily concession - 15-2-2010 Demonstrates one of many different types of Metcards issued during the period of used in Melbourne from 1996 to 2013Set of three Metcard tickets - printed on light card with a magnetic stripe. Has the ticket number and contact details, Metcard and Metlink logo on the front of the card.trams, tramways, tickets, metcard, metlink, aids, world aids day

Metal First Aid Kit with clasped lid containing various medical aids. Cotton wool, bandages and field dressings.On Lid - 6545-66-019-9803. First Aid Kit General Purpose Seatomedical, first aid, first aid kit, seato

Fairfield Hospital opened in 1904 as the Queen's Memorial Infectious Diseases Hospital, the first purpose-built isolation hospital for infectious diseases in Victoria. Its 22-acre site was located on a bank of the Yarra River. It was renamed Fairfield Hospital in 1948. In its later years, the hospital was a centre for AIDS treatment in Victoria, and a passionate campaign fought against its planned closure in the 1990s. Fairfield Hospital finally closed in June 1996. One section of the site was gazetted as a Public Park and Memorial Garden (containing an AIDS Garden).Circular white and red plastic badge. Silver metal, plastic-coated, with safety pin fastener adhered to back. Badge printed with the red text 'SAVE FAIRFIELD HOSPITAL'. Silver metal, plastic-coated, with safety pin fastener adhered to back.medicine, health, public institutions, fairfield, victoria, city of darebin, melbourne, politics, political protest, public protest, campaigning, badges, buttons, pins, public health, infectious diseases, aids

Hardcover W/ Dust JacketSignature (unknown) inside front cover, newspaper clipping about AIDS inserted inside front coverunited states, economics, society, walsh st library

Black box with "Sonotone" on lid with red felt & cream linings, containing two hearing aids: one silver hearing aid with black back using AA batteries with clip, Polyfon "popular" transistor (Body) hearing aid, and one silver hearing aid using 2 batteries: H.T & L.T. batteries with clip: Foriphone Model 40 Hybrid hearing aid. No ear pieces. Probably the 'old' hearing aids put in the 'new' hearing aid box. Box "Sonotone" on lid of box. Hearing aid 1. "POLYFON' in blue on bottom edge "POPULAR/SER NO 22155" on battery compartment. Hearing aid 2. Inside battery compartment "MODEL 4.0 / TRANSISTOR / FORTIPHONE / ENGLAND / PAT 634202 / 175026". Instructions re: batteries. 30V H.T battery and L.T. battery

Educational aidsMt Beauty and Bogong Primary Schools were well equipped with educational aidsWooden box containing 94 rubber stamps, 1 illustration sheet, 1 advertising sheet regarding the set and 4 metal trays holding the stamps. The box has a sliding 'door'. Inside are the trays, stamps outlining eg. transport, animals Logo and 2 black and white sheets. Paper blue, yellow and white logo glued to the top of the box "D.O.Smith at top and Educational Picture Maker" beneath forming a circle on the circumference with a picture of a large ship in the centre.mt beauty primary school, bogong primary school, rubber stamps, educational aid, d.o. smith, educational picture maker

The spur is used in many equestrian disciplines.Most equestrian disciplines have rules covering spur design and use. Spurs are usually held on by a leather spur strap that goes over the arch of the foot and under the sole in front of the boot heel. The stirrup is a light frame or ring that holds the foot of a rider, attached to the saddle by a strap, often called a stirrup leather. Stirrups are usually paired and are used to aid in mounting and as a support while using a horse.E. Fisher grew up and lived at Mongan's Bride in the Kiewa Valley. Horse riding was common in the Kiewa Valley especially before the introduction of motorised vehicles.A spur is a metal tool designed to be worn in pairs on the heels of riding boots foe the purpose of directing a horse to move forward or laterally while riding. It is usually used to refine the riding aids and to back up the natural aids eg. the leg, seat, hands and voice. A stirrup is a light frame or ring that holds the foot of a rider, attached to the saddle by a strap, often called a stirrup leather. Stirrups are usually paired and are used to aid in mounting and as a support while using a horse. The spurs and stirrups are made of steel and the straps of leather.horse riding, spurs for horse riders, stirrups for horse riders, e.fisher

Black hardcover, 294 pages. Worn spine and right cover edge. Appears to be well used. Contains black and white illustrations. Name written in pencil first page "T Hanrahan, Yarrawonga" 39th Edition, Published 1928, 1st Edition entitled "Aids for cases of Injuries or Sudden Illness, 1878 Ther authorised textbook of the "St John Ambulancer"

The first all transistor hearing aids appeared in 1953. They were created to replace vacuum tubes; they were small, required less battery power and had less distortion and heat than their predecessor. The vacuum tubes were typically hot and fragile, so the transistor was the ideal replacement. The size of these transistors led to developments in miniature, carbon microphones. These microphones could be mounted on various items. There were body hearing aids where the earpiece was connected to the hearing aid and battery pack worn on the body. Ear level hearing aids consisted of eyeglass, behind the ear (BTE), in the ear (ITE), and in the canal (ITC, CIC) hearing aids. A Widex 25 hearing aid from the 1950's made in Denmark. Brown and gold metallic casing with a volume control dial and an on/off switch. The curly wire runs to a circular outer disc. Although not present the disc would normally connect to an ear mould which is individually fitted to the wearer. The item comes in a soft leather case."DENMARK" inscribed on gold front. "WIDEX 25" inscribed on back. "WIDEX" on inside cover of case. "W" on outside cover of case device, hearing aid, loss, hard of hearing, deaf children australia, victorian school for deaf children, vsdc, denmark, widex

The first all transistor hearing aids appeared in 1953. They were created to replace vacuum tubes; they were small, required less battery power and had less distortion and heat than their predecessor. The vacuum tubes were typically hot and fragile, so the transistor was the ideal replacement. The size of these transistors led to developments in miniature, carbon microphones. These microphones could be mounted on various items. There were body hearing aids where the earpiece was connected to the hearing aid and battery pack worn on the body. Ear level hearing aids consisted of eyeglass, behind the ear (BTE), in the ear (ITE), and in the canal (ITC, CIC) hearing aids. A new aid type, the Calaid V, was introduced featuring a forward facing microphone, and three potentiometers for adjustment of maximum gain, maximum power output, and low frequency roll off. The Calaid V was introduced in the early 1980s and remained the most frequently used aid in NAL's service for the next ten years (From: THE CALAID: AUSTRALIA'S OWN HEARING AID by Laurie Upfold and Ray Piesse Single Behind-the-ear hearing aid. Provided and manufactured by the NAL (National Acoustic Laboratories), part of the Commonwealth Department of Health. "CALAID/V" on bottom face

The first all transistor hearing aids appeared in 1953. They were created to replace vacuum tubes; they were small, required less battery power and had less distortion and heat than their predecessor. The vacuum tubes were typically hot and fragile, so the transistor was the ideal replacement. The size of these transistors led to developments in miniature, carbon microphones. These microphones could be mounted on various items. There were body hearing aids where the earpiece was connected to the hearing aid and battery pack worn on the body. Ear level hearing aids consisted of eyeglass, behind the ear (BTE), in the ear (ITE), and in the canal (ITC, CIC) hearing aids. Part of the development of hearing aids Gold and burgundy metal casing, with an ear piece attached by wire. This is a body-worn hearing aid, with user instruction booklet. Manufactured by Rexton a subsidiary of Siemens."647 IV" on bottom of case, along with controls, "H N L" "M T O" and a numbered dial deaf children australia, hearing aid, rexton, siemens

The first all transistor hearing aids appeared in 1953. They were created to replace vacuum tubes; they were small, required less battery power and had less distortion and heat than their predecessor. The vacuum tubes were typically hot and fragile, so the transistor was the ideal replacement. The size of these transistors led to developments in miniature, carbon microphones. These microphones could be mounted on various items. There were body hearing aids where the earpiece was connected to the hearing aid and battery pack worn on the body. Ear level hearing aids consisted of eyeglass, behind the ear (BTE), in the ear (ITE), and in the canal (ITC, CIC) hearing aids. Tan plastic case hearing aid, with wire, ear piece and ear mold with metal clip. Made in England and sold by Myer Hearing Service. "MYER/HEARING SERVICE" engraved in gold on case. "MADE IN ENGLAND" on bottom of case. deaf children australia, hearing aid, myer hearing service

The first all transistor hearing aids appeared in 1953. They were created to replace vacuum tubes; they were small, required less battery power and had less distortion and heat than their predecessor. The vacuum tubes were typically hot and fragile, so the transistor was the ideal replacement. The size of these transistors led to developments in miniature, carbon microphones. These microphones could be mounted on various items. There were body hearing aids where the earpiece was connected to the hearing aid and battery pack worn on the body. Ear level hearing aids consisted of eyeglass, behind the ear (BTE), in the ear (ITE), and in the canal (ITC, CIC) hearing aids.Cream plastic hearing aid with metal back. Takes 3 batteries and there is a piece of paper in the battery case advising 'CAUTION'. Two round knobs on top, 'ON/OFF' and the other I assume is Volume. There is a plastic tag for attaching to a button (probably), headphone sockets. The front is metal lacework with a scrolled 'Z'"Z" on front. "ZEPHYR/HEARING AID/2546" on back. "U C"/"M"/"7777" on inside battery case.deaf children australia, hearing aid, zephyr hearing aid

Although Lee DeForest invented the triode vacuum  in 1906, it was not employed in hearing aids until 1921. The first hearing aid using a vacuum tube was purported to have been made by Earl C. Hanson. He called his hearing aid the Vactuphone. It used one small peanut tube (below right) to amplify the output of a carbon hearing aid. The Globe Hearing Aid Company and Western Electric collaborated to manufacture the Vactuphone. By the early 1940s, Raytheon had developed miniature vacuum tubes. It was these miniature vacuum tubes that made body-worn hearing aids a reality. Unfortunately, the power requirements of these aids made it necessary to use two relatively large batteries—an "A" battery to power the filaments of the vacuum tubes and a "B" battery to supply the high-voltage for the plate current. The batteries were worn external to the hearing aid itself and the name "Two-piece" hearing aid was used to describe them. Until about 1945 "Two-piece" hearing aids were the norm. However, improved vacuum tube design reduced current requirements. As a result, battery manufacturers were able to reduce the size of the batteries used in hearing aids. At the same time, electronic components were also being miniaturized. This allowed the hearing aid manufacturers to design hearing aids with internal batteries. After 1945, these "One-piece" hearing aids quickly replaced the more cumbersome "Two-piece" hearing aids. With continuing improvements in both batteries and components, hearing aids continued to reduce in size until 1953 when the vacuum tube was suddenly supplanted by the transistor.Fawn plastic hearing aid with metal clip on back and wires leading from the bottom. Made in the USA, sold by Angus & Coote as the Sole Australian Agents. The Model is the Sonotone 700. Two dials one on each of the top corners."ANGUS & COOTE/Sole Australian/Agents/C D C" Printed in black on the back, top left hand corner. "SONOTONE/700/SERIAL NO/843218/MAD IN U.S.A./SEE PATENT NOTICE/IN INSTRUCTION BOOK" imprinted on back, centre middle.deaf children australia, hearing aid, sonotone hearing aid, sonotone 700, angus & coote

This binders contains a collection of papers with information on a range of Deaf related subjects: Hearing Loss In Paget's Disease of Bone, Hearing Aids, Access Issues (for the Deaf), Hearing Aids and Mobile Phones, Audio-Psycho-Phonology, Medications used in treatment of Meniere's Disease, Perfect Pitch, Musicians earplugs and Monitors, etcWhite A4 Binder containing papers

"The Corriedale", by National Farm Aids Ltd, Rawalpindi, Pakistan, promoting the corriedale bred in Pakistan.R W Pettittcorriedale sheep sheep breeding, national farm aids ltd, pettitt, mr r. w., corriedale sheep, sheep breeding

First aid kits were kept in many households as transport wasn't always available and many people lived in isolation especially those on farms. This first aid kit was found under the floor of a home in Tawonga South.Wooden box with 2 steel hinges on the top and 2 steel clips and 2 steel rings at the front. The corners are reinforced with steel caps. When open the lid has 4 bottles of liquid (medicine?). The box is full of medical aids eg. bandages, scissors, etc.first aid kit

A brown folder titled "Visual Aids To Oral Teaching 5" (the number 7 has been crossed out and replaced by 5). From the files of Mr. L.J. Pryor. Former Principal of Bendigo Teachers' College. Donated to Education Resource Centre for Archival use 1992.bendigo, education, bendigo teachers' college, la trobe university bendigo collection, collection, bendigo, bendigo teachers' college, curriculum, teaching, education, mr. l.j. pryor, education resource centre, history - study and teaching, history

Displayed in History House. The King Regula III series were a range of 35mm viewfinder and rangefinder cameras made by King between 1956-1959. The Regula III series models all have a similar look and have a characteristic front plate. This is a flat rectangular Eloxal (ELectrolytic OXidation of ALuminum) plate, with distinctive chrome-black-chrome stripes each side. The King logo is at the top of the left-hand stripe, and a PC flash sync connector on the bottom right stripe. The other common things across the range are the film advance/film counter lever, a "cold" accessory shoe, rewind knob, 1/4" tripod socket, textured leatherette and having the model name engraved on the front of the camera. The film counter on all models is on the film advance lever but has a reliability issue, it relies on a tiny rod in the film advance lever, and a fixed rod on the camera body pushing against each other every time the lever is advanced; the problem is the rods are so small that they wear down with repeated use until the film counter stops working.Regula IIIa Camera Regula IIIa is a basic viewfinder camera with a Prontor-SVS shutter, but no focus aids, light meter, frame lines in the viewfinder or strap lugs on the body. 367.1 - Single lens reflex camera. 367.2 - Light metre in leather case. 367.3 - Brown leather case.Front: Regula-werk king KG/Bad Liebenzell/Prontor - SVS (on lens) Regula/IIIa (on body)camera, photography

This style of first aid kit was marketed to local sports clubs, and is socially and historically significant.First Aid Kit, dark brown heavy cardboard case with metal corner and edge reinforcing and metal clips. Including collapsible wooden splint, boracic lint, gauze, linen sling, castor oil,sal volatile, anteseptic, band-aids, adhesive tape and snake bite instructions.first, aid, kit