Ward & Payne was founded in Sheffield by David Ward, an edge-tool manufacturer in 1803. The company had the name, David Ward. David Ward's son Edward joined the company around 1837 and the company name was changed to David Ward & Sons or David Ward & Co. Perhaps both names were used in succession it is unclear. Henry Payne appears as an edge tool maker in 1837 and joins the company before 1845. Perhaps he joined in 1837, as a result, this caused the name change to David Ward & Co. In 1843 Henry Payne registered the trademark name of Ward & Payne consisting of the crossed hammers above an anvil with W to the left and P to the right. Henry Payne became the junior partner in 1845 and died in 1850 and ownership of the company then reverted to the Ward family. After 1845 the firm built a large business in edge tools concentrating on carving tools, chisels, and gouges. Another David Ward (1835 - 1889), possibly the son of Edward Ward, took over the company in 1855 and was an aggressive young executive with the company before that. He grew the company's fortunes in both the sheep shearing scissor and carving tool businesses. The company grew and expanded its factory to a full city block and published a 501-page catalog in 1911. The company was still in business up to around 1970.A tool made by a well-known company and regarded today as a collector's item for those enthusiasts that collect vintage woodworking tools. However for further details regards provenance see the note in the provenance section this document.Socket chisel cast steel "Ward Cast steel" inscribed on blade flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, hand tool, ward chisel, woodwork chisel

Photograph of Ray Ward who was President of Melbourne Legacy in 1996 and an elderly widow - her badge says "Legacy Widows Club Mrytle Ingram" who was from Hastings club. Appears to be a professional photo taken at the same time as the individual picture of Ray at 00978. It appears to be at the widows luncheon at the Hyatt that follows the annual Widows' Sunday service at the Shrine, sometimes referred to as pilgrimage to the Shrine. See also 00887 and 00888.A record of the past presidents of Melbourne Legacy.Colour photo of President Ray Ward and an elderly widow.Handwritten "B&W 50%" in blue pen.past presidents, widows, widows' sunday

An adze is an ancient and versatile cutting tool and has been in use for thousands of years. Adze are similar to an axe but with the cutting edge perpendicular to the handle rather than parallel. They have been used since the Stone Age. Adzes are hand tools used for smoothing or carving wood. The subject item was made by Ward & Payne of the Limbrick Works at Hillsborough, Sheffield England manufacturers of hand-forged tools. Their trademark registered in 1850 was a Letter "W" & "P" stamped into the steel. The firm was established by David Ward (1767-1822) in 1803 the company became David Ward & Sons, in 1837 after Ward's son Edward joined the firm. In 1845 Henry Payne the founder's son-in-law became a partner but died in 1850 after which the company reverted to the Ward family. The business then concentrated on making carving tools, chisels and gouges. In 1882 David Ward's grandson David Ward Jr. (1835-1889) purchased land and built a factory at Sheffield North known as the "Limerick Wheel". For a time Wards operated from both 106-114 West Street Sheffield and at Limbrick Road, Hillsborough on the river Loxley. By 1911 they had expanded into making spades, forks, sheep shears and many other types of edged tools including drills and wood planes. In 1967 Wilkinson Sword purchased all the company's share capital and continued to sell Ward & Payne tools until 1970 when a fire burned the factory down and housing development was built on the site.The subject item is significant as it gives a snapshot of the technological development of sailing ships and their operation before steam-powered vessels took over around the world. Tools such as the subject item demonstrate the traditional craftsmanship and skill of the shipwright and the aesthetic quality of the timber ships designs of the time. Adze with wooden handle curved painted green with patent number and maker's name inscribed on inside curve of blade. Inscribed "Patd 561 Ward" "2w". flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, smoothing tool, hand tool, carpenders tool, adze, coopers tool, woodworking tools

Collection of leaflets comprising: Victorian Electoral Commission 2020 Council Election brochure for Bakewell Ward; individual leaflets for each of the four candidates: Mark Di Pasquale, Katie George, Brian Grace and Gary SammartinoCollection of five leaflets describing candidates for election to the City of Banyule Bakewell Ward election 2020elections, banyule city council, bakewell ward

The Cutty Sark is a British clipper ship which was built in Scotland in 1869. She made the trip between England and Australia carrying wool. The model was made by Thomas Ward, harbour master at Portland from 1885 - 1896.Ship's model in glass-fronted timber case. Presented as a diarama.Front: This model of the "Cutty Sark" was made by my grandfather 'Thomas Ward', Portland Harbour master 1885-1896. Signed Harry Ward Goldsmith (inside case, top left back).cutty sark, ship model, thomas ward

Lt-Col Williams was Commanding Officer of 4/19 Prince of Wales's Light Horse Regiment from 1975 to 1979One of a collection of portraits of former Commanding Officers of the RegimentFramed, self portrait, oil painting of Lt-Col J F Williamsportrait, williams

The photographic collection at the RCH has been identified as especially significant, and comparative research suggests that it is one of the biggest and most diverse visual records of children’s health held by any hospital in Australia. Spanning more than a century, the collection traces the changes in how children have been cared for. It also reveals the daily experiences of hospital staff and patients over its long history, and the deeply personal stories of medical care that can result in sorrow or relief.Black and white photograph mounted on cardboard in plastic sleeve"WARDS, CARLTON Medical Ward - Snowball Ward 1908" is written in pencil on reverse of photograph.

Frank Wright was a renown resident of Smeaton, where he was born on 2 August 1901. He lived at Laura Villa, and attended Smeaton State School. His father William was a gold miner and his mother's name was Sarah. Their family won many singing and instrumental awards. Frank was tutored by Percy Code and was awarded a gold medal for the highest marks in the ALCM examinations in the British Colonies at the age of seventeen years. He became the Australian Open Cornet Champion by the age of eighteen. A year later, Frank conducted the City of Ballarat Band, and later the Ballarat Soldiers’ Memorial Band. He formed the Frank Wright Frisco Band and Frank Wright and his Coliseum Orchestra. These bands won many South Street awards, and Frank as conductor won many awards in the Australian Band Championship contest. In 1933 Frank Wright sailed to England to conduct the famous St Hilda’s Band and was later appointed Musical Director of the London County Council, where he organized many amazing concerts in parks, in and around the London district. He was made Professor of Brass and Military Band Scoring and conducted at the Guildhall of Music and Drama. Frank was often invited to adjudicate Brass Band Championships around Europe, in Australia, including South Street and in New Zealand. The Frank Wright Medal at the Royal South Street competition is awarded to an individual recognized as making an outstanding contribution to brass music in Australia.This single sheet of paper with the black printed header of The National Band Festival, is a typed letter of reference for Frank Wright. It is signed by Founder and Director J Henry Iles.Signature in black penfrank wright, j henry iles, the national band festival, crystal palace, brass band

non-fictionQuarto sheet. Memo from A. J. Jones Wholesale Floristtunstall flower farm, jones flower farm

This lantern was made by Thomas Ward in 1884 for his daughter Alice Fawthrop Ward to see her way to the little church Wellington Road, where she played the organ for the mid week service. An early example of lighting used in the late 1800s. Additionally this particular light was made by Thomas Ward who was a part of a prominent family in Portland at the time. Thomas was part of the crew that went out to the Admella Shipwreck. The above mentioned church was built in 1870, and is now part of a private residence. Metal lantern painted cream. Round base with 6 rectangle shaped glass panels with 2 curved reinforced metal braces rounding the circumference of the body. One of the panels is a functioning door to allow candle access, door is secured by a thin pin with a ring pull to slide pin up and down. Top is domed with a decorative waves cap. Thin metal carry handle attached by two side braces. Cylinder holder in the base for a candle, and contains a small new looking candle.Hand written label: This lantern was made by Thomas Ward in 1884 for his daughter Alice Fawthrop Ward to see her way to the little church Wellington Road, where she played the organ for the mid week service.thomas ward, city of portland, lantern, alice ward, church, admella shipwreck, portland lifeboat

Office Stationery : Officer Ward Book 1908 The book contains approximately 200 pages. Only the front page and the first page contain writing. The rest of the pages contain faint lines in blue and red typical of early 20th century stationery. No information is written on these pages. While the exterior cover shows signs of tears, stains, dirt, fading, fraying and general wear and tear - it appears the book has had very little use. Handwritten - black ink Officers Ward Book 981 PRobin 81 = CL +Psalm Clancy Enplen Shropshire ward book, stationery

Letter on foolscap paper, typed on State of Victoria letterhead from the Premier R. J. Hamer to Mr. W. Aird, MMTB thanking the Board for its work on arrangements for the visit of the Queen and Duke of Edinburgh for the Jubilee year of her accession. Notes the work of Mr. N. Elliott. Dated 29/3/1977. Signed by R. J. Hamer as Premier. Has the received stamp of 30 March 1977 and the Chairman's stamp of the same date.trams, tramways, royal visit, victorian government, mmtb

J M Richards, the Editor of Architectural Review, writes to thank Robin Boyd for sending him a copy of 'Living in Australia'.Typewritten, one page

Notices to electors of Blackwood Ward. Includes city map with defined wards, list of polling places, candidate photographs and statements, voter eligibility and conditions for voting, Ward profile List of Streets and Results.city of whitehorse, seedsman, don, local government elections, white, david, way, kaele, van der heyde, sidney, athanasapoulos, michael, mckittrick, macdonald, terry, pierscionek, barbara, dixon, beverley

Notices of electors of Morack Ward. Includes city map with defined wards, list of polling places, candidate photographs and statements, voter eligibility and conditions for voting, Ward profile List of Streets and Resultscity of whitehorse, local government elections, dowey, robert, spurr, noel richard, bowie, bill, criddle, barbara, bhavnagri, nina, cooper, gary, chockalingam, karuppan