Cast iron company seal used by the South Deborah Gold Mines for official documents including shares, painted black with wooden handle and gold embellishments, painted on one side Sth.Deborah in white paint.gold mines, mining equipment, company seal, bendigo-companies-gold mines-south deborah

Black cast iron company seal for Deborah United Gold Mining Company used for official documents including shares, black enamelled cast iron with gold trim, painted on one side Deb United in white paint.gold mines, mining equipment, company seal, bendigo-companies-gold mines- deborah united

Black enamelled cast iron company seal for the Napoleon Reef Gold Mining Company used for official documents including shares, with gold trim and Napoleon Reefs.NL and Nap.Reef painted on sides in white paint.gold mines, mining equipment, company seal, bendigo-compaines-gold mines-napoleon reef

Black enamelled cast iron company seal for the Central Garden Gully Gold Mining Company, with gold trim and C.G.Gully painted on one side in white paint.gold mines, mining equipment, company seal, bendigo-companies-gold mines-central garden gully gold mining company

Black enamelled cast iron company seal for the Monument Hill Consolidated (Bendigo) mine, with gold trim and the name Mon.Con painted on one side in white paint.gold mines, mining equipment, company seal, bendigo-companies-gold mines-monument hill

Black enamelled cast iron company seal for the North Virginia Gold Mining Company with gold trim and the name N.Virginia painted on one side in white paint.gold mines, mining equipment, company seal, bendigo-companies-gold mines- north virginia

Large black enamelled cast iron company seal with wooden handle, red and gold decoration, seal is a general cross hatched pattern.gold mines, mining equipment, company seal, bendigo-companies-gold mines-seals

Dicker's Mining Record and Guide to the Gold Mines of Victoria; showing the bearings, depths, thicknesses and underlies pf the Auriferous Lodes. The progress and cost of works in operation; containing also a variety of valuable interesting and statistical information. Vol. 11 - 1862 - 3. Published by the proprietor, Thomas Dicker with 276 pages. Green hardcover bound in leather with gold lettering and paper.Thomas Dickergold mining, mining equipment, mining records, mining, gold mines, mining statistics, mining companies.

Black metal miners' lamp, rectangular base with 'pyramid' shaped, perforated, top section. Circular metal loop attached to top with metal pin. Glass sides with metal cross bar for protection. Candle holder inside lamp.gold mining, mining equipment, miners' lamp

Metal miners' 'spider', circular candle holder on side, half loop on side for resting 'spider'. Circular handle on end. Spike on one end. One continuous piece of metal forged to shape.gold mining, mining equipment, spider lamp

Bendigo clay crucible used for smelting, assaying and refining gold. Printed inside circular mark on side of crucible in black : 'Bendigo Clay Crucible' Large letter 'G' stamped in centre. Manufactured by Bendigo Pottery.gold mines, mining equipment, gold crucible

Bendigo clay crucible used for smelting, assaying and refining gold. Printed inside circular mark on side of crucible in black : 'Bendigo Clay Crucible' Large letter 'F' stamped in centre. denoting size. Manufactured by Bendigo Pottery.gold mines, mining equipment, gold crucible

Small, clay crucible bowls, used for smelting, assaying and refining gold. Pink discolouration inside crucible. Impressed on bottom of crucible "Battersea Works England' and number '3', denoting size, in centre of maker's name.Battersea Works Englandgold mines, mining equipment, gold crucible

Small clay crucible bowl used for smelting, assaying and refining gold. Maker's name impressed on bottom 'Battersea Works England ' and '2 ?1m', possibly denoting size of crucible.Battersea Works Englandgold mines, mining equipment, gold crucible

Small clay crucible used for smelting, assaying and refining gold. Maker's mark indecipherable on bottom of crucible.gold mines, mining equipment, gold crucible

Small gold crucible, bowl shape, used for smelting, assaying and refining gold. No maker's mark on base.gold mines, mining equipment, gold crucible

Clay gold crucible used for smelting, assaying and refining gold. Inside of crucible discoloured with brown and pale green mark. Maker's name on side: 'Juleff, number 78, (location indecipherable) England.Juleffgold mines, mining equipment, gold crucible

Black metal lamp with handle attached to top. Lamp is a rectangular shape with small curved section on top. Top of lamp hinged to allow access to inside section. No glass on side panels. Small cylindrical section in centre of inside section of lamp presumably to hold light source (candle?) Further research required re operation and provenance of lamp.gold mining, mining equipment, lamp

Gold bearing ore is pulverized by cast iron stampers (steam driven) and material then passes over a large copper plate covered in mercury causing the gold particles to combine with the mercury to form an amalgam which is scraped of and placed in a retort. The retort is heated causing the mercury to evaporate leaving the gold to be refined into ingots. The mercury is cooled as it leaves the retort and is reused. A second tray covered in what is called a blanket traps any fine gold that has passed the first plate. Finally the residue material goes over a vibrating table called a Wilfley Table which captures any iron pyrites which may contain about three percent gold. this is roasted and treated to recover any remaining gold at a special treatment plant.Wooden model of a five heads gold stamper battery. The gold stamper battery is a device for crushing ore. The parts of the battery are cams; dies; guides; kingposts; mortar box; shoes; stamps (or stampers); tappets. gold mining, mining equipment, gold stamper

Wooden model of a four heads gold stamper battery. The gold stamper battery is a device for crushing ore. The parts of the battery are: cams; dies; guides; kingposts; mortar box; shoes; stamps (or stampers); tappets. The model belt is broken and the brace on the left hand side facing the back is missing.gold mining, mining equipment, gold stamper

Black and white image of workmen at electro hydraulic dredge Snake Valley mine site. Image has been mounted on dark brown card. Electro hydraulic dredge Snake Valley Victoria 1909. J.M.C. Bennett was an engineer back at the main base, at Dawson's Dam on the Carngham Road, bet Linton and Snake Valley. These dredges were used for getting gold. The streams of water under high pressure just washed the hills and ground away. This dredge closed down early 1910. 200 H.P. Motors were used and 10 in. pumps.electro hydraulic dredge, dredging, sluicing, mining, gold, miners, mining equipment, snake valley

Article, Bendigo Advertiser 16th October 1970, on speech given by Professor Brian Lewis, lecturer in architecture, Melbourne University when addressing the Rotary Club of South Bendigo. He believed that ' Bendigo with its genuine gold history and availability of gold mining equipment was ideally situated to deveop this asset as a tourist attraction'.bendigo, mining, tourism

Letter 2 page with attachments, 1 February 1984 ,Southern Cross Machinery Ltd.,to Bendigo Mining, re pumping equipment for Central Deborah Mine. The 'offer for the supply and delivery of pumping equipment' is detailed in the letter. The Southern Cross submersible pump is costed at $7785.00, and the electrical control cubicvle at $1510, PVC insulated cable at $4.40 m. A brochure for the pump and the pump characteristic curves are appended.bendigo, gold mining, central deborah gold mine, bendigo, mining, gold mining, dewatering, pumping equipment, southern cross machinery, c. willman, bendigo mining nl.

Two black and white photographs associated with Donald Mather. .1) A man, Tom Davis stands surrounded with gold mining equipment such as gold pans, cradles, picks and buckets. He is at Oallen Ford on the Shoalhaven River, New South Wales .2) A man stands beside a ute with 2 women standing on the tray. The photo was taken after crossing a ford at Shoalhaven, New South Walesdonald mather, mather, shoalhaven river, mining, ute, utility, car, gold mining

Portable Compound Engine - Marshall & Son's. Builders Number 48317 Built by Marshall Sons & Co., Ltd., Gainsborough, England (Builder’s Number 48317 of approximately 1908/1909), to the order of Robison Brothers, Engineers, South Melbourne. It was used for operating a pump to supply irrigation water at Robinvale in Northern Victoria. Robison Bros & Co. P/L was founded by James McFarlane Robison and his brothers in 1854, initially as plumbers and coppersmiths, the firm expanded into general engineering, boiler-making and brass, iron and steel founders and became one of Melbourne's most important engineering firms. They constructed railway bridges, gold mining equipment, railway locomotives, pumping stations, brewing vessels, abattoir machinery, amongst much else and including the first turnstiles at the Melbourne Cricket Ground. A portable engine is either a steam engine or an internal combustion engine, that remains in one place while operating (providing power to machinery), and can be easily moved from one work site to another. Mounted on wheels or sometimes skids, it is required to be towed between work sites.Historic - Industrial Portable Compound Engine - steam engine - Marshall & Son's. Marshall & Son's Portable Compound Engine - Builders Number 48317 made of steel Marshall & Son's. Builders Number 48317puffing billy, state rivers and water supply commission of victoria, portable compound engine - marshall & son's., portable compound engine, marshall sons & co., ltd., robison bros & co. p/l

BHS CollectionDiggers & mining. The gold era. Equipment was gathered, and means of transport arranged. Slide shows miners gathering their equipment ready to start off. Markings 12 994.031 GOL:5. Used as a teaching aid.hanimounteducation, tertiary, goldfields

This photograph shows a piece of gold mining equipment identified as a mine winch, possibly an air winch cylinder of 1870s RG Ford's Patent design. Throughout the history of mining for gold and other precious materials, the windlass or winch (pictured) was used to bring up buckets full of soil from the bottom of a mine. This soil was then searched for gold/metals before being relocated to a different area. Due to the size and complexity of this particular piece of equipment, this winch may have been used to raise and lower mine carts to the entrance of the mine (often used in coal mining) and could have been used in raising cages up and down (acting as elevators) containing miners if the mine was particularly deep. The actual use of this particular item in the Beechworth locality is undocumented but these are some possibilities based on the use of these pieces of equipment in other mining locations. Mining can have a largely detrimental impact to the environment and therefore, the study of machinery like the one depicted in this photograph can help researches to reconstruct the methods and technologies used in the late 1800s and early 1900s. This particular item appears to have been removed from it's original site where it would have been used to assist with mining. It is possible that this photograph has been taken for recording purposes or as part of a machinery exhibition. Prior documentation records that this piece of equipment had connections to the Rocky Mountains Mining Company. Today, the Rocky Mountains Gold Mining company is famous in Beechworth for having been instrumental in the creation of the Rocky Mountain tunnel. Construction for this tunnel began in 1859 when a group of 12 men blasted a 400ft long tailrace though the rock beneath the town of Beechworth. Today, the 800ft tunnel, completed in 1871, is a popular tourist attraction but during the decades of gold mining, the purpose of this tunnel was to divert water away from the main sluicing operations so miners could better access gold and precious materials. The tunnel was used for this purpose for many years, later becoming useful for the Zwar Brother's tannery and currently as an outfall drain for Lake Sambell. This area continued to be mined until the early 1900s. The period when this item was in use is unclear but it is estimated to have been in the 1870s based on the design and appearance of the image. The gold works at the Rocky Mountain Tunnel closed in the early 1920s but the impact of mining remains in Beechworth today and therefore the study of photographs like this one which contain mining equipment can further understanding of mining in this region.This photograph has historic and research potential for study on the gold mining of the Beechworth region and types of equipment used to locate gold after the initial gold rush of 1853-1854 which resulted in the discovery of the surface gold and required miners to dig deeper to access precious metals. The clarity of the photo, and its good preserved condition, means it can continue to be used for research. This photo is part of a collection of six photos all within the Burke Museum Collection which depict mining equipment.Square black and white photograph on card.7793.1beechworth, mining, goldmining, goldmining equipment, beechworth burke museum

Langlands Company History: Langlands foundry was Melbourne's first foundry and iron shipbuilder established in 1842, only 8 years after the founding of the Victorian colony by two Scottish immigrants, Robert Langlands and Thomas Fulton, who had formed a partnership before emigrating (1813–1859). The business was known as the 'Langlands Foundry Co'. Henry Langlands (1794-1863), left Scotland in 1846 with his wife Christian, née Thoms, and five surviving children to join his brother Robert. By the time he arrived in early January of 1847 the partnership of Robert Langlands and Fulton had dissolved as Fulton had gone off to establish his own works. It was at this time that the two brothers took over ownership of Langlands foundry. Several years later Robert retired and Henry became sole the proprietor. The foundry was originally located on Flinders Lane between King and Spencer streets. Their sole machine tool, when they commenced as a business, was a small slide rest lathe turned by foot. In about 1865 they moved to the south side of the Yarra River, to the Yarra bank near the Spencer Street Bridge and then in about 1886 they moved to Grant Street, South Melbourne. The works employed as many as 350 workers manufacturing a wide range of marine, mining, civil engineering, railway and general manufacturing components including engines and boilers. The foundry prospered despite high wages and the lack of raw materials. It became known for high-quality products that competed successfully with any imported articles. By the time Henry retired, the foundry was one of the largest employers in Victoria and was responsible for casting the first bell and lamp-posts in the colony. The business was carried on by his sons after Henry's death. The company was responsible for fabricating the boiler for the first railway locomotive to operate in Australia, built-in 1854 by Robertson, Martin & Smith for the Melbourne and Hobson's Bay Railway Company. Also in the 1860s, they commenced manufacture of cast iron pipes for the Board of Works, which was then laying the first reticulated water supply system in Melbourne. Langlands was well known for its gold mining equipment, being the first company in Victoria to take up the manufacture of mining machinery, and it played an important role in equipping Victoria's and Australia's first mineral boom in the 1850s and 1860s. Langlands Foundry was an incubator for several engineers including Herbert Austin (1866–1941) who worked as a fitter at Langlands and went on to work on the Wolesely Shearing machine. He also founded the Austin Motor Company in 1905. Around the 1890s Langlands Foundry Co. declined and was bought up by the Austral Otis Co. in about 1893. History for Grimoldi: John Baptist Grimoldi was born in London UK. His Father was Domeneck Grimoldi, who was born in Amsterdam with an Italian Father and Dutch mother. Domeneck was also a scientific instrument maker. John B Grimoldi had served his apprenticeship to his older brother Henry Grimoldi in Brooke Street, Holburn, London and had emigrated from England to Australia to start his own meteorological and scientific instrument makers business at 81 Queens St Melbourne. He operated his business in 1862 until 1883 when it was brought by William Samuel and Charles Frederick, also well known scientific instrument makers who had emigrated to Melbourne in 1875. John Grimoldi became successful and made a number of high quality measuring instruments for the Meteorological Observatory in Melbourne. The barometer was installed at Warrnambool's old jetty and then the Breakwater as part of the Victorian Government's insistence that barometers be placed at all major Victorian ports. This coastal barometer is representative of barometers that were installed through this government scheme that began in 1866. The collecting of meteorological data was an important aspect of the Melbourne Observatory's work from its inception. Just as astronomy had an important practical role to play in navigation, timekeeping and surveying, so the meteorological service provided up to date weather information and forecasts that were essential for shipping and agriculture. As a result, instruments made by the early instrument makers of Australia was of significant importance to the development and safe trading of companies operating during the Victorian colonies early days. The provenance of this artefact is well documented and demonstrates, in particular, the importance of the barometer to the local fishermen and mariners of Warrnambool. This barometer is historically significant for its association with Langlands’ Foundry which pioneered technology in the developing colony by establishing the first ironworks in Melbourne founded in 1842. Also, it is significant for its connection to John B Grimoldi who made the barometer and thermometer housed in the cast iron case. Grimoldi, a successful meteorological and scientific instrument maker, arrived in the colony from England and established his business in 1862 becoming an instrument maker to the Melbourne Observatory. Additional significance is its completeness and for its rarity, as it is believed to be one of only two extant barometers of this type and in 1986 it was moved to Flagstaff Hill Maritime Village as part of its museum collection. Coast Barometer No. 8 is a tall, red painted cast iron pillar containing a vertical combined barometer and thermometer. Half way down in the cast iron framed glass door is a keyhole. Inside is a wooden case containing a mercury barometer at the top with a thermometer attached underneath, each with a separate glass window and a silver coloured metal backing plate. Just below the barometer, on the right-hand side, is a brass disc with a hole for a gauge key in the centre. The barometer has a silvered tin backing plate with a scale, in inches, of "27 to 31" on the right side and includes a Vernier with finer markings, which is set by turning the gauge key. The thermometer has a silvered tin backing plate with a scale on the left side of "30 to 140". Each of the scales has markings showing the units between the numbers.Inscription at the top front of the pillar reads "COAST BAROMETER" Inscribed on the bottom of the pillar is "No 8". and "LANGLANDS BROS & CO ENGINEERS MELBOURNE " The barometer backing plate is inscribed "COAST BAROMETER NO. 8, VICTORIA" and printed on the left of the scale, has "J GRIMOLDI" on the top and left of the scale, inscribed "Maker, MELBOURNE". There is an inscription on the bottom right-hand side of the thermometer scale, just above the 30 mark "FREEZING" Etched into the timber inside the case are the Roman numerals "VIII" (the number 8)flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, warrnambool breakwater, coast barometer, coastal barometer, barometer, weather warning, ports and harbours, fishery barometer, sea coast barometer, austral otis co, coast barometer no. 8, henry grimoldi, henry langlands, john baptist grimoldi, langlands foundry co, meteorological instrument maker, robert langlands, scientific instrument maker, thermometer, thomas fulton

This photo depicts a man standing next to a large piece of mining equipment identified as a hydraulic chisel (alternative name: drifter dill or power rock drill). This piece of machinery was used in mining to place holes in the walls of a mine which were then filled with dynamite or other explosives for rock blasting or to make holes for plug and feather quarrying. The additional tools to the right of the photograph and in front of the machinery can be identified as either picks or as feather and wedges, the latter of which were used to split stone drilled by the hydraulic or power chisel. Depending on the date of the photograph, which is not provided, this chisel was either powered by electricity or by hydraulics. The following is written on the drill "R.C. FORD'S PATENT No91 / MELBOURNE VICTORIA 1879". The man depicted in this photograph wears a wide brim hat, a loose fitting white shirt and loose pants. He wears boots and has a medium sized dark beard. This attire, along with his locality in the mine and proficiency with the mining equipment, identifies this man as a miner working in this particular, but unidentified, mine. It depicts an instance of hydraulic chiseling which makes this photograph valuable for the study of mining techniques from a date c1880.The search for gold is ingrained into the history of Victoria and therefore, images like this one which portray the types of machinery used in mining can reveal important information for technology and highlight the methods used to break apart the earth in order to obtain access to gold and other precious materials during the period this photograph was captured. Further research into RC Ford can potentially reveal even further information pertaining to this photograph. This image is of important historical significance for its ability to convey information about the methods and machinery used to access gold or mine more in general. It also highlights the size of machinery at the time and allows us to compare this to the size of the person standing besides the machinery to better understand the manpower which would have been required to use and set-up this macinery.A black and white rectangular reproduced photograph printed on matte photographic paper.Reverse: 7816/ copy 1/3gold, sluicing, gold sluicing, hydraulic sluicing, gold and tin mine, mining, gold mining, beechworth, burke museum, melbourne, victoria, hat, mining machinery, machinery, r. c. ford